- 05 Oct, 2014 40 commits
-
-
Nishanth Menon authored
commit 20411dad upstream. Check for valid parameters in check rate. Else, we end up getting errors. This occurs as part of the inital clock tree update of child clock nodes where new_rate could be 0 for non functional clocks. Fixes: 9ac33b0c (" CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)") Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Tero Kristo <t-kristo@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Viresh Kumar authored
commit b1b12bab upstream. Commit 8e30444e ("cpufreq: fix cpufreq suspend/resume for intel_pstate") introduced a bug where the governors wouldn't be stopped anymore for ->target{_index}() drivers during suspend. This happens because 'cpufreq_suspended' is updated before stopping the governors during suspend and due to this __cpufreq_governor() would return early due to this check: /* Don't start any governor operations if we are entering suspend */ if (cpufreq_suspended) return 0; Fixes: 8e30444e ("cpufreq: fix cpufreq suspend/resume for intel_pstate") Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Dan Carpenter authored
commit d97a86c1 upstream. The lvip[] array has "state->limit" elements so the condition here should be >= instead of >. Fixes: 6ceea22b ('partitions: add aix lvm partition support files') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Philippe De Muyter <phdm@macqel.be> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Andy Shevchenko authored
commit dd8ecfca upstream. Accordingly to discussion [1] and followed up documentation the DMA controller driver shouldn't start any DMA operations when dmaengine_submit() is called. This patch fixes the workflow in dw_dmac driver to follow the documentation. [1] http://www.spinics.net/lists/arm-kernel/msg125987.htmlSigned-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Cc: "Petallo, MauriceX R" <mauricex.r.petallo@intel.com> Signed-off-by:
-
Andy Shevchenko authored
commit e7637c6c upstream. We have a duplicate code which starts first descriptor in the queue. Let's make this as a separate helper that can be used in future as well. Signed-off-by:
-
Ulf Hansson authored
commit 7878289b upstream. Commit "mmc: mmci: Handle CMD irq before DATA irq", caused an issue when using the ARM model of the PL181 and running QEMU. The bug was reported for the following QEMU version: $ qemu-system-arm -version QEMU emulator version 2.0.0 (Debian 2.0.0+dfsg-2ubuntu1.1), Copyright (c) 2003-2008 Fabrice Bellard To resolve the problem, let's restore the old behavior were the DATA irq is handled prior the CMD irq, but only for the arm_variant, which the problem was reported for. Reported-by:
John Stultz <john.stultz@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Tested-by:
Kees Cook <keescook@chromium.org> Tested-by:
Ulf Hansson <ulf.hansson@linaro.org> [kees: backported to 3.16] Signed-off-by:
-
Pablo Neira Ayuso authored
commit b88825de upstream. Fix possible replacement of the per-cpu chain counters by null pointer when updating an existing chain in the commit path. Reported-by:
Matteo Croce <technoboy85@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Julian Anastasov authored
commit eb90b0c7 upstream. commit fc604767 ("ipvs: changes for local real server") from 2.6.37 introduced DNAT support to local real server but the IPv6 LOCAL_OUT handler ip_vs_local_reply6() is registered incorrectly as IPv4 hook causing any outgoing IPv4 traffic to be dropped depending on the IP header values. Chris tracked down the problem to CONFIG_IP_VS_IPV6=y Bug report: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1349768Reported-by:
Chris J Arges <chris.j.arges@canonical.com> Tested-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Daniel Borkmann authored
commit caa8ad94 upstream. There's actually no good reason why we cannot use cgroup id 0, so lets just remove this artificial barrier. Reported-by:
Alexey Perevalov <a.perevalov@samsung.com> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Tested-by:
-
Alex Gartrell authored
commit 76f084bc upstream. Previously, only the four high bits of the tclass were maintained in the ipv6 case. This matches the behavior of ipv4, though whether or not we should reflect ECN bits may be up for debate. Signed-off-by:
Alex Gartrell <agartrell@fb.com> Acked-by:
-
Eric Dumazet authored
commit 7bd8490e upstream. xt_hashlimit cannot be used with large hash tables, because garbage collector is run from a timer. If table is really big, its possible to hold cpu for more than 500 msec, which is unacceptable. Switch to a work queue, and use proper scheduling points to remove latencies spikes. Later, we also could switch to a smoother garbage collection done at lookup time, one bucket at a time... Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Patrick McHardy <kaber@trash.net> Reviewed-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
NeilBrown authored
commit f0cc9a05 upstream. r1_bio->start_next_window is not initialised in the READ case, so allow_barrier may incorrectly decrement conf->current_window_requests which can cause raise_barrier() to block forever. Fixes: 79ef3a8aReported-by:
Brassow Jonathan <jbrassow@redhat.com> Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
commit b8cb6b4c upstream. If a devices is being recovered it is not InSync and is not Faulty. If a read error is experienced on that device, fix_read_error() will be called, but it ignores non-InSync devices. So it will neither fix the error nor fail the device. It is incorrect that fix_read_error() ignores non-InSync devices. It should only ignore Faulty devices. So fix it. This became a bug when we allowed reading from a device that was being recovered. It is suitable for any subsequent -stable kernel. Fixes: da8840a7Reported-by:
Alexander Lyakas <alex.bolshoy@gmail.com> Tested-by:
-
NeilBrown authored
commit 34e97f17 upstream. Both normal IO and resync IO can be retried with reschedule_retry() and so be counted into ->nr_queued, but only normal IO gets counted in ->nr_pending. Before the recent improvement to RAID1 resync there could only possibly have been one or the other on the queue. When handling a read failure it could only be normal IO. So when handle_read_error() called freeze_array() the fact that freeze_array only compares ->nr_queued against ->nr_pending was safe. But now that these two types can interleave, we can have both normal and resync IO requests queued, so we need to count them both in nr_pending. This error can lead to freeze_array() hanging if there is a read error, so it is suitable for -stable. Fixes: 79ef3a8aReported-by:
-
NeilBrown authored
commit c2fd4c94 upstream. raise_barrier() uses next_resync as part of its calculations, so it really should be updated first, instead of afterwards. next_resync is always used under resync_lock so update it under resync lock to, just before it is used. That is safest. This could cause normal IO and resync IO to interact badly so it suitable for -stable. Fixes: 79ef3a8aSigned-off-by:
-
NeilBrown authored
commit 23554960 upstream. next_resync is (approximately) the location for the next resync request. However it does *not* reliably determine the earliest location at which resync might be happening. This is because resync requests can complete out of order, and we only limit the number of current requests, not the distance from the earliest pending request to the latest. mddev->curr_resync_completed is a reliable indicator of the earliest position at which resync could be happening. It is updated less frequently, but is actually reliable which is more important. So use it to determine if a write request is before the region being resynced and so safe from conflict. This error can allow resync IO to interfere with normal IO which could lead to data corruption. Hence: stable. Fixes: 79ef3a8aSigned-off-by:
-
NeilBrown authored
