- 31 Jul, 2024 17 commits
-
-
James Chapman authored
Move the work of closing all tunnels from the pernet exit hook to pre_exit since the core does rcu synchronisation between these steps and we can therefore remove rcu_barrier from l2tp code. Signed-off-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
Tom Parkin <tparkin@katalix.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
James Chapman authored
l2tp eth/ppp pseudowire setup/cleanup uses kfree() in some error paths. Drop the refcount instead such that the session object is always freed when the refcount reaches 0. Signed-off-by:
-
James Chapman authored
l2tp_session_register uses an idr_alloc then idr_replace pattern to insert sessions into the session IDR. To catch invalid locking, add a WARN_ON_ONCE if the IDR entry is modified by another thread between alloc and replace steps. Also add comments to make expectations clear. Signed-off-by:
-
James Chapman authored
l2tp_v3_session_htable and tunnel->session_list are read by lockless getters using RCU. Use rcu list variants when adding or removing list items. Signed-off-by:
-
James Chapman authored
When a session is created, it sets a backpointer to its tunnel. When the session refcount drops to 0, l2tp_session_free drops the tunnel refcount if session->tunnel is non-NULL. However, session->tunnel is set in l2tp_session_create, before the tunnel refcount is incremented by l2tp_session_register, which leaves a small window where session->tunnel is non-NULL when the tunnel refcount hasn't been bumped. Moving the assignment to l2tp_session_register is trivial but l2tp_session_create calls l2tp_session_set_header_len which uses session->tunnel to get the tunnel's encap. Add an encap arg to l2tp_session_set_header_len to avoid using session->tunnel. If l2tpv3 sessions have colliding IDs, it is possible for l2tp_v3_session_get to race with l2tp_session_register and fetch a session which doesn't yet have session->tunnel set. Add a check for this case. Signed-off-by:
-
James Chapman authored
Each l2tp ppp session has an associated pppox socket. l2tp_ppp uses the session's pppox socket refcount to manage session lifetimes; the pppox socket holds a ref on the session which is dropped by the socket destructor. This complicates session cleanup. Given l2tp sessions are refcounted, it makes more sense to reverse this relationship such that the session keeps the socket alive, not the other way around. So refactor l2tp_ppp to have the session hold a ref on its socket while it references it. When the session is closed, it drops its socket ref when it detaches from its socket. If the socket is closed first, it initiates the closing of its session, if one is attached. The socket/session can then be freed asynchronously when their refcounts drop to 0. Use the session's session_close callback to detach the pppox socket since this will be done on the work queue together with the rest of the session cleanup via l2tp_session_delete. Also, since l2tp_ppp uses the pppox socket's sk_user_data, use the rcu sk_user_data access helpers when accessing it and set the socket's SOCK_RCU_FREE flag to have pppox sockets freed by rcu. Signed-off-by:
-
James Chapman authored
l2tp sessions may be accessed under an rcu read lock. Have them freed via rcu and remove the now unneeded synchronize_rcu when a session is removed. Signed-off-by:
-
James Chapman authored
When a tunnel is closed, l2tp_tunnel_closeall closes all sessions in the tunnel. Move the work of deleting each session to the work queue so that sessions are deleted using the same codepath whether they are closed by user API request or their parent tunnel is closing. This also avoids the locking dance in l2tp_tunnel_closeall where the tunnel's session list lock was unlocked and relocked in the loop. In l2tp_exit_net, use drain_workqueue instead of flush_workqueue because the processing of tunnel_delete work may queue session_delete work items which must also be processed. Signed-off-by:
-
James Chapman authored
When the l2tp tunnel socket used sk_user_data to point to its associated l2tp tunnel, socket and tunnel cleanup had to make use of the socket's destructor to free the tunnel only when the socket could no longer be accessed. Now that sk_user_data is no longer used, we can simplify socket and tunnel cleanup: * If the tunnel closes first, it cleans up and drops its socket ref when the tunnel refcount drops to zero. If its socket was provided by userspace, the socket is closed and freed asynchronously, when userspace closes it. If its socket is a kernel socket, the tunnel closes the socket itself during cleanup and drops its socket ref when the tunnel's refcount drops to zero. * If the socket closes first, we initiate the closing of its associated tunnel. For UDP sockets, this is via the socket's encap_destroy hook. For L2TPIP sockets, this is via the socket's destroy callback. The tunnel holds a socket ref while it references the sock. When the tunnel is freed, it drops its socket ref and the socket will be cleaned up when its own refcount drops to zero, asynchronous to the tunnel free. * The tunnel socket destructor is no longer needed since the tunnel is no longer freed through the socket destructor. Signed-off-by: -
