- 06 Sep, 2019 39 commits
-
-
Andrew Morton authored
commit 441e254c upstream. Fixes: 701d6785 ("mm/zsmalloc.c: fix race condition in zs_destroy_pool") Link: http://lkml.kernel.org/r/201908251039.5oSbEEUT%25lkp@intel.comReported-by:
kbuild test robot <lkp@intel.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Henry Burns <henrywolfeburns@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Jonathan Adams <jwadams@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hangbin Liu authored
[ Upstream commit e2c69393 ] In __icmp_send() there is a possibility that the rt->dst.dev is NULL, e,g, with tunnel collect_md mode, which will cause kernel crash. Here is what the code path looks like, for GRE: - ip6gre_tunnel_xmit - ip6gre_xmit_ipv4 - __gre6_xmit - ip6_tnl_xmit - if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE - icmp_send - net = dev_net(rt->dst.dev); <-- here The reason is __metadata_dst_init() init dst->dev to NULL by default. We could not fix it in __metadata_dst_init() as there is no dev supplied. On the other hand, the reason we need rt->dst.dev is to get the net. So we can just try get it from skb->dev when rt->dst.dev is NULL. v4: Julian Anastasov remind skb->dev also could be NULL. We'd better still use dst.dev and do a check to avoid crash. v3: No changes. v2: fix the issue in __icmp_send() instead of updating shared dst dev in {ip_md, ip6}_tunnel_xmit. Fixes: c8b34e68 ("ip_tunnel: Add tnl_update_pmtu in ip_md_tunnel_xmit") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit ef8d8ccd ] As Jason Baron explained in commit 790ba456 ("tcp: set SOCK_NOSPACE under memory pressure"), it is crucial we properly set SOCK_NOSPACE when needed. However, Jason patch had a bug, because the 'nonblocking' status as far as sk_stream_wait_memory() is concerned is governed by MSG_DONTWAIT flag passed at sendmsg() time : long timeo = sock_sndtimeo(sk, flags & MSG_DONTWAIT); So it is very possible that tcp sendmsg() calls sk_stream_wait_memory(), and that sk_stream_wait_memory() returns -EAGAIN with SOCK_NOSPACE cleared, if sk->sk_sndtimeo has been set to a small (but not zero) value. This patch removes the 'noblock' variable since we must always set SOCK_NOSPACE if -EAGAIN is returned. It also renames the do_nonblock label since we might reach this code path even if we were in blocking mode. Fixes: 790ba456 ("tcp: set SOCK_NOSPACE under memory pressure") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Jason Baron <jbaron@akamai.com> Reported-by:
Vladimir Rutsky <rutsky@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Jason Baron <jbaron@akamai.com> Signed-off-by:
-
Jason Baron authored
[ Upstream commit 4651d180 ] Currently, we are only explicitly setting SOCK_NOSPACE on a write timeout for non-blocking sockets. Epoll() edge-trigger mode relies on SOCK_NOSPACE being set when -EAGAIN is returned to ensure that EPOLLOUT is raised. Expand the setting of SOCK_NOSPACE to non-blocking sockets as well that can use SO_SNDTIMEO to adjust their write timeout. This mirrors the behavior that Eric Dumazet introduced for tcp sockets. Signed-off-by:
-
David Ahern authored
[ Upstream commit c7036d97 ] A user reported that routes are getting installed with type 0 (RTN_UNSPEC) where before the routes were RTN_UNICAST. One example is from accel-ppp which apparently still uses the ioctl interface and does not set rtmsg_type. Another is the netlink interface where ipv6 does not require rtm_type to be set (v4 does). Prior to the commit in the Fixes tag the ipv6 stack converted type 0 to RTN_UNICAST, so restore that behavior. Fixes: e8478e80 ("net/ipv6: Save route type in rt6_info") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit f17f7648 ] In commit 93a714d6 ("multicast: Extend ip address command to enable multicast group join/leave on") we added a new flag IFA_F_MCAUTOJOIN to make user able to add multicast address on ethernet interface. This works for IPv4, but not for IPv6. See the inet6_addr_add code. static int inet6_addr_add() { ... if (cfg->ifa_flags & IFA_F_MCAUTOJOIN) { ipv6_mc_config(net->ipv6.mc_autojoin_sk, true...) } ifp = ipv6_add_addr(idev, cfg, true, extack); <- always fail with maddr if (!IS_ERR(ifp)) { ... } else if (cfg->ifa_flags & IFA_F_MCAUTOJOIN) { ipv6_mc_config(net->ipv6.mc_autojoin_sk, false...) } } But in ipv6_add_addr() it will check the address type and reject multicast address directly. So this feature is never worked for IPv6. We should not remove the multicast address check totally in ipv6_add_addr(), but could accept multicast address only when IFA_F_MCAUTOJOIN flag supplied. v2: update commit description Fixes: 93a714d6 ("multicast: Extend ip address command to enable multicast group join/leave on") Reported-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