commit 2f73d3c5 upstream. The resync/recovery process for raid1 was recently changed so that writes could happen in parallel with resync providing they were in different regions of the device. There is a problem though: While a write request will always wait for conflicting resync to complete, a resync request will *not* always wait for conflicting writes to complete. Two changes are needed to fix this: 1/ raise_barrier (which waits until it is safe to do resync) must wait until current_window_requests is zero 2/ wait_battier (which waits at the start of a new write request) must update current_window_requests if the request could possible conflict with a concurrent resync. As concurrent writes and resync can lead to data loss, this patch is suitable for -stable. Fixes: 79ef3a8a Cc: majianpeng <majianpeng@gmail.com> Signed-off-by:
-
NeilBrown authored
commit c6d119cf upstream. commit 79ef3a8a made it possible for reads to happen concurrently with resync. This means that we need to be more careful where read_balancing is allowed during resync - we can no longer be sure that any resync that has already started will definitely finish. So keep read_balancing to before recovery_cp, which is conservative but safe. This bug makes it possible to read from a device that doesn't have up-to-date data, so it can cause data corruption. So it is suitable for any kernel since 3.11. Fixes: 79ef3a8aSigned-off-by:
-
NeilBrown authored
commit 669cc7ba upstream. If there are outstanding writes when close_sync is called, the change to ->start_next_window might cause them to decrement the wrong counter when they complete. Fix this by merging the two counters into the one that will be decremented. Having an incorrect value in a counter can cause raise_barrier() to hangs, so this is suitable for -stable. Fixes: 79ef3a8aSigned-off-by:
-
Zhaowei Yuan authored
commit a9ae4692 upstream. It's also invalid when plane_no is equal to vb->num_planes Signed-off-by:
Zhaowei Yuan <zhaowei.yuan@samsung.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Hans Verkuil authored
commit bf3593d9 upstream. Commit bd994ddb (vb2: Fix stream start and buffer completion race) broke the buffer state check in vb2_buffer_done. So accept all three possible states there since I can no longer tell the difference between vb2_buffer_done called from start_streaming or from elsewhere. Instead add a WARN_ON at the end of start_streaming that will check whether any buffers were added to the done list, since that implies that the wrong state was used as well. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Hans Verkuil authored
commit 47bc59c5 upstream. sg_alloc_table_from_pages() only allocates a sg_table, so it should just use GFP_KERNEL, not gfp_flags. If gfp_flags contains __GFP_DMA32 then mm/sl[au]b.c will call BUG_ON: [ 358.027515] ------------[ cut here ]------------ [ 358.027546] kernel BUG at mm/slub.c:1416! [ 358.027558] invalid opcode: 0000 [#1] PREEMPT SMP [ 358.027576] Modules linked in: mt2131 s5h1409 tda8290 tuner cx25840 cx23885 btcx_risc altera_ci tda18271 altera_stapl videobuf2_dvb tveeprom cx2341x videobuf2_dma_sg dvb_core rc_core videobuf2_memops videobuf2_core nouveau zr36067 videocodec v4l2_common videodev media x86_pkg_temp_thermal cfbfillrect cfbimgblt cfbcopyarea ttm drm_kms_helper processor button isci [ 358.027712] CPU: 19 PID: 3654 Comm: cat Not tainted 3.16.0-rc6-telek #167 [ 358.027723] Hardware name: ASUSTeK COMPUTER INC. Z9PE-D8 WS/Z9PE-D8 WS, BIOS 5404 02/10/2014 [ 358.027741] task: ffff880897c7d960 ti: ffff88089b4d4000 task.ti: ffff88089b4d4000 [ 358.027753] RIP: 0010:[<ffffffff81196040>] [<ffffffff81196040>] new_slab+0x280/0x320 [ 358.027776] RSP: 0018:ffff88089b4d7ae8 EFLAGS: 00010002 [ 358.027787] RAX: ffff880897c7d960 RBX: 0000000000000000 RCX: ffff88089b4d7b50 [ 358.027798] RDX: 00000000ffffffff RSI: 0000000000000004 RDI: ffff88089f803b00 [ 358.027809] RBP: ffff88089b4d7bb8 R08: 0000000000000000 R09: 0000000100400040 [ 358.027821] R10: 0000160000000000 R11: ffff88109bc02c40 R12: 0000000000000001 [ 358.027832] R13: ffff88089f8000c0 R14: ffff88089f803b00 R15: ffff8810bfcf4be0 [ 358.027845] FS: 