- 14 Aug, 2018 40 commits
-
-
Stefan Potyra authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 955bc613 upstream. According to the API, you may only call clk_get_rate() after actually enabling it. Found by Linux Driver Verification project (linuxtesting.org). Fixes: a5fd9139 ("w1: add 1-wire master driver for i.MX27 / i.MX31") Signed-off-by:
Stefan Potyra <Stefan.Potyra@elektrobit.com> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Hans de Goede authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 2cfce3a8 upstream. Commit 184add2c ("libata: Apply NOLPM quirk for SanDisk SD7UB3Q*G1001 SSDs") disabled LPM for SanDisk SD7UB3Q*G1001 SSDs. This has lead to several reports of users of that SSD where LPM was working fine and who know have a significantly increased idle power consumption on their laptops. Likely there is another problem on the T450s from the original reporter which gets exposed by the uncore reaching deeper sleep states (higher PC-states) due to LPM being enabled. The problem as reported, a hardfreeze about once a day, already did not sound like it would be caused by LPM and the reports of the SSD working fine confirm this. The original reporter is ok with dropping the quirk. A X250 user has reported the same hard freeze problem and for him the problem went away after unrelated updates, I suspect some GPU driver stack changes fixed things. TL;DR: The original reporters problem were triggered by LPM but not an LPM issue, so drop the quirk for the SSD in question. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1583207 Cc: stable@vger.kernel.org Cc: Richard W.M. Jones <rjones@redhat.com> Cc: Lorenzo Dalrio <lorenzo.dalrio@gmail.com> Reported-by:
Lorenzo Dalrio <lorenzo.dalrio@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Acked-by:
"Richard W.M. Jones" <rjones@redhat.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 18c9a99b upstream. We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes. Fixes: 21334205 ("libata: handle power transition of ODD") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 795ef788 upstream. Don't populate the arrays cdb on the stack, instead make them static. Makes the object code smaller by 230 bytes: Before: text data bss dec hex filename 3797 240 0 4037 fc5 drivers/ata/libata-zpodd.o After: text data bss dec hex filename 3407 400 0 3807 edf drivers/ata/libata-zpodd.o Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Tao Wang authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit c7d1f119 upstream. If the policy limits are updated via cpufreq_update_policy() and subsequently via sysfs, the limits stored in user_policy may be set incorrectly. For example, if both min and max are set via sysfs to the maximum available frequency, user_policy.min and user_policy.max will also be the maximum. If a policy notifier triggered by cpufreq_update_policy() lowers both the min and the max at this point, that change is not reflected by the user_policy limits, so if the max is updated again via sysfs to the same lower value, then user_policy.max will be lower than user_policy.min which shouldn't happen. In particular, if one of the policy CPUs is then taken offline and back online, cpufreq_set_policy() will fail for it due to a failing limits check. To prevent that from happening, initialize the min and max fields of the new_policy object to the ones stored in user_policy that were previously set via sysfs. Signed-off-by:
Kevin Wangtao <kevin.wangtao@hisilicon.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Subject & changelog ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Dennis Wassenberg authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 7eef32c1 upstream. This patch adds missing initialisation for HP 2013 UltraSlim Dock Line-In/Out PINs and activates keyboard mute/micmute leds for HP ProBook 640 G4 Signed-off-by:
Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Dennis Wassenberg authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 2861751f upstream. This patch adds missing initialisation for HP 2013 UltraSlim Dock Line-In/Out PINs and activates keyboard mute/micmute leds for HP EliteBook 830 G5 Signed-off-by:
-
Bo Chen authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit a3aa60d5 upstream. When 'kzalloc()' fails in 'snd_hda_attach_pcm_stream()', a new pcm instance is created without setting its operators via 'snd_pcm_set_ops()'. Following operations on the new pcm instance can trigger kernel null pointer dereferences and cause kernel oops. This bug was found with my work on building a gray-box fault-injection tool for linux-kernel-module binaries. A kernel null pointer dereference was confirmed from line 'substream->ops->open()' in function 'snd_pcm_open_substream()' in file 'sound/core/pcm_native.c'. This patch fixes the bug by calling 'snd_device_free()' in the error handling path of 'kzalloc()', which removes the new pcm instance from the snd card before returns with an error code. Signed-off-by:
Bo Chen <chenbo@pdx.edu> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Qu Wenruo authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit ac0b4145 upstream. [BUG] Btrfs can create compressed extent without checksum (even though it shouldn't), and if we then try to replace device containing such extent, the result device will contain all the uncompressed data instead of the compressed one. Test case already submitted to fstests: https://patchwork.kernel.org/patch/10442353/ [CAUSE] When handling compressed extent without checksum, device replace will goe into copy_nocow_pages() function. In that function, btrfs will get all inodes referring to this data extents and then use find_or_create_page() to get pages direct from that inode. The problem here is, pages directly from inode are always uncompressed. And for compressed data extent, they mismatch with on-disk data. Thus this leads to corrupted compressed data extent written to replace device. [FIX] In this attempt, we could just remove the "optimization" branch, and let unified scrub_pages() to handle it. Although scrub_pages() won't bother reusing page cache, it will be a little slower, but it does the correct csum checking and won't cause such data corruption caused by "optimization". Note about the fix: this is the minimal fix that can be backported to older stable trees without conflicts. The whole callchain from copy_nocow_pages() can be deleted, and will be in followup patches. Fixes: ff023aac ("Btrfs: add code to scrub to copy read data to another disk") CC: stable@vger.kernel.org # 4.4+ Reported-by:
James Harvey <jamespharvey20@gmail.com> Reviewed-by:
Qu Wenruo <wqu@suse.com> [ remove code removal, add note why ] Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Tetsuo Handa authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 84d0c27d upstream. syzbot is hitting WARN() at kernfs_add_one() [1]. This is because kernfs_create_link() is confused by previous device_add() call which continued without setting dev->kobj.parent field when get_device_parent() failed by memory allocation fault injection. Fix this by propagating the error from class_dir_create_and_add() to the calllers of get_device_parent(). [1] https://syzkaller.appspot.com/bug?id=fae0fb607989ea744526d1c082a5b8de6529116fSigned-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
syzbot <syzbot+df47f81c226b31d89fb1@syzkaller.appspotmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Jan Kara authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 4f2f76f7 upstream. ext4_resize_fs() has an off-by-one bug when checking whether growing of a filesystem will not overflow inode count. As a result it allows a filesystem with 8192 inodes per group to grow to 64TB which overflows inode count to 0 and makes filesystem unusable. Fix it. Cc: stable@vger.kernel.org Fixes: 3f8a6411Reported-by:
Jaco Kroon <jaco@uls.co.za> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
-
Lukas Czerner authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit eee597ac upstream. Currently in ext4_punch_hole we're going to skip the mtime update if there are no actual blocks to release. However we've actually modified the file by zeroing the partial block so the mtime should be updated. Moreover the sync and datasync handling is skipped as well, which is also wrong. Fix it. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
Joe Habermann <joe.habermann@quantum.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Frank van der Linden authored
BugLink: https://bugs.launchpad.net/bugs/1784382 [ Upstream commit 4fd44a98 ] commit 079096f1 ("tcp/dccp: install syn_recv requests into ehash table") introduced an optimization for the handling of child sockets created for a new TCP connection. But this optimization passes any data associated with the last ACK of the connection handshake up the stack without verifying its checksum, because it calls tcp_child_process(), which in turn calls tcp_rcv_state_process() directly. These lower-level processing functions do not do any checksum verification. Insert a tcp_checksum_complete call in the TCP_NEW_SYN_RECEIVE path to fix this. Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by:
Frank van der Linden <fllinden@amazon.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Tested-by:
Balbir Singh <bsingharora@gmail.com> Reviewed-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Xiangning Yu authored
BugLink: https://bugs.launchpad.net/bugs/1784382 [ Upstream commit eb55bbf8 ] There is a timing issue under active-standy mode, when bond_enslave() is called, bond->params.primary might not be initialized yet. Any time the primary slave string changes, bond->force_primary should be set to true to make sure the primary becomes the active slave. Signed-off-by:
Xiangning Yu <yuxiangning@gmail.com> Signed-off-by:
-
Daniel Glöckner authored
BugLink: https://bugs.launchpad.net/bugs/1784382 [ Upstream commit ebc3dd68 ] It has been observed that writing 0xF2 to the power register while it reads as 0xF4 results in the register having the value 0xF0, i.e. clearing RESUME and setting SUSPENDM in one go does not work. It might also violate the USB spec to transition directly from resume to suspend, especially when not taking T_DRSMDN into account. But this is what happens when a remote wakeup occurs between SetPortFeature USB_PORT_FEAT_SUSPEND on the root hub and musb_bus_suspend being called. This commit returns -EBUSY when musb_bus_suspend is called while remote wakeup is signalled and thus avoids to reset the RESUME bit. Ignoring this error when musb_port_suspend is called from musb_hub_control is ok. Signed-off-by:
Daniel Glöckner <dg@emlix.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Liu Bo authored
BugLink: https://bugs.launchpad.net/bugs/1784382 [ Upstream commit 8810f751 ] There is a scenario that can end up with rebuild process failing to return good content, i.e. suppose that all disks can be read without problems and if the content that was read out doesn't match its checksum, currently for raid6 btrfs at most retries twice, - the 1st retry is to rebuild with all other stripes, it'll eventually be a raid5 xor rebuild, - if the 1st fails, the 2nd retry will deliberately fail parity p so that it will do raid6 style rebuild, however, the chances are that another non-parity stripe content also has something corrupted, so that the above retries are not able to return correct content, and users will think of this as data loss. More seriouly, if the loss happens on some important internal btree roots, it could refuse to mount. This extends btrfs to do more retries and each retry fails only one stripe. Since raid6 can tolerate 2 disk failures, if there is one more failure besides the failure on which we're recovering, this can always work. The worst case is to retry as many times as the number of raid6 disks, but given the fact that such a scenario is really rare in practice, it's still acceptable. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 02db5571 upstream. While rcvbuf is properly clamped by tcp_rmem[2], rcvwin is left to a potentially too big value. It has no serious effect, since : 1) tcp_grow_window() has very strict checks. 2) window_clamp can be mangled by user space to any value anyway. tcp_init_buffer_space() and companions use tcp_full_space(), we use tcp_win_from_space() to avoid reloading sk->sk_rcvbuf Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Wei Wang <weiwan@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Sasha Levin authored
BugLink: https://bugs.launchpad.net/bugs/1784382 This reverts commit 95b286da. This commit used an incorrect log message. Reported-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Finn Thain authored
BugLink: https://bugs.launchpad.net/bugs/1784382 [ Upstream commit 26de0b76 ] With CONFIG_DMA_API_DEBUG=y, calling sonic_open() produces the message, "DMA-API: device driver failed to check map error". Add the missing dma_mapping_error() call. Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Acked-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Josh Hill authored
BugLink: https://bugs.launchpad.net/bugs/1784382 [ Upstream commit 2415f3bd ] Add support for Netgear Aircard 779S Signed-off-by:
Josh Hill <josh@joshuajhill.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Ivan Bornyakov authored
BugLink: https://bugs.launchpad.net/bugs/1784382 [ Upstream commit f9c6442a ] memcmp() returns int, but eprom_try_esi() cast it to unsigned char. One can lose significant bits and get 0 from non-0 value returned by the memcmp(). Signed-off-by:
Ivan Bornyakov <brnkv.i1@gmail.com> Signed-off-by:
-
Julian Anastasov authored
BugLink: https://bugs.launchpad.net/bugs/1784382 [ Upstream commit 52f96757 ] syzkaller reports for buffer overflow for interface name when starting sync daemons [1] What we do is that we copy user structure into larger stack buffer but later we search NUL past the stack buffer. The same happens for sched_name when adding/editing virtual server. We are restricted by IP_VS_SCHEDNAME_MAXLEN and IP_VS_IFNAME_MAXLEN being used as size in include/uapi/linux/ip_vs.h, so they include the space for NUL. As using strlcpy is wrong for unsafe source, replace it with strscpy and add checks to return EINVAL if source string is not NUL-terminated. The incomplete strlcpy fix comes from 2.6.13. For the netlink interface reduce the len parameter for IPVS_DAEMON_ATTR_MCAST_IFN and IPVS_SVC_ATTR_SCHED_NAME, so that we get proper EINVAL. [1] kernel BUG at lib/string.c:1052! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 373 Comm: syz-executor936 Not tainted 4.17.0-rc4+ #45 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:fortify_panic+0x13/0x20 lib/string.c:1051 RSP: 0018:ffff8801c976f800 EFLAGS: 00010282 RAX: 0000000000000022 RBX: 0000000000000040 RCX: 0000000000000000 RDX: 0000000000000022 RSI: ffffffff8160f6f1 RDI: ffffed00392edef6 RBP: ffff8801c976f800 R08: ffff8801cf4c62c0 R09: ffffed003b5e4fb0 R10: ffffed003b5e4fb0 R11: ffff8801daf27d87 R12: ffff8801c976fa20 R13: ffff8801c976fae4 R14: ffff8801c976fae0 R15: 000000000000048b FS: 00007fd99f75e700(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200001c0 CR3: 00000001d6843000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: strlen include/linux/string.h:270 [inline] strlcpy include/linux/string.h:293 [inline] do_ip_vs_set_ctl+0x31c/0x1d00 net/netfilter/ipvs/ip_vs_ctl.c:2388 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x7d/0xd0 net/netfilter/nf_sockopt.c:115 ip_setsockopt+0xd8/0xf0 