-
John Fastabend authored
[ Upstream commit d85f0177 ] The ctx->sk_write_space pointer is only set when TLS tx mode is enabled. When running without TX mode its a null pointer but we still set the sk sk_write_space pointer on close(). Fix the close path to only overwrite sk->sk_write_space when the current pointer is to the tls_write_space function indicating the tls module should clean it up properly as well. Reported-by:
Hillf Danton <hdanton@sina.com> Cc: Ying Xue <ying.xue@windriver.com> Cc: Andrey Konovalov <andreyknvl@google.com> Fixes: 57c722e9 ("net/tls: swap sk_write_space on close") Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 57c722e9 ] Now that we swap the original proto and clear the ULP pointer on close we have to make sure no callback will try to access the freed state. sk_write_space is not part of sk_prot, remember to swap it. Reported-by: syzbot+dcdc9deefaec44785f32@syzkaller.appspotmail.com Fixes: 95fa1454 ("bpf: sockmap/tls, close can race with map free") Signed-off-by:
-
Vakul Garg authored
[ Upstream commit 15008579 ] In tls_sw_sendmsg() and tls_sw_sendpage(), the variable 'ret' has been set to return value of tls_complete_pending_work(). This allows return of proper error code if tls_complete_pending_work() fails. Fixes: 3c4d7559 ("tls: kernel TLS support") Signed-off-by:
Vakul Garg <vakul.garg@nxp.com> Signed-off-by:
-
Jyri Sarha authored
[ Upstream commit 432973fd ] Register cpufreq notifier after we have initialized the crtc and unregister it before we remove the ctrc. Receiving a cpufreq notify without crtc causes a crash. Reported-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Jyri Sarha <jsarha@ti.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pedro Sousa authored
[ Upstream commit ebcb8f85 ] Fix RX_TERMINATION_FORCE_ENABLE define value from 0x0089 to 0x00A9 according to MIPI Alliance MPHY specification. Fixes: e785060e ("ufs: definitions for phy interface") Signed-off-by:
Pedro Sousa <sousa@synopsys.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit c08f99c3 ] We don't free the edid blob allocated by the call to drm_get_edid(), causing a memleak. Fix this by calling kfree(edid) at the end of the get_modes(). Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190610135739.6077-1-tomi.valkeinen@ti.comSigned-off-by:
-
Stefan Wahren authored
[ Upstream commit 215e06f0 ] The commit 5e6acc3e ("bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.") broke module autoloading on Raspberry Pi. So add a module alias this fix this. Signed-off-by:
Stefan Wahren <wahrenst@gmx.net> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by:
-
Lionel Landwerlin authored
[ Upstream commit 63ac3328 ] subslice_mask is an array indexed by slice, not subslice. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 8cc76693 ("drm/i915: store all subslice masks") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108712Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181112123931.2815-1-lionel.g.landwerlin@intel.comSigned-off-by:
-
Adrian Vladu authored
[ Upstream commit b0995156 ] HyperV KVP and VSS daemons should exit with 0 when the '--help' or '-h' flags are used. Signed-off-by:
Adrian Vladu <avladu@cloudbasesolutions.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sasha Levin <sashal@kernel.org> Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com> Signed-off-by:
-
Adrian Vladu authored
[ Upstream commit 5912e791 ] Fixed pep8/flake8 python style code for lsvmbus tool. The TAB indentation was on purpose ignored (pep8 rule W191) to make sure the code is complying with the Linux code guideline. The following command doe not show any warnings now: pep8 --ignore=W191 lsvmbus flake8 --ignore=W191 lsvmbus Signed-off-by:
-
Hans Ulli Kroll authored
[ Upstream commit 77775888 ] On the Gemini SoC the FOTG2 stalls after port reset so restart the HCD after each port reset. Signed-off-by:
Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190810150458.817-1-linus.walleij@linaro.orgSigned-off-by:
-
Y.C. Chen authored
[ Upstream commit 05b43971 ] There is another thread still access standard VGA I/O while loading drm driver. Disable standard VGA I/O decode to avoid this issue. Signed-off-by:
Y.C. Chen <yc_chen@aspeedtech.com> Reviewed-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1523410059-18415-1-git-send-email-yc_chen@aspeedtech.comSigned-off-by:
-
Wolfram Sang authored
[ Upstream commit d7437fc0 ] After we disabled interrupts, there might still be an active one running. Sync before clearing the pointer to the slave device. Fixes: c31d0a00 ("i2c: emev2: add slave support") Reported-by:
Krzysztof Adamski <krzysztof.adamski@nokia.com> Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Wolfram Sang authored
[ Upstream commit 7b814d85 ] After we disabled interrupts, there might still be an active one running. Sync before clearing the pointer to the slave device. Fixes: de20d185 ("i2c: rcar: add slave support") Reported-by:
-
Will Deacon authored
[ Upstream commit 5717fe5a ] If a CPU doesn't support the page size for which the kernel is configured, then we will complain and refuse to bring it online. For secondary CPUs (and the boot CPU on a system booting with EFI), we will also print an error identifying the mismatch. Consequently, the only time that the cpufeature code can detect a granule size mismatch is for a granule other than the one that is currently being used. Although we would rather such systems didn't exist, we've unfortunately lost that battle and Kevin reports that on his amlogic S922X (odroid-n2 board) we end up warning and taining with defconfig because 16k pages are not supported by all of the CPUs. In such a situation, we don't actually care about the feature mismatch, particularly now that KVM only exposes the sanitised view of the CPU registers (commit 93390c0a - "arm64: KVM: Hide unsupported AArch64 CPU features from guests"). Treat the granule fields as non-strict and let Kevin run without a tainted kernel. Cc: Marc Zyngier <maz@kernel.org> Reported-by:
Kevin Hilman <khilman@baylibre.com> Tested-by:
Mark Rutland <mark.rutland@arm.com> Acked-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Will Deacon <will@kernel.org> [catalin.marinas@arm.com: changelog updated with KVM sanitised regs commit] Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit ae78ca3c ] In read_per_ring_refs(), after 'req' and related memory regions are allocated, xen_blkif_map() is invoked to map the shared frame, irq, and etc. However, if this mapping process fails, no cleanup is performed, leading to memory leaks. To fix this issue, invoke the cleanup before returning the error. Acked-by:
Roger Pau Monné <roger.pau@citrix.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Benjamin Herrenschmidt authored
[ Upstream commit 4a56a478 ] If fsg_disable() and fsg_set_alt() are called too closely to each other (for example due to a quick reset/reconnect), what can happen is that fsg_set_alt sets common->new_fsg from an interrupt while handle_exception is trying to process the config change caused by fsg_disable(): fsg_disable() ... handle_exception() sets state back to FSG_STATE_NORMAL hasn't yet called do_set_interface() or is inside it. ---> interrupt fsg_set_alt sets common->new_fsg queues a new FSG_STATE_CONFIG_CHANGE <--- Now, the first handle_exception can "see" the updated new_fsg, treats it as if it was a fsg_set_alt() response, call usb_composite_setup_continue() etc... But then, the thread sees the second FSG_STATE_CONFIG_CHANGE, and goes back down the same path, wipes and reattaches a now active fsg, and .. calls usb_composite_setup_continue() which at this point is wrong. Not only we get a backtrace, but I suspect the second set_interface wrecks some state causing the host to get upset in my case. This fixes it by replacing "new_fsg" by a "state argument" (same principle) which is set in the same lock section as the state update, and retrieved similarly. That way, there is never any discrepancy between the dequeued state and the observed value of it. We keep the ability to have the latest reconfig operation take precedence, but we guarantee that once "dequeued" the argument (new_fsg) will not be clobbered by any new event. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
