- 08 Jun, 2020 5 commits
-
-
Paolo Abeni authored
The cipso and calipso code can set the MLS_CAT attribute on successful parsing, even if the corresponding catmap has not been allocated, as per current configuration and external input. Later, selinux code tries to access the catmap if the MLS_CAT flag is present via netlbl_catmap_getlong(). That may cause null ptr dereference while processing incoming network traffic. Address the issue setting the MLS_CAT flag only if the catmap is really allocated. Additionally let netlbl_catmap_getlong() cope with NULL catmap. Reported-by:
Matthew Sheets <matthew.sheets@gd-ms.com> Fixes: 4b8feff2 ("netlabel: fix the horribly broken catmap functions") Fixes: ceba1832 ("calipso: Set the calipso socket label to match the secattr.") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
David S. Miller <davem@davemloft.net> (backported from commit eead1c2e) [cascardo: calipso code is not present] CVE-2020-10711 Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by:
Stefan Bader <stefan.bader@canonical.com> Acked-by:
Andrea Righi <andrea.righi@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Kyungtae Kim authored
FuzzUSB (a variant of syzkaller) found an illegal array access using an incorrect index while binding a gadget with UDC. Reference: https://www.spinics.net/lists/linux-usb/msg194331.html This bug occurs when a size variable used for a buffer is misused to access its strcpy-ed buffer. Given a buffer along with its size variable (taken from user input), from which, a new buffer is created using kstrdup(). Due to the original buffer containing 0 value in the middle, the size of the kstrdup-ed buffer becomes smaller than that of the original. So accessing the kstrdup-ed buffer with the same size variable triggers memory access violation. The fix makes sure no zero value in the buffer, by comparing the strlen() of the orignal buffer with the size variable, so that the access to the kstrdup-ed buffer is safe. BUG: KASAN: slab-out-of-bounds in gadget_dev_desc_UDC_store+0x1ba/0x200 drivers/usb/gadget/configfs.c:266 Read of size 1 at addr ffff88806a55dd7e by task syz-executor.0/17208 CPU: 2 PID: 17208 Comm: syz-executor.0 Not tainted 5.6.8 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xce/0x128 lib/dump_stack.c:118 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374 __kasan_report+0x131/0x1b0 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:641 __asan_report_load1_noabort+0x14/0x20 mm/kasan/generic_report.c:132 gadget_dev_desc_UDC_store+0x1ba/0x200 drivers/usb/gadget/configfs.c:266 flush_write_buffer fs/configfs/file.c:251 [inline] configfs_write_file+0x2f1/0x4c0 fs/configfs/file.c:283 __vfs_write+0x85/0x110 fs/read_write.c:494 vfs_write+0x1cd/0x510 fs/read_write.c:558 ksys_write+0x18a/0x220 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:620 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by:
Kyungtae Kim <kt0755@gmail.com> Reported-and-tested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 15753588) CVE-2020-13143 Signed-off-by:
Kleber Souza <kleber.souza@canonical.com> Signed-off-by:
-
Jan Kara authored
BugLink: https://bugs.launchpad.net/bugs/1880213 Fix a debug-only build error in ext2/xattr.c: When building without extra debugging, (and with another patch that uses no_printk() instead of <empty> for the ext2-xattr debug-print macros, this build error happens: ../fs/ext2/xattr.c: In function ‘ext2_xattr_cache_insert’: ../fs/ext2/xattr.c:869:18: error: ‘ext2_xattr_cache’ undeclared (first use in this function); did you mean ‘ext2_xattr_list’? atomic_read(&ext2_xattr_cache->c_entry_count)); Fix the problem by removing cached entry count from the debug message since otherwise we'd have to export the mbcache structure just for that. Fixes: be0726d3 ("ext2: convert to mbcache2") Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Jan Kara <jack@suse.cz> (cherry picked from commit 32302085) Signed-off-by:
Ian May <ian.may@canonical.com> Acked-by:
Kamal Mostafa <kamal@canonical.com> Signed-off-by:
-
Daniel Borkmann authored
BugLink: https://bugs.launchpad.net/bugs/1879752 After commit 636c2628 ("net: skbuff: Remove errornous length validation in skb_vlan_pop()") mentioned test case stopped working, throwing a -12 (ENOMEM) return code. The issue however is not due to 636c2628, but rather due to a buggy test case that got uncovered from the change in behaviour in 636c2628. The data_size of that test case for the skb was set to 1. In the bpf_fill_ld_abs_vlan_push_pop() handler bpf insns are generated that loop with: reading skb data, pushing 68 tags, reading skb data, popping 68 tags, reading skb data, etc, in order to force a skb expansion and thus trigger that JITs recache skb->data. Problem is that initial data_size is too small. While before 636c2628, the test silently bailed out due to the skb->len < VLAN_ETH_HLEN check with returning 0, and now throwing an error from failing skb_ensure_writable(). Set at least minimum of ETH_HLEN as an initial length so that on first push of data, equivalent pop will succeed. Fixes: 4d9c5c53 ("test_bpf: add bpf_skb_vlan_push/pop() tests") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by:
-
Marcelo Henrique Cerri authored
Ignore: yes Signed-off-by:Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
-
- 03 Jun, 2020 7 commits
-
-
Kleber Sacilotto de Souza authored
Signed-off-by: -
Josh Poimboeuf authored
Make the docs match the code. Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> CVE-2020-0543 Signed-off-by:
-
Mark Gross authored
Add documentation for the SRBDS vulnerability and its mitigation. [ bp: Massage. jpoimboe: sysfs table strings. ] Signed-off-by:
Mark Gross <mgross@linux.intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Tony Luck <tony.luck@intel.com> Reviewed-by:
-
Mark Gross authored
SRBDS is an MDS-like speculative side channel that can leak bits from the random number generator (RNG) across cores and threads. New microcode serializes the processor access during the execution of RDRAND and RDSEED. This ensures that the shared buffer is overwritten before it is released for reuse. While it is present on all affected CPU models, the microcode mitigation is not needed on models that enumerate ARCH_CAPABILITIES[MDS_NO] in the cases where TSX is not supported or has been disabled with TSX_CTRL. The mitigation is activated by default on affected processors and it increases latency for RDRAND and RDSEED instructions. Among other effects this will reduce throughput from /dev/urandom. * Enable administrator to configure the mitigation off when desired using either mitigations=off or srbds=off. * Export vulnerability status via sysfs * Rename file-scoped macros to apply for non-whitelist table initializations. [ bp: Massage, - s/VULNBL_INTEL_STEPPING/VULNBL_INTEL_STEPPINGS/g, - do not read arch cap MSR a second time in tsx_fused_off() - just pass it in, - flip check in cpu_set_bug_bits() to save an indentation level, - reflow comments. jpoimboe: s/Mitigated/Mitigation/ in user-visible strings tglx: Dropped the fused off magic for now ] Signed-off-by:
Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Reviewed-by:
Neelima Krishnan <neelima.krishnan@intel.com> CVE-2020-0543 Signed-off-by:
-
Mark Gross authored
To make cpu_matches() reusable for other matching tables, have it take a pointer to a x86_cpu_id table as an argument. [ bp: Flip arguments order. ] Signed-off-by:
-
Mark Gross authored
Intel uses the same family/model for several CPUs. Sometimes the stepping must be checked to tell them apart. On x86 there can be at most 16 steppings. Add a steppings bitmask to x86_cpu_id and a X86_MATCH_VENDOR_FAMILY_MODEL_STEPPING_FEATURE macro and support for matching against family/model/stepping. [ bp: Massage. tglx: Lightweight variant for backporting ] Signed-off-by:
-
Kleber Sacilotto de Souza authored
Ignore: yes Signed-off-by:
-
- 29 May, 2020 4 commits
-
-
Khalid Elmously authored
Signed-off-by: -