net/ipv4/ip_sockglue.c:1253 udp_setsockopt+0x62/0xa0 net/ipv4/udp.c:2487 ipv6_setsockopt+0x149/0x170 net/ipv6/ipv6_sockglue.c:917 tcp_setsockopt+0x93/0xe0 net/ipv4/tcp.c:3057 sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3046 __sys_setsockopt+0x1bd/0x390 net/socket.c:1903 __do_sys_setsockopt net/socket.c:1914 [inline] __se_sys_setsockopt net/socket.c:1911 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x447369 RSP: 002b:00007fd99f75dda8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00000000006e39e4 RCX: 0000000000447369 RDX: 000000000000048b RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000018 R09: 0000000000000000 R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000006e39e0 R13: 75a1ff93f0896195 R14: 6f745f3168746576 R15: 0000000000000001 Code: 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 48 89 df e8 d2 8f 48 fa eb de 55 48 89 fe 48 c7 c7 60 65 64 88 48 89 e5 e8 91 dd f3 f9 <0f> 0b 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41 56 RIP: fortify_panic+0x13/0x20 lib/string.c:1051 RSP: ffff8801c976f800 Reported-and-tested-by: syzbot+aac887f77319868646df@syzkaller.appspotmail.com Fixes: e4ff6751 ("ipvs: add sync_maxlen parameter for the sync daemon") Fixes: 4da62fc7 ("[IPVS]: Fix for overflows") Signed-off-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Paolo Abeni authored
BugLink: https://bugs.launchpad.net/bugs/1784382 [ Upstream commit 94c752f9 ] strlcpy() can't be safely used on a user-space provided string, as it can try to read beyond the buffer's end, if the latter is not NULL terminated. Leveraging the above, syzbot has been able to trigger the following splat: BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline] BUG: KASAN: stack-out-of-bounds in compat_mtw_from_user net/bridge/netfilter/ebtables.c:1957 [inline] BUG: KASAN: stack-out-of-bounds in ebt_size_mwt net/bridge/netfilter/ebtables.c:2059 [inline] BUG: KASAN: stack-out-of-bounds in size_entry_mwt net/bridge/netfilter/ebtables.c:2155 [inline] BUG: KASAN: stack-out-of-bounds in compat_copy_entries+0x96c/0x14a0 net/bridge/netfilter/ebtables.c:2194 Write of size 33 at addr ffff8801b0abf888 by task syz-executor0/4504 CPU: 0 PID: 4504 Comm: syz-executor0 Not tainted 4.17.0-rc2+ #40 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 memcpy+0x37/0x50 mm/kasan/kasan.c:303 strlcpy include/linux/string.h:300 [inline] compat_mtw_from_user net/bridge/netfilter/ebtables.c:1957 [inline] ebt_size_mwt net/bridge/netfilter/ebtables.c:2059 [inline] size_entry_mwt net/bridge/netfilter/ebtables.c:2155 [inline] compat_copy_entries+0x96c/0x14a0 net/bridge/netfilter/ebtables.c:2194 compat_do_replace+0x483/0x900 net/bridge/netfilter/ebtables.c:2285 compat_do_ebt_set_ctl+0x2ac/0x324 net/bridge/netfilter/ebtables.c:2367 compat_nf_sockopt net/netfilter/nf_sockopt.c:144 [inline] compat_nf_setsockopt+0x9b/0x140 net/netfilter/nf_sockopt.c:156 compat_ip_setsockopt+0xff/0x140 net/ipv4/ip_sockglue.c:1279 inet_csk_compat_setsockopt+0x97/0x120 net/ipv4/inet_connection_sock.c:1041 compat_tcp_setsockopt+0x49/0x80 net/ipv4/tcp.c:2901 compat_sock_common_setsockopt+0xb4/0x150 net/core/sock.c:3050 __compat_sys_setsockopt+0x1ab/0x7c0 net/compat.c:403 __do_compat_sys_setsockopt net/compat.c:416 [inline] __se_compat_sys_setsockopt net/compat.c:413 [inline] __ia32_compat_sys_setsockopt+0xbd/0x150 net/compat.c:413 do_syscall_32_irqs_on arch/x86/entry/common.c:323 [inline] do_fast_syscall_32+0x345/0xf9b arch/x86/entry/common.c:394 entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7fb3cb9 RSP: 002b:00000000fff0c26c EFLAGS: 00000282 ORIG_RAX: 000000000000016e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000000000 RDX: 0000000000000080 RSI: 0000000020000300 RDI: 00000000000005f4 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 The buggy address belongs to the page: page:ffffea0006c2afc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x2fffc0000000000() raw: 02fffc0000000000 0000000000000000 0000000000000000 00000000ffffffff raw: 0000000000000000 ffffea0006c20101 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Fix the issue replacing the unsafe function with strscpy() and taking care of possible errors. Fixes: 81e675c2 ("netfilter: ebtables: add CONFIG_COMPAT support") Reported-and-tested-by: syzbot+4e42a04e0bc33cb6c087@syzkaller.appspotmail.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1784382 [ Upstream commit d9f92772 ] syzbot found a way to trigger an infinitie loop by overflowing @offset variable that has been forced to use u16 for some very obscure reason in the past. We probably want to look at NEXTHDR_FRAGMENT handling which looks wrong, in a separate patch. In net-next, we shall try to use skb_header_pointer() instead of pskb_may_pull(). watchdog: BUG: soft lockup - CPU#1 stuck for 134s! [syz-executor738:4553] Modules linked in: irq event stamp: 13885653 hardirqs last enabled at (13885652): [<ffffffff878009d5>] restore_regs_and_return_to_kernel+0x0/0x2b hardirqs last disabled at (13885653): [<ffffffff87800905>] interrupt_entry+0xb5/0xf0 arch/x86/entry/entry_64.S:625 softirqs last enabled at (13614028): [<ffffffff84df0809>] tun_napi_alloc_frags drivers/net/tun.c:1478 [inline] softirqs last enabled at (13614028): [<ffffffff84df0809>] tun_get_user+0x1dd9/0x4290 drivers/net/tun.c:1825 softirqs last disabled at (13614032): [<ffffffff84df1b6f>] tun_get_user+0x313f/0x4290 drivers/net/tun.c:1942 CPU: 1 PID: 4553 Comm: syz-executor738 Not tainted 4.17.0-rc3+ #40 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:check_kcov_mode kernel/kcov.c:67 [inline] RIP: 0010:__sanitizer_cov_trace_pc+0x20/0x50 kernel/kcov.c:101 RSP: 0018:ffff8801d8cfe250 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffff8801d88a8080 RBX: ffff8801d7389e40 RCX: 0000000000000006 RDX: 0000000000000000 RSI: ffffffff868da4ad RDI: ffff8801c8a53277 RBP: ffff8801d8cfe250 R08: ffff8801d88a8080 R09: ffff8801d8cfe3e8 R10: ffffed003b19fc87 R11: ffff8801d8cfe43f R12: ffff8801c8a5327f R13: 0000000000000000 R14: ffff8801c8a4e5fe R15: ffff8801d8cfe3e8 FS: 0000000000d88940(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffff600400 CR3: 00000001acab3000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: _decode_session6+0xc1d/0x14f0 net/ipv6/xfrm6_policy.c:150 __xfrm_decode_session+0x71/0x140 net/xfrm/xfrm_policy.c:2368 xfrm_decode_session_reverse include/net/xfrm.h:1213 [inline] icmpv6_route_lookup+0x395/0x6e0 net/ipv6/icmp.c:372 icmp6_send+0x1982/0x2da0 net/ipv6/icmp.c:551 icmpv6_send+0x17a/0x300 net/ipv6/ip6_icmp.c:43 ip6_input_finish+0x14e1/0x1a30 net/ipv6/ip6_input.c:305 NF_HOOK include/linux/netfilter.h:288 [inline] ip6_input+0xe1/0x5e0 net/ipv6/ip6_input.c:327 dst_input include/net/dst.h:450 [inline] ip6_rcv_finish+0x29c/0xa10 net/ipv6/ip6_input.c:71 NF_HOOK include/linux/netfilter.h:288 [inline] ipv6_rcv+0xeb8/0x2040 net/ipv6/ip6_input.c:208 __netif_receive_skb_core+0x2468/0x3650 net/core/dev.c:4646 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4711 netif_receive_skb_internal+0x126/0x7b0 net/core/dev.c:4785 napi_frags_finish net/core/dev.c:5226 [inline] napi_gro_frags+0x631/0xc40 net/core/dev.c:5299 tun_get_user+0x3168/0x4290 drivers/net/tun.c:1951 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1996 call_write_iter include/linux/fs.h:1784 [inline] do_iter_readv_writev+0x859/0xa50 fs/read_write.c:680 do_iter_write+0x185/0x5f0 fs/read_write.c:959 vfs_writev+0x1c7/0x330 fs/read_write.c:1004 do_writev+0x112/0x2f0 fs/read_write.c:1039 __do_sys_writev fs/read_write.c:1112 [inline] __se_sys_writev fs/read_write.c:1109 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1109 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Alex Williamson authored
BugLink: http://bugs.launchpad.net/bugs/1779830 INTx masking has two components, the first is that we need the ability to prevent the device from continuing to assert INTx. This is provided via the DisINTx bit in the command register and is the only thing we can really probe for when testing if INTx masking is supported. The second component is that the device needs to indicate if INTx is asserted via the interrupt status bit in the device status register. With these two features we can generically determine if one of the devices we own is asserting INTx, signal the user, and mask the interrupt while the user services the device. Generally if one or both of these components is broken we resort to APIC level interrupt masking, which requires an exclusive interrupt since we have no way to determine the source of the interrupt in a shared configuration. This often makes it difficult or impossible to configure the system for userspace use of the device, for an interrupt mode that the user may not need. One possible configuration of broken INTx masking is that the DisINTx support is fully functional, but the interrupt status bit never signals interrupt assertion. In this case we do have the ability to prevent the device from asserting INTx, but lack the ability to identify the interrupt source. For this case we can simply pretend that the device lacks INTx support entirely, keeping DisINTx set on the physical device, virtualizing this bit for the user, and virtualizing the interrupt pin register to indicate no INTx support. We already support virtualization of the DisINTx bit and already virtualize the interrupt pin for platforms without INTx support. By tying these components together, setting DisINTx on open and reset, and identifying devices broken in this particular way, we can provide support for them w/o the handicap of APIC level INTx masking. Intel i40e (XL710/X710) 10/20/40GbE NICs have been identified as being broken in this specific way. We leave the vfio-pci.nointxmask option as a mechanism to bypass this support, enabling INTx on the device with all the requirements of APIC level masking. Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> (cherry picked from commit 45074405) Signed-off-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by:
-
Colin Ian King authored