00007f83fe5c0700(0000) GS:ffff8810bfce0000(0000) knlGS:0000000000000000 [ 358.027858] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 358.027868] CR2: 0000000001dfd568 CR3: 0000001097d5a000 CR4: 00000000000407e0 [ 358.027878] Stack: [ 358.027885] ffffffff81198860 ffff8810bfcf4be0 ffff880897c7d960 0000000000001b00 [ 358.027905] ffff880897c7d960 0000000000000000 ffff8810bfcf4bf0 0000000000000000 [ 358.027924] 0000000000000000 0000000100000100 ffffffff813ef84a 00000004ffffffff [ 358.027944] Call Trace: [ 358.027956] [<ffffffff81198860>] ? __slab_alloc+0x400/0x4e0 [ 358.027973] [<ffffffff813ef84a>] ? sg_kmalloc+0x1a/0x30 [ 358.027985] [<ffffffff81198f17>] __kmalloc+0x127/0x150 [ 358.027997] [<ffffffff813ef84a>] ? sg_kmalloc+0x1a/0x30 [ 358.028009] [<ffffffff813ef84a>] sg_kmalloc+0x1a/0x30 [ 358.028023] [<ffffffff813eff84>] __sg_alloc_table+0x74/0x180 [ 358.028035] [<ffffffff813ef830>] ? sg_kfree+0x20/0x20 [ 358.028048] [<ffffffff813f00af>] sg_alloc_table+0x1f/0x60 [ 358.028061] [<ffffffff813f0174>] sg_alloc_table_from_pages+0x84/0x1f0 [ 358.028077] [<ffffffffa007c3f9>] vb2_dma_sg_alloc+0x159/0x230 [videobuf2_dma_sg] [ 358.028095] [<ffffffffa003d55a>] __vb2_queue_alloc+0x10a/0x680 [videobuf2_core] [ 358.028113] [<ffffffffa003e110>] __reqbufs.isra.14+0x220/0x3e0 [videobuf2_core] [ 358.028130] [<ffffffffa003e79d>] __vb2_init_fileio+0xbd/0x380 [videobuf2_core] [ 358.028147] [<ffffffffa003f563>] __vb2_perform_fileio+0x5b3/0x6e0 [videobuf2_core] [ 358.028164] [<ffffffffa003f871>] vb2_fop_read+0xb1/0x100 [videobuf2_core] [ 358.028184] [<ffffffffa06dd2e5>] v4l2_read+0x65/0xb0 [videodev] [ 358.028198] [<ffffffff811a243f>] vfs_read+0x8f/0x170 [ 358.028210] [<ffffffff811a30a1>] SyS_read+0x41/0xb0 [ 358.028224] [<ffffffff818f02e9>] system_call_fastpath+0x16/0x1b [ 358.028234] Code: 66 90 e9 dc fd ff ff 0f 1f 40 00 41 8b 4d 68 e9 d5 fe ff ff 0f 1f 80 00 00 00 00 f0 41 80 4d 00 40 e9 03 ff ff ff 0f 1f 44 00 00 <0f> 0b 66 0f 1f 44 00 00 44 89 c6 4c 89 45 d0 e8 0c 82 ff ff 48 [ 358.028415] RIP [<ffffffff81196040>] new_slab+0x280/0x320 [ 358.028432] RSP <ffff88089b4d7ae8> [ 358.032208] ---[ end trace 6443240199c706e4 ]--- Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit c7854c2c upstream. When both VBI and video are streaming, and video stream is stopped, a subsequent trial to restart it will fail, because S_FMT will return -EBUSY. That prevents applications like zvbi to work properly. Please notice that, while this fix it fully for zvbi, the best is to get rid of streaming_users and res_get logic as a hole. However, this single-line patch is better to be merged at -stable. Signed-off-by:
-
Hans Verkuil authored
commit 77639ff2 upstream. The log_status function should show HDMI information, but the test checking for an HDMI input was inverted. Fix this. Signed-off-by:
-
Bimow Chen authored
commit 0df6580c upstream. Update IT9135 BX tuner config 60 and 61 inittabs. [crope@iki.fi: removed two reg writes from driver init itself] Signed-off-by:
Bimow Chen <Bimow.Chen@ite.com.tw> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Hans Verkuil authored
commit 6a03dc92 upstream. This was caused by an uninitialized setup.config field. Based on a suggestion from Devin Heitmueller. Signed-off-by:
Scott Robinson <scott.robinson55@gmail.com> Tested-by:
-
Antti Palosaari authored
commit 9dc0f3fe upstream. IT9135 RF tuner clock is coming from demodulator. We need enable it early in demod init, before any tuner I/O. Currently it is enabled by tuner driver itself, but it is too late and performance will be reduced as some registers are not updated correctly. Clock is disabled automatically when demod is put onto sleep. Cc: Bimow Chen <Bimow.Chen@ite.com.tw> Signed-off-by:
-
Malcolm Priestley authored
commit a04646c0 upstream. add the following IDs USB_PID_PCTV_78E (0x025a) for PCTV 78e USB_PID_PCTV_79E (0x0262) for PCTV 79e For these it9135 devices. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Bimow Chen authored