Khalid Elmously authored
BugLink: https://bugs.launchpad.net/bugs/1881170 Properties: no-test-build Signed-off-by:
-
Khalid Elmously authored
Ignore: yes Signed-off-by: -
wuxu.wu authored
dw_spi_irq() and dw_spi_transfer_one concurrent calls. I find a panic in dw_writer(): txw = *(u8 *)(dws->tx), when dw->tx==null, dw->len==4, and dw->tx_end==1. When tpm driver's message overtime dw_spi_irq() and dw_spi_transfer_one may concurrent visit dw_spi, so I think dw_spi structure lack of protection. Otherwise dw_spi_transfer_one set dw rx/tx buffer and then open irq, store dw rx/tx instructions and other cores handle irq load dw rx/tx instructions may out of order. [ 1025.321302] Call trace: ... [ 1025.321319] __crash_kexec+0x98/0x148 [ 1025.321323] panic+0x17c/0x314 [ 1025.321329] die+0x29c/0x2e8 [ 1025.321334] die_kernel_fault+0x68/0x78 [ 1025.321337] __do_kernel_fault+0x90/0xb0 [ 1025.321346] do_page_fault+0x88/0x500 [ 1025.321347] do_translation_fault+0xa8/0xb8 [ 1025.321349] do_mem_abort+0x68/0x118 [ 1025.321351] el1_da+0x20/0x8c [ 1025.321362] dw_writer+0xc8/0xd0 [ 1025.321364] interrupt_transfer+0x60/0x110 [ 1025.321365] dw_spi_irq+0x48/0x70 ... Signed-off-by:
wuxu.wu <wuxu.wu@huawei.com> Link: https://lore.kernel.org/r/1577849981-31489-1-git-send-email-wuxu.wu@huawei.comSigned-off-by:
Mark Brown <broonie@kernel.org> CVE-2020-12769 (cherry picked from commit 19b61392) [ ben_r: 1 line adjustment to patch ] Signed-off-by:
Benjamin M Romer <benjamin.romer@canonical.com> Acked-by:
-
- 28 May, 2020 1 commit
-
-
Wen-chien Jesse Sung authored
BugLink: https://launchpad.net/bugs/1881124 I2C bus on Dell Edge Gateway stops working after commit Revert "ACPI / LPSS: allow to use specific PM domain during ->probe()" with error messages like: [ 13.812210] i2c_designware 80860F41:01: Unknown Synopsys component type: 0x00000000 [ 13.855837] i2c_designware 80860F41:01: timeout in enabling adapter [ 14.856276] i2c_designware 80860F41:01: controller timed out [ 14.856288] i2c_designware 80860F41:01: Unknown Synopsys component type: 0x00000000 Revert the commit for now until we figure out what is really causing the problem. Signed-off-by:
Wen-chien Jesse Sung <jesse.sung@canonical.com> Acked-by:
-
- 15 May, 2020 3 commits
-
-
Kleber Sacilotto de Souza authored
Signed-off-by: -
Kleber Sacilotto de Souza authored
BugLink: https://bugs.launchpad.net/bugs/1878873 Properties: no-test-build Signed-off-by:
-
Kleber Sacilotto de Souza authored
Ignore: yes Signed-off-by:
-
- 14 May, 2020 20 commits
-
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1878232Signed-off-by:
-
Thomas Pedersen authored
BugLink: https://bugs.launchpad.net/bugs/1878232 commit 30b2f0be upstream. commit 08a5bdde ("mac80211: consider QoS Null frames for STA_NULLFUNC_ACKED") Fixed a bug where we failed to take into account a nullfunc frame can be either non-QoS or QoS. It turns out there is at least one more bug in ieee80211_sta_tx_notify(), introduced in commit 7b6ddeaf ("mac80211: use QoS NDP for AP probing"), where we forgot to check for the QoS variant and so assumed the QoS nullfunc frame never went out Fix this by adding a helper ieee80211_is_any_nullfunc() which consolidates the check for non-QoS and QoS nullfunc frames. Replace existing compound conditionals and add a couple more missing checks for QoS variant. Signed-off-by:
Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200114055940.18502-3-thomas@adapt-ip.comSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1878232 commit 977dfef4 upstream. The commit 3c6fd1f0 ("ALSA: hda: Add driver blacklist") added a new blacklist for the devices that are known to have empty codecs, and one of the entries was ASUS ROG Zenith II (PCI SSID 1043:874f). However, it turned out that the very same PCI SSID is used for the previous model that does have the valid HD-audio codecs and the change broke the sound on it. Since the empty codec problem appear on the certain AMD platform (PCI ID 1022:1487), this patch changes the blacklist matching to both PCI ID and SSID using pci_match_id(). Also, the entry that was removed by the previous fix for ASUS ROG Zenigh II is re-added. Link: https://lore.kernel.org/r/20200424061222.19792-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jere Leppänen authored