James Chapman authored
Since l2tp no longer derives tunnel pointers directly via sk_user_data, it is no longer useful for l2tp to check tunnel pointers using a magic feather. Drop the tunnel's magic field. Signed-off-by:
-
James Chapman authored
l2tp no longer uses the tunnel socket's sk_user_data so drop the code which sets it. In l2tp_validate_socket use l2tp_sk_to_tunnel to check whether a given socket is already attached to an l2tp tunnel since we can no longer use non-null sk_user_data to indicate this. Signed-off-by:
-
James Chapman authored
l2tp's ppp procfs output can be used to show internal state of pppol2tp. It includes a 'user-data-ok' field, which is derived from the tunnel socket's sk_user_data being non-NULL. Use tunnel->sock being non-NULL to indicate this instead. Signed-off-by:
-
James Chapman authored
Use the recently exported ip_flush_pending_frames instead of a free-coded version and lock the socket while we call it. Signed-off-by:
-
James Chapman authored
To avoid protocol modules implementing their own, export ip_flush_pending_frames. Signed-off-by:
-
James Chapman authored
l2tp_sk_to_tunnel derives the tunnel from sk_user_data. Instead, lookup the tunnel by walking the tunnel IDR for a tunnel using the indicated sock. This is slow but l2tp_sk_to_tunnel is not used in the datapath so performance isn't critical. l2tp_tunnel_destruct needs a variant of l2tp_sk_to_tunnel which does not bump the tunnel refcount since the tunnel refcount is already 0. Change l2tp_sk_to_tunnel sk arg to const since it does not modify sk. Signed-off-by:
-
Dr. David Alan Gilbert authored
The goo.gl URL shortener is deprecated and is due to stop expanding existing links in 2025. Expand the link in Kconfig. Signed-off-by:
Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240729205337.48058-1-linux@treblig.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Joe Damato authored
Use net_prefetch to remove #ifdef and simplify prefetch logic. This follows the pattern introduced in a previous commit f468f21b ("net: Take common prefetch code structure into a function"), which replaced the same logic in all existing drivers at that time. Signed-off-by:
Joe Damato <jdamato@fastly.com> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Link: https://patch.msgid.link/20240729152651.258713-1-jdamato@fastly.comSigned-off-by:
-
- 25 Jul, 2024 23 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and netfilter. A lot of networking people were at a conference last week, busy catching COVID, so relatively short PR. Current release - regressions: - tcp: process the 3rd ACK with sk_socket for TFO and MPTCP Current release - new code bugs: - l2tp: protect session IDR and tunnel session list with one lock, make sure the state is coherent to avoid a warning - eth: bnxt_en: update xdp_rxq_info in queue restart logic - eth: airoha: fix location of the MBI_RX_AGE_SEL_MASK field Previous releases - regressions: - xsk: require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len, the field reuses previously un-validated pad Previous releases - always broken: - tap/tun: drop short frames to prevent crashes later in the stack - eth: ice: add a per-VF limit on number of FDIR filters - af_unix: disable MSG_OOB handling for sockets in sockmap/sockhash" * tag 'net-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits) tun: add missing verification for short frame tap: add missing verification for short frame mISDN: Fix a use after free in hfcmulti_tx() gve: Fix an edge case for TSO skb validity check bnxt_en: update xdp_rxq_info in queue restart logic tcp: process the 3rd ACK with sk_socket for TFO/MPTCP selftests/bpf: Add XDP_UMEM_TX_METADATA_LEN to XSK TX metadata test xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len bpf: Fix a segment issue when downgrading gso_size net: mediatek: Fix potential NULL pointer dereference in dummy net_device handling MAINTAINERS: make Breno the netconsole maintainer MAINTAINERS: Update bonding entry net: nexthop: Initialize all fields in dumped nexthops net: stmmac: Correct byte order of perfect_match selftests: forwarding: skip if kernel not support setting bridge fdb learning limit tipc: Return non-zero value from tipc_udp_addr2str() on error netfilter: nft_set_pipapo_avx2: disable softinterrupts ice: Fix recipe read procedure ice: Add a per-VF limit on number of FDIR filters net: bonding: correctly annotate RCU in bond_should_notify_peers() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linuxLinus Torvalds authored