commit 01b461bb upstream. That register is needed to program very first in order to operate correctly. [crope@iki.fi: returned sequence back, removed sleep, moved reg write earlier to prevent populating tuner ops in case of failure] Signed-off-by:
-
Lan Tianyu authored
commit 8e30444e upstream. Cpufreq core introduces cpufreq_suspended flag to let cpufreq sysfs nodes across S2RAM/S2DISK. But the flag is only set in the cpufreq_suspend() for cpufreq drivers which have target or target_index callback. This skips intel_pstate driver. This patch is to set the flag before checking target or target_index callback. Fixes: 2f0aea93 (cpufreq: suspend governors on system suspend/hibernate) Signed-off-by:
Lan Tianyu <tianyu.lan@intel.com> [rjw: Subject] Signed-off-by:
-
Prarit Bhargava authored
commit 7106e02b upstream. While debugging a cpufreq-related hardware failure on a system I saw the following lockdep warning: ========================= [ BUG: held lock freed! ] 3.17.0-rc4+ #1 Tainted: G E ------------------------- insmod/2247 is freeing memory ffff88006e1b1400-ffff88006e1b17ff, with a lock still held there! (&policy->rwsem){+.+...}, at: [<ffffffff8156d37d>] __cpufreq_add_dev.isra.21+0x47d/0xb80 3 locks held by insmod/2247: #0: (subsys mutex#5){+.+.+.}, at: [<ffffffff81485579>] subsys_interface_register+0x69/0x120 #1: (cpufreq_rwsem){.+.+.+}, at: [<ffffffff8156cf73>] __cpufreq_add_dev.isra.21+0x73/0xb80 #2: (&policy->rwsem){+.+...}, at: [<ffffffff8156d37d>] __cpufreq_add_dev.isra.21+0x47d/0xb80 stack backtrace: CPU: 0 PID: 2247 Comm: insmod Tainted: G E 3.17.0-rc4+ #1 Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 08/24/2013 0000000000000000 000000008f3063c4 ffff88006f87bb30 ffffffff8171b358 ffff88006bcf3750 ffff88006f87bb68 ffffffff810e09e1 ffff88006e1b1400 ffffea0001b86c00 ffffffff8156d327 ffff880073003500 0000000000000246 Call Trace: [<ffffffff8171b358>] dump_stack+0x4d/0x66 [<ffffffff810e09e1>] debug_check_no_locks_freed+0x171/0x180 [<ffffffff8156d327>] ? __cpufreq_add_dev.isra.21+0x427/0xb80 [<ffffffff8121412b>] kfree+0xab/0x2b0 [<ffffffff8156d327>] __cpufreq_add_dev.isra.21+0x427/0xb80 [<ffffffff81724cf7>] ? _raw_spin_unlock+0x27/0x40 [<ffffffffa003517f>] ? pcc_cpufreq_do_osc+0x17f/0x17f [pcc_cpufreq] [<ffffffff8156da8e>] cpufreq_add_dev+0xe/0x10 [<ffffffff814855d1>] subsys_interface_register+0xc1/0x120 [<ffffffff8156bcf2>] cpufreq_register_driver+0x112/0x340 [<ffffffff8121415a>] ? kfree+0xda/0x2b0 [<ffffffffa003517f>] ? pcc_cpufreq_do_osc+0x17f/0x17f [pcc_cpufreq] [<ffffffffa003562e>] pcc_cpufreq_init+0x4af/0xe81 [pcc_cpufreq] [<ffffffffa003517f>] ? pcc_cpufreq_do_osc+0x17f/0x17f [pcc_cpufreq] [<ffffffff81002144>] do_one_initcall+0xd4/0x210 [<ffffffff811f7472>] ? __vunmap+0xd2/0x120 [<ffffffff81127155>] load_module+0x1315/0x1b70 [<ffffffff811222a0>] ? store_uevent+0x70/0x70 [<ffffffff811229d9>] ? copy_module_from_fd.isra.44+0x129/0x180 [<ffffffff81127b86>] SyS_finit_module+0xa6/0xd0 [<ffffffff81725b69>] system_call_fastpath+0x16/0x1b cpufreq: __cpufreq_add_dev: ->get() failed insmod: ERROR: could not insert module pcc-cpufreq.ko: No such device The warning occurs in the __cpufreq_add_dev() code which does down_write(&policy->rwsem); ... if (cpufreq_driver->get && !cpufreq_driver->setpolicy) { policy->cur = cpufreq_driver->get(policy->cpu); if (!policy->cur) { pr_err("%s: ->get() failed\n", __func__); goto err_get_freq; } If cpufreq_driver->get(policy->cpu) returns an error we execute the code at err_get_freq, which does not up the policy->rwsem. This causes the lockdep warning. Trivial patch to up the policy->rwsem in the error path. After the patch has been applied, and an error occurs in the cpufreq_driver->get(policy->cpu) call we will now see cpufreq: __cpufreq_add_dev: ->get() failed cpufreq: __cpufreq_add_dev: ->get() failed modprobe: ERROR: could not insert 'pcc_cpufreq': No such device Fixes: 4e97b631 (cpufreq: Initialize governor for a new policy under policy->rwsem) Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Acked-by:
-
Bjorn Helgaas authored