BugLink: https://bugs.launchpad.net/bugs/1878232 commit 12dfd78e upstream. When starting shutdown in sctp_sf_do_dupcook_a(), get the value for SHUTDOWN Cumulative TSN Ack from the new association, which is reconstructed from the cookie, instead of the old association, which the peer doesn't have anymore. Otherwise the SHUTDOWN is either ignored or replied to with an ABORT by the peer because CTSN Ack doesn't match the peer's Initial TSN. Fixes: bdf6fa52 ("sctp: handle association restarts when the socket is closed.") Signed-off-by:
Jere Leppänen <jere.leppanen@nokia.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Herbert Xu authored
BugLink: https://bugs.launchpad.net/bugs/1878232 commit 260916df upstream. When we postpone a broadcast packet we save the source port in the skb if it is local. However, the source port can disappear before we get a chance to process the packet. This patch fixes this by holding a ref count on the netdev. It also delays the skb->cb modification until after we allocate the new skb as you should not modify shared skbs. Fixes: 412ca155 ("macvlan: Move broadcasts into a work queue") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Florian Fainelli authored
BugLink: https://bugs.launchpad.net/bugs/1878232 commit c823abac upstream. When we unload the ep93xx_eth, whether we have opened the network interface or not, we will either hit a kernel paging request error, or a simple NULL pointer de-reference because: - if ep93xx_open has been called, we have created a valid DMA mapping for ep->descs, when we call ep93xx_stop, we also call ep93xx_free_buffers, ep->descs now has a stale value - if ep93xx_open has not been called, we have a NULL pointer for ep->descs, so performing any operation against that address just won't work Fix this by adding a NULL pointer check for ep->descs which means that ep93xx_free_buffers() was able to successfully tear down the descriptors and free the DMA cookie as well. Fixes: 1d22e05d ("[PATCH] Cirrus Logic ep93xx ethernet driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Shmulik Ladkani authored
BugLink: https://bugs.launchpad.net/bugs/1878232 commit 636c2628 upstream. In 93515d53 "net: move vlan pop/push functions into common code" skb_vlan_pop was moved from its private location in openvswitch to skbuff common code. In case skb has non hw-accel vlan tag, the original 'pop_vlan()' assured that skb->len is sufficient (if skb->len < VLAN_ETH_HLEN then pop was considered a no-op). This validation was moved as is into the new common 'skb_vlan_pop'. Alas, in its original location (openvswitch), there was a guarantee that 'data' points to the mac_header, therefore the 'skb->len < VLAN_ETH_HLEN' condition made sense. However there's no such guarantee in the generic 'skb_vlan_pop'. For short packets received in rx path going through 'skb_vlan_pop', this causes 'skb_vlan_pop' to fail pop-ing a valid vlan hdr (in the non hw-accel case) or to fail moving next tag into hw-accel tag. Remove the 'skb->len < VLAN_ETH_HLEN' condition entirely: It is superfluous since inner '__skb_vlan_pop' already verifies there are VLAN_ETH_HLEN writable bytes at the mac_header. Note this presents a slight change to skb_vlan_pop() users: In case total length is smaller than VLAN_ETH_HLEN, skb_vlan_pop() now returns an error, as opposed to previous "no-op" behavior. Existing callers (e.g. tc act vlan, ovs) usually drop the packet if 'skb_vlan_pop' fails. Fixes: 93515d53 ("net: move vlan pop/push functions into common code") Signed-off-by:
Shmulik Ladkani <shmulik.ladkani@gmail.com> Cc: Pravin Shelar <pshelar@ovn.org> Reviewed-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Ivan Vecera authored