Pull printk updates from Petr Mladek: - trivial printk changes The bigger "real" printk work is still being discussed. * tag 'printk-for-6.11-trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: vsprintf: add missing MODULE_DESCRIPTION() macro printk: Rename console_replay_all() and update context
-
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctlLinus Torvalds authored
Pull sysctl constification from Joel Granados: "Treewide constification of the ctl_table argument of proc_handlers using a coccinelle script and some manual code formatting fixups. This is a prerequisite to moving the static ctl_table structs into read-only data section which will ensure that proc_handler function pointers cannot be modified" * tag 'constfy-sysctl-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: sysctl: treewide: constify the ctl_table argument of proc_handlers
-
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efiLinus Torvalds authored
Pull EFI fixes from Ard Biesheuvel: - Wipe screen_info after allocating it from the heap - used by arm32 and EFI zboot, other EFI architectures allocate it statically - Revert to allocating boot_params from the heap on x86 when entering via the native PE entrypoint, to work around a regression on older Dell hardware * tag 'efi-fixes-for-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: x86/efistub: Revert to heap allocated boot_params for PE entrypoint efi/libstub: Zero initialize heap allocated struct screen_info
-
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linuxLinus Torvalds authored
Pull kgdb updates from Daniel Thompson: "Three small changes this cycle: - Clean up an architecture abstraction that is no longer needed because all the architectures have converged. - Actually use the prompt argument to kdb_position_cursor() instead of ignoring it (functionally this fix is a nop but that was due to luck rather than good judgement) - Fix a -Wformat-security warning" * tag 'kgdb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: kdb: Get rid of redundant kdb_curr_task() kdb: Use the passed prompt in kdb_position_cursor() kdb: address -Wformat-security warnings -
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS updates from Thomas Bogendoerfer: - Use improved timer sync for Loongson64 - Fix address of GCR_ACCESS register - Add missing MODULE_DESCRIPTION * tag 'mips_6.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: mips: sibyte: add missing MODULE_DESCRIPTION() macro MIPS: SMP-CPS: Fix address for GCR_ACCESS register for CM3 and later MIPS: Loongson64: Switch to SYNC_R4K
-
Linus Torvalds authored
Merge tag 'parisc-for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "The gettimeofday() and clock_gettime() syscalls are now available as vDSO functions, and Dave added a patch which allows to use NVMe cards in the PCI slots as fast and easy alternative to SCSI discs. Summary: - add gettimeofday() and clock_gettime() vDSO functions - enable PCI_MSI_ARCH_FALLBACKS to allow PCI to PCIe bridge adaptor with PCIe NVME card to function in parisc machines - allow users to reduce kernel unaligned runtime warnings - minor code cleanups" * tag 'parisc-for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Add support for CONFIG_SYSCTL_ARCH_UNALIGN_NO_WARN parisc: Use max() to calculate parisc_tlb_flush_threshold parisc: Fix warning at drivers/pci/msi/msi.h:121 parisc: Add 64-bit gettimeofday() and clock_gettime() vDSO functions parisc: Add 32-bit gettimeofday() and clock_gettime() vDSO functions parisc: Clean up unistd.h file
-
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linuxLinus Torvalds authored
Pull UML updates from Richard Weinberger: - Support for preemption - i386 Rust support - Huge cleanup by Benjamin Berg - UBSAN support - Removal of dead code * tag 'uml-for-linus-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (41 commits) um: vector: always reset vp->opened um: vector: remove vp->lock um: register power-off handler um: line: always fill *error_out in setup_one_line() um: remove pcap driver from documentation um: Enable preemption in UML um: refactor TLB update handling um: simplify and consolidate TLB updates um: remove force_flush_all from fork_handler um: Do not flush MM in flush_thread um: Delay flushing syscalls until the thread is restarted um: remove copy_context_skas0 um: remove LDT support um: compress memory related stub syscalls while adding them um: Rework syscall handling um: Add generic stub_syscall6 function um: Create signal stack memory assignment in stub_data um: Remove stub-data.h include from common-offsets.h um: time-travel: fix signal blocking race/hang um: time-travel: remove time_exit() ...