BugLink: http://bugs.launchpad.net/bugs/1781364 This is a sync of zfs 0.6.5.6-0ubuntu25 that fixes a mount/umount deadlock for upstream ZFS commit ac09630d8b0b ("Fix zpl_mount() deadlock") ZFS commit 93b43af inadvertently introduced the following scenario which can result in a deadlock. This issue was most easily reproduced by LXD containers using a ZFS storage backend but should be reproducible under any workload which is frequently mounting and unmounting. -- THREAD A -- spa_sync() spa_sync_upgrades() rrw_enter(&dp->dp_config_rwlock, RW_WRITER, FTAG); <- Waiting on B -- THREAD B -- mount_fs() zpl_mount() zpl_mount_impl() dmu_objset_hold() dmu_objset_hold_flags() dsl_pool_hold() dsl_pool_config_enter() rrw_enter(&dp->dp_config_rwlock, RW_READER, tag); sget() sget_userns() grab_super() down_write(&s->s_umount); <- Waiting on C -- THREAD C -- cleanup_mnt() deactivate_super() down_write(&s->s_umount); deactivate_locked_super() zpl_kill_sb() kill_anon_super() generic_shutdown_super() sync_filesystem() zpl_sync_fs() zfs_sync() zil_commit() txg_wait_synced() <- Waiting on A Signed-off-by:
Brian Behlendorf <behlendorf1@llnl.gov> (backport from ZFS upstream commit ac09630d8b0bf6c92084a30fdaefd03fd0adbdc1) Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Acked-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1759848 Currently mounting an already mounted zfs dataset results in an error, whereas it is typically allowed with other filesystems. This causes some bad interactions with mount namespaces. Take this sequence for example: - Create a dataset - Create a snapshot of the dataset - Create a clone of the snapshot - Create a new mount namespace - Rename the original dataset The rename results in unmounting and remounting the clone in the original mount namespace, however the remount fails because the dataset is still mounted in the new mount namespace. (Note that this means the mount in the new mount namespace is never being unmounted, so perhaps the unmount/remount of the clone isn't actually necessary.) The problem here is a result of the way mounting is implemented in the kernel module. Since it is not mounting block devices it uses mount_nodev() instead of the usual mount_bdev(). However, mount_nodev() is written for filesystems for which each mount is a new instance (i.e. a new super block), and zfs should be able to detect when a mount request can be satisfied using an existing super block. Change zpl_mount() to call sget() directly with it's own test callback. Passing the objset_t object as the fs data allows checking if a superblock already exists for the dataset, and in that case we just need to return a new reference for the sb's root dentry. [ Sync'd from zfsutils-linux, from a patch by Seth Forshee and backported to zfs 0.6.5.6. Note that this also contains some zfstutils changes between 0.6.5.6-0ubuntu20 and 0.6.5.6-0ubuntu24 which go also sync'd into this fix, which is expected part of the zfs sync'ing ] Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Acked-by:
-
Shankara Pailoor authored
CVE-2018-12233 The code is assuming the buffer is max_size length, but we weren't allocating enough space for it. Signed-off-by:
Shankara Pailoor <shankarapailoor@gmail.com> Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> (cherry picked from commit 92d34134) Signed-off-by:
Paolo Pisati <paolo.pisati@canonical.com> Acked-by:
-
Siva Rebbagondla authored
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1773410 BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1777850 Kernel panic is observed when network manager is stopped or Interface is is DOWN, while system is entering into hibernation. The root cause of the issue is scan work function keeps running even after cancel_hw_scan() call. Issue is resolved by calling cancel_work_sync(). ...skipping... [ 1171.913244] BUG: unable to handle page request at 00000000001067e38 [ 1171.913248] IP: cfg80211_scan_done+0xb0/0xc0 [cfg80211] [ 1171.913554] Hardware name: Dell Inc. Edge Gateway 3003/ , BIOS 01.00.06 01/22/2018 [ 1171.913668] Workqueue: phy1 ieee80211_scan_work [mac80211] [ 1171.913773] RIP: 0010:cfg80211_scan_done+0xb0/0xc0 [cfg80211] [ 1171.913780] RSP: 0018:ffffc1fe41b47dc8 EFLAGS: 00010286 [ 1171.913789] RAX: 0000000000000001 RBX: ffffffffc0e60120 RCX: 0000000100080006 [ 1171.913794] RDX: ffff9eeab7e3bc58 RSI: ffff9eeab0c69080 RDI: ffff9eeab7e3bc00 [ 1171.913799] RBP: ffff9eeab7e3bc00 R08: 00000000b7e3b201 R09: 0000000100080006 [ 1171.913805] R10: ffffc1fe41b47d20 R11: 0000000000000000 R12: ffff9eeab0c69080 [ 1171.913810] R13: 0000000000000022 R14: ffff9eeab0c68760 R15: ffff9eeab7af3c00 [ 1171.913817] FS: 0000000000000000(0000) GS:ffff9eeab0000000(0000) knlGS:0000000000000000 [ 1171.913823] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1171.913828] CR2: 00007f76c73ac190 CR3: 000000006e20a000 CR4: 00000000001006f0 [ 1171.913833] Call Trace: [ 1171.913864] ? rsi_mac80211_sta_remove+0x260/0x260 [rsi_91x] [ 1171.913971] __ieee80211_scan_completed+0xb1/0x390 [mac80211] [ 1171.914078] ieee80211_scan_work+0x7e/0x480 [mac80211] [ 1171.914098] process_one_work+0x142/0x3d0 [ 1171.914111] worker_thread+0x229/0x440 [ 1171.914122] kthread+0xf5/0x130 [ 1171.914132] ? process_one_work+0x3d0/0x3d0 [ 1171.914140] ? kthread_associate_blkcg+0x90/0x90 [ 1171.914152] ret_from_fork+0x35/0x40 Signed-off-by:
Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Acked-by:
Anthony Wong <anthony.wong@canonical.com> Acked-by:
Shrirang Bagul <shrirang.bagul@canonical.com> Signed-off-by:
-