BugLink: https://bugs.launchpad.net/bugs/1878232 commit 2835d2d9 upstream. Commit ba5ca784 "bna: check for dma mapping errors" added besides other things a statistic that counts number of DMA buffer mapping failures per each Rx queue. This counter is not included in ethtool stats output. Fixes: ba5ca784 "bna: check for dma mapping errors" Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Toshiaki Makita authored
BugLink: https://bugs.launchpad.net/bugs/1878232 commit 7bb90c37 upstream. Adding fdb entries pointing to the bridge device uses fdb_insert(), which lacks various checks and does not respect added_by_user flag. As a result, some inconsistent behavior can happen: * Adding temporary entries succeeds but results in permanent entries. * Same goes for "dynamic" and "use". * Changing mac address of the bridge device causes deletion of user-added entries. * Replacing existing entries looks successful from userspace but actually not, regardless of NLM_F_EXCL flag. Use the same logic as other entries and fix them. Fixes: 3741873b ("bridge: allow adding of fdb entries pointing to the bridge device") Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Arend Van Spriel authored
BugLink: https://bugs.launchpad.net/bugs/1878232 commit 82bc9ab6 upstream. When the host-interface bus has hard time handling transmit packets it informs higher layer about this and it would stop the netdev queue when needed. However, since commit 9cd18359 ("brcmfmac: Make FWS queueing configurable.") this was broken. With this patch the behaviour is restored. Cc: stable@vger.kernel.org # v4.5, v4.6, v4.7 Fixes: 9cd18359 ("brcmfmac: Make FWS queueing configurable.") Tested-by:
Per Förlin <per.forlin@gmail.com> Reviewed-by:
Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Jaap Jan Meijer authored
BugLink: https://bugs.launchpad.net/bugs/1878232 commit 94abd778 upstream. If brcmf_cfg80211_get_station fails to determine the RSSI from the per-chain values get the value individually as a fallback. Fixes: 1f0dc59a ("brcmfmac: rework .get_station() callback") Signed-off-by:
Jaap Jan Meijer <jjmeijer88@gmail.com> Acked-by:
-
Laxman Dewangan authored
BugLink: https://bugs.launchpad.net/bugs/1878232 commit b22ef2a0 upstream. The pincontrol registers of Tegra chips has multiple filed per registers. There is two type of registers mux and drive. All configurations belongs to one of these registers. If any configurations are supported then <config>_bit is set to bit position of these registers otherwise -1 to not support it. The member is defined as s32 <config>_bit:6; So if config is not supported ifor given SoC then it is set to -1 in soc pinmmux table. In common driver code, to find out that given config is supported or not, it is checked as: s8 bit = <config>_bit; if (bit > 31) { /* Not supported config */ } But in this case, bit is s8 and hence for non supporting it is -1. Correct the check as: if (bit < 0) { /* Not supported config */ } Fixes: e4c02dce ("pinctrl: tegra: use signed bitfields for optional fields") Signed-off-by:
Laxman Dewangan <ldewangan@nvidia.com> Acked-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Mans Rullgard authored
BugLink: https://bugs.launchpad.net/bugs/1878232 commit 55e610cd upstream. This lock is already taken in ata_scsi_queuecmd() a few levels up the call stack so attempting to take it here is an error. Moreover, it is pointless in the first place since it only protects a single, atomic assignment. Enabling lock debugging gives the following output: ============================================= [ INFO: possible recursive locking detected ] 4.4.0-rc5+ #189 Not tainted --------------------------------------------- kworker/u2:3/37 is trying to acquire lock: (&(&host->lock)->rlock){-.-...}, at: [<90283294>] sata_dwc_exec_command_by_tag.constprop.14+0x44/0x8c but task is already holding lock: (&(&host->lock)->rlock){-.-...