commit 12d87069 upstream. This reverts commit 1820ffdc ("PCI: Make sure bus number resources stay within their parents bounds") because it breaks some systems with LSI Logic FC949ES Fibre Channel Adapters, apparently by exposing a defect in those adapters. Dirk tested a Tyan VX50 (B4985) with this device that worked like this prior to 1820ffdc: bus: [bus 00-7f] on node 0 link 1 ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-07]) pci 0000:00:0e.0: PCI bridge to [bus 0a] pci_bus 0000:0a: busn_res: can not insert [bus 0a] under [bus 00-07] (conflicts with (null) [bus 00-07]) pci 0000:0a:00.0: [1000:0646] type 00 class 0x0c0400 (FC adapter) Note that the root bridge [bus 00-07] aperture is wrong; this is a BIOS defect in the PCI0 _CRS method. But prior to 1820ffdc, we didn't enforce that aperture, and the FC adapter worked fine at 0a:00.0. After 1820ffdc, we notice that 00:0e.0's aperture is not contained in the root bridge's aperture, so we reconfigure it so it *is* contained: pci 0000:00:0e.0: bridge configuration invalid ([bus 0a-0a]), reconfiguring pci 0000:00:0e.0: PCI bridge to [bus 06-07] This effectively moves the FC device from 0a:00.0 to 07:00.0, which should be legal. But when we enumerate bus 06, the FC device doesn't respond, so we don't find anything. This is probably a defect in the FC device. Possible fixes (due to Yinghai): 1) Add a quirk to fix the _CRS information based on what amd_bus.c read from the hardware 2) Reset the FC device after we change its bus number 3) Revert 1820ffdc Fix 1 would be relatively easy, but it does sweep the LSI FC issue under the rug. We might want to reconfigure bus numbers in the future for some other reason, e.g., hotplug, and then we could trip over this again. For that reason, I like fix 2, but we don't know whether it actually works, and we don't have a patch for it yet. This revert is fix 3, which also sweeps the LSI FC issue under the rug. Link: https://bugzilla.kernel.org/show_bug.cgi?id=84281Reported-by:
Dirk Gouders <dirk@gouders.net> Tested-by:
Bjorn Helgaas <bhelgaas@google.com> CC: Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Johannes Berg authored
commit bd8c78e7 upstream. In testmode and vendor command reply/event SKBs we use the skb cb data to store nl80211 parameters between allocation and sending. This causes the code for CONFIG_NETLINK_MMAP to get confused, because it takes ownership of the skb cb data when the SKB is handed off to netlink, and it doesn't explicitly clear it. Clear the skb cb explicitly when we're done and before it gets passed to netlink to avoid this issue. Reported-by:
Assaf Azulay <assaf.azulay@intel.com> Reported-by:
David Spinadel <david.spinadel@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Tom Lendacky authored
commit c9f21cb6 upstream. If the ccp is built as a built-in module, then ccp-crypto (whether built as a module or a built-in module) will be able to load and it will register its crypto algorithms. If the system does not have a CCP this will result in -ENODEV being returned whenever a command is attempted to be queued by the registered crypto algorithms. Add an API, ccp_present(), that checks for the presence of a CCP on the system. The ccp-crypto module can use this to determine if it should register it's crypto alogorithms. Reported-by:
Scot Doyle <lkml14@scotdoyle.com> Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Tested-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
David Hildenbrand authored
commit 683d0e12 upstream. This patch should fix the bug reported in https://lkml.org/lkml/2014/9/11/249. We have to initialize at least the atomic_flags and the cmd_flags when allocating storage for the requests. Otherwise blk_mq_timeout_check() might dereference uninitialized pointers when racing with the creation of a request. Also move the reset of cmd_flags for the initializing code to the point where a request is freed. So we will never end up with pending flush request indicators that might trigger dereferences of invalid pointers in blk_mq_timeout_check(). Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Reported-by:
Paulo De Rezende Pinatti <ppinatti@linux.vnet.ibm.com> Tested-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Anton Altaparmakov authored
commit f2d5a944 upstream. On 32-bit architectures, the legacy buffer_head functions are not always handling the sector number with the proper 64-bit types, and will thus fail on 4TB+ disks. Any code that uses __getblk() (and thus bread(), breadahead(), sb_bread(), sb_breadahead(), sb_getblk()), and calls it using a 64-bit block on a 32-bit arch (where "long" is 32-bit) causes an inifinite loop in __getblk_slow() with an infinite stream of errors logged to dmesg like this: __find_get_block_slow() failed. block=6740375944, b_blocknr=2445408648 b_state=0x00000020, b_size=512 device sda1 blocksize: 512 Note how in hex block is 0x191C1F988 and b_blocknr is 0x91C1F988 i.e. the top 32-bits are missing (in this case the 0x1 at the top). This is because grow_dev_page() is broken and has a 32-bit overflow due to shifting the page index value (a pgoff_t - which is just 32 bits on 32-bit architectures) left-shifted as the block number. But the top bits to get lost as the pgoff_t is not type cast to sector_t / 64-bit before the shift. This patch fixes this issue by type casting "index" to sector_t before doing the left shift. Note this is not a theoretical bug but has been seen in the field on a 4TiB hard drive with logical sector size 512 bytes. This patch has been verified to fix the infinite loop problem on 3.17-rc5 kernel using a 4TB disk image mounted using "-o loop". Without this patch doing a "find /nt" where /nt is an NTFS volume causes the inifinite loop 100% reproducibly whilst with the patch it works fine as expected. Signed-off-by:
Anton Altaparmakov <aia21@cantab.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Alex Deucher authored
commit 2e97140d upstream. Use the new vga_switcheroo_fini_domain_pm_ops function to unregister the pm ops. Based on a patch from: Pali Rohár <pali.rohar@gmail.com> bug: https://bugzilla.kernel.org/show_bug.cgi?id=84431Reviewed-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit 53beaa01 upstream. Use the new vga_switcheroo_fini_domain_pm_ops function to unregister the pm ops. Based on a patch from: Pali Rohár <pali.rohar@gmail.com> bug: https://bugzilla.kernel.org/show_bug.cgi?id=84431Reviewed-by:
-
Alex Deucher authored
commit 766a53d0 upstream. Drivers should call this on unload to unregister pmops. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=84431Reviewed-by:
-
Bjorn Helgaas authored
commit 7a0b33d4 upstream. This reverts commit fc1b2531 ("PCI: Don't scan random busses in pci_scan_bridge()") because it breaks CardBus on some machines. David tested a Dell Latitude D505 that worked like this prior to fc1b2531: pci 0000:00:1e.0: PCI bridge to [bus 01] pci 0000:01:01.0: CardBus bridge to [bus 02-05] Note that the 01:01.0 CardBus bridge has a bus number aperture of [bus 02-05], but those buses are all outside the 00:1e.0 PCI bridge bus number aperture, so accesses to buses 02-05 never reach CardBus. This is later patched up by yenta_fixup_parent_bridge(), which changes the subordinate bus number of the 00:1e.0 PCI bridge: pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #01 to #05 With fc1b2531, pci_scan_bridge() fails immediately when it notices that we can't allocate a valid secondary bus number for the CardBus bridge, and CardBus doesn't work at all: pci 0000:01:01.0: can't allocate child bus 01 from [bus 01] I'd prefer to fix this by integrating the yenta_fixup_parent_bridge() logic into pci_scan_bridge() so we fix the bus number apertures up front. But I don't think we can do that before v3.17, so I'm going to revert this to avoid the problem while we're working on the long-term fix. Link: https://bugzilla.kernel.org/show_bug.cgi?id=83441 Link: http://lkml.kernel.org/r/1409303414-5196-1-git-send-email-david.henningsson@canonical.comReported-by:
David Henningsson <david.henningsson@canonical.com> Tested-by:
-