[ Upstream commit 602fda17 ] In some cases, one can get out of suspend with a reset or a disconnect followed by a reconnect. Previously we would leave a stale suspended flag set. Signed-off-by:
-
Robin Murphy authored
[ Upstream commit ab2cbeb0 ] Since scatterlist dimensions are all unsigned ints, in the relatively rare cases where a device's max_segment_size is set to UINT_MAX, then the "cur_len + s_length <= max_len" check in __finalise_sg() will always return true. As a result, the corner case of such a device mapping an excessively large scatterlist which is mergeable to or beyond a total length of 4GB can lead to overflow and a bogus truncated dma_length in the resulting segment. As we already assume that any single segment must be no longer than max_len to begin with, this can easily be addressed by reshuffling the comparison. Fixes: 809eac54 ("iommu/dma: Implement scatterlist segment merging") Reported-by:
Nicolin Chen <nicoleotsuka@gmail.com> Tested-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Hans Verkuil authored
[ Upstream commit d555c343 ] The OMAP 4 TRM specifies that when using double-index addressing the address increases by the ES plus the EI value minus 1 within a frame. When a full frame is transferred, the address increases by the ES plus the frame index (FI) value minus 1. The omap-dma code didn't account for the 'minus 1' in the FI register. To get correct addressing, add 1 to the src_icg value. This was found when testing a hacked version of the media m2m-deinterlace.c driver on a Pandaboard. The only other source that uses this feature is omap_vout_vrfb.c, and that adds a + 1 when setting the dst_icg. This is a workaround for the broken omap-dma.c behavior. So remove the workaround at the same time that we fix omap-dma.c. I tested the omap_vout driver with a Beagle XM board to check that the '+ 1' in omap_vout_vrfb.c was indeed a workaround for the omap-dma bug. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Link: https://lore.kernel.org/r/952e7f51-f208-9333-6f58-b7ed20d2ea0b@xs4all.nlSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit 39c71a5b ] In stm32_mdma_irq_handler(), chan is checked on line 1368. When chan is NULL, it is still used on line 1369: dev_err(chan2dev(chan), "MDMA channel not initialized\n"); Thus, a possible null-pointer dereference may occur. To fix this bug, "dev_dbg(mdma2dev(dmadev), ...)" is used instead. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Fixes: a4ffb13c ("dmaengine: Add STM32 MDMA driver") Link: https://lore.kernel.org/r/20190729020849.17971-1-baijiaju1990@gmail.comSigned-off-by:
-
zhengbin authored
[ Upstream commit b33d5675 ] In panel_attach, if misc_register fails, we need to delete scan_timer, which was setup in keypad_init->init_scan_timer. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Signed-off-by:
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by:
-
Pierre-Louis Bossart authored
[ Upstream commit 664b1658 ] Two off-by-one errors: INTSTAT0 missed BIT(31) and INTSTAT1 is only defined on first 16 bits. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190725234032.21152-15-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
[ Upstream commit b07dd9b4 ] wrong prefix and wrong macro. Signed-off-by:
-
Keith Busch authored
[ Upstream commit bd46a906 ] Ensure the controller is not in the NEW state when nvme_probe() exits. This will always allow a subsequent nvme_remove() to set the state to DELETING, fixing a potential race between the initial asynchronous probe and device removal. Reported-by:
Li Zhong <lizhongfs@gmail.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Keith Busch <kbusch@kernel.org> Signed-off-by:
-
Sagi Grimberg authored