}, at: [<902761ac>] ata_scsi_queuecmd+0x2c/0x330 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&host->lock)->rlock); lock(&(&host->lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u2:3/37: #0: ("events_unbound"){.+.+.+}, at: [<9003a0a4>] process_one_work+0x12c/0x430 #1: ((&entry->work)){+.+.+.}, at: [<9003a0a4>] process_one_work+0x12c/0x430 #2: (&bdev->bd_mutex){+.+.+.}, at: [<9011fd54>] __blkdev_get+0x50/0x380 #3: (&(&host->lock)->rlock){-.-...}, at: [<902761ac>] ata_scsi_queuecmd+0x2c/0x330 stack backtrace: CPU: 0 PID: 37 Comm: kworker/u2:3 Not tainted 4.4.0-rc5+ #189 Workqueue: events_unbound async_run_entry_fn Stack : 90b38e30 00000021 00000003 9b2a6040 00000000 9005f3f0 904fc8dc 00000025 906b96e4 00000000 90528648 9b3336c4 904fc8dc 9009bf18 00000002 00000004 00000000 00000000 9b3336c4 9b3336e4 904fc8dc 9003d074 00000000 90500000 9005e738 00000000 00000000 00000000 00000000 00000000 00000000 00000000 6e657665 755f7374 756f626e 0000646e 00000000 00000000 9b00ca00 9b025000 ... Call Trace: [<90009d6c>] show_stack+0x88/0xa4 [<90057744>] __lock_acquire+0x1ce8/0x2154 [<900583e4>] lock_acquire+0x64/0x8c [<9045ff10>] _raw_spin_lock_irqsave+0x54/0x78 [<90283294>] sata_dwc_exec_command_by_tag.constprop.14+0x44/0x8c [<90283484>] sata_dwc_qc_issue+0x1a8/0x24c [<9026b39c>] ata_qc_issue+0x1f0/0x410 [<90273c6c>] ata_scsi_translate+0xb4/0x200 [<90276234>] ata_scsi_queuecmd+0xb4/0x330 [<9025800c>] scsi_dispatch_cmd+0xd0/0x128 [<90259934>] scsi_request_fn+0x58c/0x638 [<901a3e50>] __blk_run_queue+0x40/0x5c [<901a83d4>] blk_queue_bio+0x27c/0x28c [<901a5914>] generic_make_request+0xf0/0x188 [<901a5a54>] submit_bio+0xa8/0x194 [<9011adcc>] submit_bh_wbc.isra.23+0x15c/0x17c [<9011c908>] block_read_full_page+0x3e4/0x428 [<9009e2e0>] do_read_cache_page+0xac/0x210 [<9009fd90>] read_cache_page+0x18/0x24 [<901bbd18>] read_dev_sector+0x38/0xb0 [<901bd174>] msdos_partition+0xb4/0x5c0 [<901bcb8c>] check_partition+0x140/0x274 [<901bba60>] rescan_partitions+0xa0/0x2b0 [<9011ff68>] __blkdev_get+0x264/0x380 [<901201ac>] blkdev_get+0x128/0x36c [<901b9378>] add_disk+0x3c0/0x4bc [<90268268>] sd_probe_async+0x100/0x224 [<90043a44>] async_run_entry_fn+0x50/0x124 [<9003a11c>] process_one_work+0x1a4/0x430 [<9003a4f4>] worker_thread+0x14c/0x4fc [<900408f4>] kthread+0xd0/0xe8 [<90004338>] ret_from_kernel_thread+0x14/0x1c Fixes: 62936009 ("[libata] Add 460EX on-chip SATA driver, sata_dwc_460ex") Tested-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
Mans Rullgard <mans@mansr.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Neil Armstrong authored
BugLink: https://bugs.launchpad.net/bugs/1878232 commit 210990b0 upstream. When the DaVinci emac driver is removed and re-probed, the actual pdev->dev.platform_data is populated with an unwanted valid pointer saved by the previous davinci_emac_of_get_pdata() call, causing a kernel crash when calling priv->int_disable() in emac_int_disable(). Unable to handle kernel paging request at virtual address c8622a80 ... [<c0426fb4>] (emac_int_disable) from [<c0427700>] (emac_dev_open+0x290/0x5f8) [<c0427700>] (emac_dev_open) from [<c04c00ec>] (__dev_open+0xb8/0x120) [<c04c00ec>] (__dev_open) from [<c04c0370>] (__dev_change_flags+0x88/0x14c) [<c04c0370>] (__dev_change_flags) from [<c04c044c>] (dev_change_flags+0x18/0x48) [<c04c044c>] (dev_change_flags) from [<c052bafc>] (devinet_ioctl+0x6b4/0x7ac) [<c052bafc>] (devinet_ioctl) from [<c04a1428>] (sock_ioctl+0x1d8/0x2c0) [<c04a1428>] (sock_ioctl) from [<c014f054>] (do_vfs_ioctl+0x41c/0x600) [<c014f054>] (do_vfs_ioctl) from [<c014f2a4>] (SyS_ioctl+0x6c/0x7c) [<c014f2a4>] (SyS_ioctl) from [<c000ff60>] (ret_fast_syscall+0x0/0x1c) Fixes: 42f59967 ("net: ethernet: davinci_emac: add OF support") Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Aneesh Kumar K.V authored