-
Linus Torvalds authored
Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big set of driver core changes for 6.11-rc1. Lots of stuff in here, with not a huge diffstat, but apis are evolving which required lots of files to be touched. Highlights of the changes in here are: - platform remove callback api final fixups (Uwe took many releases to get here, finally!) - Rust bindings for basic firmware apis and initial driver-core interactions. It's not all that useful for a "write a whole driver in rust" type of thing, but the firmware bindings do help out the phy rust drivers, and the driver core bindings give a solid base on which others can start their work. There is still a long way to go here before we have a multitude of rust drivers being added, but it's a great first step. - driver core const api changes. This reached across all bus types, and there are some fix-ups for some not-common bus types that linux-next and 0-day testing shook out. This work is being done to help make the rust bindings more safe, as well as the C code, moving toward the end-goal of allowing us to put driver structures into read-only memory. We aren't there yet, but are getting closer. - minor devres cleanups and fixes found by code inspection - arch_topology minor changes - other minor driver core cleanups All of these have been in linux-next for a very long time with no reported problems" * tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) ARM: sa1100: make match function take a const pointer sysfs/cpu: Make crash_hotplug attribute world-readable dio: Have dio_bus_match() callback take a const * zorro: make match function take a const pointer driver core: module: make module_[add|remove]_driver take a const * driver core: make driver_find_device() take a const * driver core: make driver_[create|remove]_file take a const * firmware_loader: fix soundness issue in `request_internal` firmware_loader: annotate doctests as `no_run` devres: Correct code style for functions that return a pointer type devres: Initialize an uninitialized struct member devres: Fix memory leakage caused by driver API devm_free_percpu() devres: Fix devm_krealloc() wasting memory driver core: platform: Switch to use kmemdup_array() driver core: have match() callback in struct bus_type take a const * MAINTAINERS: add Rust device abstractions to DRIVER CORE device: rust: improve safety comments MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER firmware: rust: improve safety comments ...