[ Upstream commit b9156dae ] When the user issues a command with side effects, we will end up freezing the namespace request queue when updating disk info (and the same for the corresponding mpath disk node). However, we are not freezing the mpath node request queue, which means that mpath I/O can still come in and block on blk_queue_enter (called from nvme_ns_head_make_request -> direct_make_request). This is a deadlock, because blk_queue_enter will block until the inner namespace request queue is unfroze, but that process is blocked because the namespace revalidation is trying to update the mpath disk info and freeze its request queue (which will never complete because of the I/O that is blocked on blk_queue_enter). Fix this by freezing all the subsystem nsheads request queues before executing the passthru command. Given that these commands are infrequent we should not worry about this temporary I/O freeze to keep things sane. Here is the matching hang traces: -- [ 374.465002] INFO: task systemd-udevd:17994 blocked for more than 122 seconds. [ 374.472975] Not tainted 5.2.0-rc3-mpdebug+ #42 [ 374.478522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 374.487274] systemd-udevd D 0 17994 1 0x00000000 [ 374.493407] Call Trace: [ 374.496145] __schedule+0x2ef/0x620 [ 374.500047] schedule+0x38/0xa0 [ 374.503569] blk_queue_enter+0x139/0x220 [ 374.507959] ? remove_wait_queue+0x60/0x60 [ 374.512540] direct_make_request+0x60/0x130 [ 374.517219] nvme_ns_head_make_request+0x11d/0x420 [nvme_core] [ 374.523740] ? generic_make_request_checks+0x307/0x6f0 [ 374.529484] generic_make_request+0x10d/0x2e0 [ 374.534356] submit_bio+0x75/0x140 [ 374.538163] ? guard_bio_eod+0x32/0xe0 [ 374.542361] submit_bh_wbc+0x171/0x1b0 [ 374.546553] block_read_full_page+0x1ed/0x330 [ 374.551426] ? check_disk_change+0x70/0x70 [ 374.556008] ? scan_shadow_nodes+0x30/0x30 [ 374.560588] blkdev_readpage+0x18/0x20 [ 374.564783] do_read_cache_page+0x301/0x860 [ 374.569463] ? blkdev_writepages+0x10/0x10 [ 374.574037] ? prep_new_page+0x88/0x130 [ 374.578329] ? get_page_from_freelist+0xa2f/0x1280 [ 374.583688] ? __alloc_pages_nodemask+0x179/0x320 [ 374.588947] read_cache_page+0x12/0x20 [ 374.593142] read_dev_sector+0x2d/0xd0 [ 374.597337] read_lba+0x104/0x1f0 [ 374.601046] find_valid_gpt+0xfa/0x720 [ 374.605243] ? string_nocheck+0x58/0x70 [ 374.609534] ? find_valid_gpt+0x720/0x720 [ 374.614016] efi_partition+0x89/0x430 [ 374.618113] ? string+0x48/0x60 [ 374.621632] ? snprintf+0x49/0x70 [ 374.625339] ? find_valid_gpt+0x720/0x720 [ 374.629828] check_partition+0x116/0x210 [ 374.634214] rescan_partitions+0xb6/0x360 [ 374.638699] __blkdev_reread_part+0x64/0x70 [ 374.643377] blkdev_reread_part+0x23/0x40 [ 374.647860] blkdev_ioctl+0x48c/0x990 [ 374.651956] block_ioctl+0x41/0x50 [ 374.655766] do_vfs_ioctl+0xa7/0x600 [ 374.659766] ? locks_lock_inode_wait+0xb1/0x150 [ 374.664832] ksys_ioctl+0x67/0x90 [ 374.668539] __x64_sys_ioctl+0x1a/0x20 [ 374.672732] do_syscall_64+0x5a/0x1c0 [ 374.676828] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 374.738474] INFO: task nvmeadm:49141 blocked for more than 123 seconds. [ 374.745871] Not tainted 5.2.0-rc3-mpdebug+ #42 [ 374.751419] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 374.760170] nvmeadm D 0 49141 36333 0x00004080 [ 374.766301] Call Trace: [ 374.769038] __schedule+0x2ef/0x620 [ 374.772939] schedule+0x38/0xa0 [ 374.776452] blk_mq_freeze_queue_wait+0x59/0x100 [ 374.781614] ? remove_wait_queue+0x60/0x60 [ 374.786192] blk_mq_freeze_queue+0x1a/0x20 [ 374.790773] nvme_update_disk_info.isra.57+0x5f/0x350 [nvme_core] [ 374.797582] ? nvme_identify_ns.isra.50+0x71/0xc0 [nvme_core] [ 374.804006] __nvme_revalidate_disk+0xe5/0x110 [nvme_core] [ 374.810139] nvme_revalidate_disk+0xa6/0x120 [nvme_core] [ 374.816078] ? nvme_submit_user_cmd+0x11e/0x320 [nvme_core] [ 374.822299] nvme_user_cmd+0x264/0x370 [nvme_core] [ 374.827661] nvme_dev_ioctl+0x112/0x1d0 [nvme_core] [ 374.833114] do_vfs_ioctl+0xa7/0x600 [ 374.837117] ? __audit_syscall_entry+0xdd/0x130 [ 374.842184] ksys_ioctl+0x67/0x90 [ 374.845891] __x64_sys_ioctl+0x1a/0x20 [ 374.850082] do_syscall_64+0x5a/0x1c0 [ 374.854178] entry_SYSCALL_64_after_hwframe+0x44/0xa9 -- Reported-by:
James Puthukattukaran <james.puthukattukaran@oracle.com> Tested-by:
-
Logan Gunthorpe authored