BugLink: https://bugs.launchpad.net/bugs/1878232 commit 3b1dbfa1 upstream. The current code will set _PAGE_USER to the access flags for any fault address, because the ~ operation will be true for all address we take a fault on. But setting _PAGE_USER also means that the fault will be handled only if the page table have _PAGE_USER set. Hence there is no security hole with the current code. Now if it is an user space access, then the change in this patch really don't have an impact because we have (!ctx->kernel) set true and we take the if condition true. Now kernel context created fault on an address in the kernel range will result in a fault loop because we will not insert the hash pte due to access and pte permission mismatch. This patch fix the above issue. Fixes: f204e0b8 ("cxl: Driver code for powernv PCIe based cards for userspace access") Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Sergei Shtylyov authored
BugLink: https://bugs.launchpad.net/bugs/1878232 commit d57019d1 upstream. The driver of course "knows" that the chip's reset signal is active low, so it drives the GPIO to 0 to reset the PHY and to 1 otherwise; however all this will only work iff the GPIO is specified as active-high in the device tree! I think both the driver and the device trees (if there are any -- I was unable to find them) need to be fixed in this case... Fixes: 13a56b44 ("net: phy: at803x: Add support for hardware reset") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Vivien Didelot authored
BugLink: https://bugs.launchpad.net/bugs/1878232 commit be1faa92 upstream. Currently the port based VLAN maps should be configured to allow every port to egress frames on all other ports, except themselves. The debugfs interface shows that they are misconfigured. For instance, a 7-port switch has the following content in the related register 0x06: GLOBAL GLOBAL2 SERDES 0 1 2 3 4 5 6 ... 6: 1fa4 1f0f 4 7f 7e 7d 7c 7b 7a 79 ... This means that port 3 is allowed to talk to port 2-6, but cannot talk to ports 0 and 1. With this fix, port 3 can correctly talk to all ports except 3 itself: GLOBAL GLOBAL2 SERDES 0 1 2 3 4 5 6 ... 6: 1fa4 1f0f 4 7e 7d 7b 77 6f 5f 3f ... Fixes: ede8098d ("net: dsa: mv88e6xxx: bridges do not need an FID") Reported-by:
Kevin Smith <kevin.smith@elecsyscorp.com> Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
-
Charles Keepax authored
BugLink: https://bugs.launchpad.net/bugs/1878232 commit 6333ef46 upstream. As we now free the constraints in regulator_dev_release we will still call free on the constraints pointer even if we went down an error path in regulator_register, because it is only allocated after the device_register. As such we no longer need to free rdev->constraints on the error paths, so this patch removes said frees. Fixes: 29f5f486 ("regulator: core: Move more deallocation into class unregister") Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
-
Nicolas Schichan authored
BugLink: https://bugs.launchpad.net/bugs/1878232 commit 3b89624a upstream. The code in txq_put_data() would use txq->tx_curr_desc to index the tso_hdrs/tso_hdrs_dma buffers, for less than 8 bytes unaligned fragments, which is already moved to the next descriptor at the beginning of the function. If that fragment was the last of the the skb, the next skb would use that same space to place the ip headers, overwritting that small fragment data. Fixes: 91986fd3 (net: mv643xx_eth: Ensure proper data alignment in TSO TX path) Signed-off-by:
Nicolas Schichan <nschichan@freebox.fr> Reviewed-by:
Philipp Kirchhofer <philipp@familie-kirchhofer.de> Signed-off-by:
-
Florian Fainelli authored
BugLink: https://bugs.launchpad.net/bugs/1878232 commit 386512d1 upstream. In case any operation fails before we can successfully go the point where we would register a MDIO bus, we would be going to an error label which involves unregistering then freeing this yet to be created MDIO bus. Update all error paths to go to label free which is the only one valid until either the clock is enabled, or the MDIO bus is allocated and registered. This fixes kernel oops observed while trying to dereference the MDIO bus structure which is not yet allocated. Fixes: a1702857 ("net: Add support for the OpenCores 10/100 Mbps Ethernet MAC.") Signed-off-by:
-