Shrirang Bagul authored
BugLink: http://bugs.launchpad.net/bugs/1783241 The support for IXXAT USB SocketCAN devices was introduced in: cddf5820 UBUNTU: SAUCE: (no-up) Support IXXAT USB SocketCAN device This patch upgrades the driver with following changes: - support adapters for CL1 (Communication Layer for legacy devices) and CL2 (current devices) - removed CAN-IDM100 support (Microchip Rev A microcontroller) - add CAN-IDM101 support (Microchip Rev B microcontroller) - add Error-Passive recognition - move CAN message handling to the core module - use ktime API for timestamps - fixes Linux kernel coding style issues Changes from HMS/Dell's original driver dump "arev-2018-07-04": - driver name retained from "beta-2018-05-07" for debain packaging compatibility IXXAT_USB_DRIVER_NAME "ixxat_usb2can" ->"ixx_usb" - source files renamed to retain the old names SRU'ed for "beta-2018-05-07" renamed: ixxat_usb_cl1.c -> ixx_usb_cl1.c renamed: ixxat_usb_cl2.c -> ixx_usb_cl2.c renamed: ixxat_usb_core.c -> ixx_usb_core.c renamed: ixxat_usb_core.h -> ixx_usb_core.h deleted: ixx_usb_fd.c deleted: ixx_usb_v2.c Signed-off-by:
Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by:
-
Eric Sandeen authored
CVE-2018-13094 xfs_attr3_leaf_create may have errored out before instantiating a buffer, for example if the blkno is out of range. In that case there is no work to do to remove it, and in fact xfs_da_shrink_inode will lead to an oops if we try. This also seems to fix a flaw where the original error from xfs_attr3_leaf_create gets overwritten in the cleanup case, and it removes a pointless assignment to bp which isn't used after this. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199969Reported-by:
Xu, Wen <wen.xu@gatech.edu> Tested-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by:
Aaron Ma <aaron.ma@canonical.com> Signed-off-by:
-
Linus Torvalds authored
BugLink: https://launchpad.net/bugs/1779923 CVE-2018-13405 sgid directories have special semantics, making newly created files in the directory belong to the group of the directory, and newly created subdirectories will also become sgid. This is historically used for group-shared directories. But group directories writable by non-group members should not imply that such non-group members can magically join the group, so make sure to clear the sgid bit on non-directories for non-members (but remember that sgid without group execute means "mandatory locking", just to confuse things even more). Reported-by:
Jann Horn <jannh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> (cherry picked from commit 0fa3ecd8) Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Acked-by:
-
Paolo Pisati authored
BugLink: http://bugs.launchpad.net/bugs/1782116 The Ubuntu kernel source code depends on the presence of the retpoline-extract-one file in the script directory during build (see scripts/Makefile.build::cmd_ubuntu_retpoline) - such a file lives in the debian directory and is copied to scripts during the 'debian/rules clean' phase. Snapcraft is oblivious to the debian details, and the clean target is never invoked, breaking the normal kernel build (make defconfig; make ...). To workaround that, before starting the build, make snapcraft do the copy and fix the build. Signed-off-by:
-
Bert Kenward authored
BugLink: https://bugs.launchpad.net/bugs/1783152 Also add support for 7000 series 40G NIC VF. Signed-off-by:
Bert Kenward <bkenward@solarflare.com> Signed-off-by:
Mauricio Faria de Oliveira <mauricio.oliveira@canonical.com> Acked-by:
-
Bert Kenward authored
BugLink: https://bugs.launchpad.net/bugs/1783152 The Solarflare 8000 series NIC will use a new TSO scheme. The current driver refuses to load if the current TSO scheme is not found. Remove that check and instead make the TSO version a per-queue parameter. Signed-off-by:
-
Siva Rebbagondla authored
BugLink: https://bugs.launchpad.net/bugs/1777858 While running regressions, observed below kernel panic when sdio disconnect called. The root cause of this issue is, kthread_stop() is taking care of wait_for_completion() by default. Hence, removing wait_for_completion() from rsi_disconnect(). ... skipping ... BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff810a63df>] exit_creds+0x1f/0x50 PGD 0 Oops: 0002 [#1] SMP CPU: 0 PID: 6502 Comm: rmmod Tainted: G OE 4.4.0-128-generic #154-Ubuntu Hardware name: Dell Inc. Edge Gateway 3003/ , BIOS 01.00.00 04/17/2017 Stack: ffff88007392e600 ffff880075847dc0 ffffffff8108160a 0000000000000000 ffff88007392e600 ffff880075847de8 ffffffff810a484b ffff880076127000 ffff88003cd3a800 ffff880074f12a00 ffff880075847e28 ffffffffc09bed15 Call Trace: [<ffffffff8108160a>] __put_task_struct+0x5a/0x140 [<ffffffff810a484b>] kthread_stop+0x10b/0x110 [<ffffffffc09bed15>] rsi_disconnect+0x2f5/0x300 [ven_rsi_sdio] [<ffffffff81578bcb>] ? __pm_runtime_resume+0x5b/0x80 [<ffffffff816f0918>] sdio_bus_remove+0x38/0x100 [<ffffffff8156cc64>] __device_release_driver+0xa4/0x150 [<ffffffff8156d7a5>] driver_detach+0xb5/0xc0 [<ffffffff8156c6c5>] bus_remove_driver+0x55/0xd0 [<ffffffff8156dfbc>] driver_unregister+0x2c/0x50 [<ffffffff816f0b8a>] sdio_unregister_driver+0x1a/0x20 [<ffffffffc09bf0f5>] rsi_module_exit+0x15/0x30 [ven_rsi_sdio] [<ffffffff8110cad8>] SyS_delete_module+0x1b8/0x210 [<ffffffff81851dc8>] entry_SYSCALL_64_fastpath+0x1c/0xbb Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1777389Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