[ Upstream commit 86b9a63e ] After calling nvme_loop_delete_ctrl(), the controllers will not yet be deleted because nvme_delete_ctrl() only schedules work to do the delete. This means a race can occur if a port is removed but there are still active controllers trying to access that memory. To fix this, flush the nvme_delete_wq before returning from nvme_loop_remove_port() so that any controllers that might be in the process of being deleted won't access a freed port. Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by : Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 5dc84855 ] In the in-kernel afs filesystem, d_fsdata is set with the data version of the parent directory. afs_d_revalidate() will update this to the current directory version, but it shouldn't do this if it the value it read from d_fsdata is the same as no lock is held and cmpxchg() is not used. Fix the code to only change the value if it is different from the current directory version. Fixes: 260a9803 ("[AFS]: Add "directory write" support.") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit a6eed4ab ] In afs_read_dir(), there is an if statement on line 255 to check whether req->pages is NULL: if (!req->pages) goto error; If req->pages is NULL, afs_put_read() on line 337 is executed. In afs_put_read(), req->pages[i] is used on line 195. Thus, a possible null-pointer dereference may occur in this case. To fix this possible bug, an if statement is added in afs_put_read() to check req->pages. This bug is found by a static analysis tool STCheck written by us. Fixes: f3ddee8d ("afs: Fix directory handling") Signed-off-by:
-
Marc Dionne authored
[ Upstream commit 4a46fdba ] afs_deliver_vl_get_entry_by_name_u() scans through the vl entry received from the volume location server and builds a return list containing the sites that are currently valid. When assigning values for the return list, the index into the vl entry (i) is used rather than the one for the new list (entry->nr_server). If all sites are usable, this works out fine as the indices will match. If some sites are not valid, for example if AFS_VLSF_DONTUSE is set, fs_mask and the uuid will be set for the wrong return site. Fix this by using entry->nr_server as the index into the arrays being filled in rather than i. This can lead to EDESTADDRREQ errors if none of the returned sites have a valid fs_mask. Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
Jeffrey Altman <jaltman@auristor.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 2067b2b3 ] Fix the service handler function for the CB.ProbeUuid RPC call so that it replies in the correct manner - that is an empty reply for success and an abort of 1 for failure. Putting 0 or 1 in an integer in the body of the reply should result in the fileserver throwing an RX_PROTOCOL_ERROR abort and discarding its record of the client; older servers, however, don't necessarily check that all the data got consumed, and so might incorrectly think that they got a positive response and associate the client with the wrong host record. If the client is incorrectly associated, this will result in callbacks intended for a different client being delivered to this one and then, when the other client connects and responds positively, all of the callback promises meant for the client that issued the improper response will be lost and it won't receive any further change notifications. Fixes: 9396d496 ("afs: support the CB.ProbeUuid RPC op") Signed-off-by:
-
Anthony Iliopoulos authored
[ Upstream commit fab7772b ] When CONFIG_NVME_MULTIPATH is set, only the hidden gendisk associated with the per-controller ns is run through revalidate_disk when a rescan is triggered, while the visible blockdev never gets its size (bdev->bd_inode->i_size) updated to reflect any capacity changes that may have occurred. This prevents online resizing of nvme block devices and in extension of any filesystems atop that will are unable to expand while mounted, as userspace relies on the blockdev size for obtaining the disk capacity (via BLKGETSIZE/64 ioctls). Fix this by explicitly revalidating the actual namespace gendisk in addition to the per-controller gendisk, when multipath is enabled. Signed-off-by:
Anthony Iliopoulos <ailiopoulos@suse.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 5d6fb560 ] clang-9 points out that there are two variables that depending on the configuration may only be used in an ARRAY_SIZE() expression but not referenced: drivers/dma/ste_dma40.c:145:12: error: variable 'd40_backup_regs' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration] static u32 d40_backup_regs[] = { ^ drivers/dma/ste_dma40.c:214:12: error: variable 'd40_backup_regs_chan' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration] static u32 d40_backup_regs_chan[] = { Mark these __maybe_unused to shut up the warning. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
-
- 29 Aug, 2019 1 commit
-
-
Greg Kroah-Hartman authored
-
