- 22 Feb, 2024 5 commits
-
-
Cristian Marussi authored
And finally update the supported clock protocol version to v3.2(0x30000). Signed-off-by:
Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20240214183006.3403207-6-cristian.marussi@arm.comSigned-off-by:
Sudeep Holla <sudeep.holla@arm.com>
-
Cristian Marussi authored
Add a common enum to define the standard clock OEM types defined by the SCMI specification, so as to enable the configuration of such extended configuration properties with the existent clock protocol operations. Signed-off-by:
-
Cristian Marussi authored
SCMI v3.2 added support to set/get clock custom OEM types; such support is conditionally present, though, depending on an extended config attribute bit possibly advertised by the platform server on a per-domain base. Add a check to verify if OEM types are supported before allowing any kind of OEM-specific get/set operation. Also add a check around all the new v3.2 clock features. Signed-off-by:
-
Cristian Marussi authored
Freshly introduced NEGOTIATE_PROTOCOL_VERSION allows the agent to ascertain upfront if a specific protocol(usually older) version is supported by the platform. It is used by the agent in case the platform has advertised the support of a newer protocol version than the latest version supported by the agent, since backward compatibility cannot be automatically assumed. Emit a warning about possible incompatibility when negotiation was not possible or just print the successfully negotiated protocol. Signed-off-by:
-
Randy Dunlap authored
Fix the kernel-doc notation for the nested union in struct scmi_optee_channel to eliminate kernel-doc warnings: | optee.c:130: warning: Excess struct member 'shmem' description | in 'scmi_optee_channel' | optee.c:131: warning: Function parameter or struct member 'req' | not described in 'scmi_optee_channel' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Reviewed-by:
-
- 20 Feb, 2024 17 commits
-
-
Cristian Marussi authored
Extend the perf notification report to include pre-calculated frequencies corresponding to the reported limits/levels event; such frequencies are properly computed based on the stored known OPPs information taking into consideration if the current operating mode is level indexed or not. Signed-off-by:
-
Cristian Marussi authored
Store all the discovered OPPs into the XArray opps_by_lvl even when level_indexing mode is not used, since it comes handy to easily retrieve OPPs by level. Signed-off-by:
-
Cristian Marussi authored
Add a preliminary check to verify if the powercap protocol related notify enable commands are supported at all by the SCMI platform, and then provide the callback needed to allow the core SCMI notification subsytem to do a fine-grain check if a specific resource domain supports notifications. Signed-off-by:
-
Cristian Marussi authored
Add a preliminary check to verify if the reset protocol related notify enable commands are supported at all by the SCMI platform, and then provide the callback needed to allow the core SCMI notification subsytem to do a fine-grain check if a specific resource domain supports notifications. Signed-off-by:
-
Cristian Marussi authored
Add a preliminary check to verify if the sensor protocol related notify enable commands are supported at all by the SCMI platform, and then provide the callback needed to allow the core SCMI notification subsytem to do a fine-grain check if a specific resource domain supports notifications. Signed-off-by:
-
Cristian Marussi authored
Add a preliminary check to verify if the clock protocol related notify enable commands are supported at all by the SCMI platform, and then provide the callback needed to allow the core SCMI notification subsytem to do a fine-grain check if a specific resource domain supports notifications. Signed-off-by:
-
Cristian Marussi authored
Add a preliminary check to verify if the system power protocol related notify enable commands are supported at all by the SCMI platform, and then provide the callback needed to allow the core SCMI notification subsytem to do a fine-grain check if a specific resource domain supports notifications. Signed-off-by:
-
Cristian Marussi authored
Add a preliminary check to verify if the power related notify enable commands are supported at all by the SCMI platform, and then provide the callback needed to allow the core SCMI notification subsytem to do a fine-grain check if a specific resource domain supports notifications. Signed-off-by:
-
Cristian Marussi authored
Add a preliminary check to verify if the performance related notify enable commands are supported at all by the SCMI platform, and then provide the callback needed to allow the core SCMI notification subsytem to do a fine-grain check if a specific resource domain supports notifications. Signed-off-by:
-
Cristian Marussi authored
A common helper is provided to check if a specific protocol message is supported or not. Signed-off-by:
-
Cristian Marussi authored
When registering protocol events, use the optional .is_notify_supported callback provided by the protocol to check if that specific notification type is available for that particular resource on the running system, marking it as unsupported otherwise. Then, when a notification enable request is received, return an error if it was previously marked as unsuppported, so avoiding to send a needless notification enable command and check the returned value for failure. Signed-off-by:
-
Ricardo B. Marliere authored
Now that the driver core can properly handle constant struct bus_type, move the scmi_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Ricardo B. Marliere <ricardo@marliere.net> Reviewed-by:
-
Andre Przywara authored
When the generic SCMI code tears down a channel, it calls the chan_free callback function, defined by each transport. Since multiple protocols might share the same transport_info member, chan_free() might want to clean up the same member multiple times within the given SCMI transport implementation. In this case, it is SMC transport. This will lead to a NULL pointer dereference at the second time: | scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16 | arm-scmi firmware:scmi: SCMI Notifications - Core Enabled. | arm-scmi firmware:scmi: unable to communicate with SCMI | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 | Mem abort info: | ESR = 0x0000000096000004 | EC = 0x25: DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x04: level 0 translation fault | Data abort info: | ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 | CM = 0, WnR = 0, TnD = 0, TagAccess = 0 | GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881ef8000 | [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 | Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP | Modules linked in: | CPU: 4 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc2-00124-g455ef3d016c9-dirty #793 | Hardware name: FVP Base RevC (DT) | pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) | pc : smc_chan_free+0x3c/0x6c | lr : smc_chan_free+0x3c/0x6c | Call trace: | smc_chan_free+0x3c/0x6c | idr_for_each+0x68/0xf8 | scmi_cleanup_channels.isra.0+0x2c/0x58 | scmi_probe+0x434/0x734 | platform_probe+0x68/0xd8 | really_probe+0x110/0x27c | __driver_probe_device+0x78/0x12c | driver_probe_device+0x3c/0x118 | __driver_attach+0x74/0x128 | bus_for_each_dev+0x78/0xe0 | driver_attach+0x24/0x30 | bus_add_driver+0xe4/0x1e8 | driver_register+0x60/0x128 | __platform_driver_register+0x28/0x34 | scmi_driver_init+0x84/0xc0 | do_one_initcall+0x78/0x33c | kernel_init_freeable+0x2b8/0x51c | kernel_init+0x24/0x130 | ret_from_fork+0x10/0x20 | Code: f0004701 910a0021 aa1403e5 97b91c70 (b9400280) | ---[ end trace 0000000000000000 ]--- Simply check for the struct pointer being NULL before trying to access its members, to avoid this situation. This was found when a transport doesn't really work (for instance no SMC service), the probe routines then tries to clean up, and triggers a crash. Signed-off-by:Andre Przywara <andre.przywara@arm.com> Fixes: 1dc65580 ("firmware: arm_scmi: Add smc/hvc transport") Reviewed-by:
-
Peng Fan authored
ARM SCMI v3.2 introduces clock get permission command. To implement the same let us stash the values of those permissions in the scmi_clock_info. They indicate if the operation is forbidden or not. If the CLOCK_GET_PERMISSIONS command is not supported, the default permissions are set to allow the operations, otherwise they will be set according to the response of CLOCK_GET_PERMISSIONS from the SCMI platform firmware. Reviewed-by:
Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20240121110901.1414856-1-peng.fan@oss.nxp.comSigned-off-by:
-
Cristian Marussi authored
Add the capability for a SCMI driver to register to the core SCMI stack with multiple SCMI protocols. In such a case the SCMI driver probe function will end up being called once for each registered protocol which have been also found as implemented on the platform. This is especially useful in testing scenarios. Signed-off-by:
-
Cristian Marussi authored
Accessing clock domains descriptors by the index from the SCMI drivers can potentially lead to out-of-bound violations if the SCMI drivers misbehaves. Use a common helper to check the consistency of such accesses. Signed-off-by:
-
Sudeep Holla authored
When (sustained_freq_khz * 1000) is less than sustained_perf_level, the multiplier will be less than 1 and hence rounded down as 0. Similarly if it is not multiple of sustained_perf_level the dom_info->mult_factor will contain rounded down value and will end up impacting all the frequency calculations done using it. Add warning if and when the domain frequency multiplier is 0 or rounded down so that it gives a clue to get the firmware tables fixed. Suggested-by:
Pierre Gondois <Pierre.Gondois@arm.com> Reviewed-by:
-
- 22 Jan, 2024 6 commits
-
-
Cristian Marussi authored
Rollback currently supported SCMI clock protocol version to v2.0 since some of the mandatory v3.0 features are indeed still not supported yet. Fixes: b5efc28a ("firmware: arm_scmi: Add protocol versioning checks") Signed-off-by:
-
Cristian Marussi authored
The clock protocol version as per the SCMI v3.2 specification is 0x30000. Enable the v3.0 clock protocol features only when clock protocol version equals 0x30000. The previous beta version of the spec had this value set to 0x20001 and th same value trickled down from the initial development. The version update were missed in the driver. Fixes: e49e314a ("firmware: arm_scmi: Add clock v3.2 CONFIG_SET support") Signed-off-by:
-
Cristian Marussi authored
Use xa_insert() when saving per-channel raw queues to better check for duplicates. Fixes: 7860701d ("firmware: arm_scmi: Add per-channel raw injection support") Signed-off-by:
-
Cristian Marussi authored
When storing opps by level or index use xa_insert() instead of xa_store() and add error-checking to spot bad duplicates indexes possibly wrongly provided by the platform firmware. Fixes: 31c7c139 ("firmware: arm_scmi: Add v3.2 perf level indexing mode support") Signed-off-by:
-
Tanzir Hasan authored
linux/bug.h includes asm-generic/bug.h already and hence replacing asm-generic/bug.h with linux/bug.h will not regress any build. Also, it is always better to avoid header file inclusion from asm-generic if possible. Suggested-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Tanzir Hasan <tanzirh@google.com> Link: https://lore.kernel.org/r/20231226-shmem-v1-1-ea15ce81d8ba@google.comSigned-off-by:
-
Cristian Marussi authored
On reception of a completion interrupt the shared memory area is accessed to retrieve the message header at first and then, if the message sequence number identifies a transaction which is still pending, the related payload is fetched too. When an SCMI command times out the channel ownership remains with the platform until eventually a late reply is received and, as a consequence, any further transmission attempt remains pending, waiting for the channel to be relinquished by the platform. Once that late reply is received the channel ownership is given back to the agent and any pending request is then allowed to proceed and overwrite the SMT area of the just delivered late reply; then the wait for the reply to the new request starts. It has been observed that the spurious IRQ related to the late reply can be wrongly associated with the freshly enqueued request: when that happens the SCMI stack in-flight lookup procedure is fooled by the fact that the message header now present in the SMT area is related to the new pending transaction, even though the real reply has still to arrive. This race-condition on the A2P channel can be detected by looking at the channel status bits: a genuine reply from the platform will have set the channel free bit before triggering the completion IRQ. Add a consistency check to validate such condition in the A2P ISR. Reported-by:
Xinglong Yang <xinglong.yang@cixtech.com> Closes: https://lore.kernel.org/all/PUZPR06MB54981E6FA00D82BFDBB864FBF08DA@PUZPR06MB5498.apcprd06.prod.outlook.com/ Fixes: 5c8a47a5 ("firmware: arm_scmi: Make scmi core independent of the transport type") Cc: stable@vger.kernel.org # 5.15+ Signed-off-by:
-
- 21 Jan, 2024 12 commits
-
-
Linus Torvalds authored
-
https://evilpiepirate.org/git/bcachefsLinus Torvalds authored
Pull more bcachefs updates from Kent Overstreet: "Some fixes, Some refactoring, some minor features: - Assorted prep work for disk space accounting rewrite - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this makes our trigger context more explicit - A few fixes to avoid excessive transaction restarts on multithreaded workloads: fstests (in addition to ktest tests) are now checking slowpath counters, and that's shaking out a few bugs - Assorted tracepoint improvements - Starting to break up bcachefs_format.h and move on disk types so they're with the code they belong to; this will make room to start documenting the on disk format better. - A few minor fixes" * tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits) bcachefs: Improve inode_to_text() bcachefs: logged_ops_format.h bcachefs: reflink_format.h bcachefs; extents_format.h bcachefs: ec_format.h bcachefs: subvolume_format.h bcachefs: snapshot_format.h bcachefs: alloc_background_format.h bcachefs: xattr_format.h bcachefs: dirent_format.h bcachefs: inode_format.h bcachefs; quota_format.h bcachefs: sb-counters_format.h bcachefs: counters.c -> sb-counters.c bcachefs: comment bch_subvolume bcachefs: bch_snapshot::btime bcachefs: add missing __GFP_NOWARN bcachefs: opts->compression can now also be applied in the background bcachefs: Prep work for variable size btree node buffers bcachefs: grab s_umount only if snapshotting ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer updates from Thomas Gleixner: "Updates for time and clocksources: - A fix for the idle and iowait time accounting vs CPU hotplug. The time is reset on CPU hotplug which makes the accumulated systemwide time jump backwards. - Assorted fixes and improvements for clocksource/event drivers" * tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug clocksource/drivers/ep93xx: Fix error handling during probe clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings clocksource/timer-riscv: Add riscv_clock_shutdown callback dt-bindings: timer: Add StarFive JH8100 clint dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs -
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Aneesh Kumar: - Increase default stack size to 32KB for Book3S Thanks to Michael Ellerman. * tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Increase default stack size to 32KB
-
Kent Overstreet authored
Add line breaks - inode_to_text() is now much easier to read. Signed-off-by:Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by:
-