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog updates from Wim Van Sebroeck: - make watchdog_class const - rework of the rzg2l_wdt driver - other small fixes and improvements * tag 'linux-watchdog-6.11-rc1' of git://www.linux-watchdog.org/linux-watchdog: dt-bindings: watchdog: dlg,da9062-watchdog: Drop blank space watchdog: rzn1: Convert comma to semicolon watchdog: lenovo_se10_wdt: Convert comma to semicolon dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support watchdog: rzg2l_wdt: Add suspend/resume support watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset watchdog: rzg2l_wdt: Remove comparison with zero watchdog: rzg2l_wdt: Remove reset de-assert from probe watchdog: rzg2l_wdt: Check return status of pm_runtime_put() watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get() watchdog: rzg2l_wdt: Make the driver depend on PM watchdog: rzg2l_wdt: Restrict the driver to ARCH_RZG2L and ARCH_R9A09G011 watchdog: imx7ulp_wdt: keep already running watchdog enabled watchdog: starfive: Add missing clk_disable_unprepare() watchdog: Make watchdog_class const
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fix from Christoph Hellwig: - fix the order of actions in dmam_free_coherent (Lance Richardson) * tag 'dma-mapping-6.11-2024-07-24' of git://git.infradead.org/users/hch/dma-mapping: dma: fix call order in dmam_free_coherent
-
Jakub Kicinski authored
Dongli Zhang says: ==================== tap/tun: harden by dropping short frame This is to harden all of tap/tun to avoid any short frame smaller than the Ethernet header (ETH_HLEN). While the xen-netback already rejects short frame smaller than ETH_HLEN ... 914 static void xenvif_tx_build_gops(struct xenvif_queue *queue, 915 int budget, 916 unsigned *copy_ops, 917 unsigned *map_ops) 918 { ... ... 1007 if (unlikely(txreq.size < ETH_HLEN)) { 1008 netdev_dbg(queue->vif->dev, 1009 "Bad packet size: %d\n", txreq.size); 1010 xenvif_tx_err(queue, &txreq, extra_count, idx); 1011 break; 1012 } ... the short frame may not be dropped by vhost-net/tap/tun. This fixes CVE-2024-41090 and CVE-2024-41091. ==================== Link: https://patch.msgid.link/20240724170452.16837-1-dongli.zhang@oracle.comSigned-off-by: -
Dongli Zhang authored
The cited commit missed to check against the validity of the frame length in the tun_xdp_one() path, which could cause a corrupted skb to be sent downstack. Even before the skb is transmitted, the tun_xdp_one-->eth_type_trans() may access the Ethernet header although it can be less than ETH_HLEN. Once transmitted, this could either cause out-of-bound access beyond the actual length, or confuse the underlayer with incorrect or inconsistent header length in the skb metadata. In the alternative path, tun_get_user() already prohibits short frame which has the length less than Ethernet header size from being transmitted for IFF_TAP. This is to drop any frame shorter than the Ethernet header size just like how tun_get_user() does. CVE: CVE-2024-41091 Inspired-by: https://lore.kernel.org/netdev/1717026141-25716-1-git-send-email-si-wei.liu@oracle.com/ Fixes: 043d222f ("tuntap: accept an array of XDP buffs through sendmsg()") Cc: stable@vger.kernel.org Signed-off-by:
Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by:
Si-Wei Liu <si-wei.liu@oracle.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20240724170452.16837-3-dongli.zhang@oracle.comSigned-off-by:
-
Si-Wei Liu authored
The cited commit missed to check against the validity of the frame length in the tap_get_user_xdp() path, which could cause a corrupted skb to be sent downstack. Even before the skb is transmitted, the tap_get_user_xdp()-->skb_set_network_header() may assume the size is more than ETH_HLEN. Once transmitted, this could either cause out-of-bound access beyond the actual length, or confuse the underlayer with incorrect or inconsistent header length in the skb metadata. In the alternative path, tap_get_user() already prohibits short frame which has the length less than Ethernet header size from being transmitted. This is to drop any frame shorter than the Ethernet header size just like how tap_get_user() does. CVE: CVE-2024-41090 Link: https://lore.kernel.org/netdev/1717026141-25716-1-git-send-email-si-wei.liu@oracle.com/ Fixes: 0efac277 ("tap: accept an array of XDP buffs through sendmsg()") Cc: stable@vger.kernel.org Signed-off-by:
-
Dan Carpenter authored
Don't dereference *sp after calling dev_kfree_skb(*sp). Fixes: af69fb3a ("Add mISDN HFC multiport driver") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
-
Bailey Forrest authored
The NIC requires each TSO segment to not span more than 10 descriptors. NIC further requires each descriptor to not exceed 16KB - 1 (GVE_TX_MAX_BUF_SIZE_DQO). The descriptors for an skb are generated by gve_tx_add_skb_no_copy_dqo() for DQO RDA queue format. gve_tx_add_skb_no_copy_dqo() loops through each skb frag and generates a descriptor for the entire frag if the frag size is not greater than GVE_TX_MAX_BUF_SIZE_DQO. If the frag size is greater than GVE_TX_MAX_BUF_SIZE_DQO, it is split into descriptor(s) of size GVE_TX_MAX_BUF_SIZE_DQO and a descriptor is generated for the remainder (frag size % GVE_TX_MAX_BUF_SIZE_DQO). gve_can_send_tso() checks if the descriptors thus generated for an skb would meet the requirement that each TSO-segment not span more than 10 descriptors. However, the current code misses an edge case when a TSO segment spans multiple descriptors within a large frag. This change fixes the edge case. gve_can_send_tso() relies on the assumption that max gso size (9728) is less than GVE_TX_MAX_BUF_SIZE_DQO and therefore within an skb fragment a TSO segment can never span more than 2 descriptors. Fixes: a57e5de4 ("gve: DQO: Add TX path") Signed-off-by:
Praveen Kaligineedi <pkaligineedi@google.com> Signed-off-by:
Bailey Forrest <bcf@google.com> Reviewed-by:
Jeroen de Borst <jeroendb@google.com> Cc: stable@vger.kernel.org Reviewed-by:
-
Taehee Yoo authored
When the netdev_rx_queue_restart() restarts queues, the bnxt_en driver updates(creates and deletes) a page_pool. But it doesn't update xdp_rxq_info, so the xdp_rxq_info is still connected to an old page_pool. So, bnxt_rx_ring_info->page_pool indicates a new page_pool, but bnxt_rx_ring_info->xdp_rxq is still connected to an old page_pool. An old page_pool is no longer used so it is supposed to be deleted by page_pool_destroy() but it isn't. Because the xdp_rxq_info is holding the reference count for it and the xdp_rxq_info is not updated, an old page_pool will not be deleted in the queue restart logic. Before restarting 1 queue: ./tools/net/ynl/samples/page-pool enp10s0f1np1[6] page pools: 4 (zombies: 0) refs: 8192 bytes: 33554432 (refs: 0 bytes: 0) recycling: 0.0% (alloc: 128:8048 recycle: 0:0) After restarting 1 queue: ./tools/net/ynl/samples/page-pool enp10s0f1np1[6] page pools: 5 (zombies: 0) refs: 10240 bytes: 41943040 (refs: 0 bytes: 0) recycling: 20.0% (alloc: 160:10080 recycle: 1920:128) Before restarting queues, an interface has 4 page_pools. After restarting one queue, an interface has 5 page_pools, but it should be 4, not 5. The reason is that queue restarting logic creates a new page_pool and an old page_pool is not deleted due to the absence of an update of xdp_rxq_info logic. Fixes: 2d694c27 ("bnxt_en: implement netdev_queue_mgmt_ops") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Reviewed-by:
David Wei <dw@davidwei.uk> Reviewed-by:
Somnath Kotur <somnath.kotur@broadcom.com> Link: https://patch.msgid.link/20240721053554.1233549-1-ap420073@gmail.comSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2024-07-25 We've added 14 non-merge commits during the last 8 day(s) which contain a total of 19 files changed, 177 insertions(+), 70 deletions(-). The main changes are: 1) Fix af_unix to disable MSG_OOB handling for sockets in BPF sockmap and BPF sockhash. Also add test coverage for this case, from Michal Luczaj. 2) Fix a segmentation issue when downgrading gso_size in the BPF helper bpf_skb_adjust_room(), from Fred Li. 3) Fix a compiler warning in resolve_btfids due to a missing type cast, from Liwei Song. 4) Fix stack allocation for arm64 to align the stack pointer at a 16 byte boundary in the fexit_sleep BPF selftest, from Puranjay Mohan. 5) Fix a xsk regression to require a flag when actuating tx_metadata_len, from Stanislav Fomichev. 6) Fix function prototype BTF dumping in libbpf for prototypes that have no input arguments, from Andrii Nakryiko. 7) Fix stacktrace symbol resolution in perf script for BPF programs containing subprograms, from Hou Tao. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Add XDP_UMEM_TX_METADATA_LEN to XSK TX metadata test xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len bpf: Fix a segment issue when downgrading gso_size tools/resolve_btfids: Fix comparison of distinct pointer types warning in resolve_btfids bpf, events: Use prog to emit ksymbol event for main program selftests/bpf: Test sockmap redirect for AF_UNIX MSG_OOB selftests/bpf: Parametrize AF_UNIX redir functions to accept send() flags selftests/bpf: Support SOCK_STREAM in unix_inet_redir_to_connected() af_unix: Disable MSG_OOB handling for sockets in sockmap/sockhash bpftool: Fix typo in usage help libbpf: Fix no-args func prototype BTF dumping syntax MAINTAINERS: Update powerpc BPF JIT maintainers MAINTAINERS: Update email address of Naveen selftests/bpf: fexit_sleep: Fix stack allocation for arm64 ==================== Link: https://patch.msgid.link/20240725114312.32197-1-daniel@iogearbox.netSigned-off-by:
-
Matthieu Baerts (NGI0) authored
The 'Fixes' commit recently changed the behaviour of TCP by skipping the processing of the 3rd ACK when a sk->sk_socket is set. The goal was to skip tcp_ack_snd_check() in tcp_rcv_state_process() not to send an unnecessary ACK in case of simultaneous connect(). Unfortunately, that had an impact on TFO and MPTCP. I started to look at the impact on MPTCP, because the MPTCP CI found some issues with the MPTCP Packetdrill tests [1]. Then Paolo Abeni suggested me to look at the impact on TFO with "plain" TCP. For MPTCP, when receiving the 3rd ACK of a request adding a new path (MP_JOIN), sk->sk_socket will be set, and point to the MPTCP sock that has been created when the MPTCP connection got established before with the first path. The newly added 'goto' will then skip the processing of the segment text (step 7) and not go through tcp_data_queue() where the MPTCP options are validated, and some actions are triggered, e.g. sending the MPJ 4th ACK [2] as demonstrated by the new errors when running a packetdrill test [3] establishing a second subflow. This doesn't fully break MPTCP, mainly the 4th MPJ ACK that will be delayed. Still, we don't want to have this behaviour as it delays the switch to the fully established mode, and invalid MPTCP options in this 3rd ACK will not be caught any more. This modification also affects the MPTCP + TFO feature as well, and being the reason why the selftests started to be unstable the last few days [4]. For TFO, the existing 'basic-cookie-not-reqd' test [5] was no longer passing: if the 3rd ACK contains data, and the connection is accept()ed before receiving them, these data would no longer be processed, and thus not ACKed. One last thing about MPTCP, in case of simultaneous connect(), a fallback to TCP will be done, which seems fine: `../common/defaults.sh` 0 socket(..., SOCK_STREAM|SOCK_NONBLOCK, IPPROTO_MPTCP) = 3 +0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress) +0 > S 0:0(0) <mss 1460, sackOK, TS val 100 ecr 0, nop, wscale 8, mpcapable v1 flags[flag_h] nokey> +0 < S 0:0(0) win 1000 <mss 1460, sackOK, TS val 407 ecr 0, nop, wscale 8, mpcapable v1 flags[flag_h] nokey> +0 > S. 0:0(0) ack 1 <mss 1460, sackOK, TS val 330 ecr 0, nop, wscale 8, mpcapable v1 flags[flag_h] nokey> +0 < S. 0:0(0) ack 1 win 65535 <mss 1460, sackOK, TS val 700 ecr 100, nop, wscale 8, mpcapable v1 flags[flag_h] key[skey=2]> +0 > . 