-
Michael Ellerman authored
BugLink: https://bugs.launchpad.net/bugs/1777389 commit 1411b521 upstream. In the vmx AES init routines we do a printk(KERN_INFO ...) to report the fallback implementation we're using. However with a slow console this can significantly affect the speed of crypto operations. Using 'cryptsetup benchmark' the removal of the printk() leads to a ~5x speedup for aes-cbc decryption. So remove them. Fixes: 8676590a ("crypto: vmx - Adding AES routines for VMX module") Fixes: 8c755ace ("crypto: vmx - Adding CBC routines for VMX module") Fixes: 4f7f60d3 ("crypto: vmx - Adding CTR routines for VMX module") Fixes: cc333cd6 ("crypto: vmx - Adding GHASH routines for VMX module") Cc: stable@vger.kernel.org # v4.1+ Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Ethan Lee authored
BugLink: https://bugs.launchpad.net/bugs/1777389 commit 5ca4d1ae upstream. GPD Win 2 Website: http://www.gpd.hk/gpdwin2.asp Tested on a unit from the first production run sent to Indiegogo backers Signed-off-by:
Ethan Lee <flibitijibibo@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Gil Kupfer authored
BugLink: https://bugs.launchpad.net/bugs/1777389 commit b23220fe upstream. The balloon.page field is used for two different purposes if batching is on or off. If batching is on, the field point to the page which is used to communicate with with the hypervisor. If it is off, balloon.page points to the page that is about to be (un)locked. Unfortunately, this dual-purpose of the field introduced a bug: when the balloon is popped (e.g., when the machine is reset or the balloon driver is explicitly removed), the balloon driver frees, unconditionally, the page that is held in balloon.page. As a result, if batching is disabled, this leads to double freeing the last page that is sent to the hypervisor. The following error occurs during rmmod when kernel checkers are on, and the balloon is not empty: [ 42.307653] ------------[ cut here ]------------ [ 42.307657] Kernel BUG at ffffffffba1e4b28 [verbose debug info unavailable] [ 42.307720] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC [ 42.312512] Modules linked in: vmw_vsock_vmci_transport vsock ppdev joydev vmw_balloon(-) input_leds serio_raw vmw_vmci parport_pc shpchp parport i2c_piix4 nfit mac_hid autofs4 vmwgfx drm_kms_helper hid_generic syscopyarea sysfillrect usbhid sysimgblt fb_sys_fops hid ttm mptspi scsi_transport_spi ahci mptscsih drm psmouse vmxnet3 libahci mptbase pata_acpi [ 42.312766] CPU: 10 PID: 1527 Comm: rmmod Not tainted 4.12.0+ #5 [ 42.312803] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 09/30/2016 [ 42.313042] task: ffff9bf9680f8000 task.stack: ffffbfefc1638000 [ 42.313290] RIP: 0010:__free_pages+0x38/0x40 [ 42.313510] RSP: 0018:ffffbfefc163be98 EFLAGS: 00010246 [ 42.313731] RAX: 000000000000003e RBX: ffffffffc02b9720 RCX: 0000000000000006 [ 42.313972] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9bf97e08e0a0 [ 42.314201] RBP: ffffbfefc163be98 R08: 0000000000000000 R09: 0000000000000000 [ 42.314435] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffc02b97e4 [ 42.314505] R13: ffffffffc02b9748 R14: ffffffffc02b9728 R15: 0000000000000200 [ 42.314550] FS: 00007f3af5fec700(0000) GS:ffff9bf97e080000(0000) knlGS:0000000000000000 [ 42.314599] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 42.314635] CR2: 00007f44f6f4ab24 CR3: 00000003a7d12000 CR4: 00000000000006e0 [ 42.314864] Call Trace: [ 42.315774] vmballoon_pop+0x102/0x130 [vmw_balloon] [ 42.315816] vmballoon_exit+0x42/0xd64 [vmw_balloon] [ 42.315853] SyS_delete_module+0x1e2/0x250 [ 42.315891] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 42.315924] RIP: 0033:0x7f3af5b0e8e7 [ 42.315949] RSP: 002b:00007fffe6ce0148 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 42.315996] RAX: ffffffffffffffda RBX: 000055be676401e0 RCX: 00007f3af5b0e8e7 [ 42.316951] RDX: 000000000000000a RSI: 0000000000000800 RDI: 000055be67640248 [ 42.317887] RBP: 0000000000000003 R08: 0000000000000000 R09: 1999999999999999 [ 42.318845] R10: 0000000000000883 R11: 0000000000000206 R12: 00007fffe6cdf130 [ 42.319755] R13: 0000000000000000 R14: 0000000000000000 R15: 000055be676401e0 [ 42.320606] Code: c0 74 1c f0 ff 4f 1c 74 02 5d c3 85 f6 74 07 e8 0f d8 ff ff 5d c3 31 f6 e8 c6 fb ff ff 5d c3 48 c7 c6 c8 0f c5 ba e8 58 be 02 00 <0f> 0b 66 0f 1f 44 00 00 66 66 66 66 90 48 85 ff 75 01 c3 55 48 [ 42.323462] RIP: __free_pages+0x38/0x40 RSP: ffffbfefc163be98 [ 42.325735] ---[ end trace 872e008e33f81508 ]--- To solve the bug, we eliminate the dual purpose of balloon.page. Fixes: f220a80f ("VMware balloon: add batching to the vmw_balloon.") Cc: stable@vger.kernel.org Reported-by:
Oleksandr Natalenko <onatalen@redhat.com> Signed-off-by:
Gil Kupfer <gilkup@gmail.com> Signed-off-by:
Nadav Amit <namit@vmware.com> Reviewed-by:
Xavier Deguillard <xdeguillard@vmware.com> Tested-by:
Oleksandr Natalenko <oleksandr@redhat.com> Signed-off-by:
-