1:1(0) ack 1 <nop, nop, TS val 845707014 ecr 700, nop, nop, sack 0:1> Simultaneous SYN-data crossing is also not supported by TFO, see [6]. Kuniyuki Iwashima suggested to restrict the processing to SYN+ACK only: that's a more generic solution than the one initially proposed, and also enough to fix the issues described above. Later on, Eric Dumazet mentioned that an ACK should still be sent in reaction to the second SYN+ACK that is received: not sending a DUPACK here seems wrong and could hurt: 0 socket(..., SOCK_STREAM|SOCK_NONBLOCK, IPPROTO_TCP) = 3 +0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress) +0 > S 0:0(0) <mss 1460, sackOK, TS val 1000 ecr 0,nop,wscale 8> +0 < S 0:0(0) win 1000 <mss 1000, sackOK, nop, nop> +0 > S. 0:0(0) ack 1 <mss 1460, sackOK, TS val 3308134035 ecr 0,nop,wscale 8> +0 < S. 0:0(0) ack 1 win 1000 <mss 1000, sackOK, nop, nop> +0 > . 1:1(0) ack 1 <nop, nop, sack 0:1> // <== Here So in this version, the 'goto consume' is dropped, to always send an ACK when switching from TCP_SYN_RECV to TCP_ESTABLISHED. This ACK will be seen as a DUPACK -- with DSACK if SACK has been negotiated -- in case of simultaneous SYN crossing: that's what is expected here. Link: https://github.com/multipath-tcp/mptcp_net-next/actions/runs/9936227696 [1] Link: https://datatracker.ietf.org/doc/html/rfc8684#fig_tokens [2] Link: https://github.com/multipath-tcp/packetdrill/blob/mptcp-net-next/gtests/net/mptcp/syscalls/accept.pkt#L28 [3] Link: https://netdev.bots.linux.dev/contest.html?executor=vmksft-mptcp-dbg&test=mptcp-connect-sh [4] Link: https://github.com/google/packetdrill/blob/master/gtests/net/tcp/fastopen/server/basic-cookie-not-reqd.pkt#L21 [5] Link: https://github.com/google/packetdrill/blob/master/gtests/net/tcp/fastopen/client/simultaneous-fast-open.pkt [6] Fixes: 23e89e8e ("tcp: Don't drop SYN+ACK for simultaneous connect().") Suggested-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Suggested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by:
-
Stanislav Fomichev authored
This flag is now required to use tx_metadata_len. Fixes: 40808a23 ("selftests/bpf: Add TX side to xdp_metadata") Reported-by:
Julian Schindel <mail@arctic-alpaca.de> Signed-off-by:
Stanislav Fomichev <sdf@fomichev.me> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20240713015253.121248-3-sdf@fomichev.me
-
Stanislav Fomichev authored
Julian reports that commit 341ac980 ("xsk: Support tx_metadata_len") can break existing use cases which don't zero-initialize xdp_umem_reg padding. Introduce new XDP_UMEM_TX_METADATA_LEN to make sure we interpret the padding as tx_metadata_len only when being explicitly asked. Fixes: 341ac980 ("xsk: Support tx_metadata_len") Reported-by:
-
Fred Li authored
Linearize the skb when downgrading gso_size because it may trigger a BUG_ON() later when the skb is segmented as described in [1,2]. Fixes: 2be7e212 ("bpf: add bpf_skb_adjust_room helper") Signed-off-by:
Fred Li <dracodingfly@gmail.com> Signed-off-by:
-
Breno Leitao authored
Move the freeing of the dummy net_device from mtk_free_dev() to mtk_remove(). Previously, if alloc_netdev_dummy() failed in mtk_probe(), eth->dummy_dev would be NULL. The error path would then call mtk_free_dev(), which in turn called free_netdev() assuming dummy_dev was allocated (but it was not), potentially causing a NULL pointer dereference. By moving free_netdev() to mtk_remove(), we ensure it's only called when mtk_probe() has succeeded and dummy_dev is fully allocated. This addresses a potential NULL pointer dereference detected by Smatch[1]. Fixes: b209bd6d ("net: mediatek: mtk_eth_sock: allocate dummy net_device dynamically") Reported-by:
Breno Leitao <leitao@debian.org> Reviewed-by:
-
