- 06 Sep, 2020 1 commit
-
-
Hans de Goede authored
The DSDTs on most Cherry Trail devices have an ugly clutch where the PWM controller gets poked from the _PS0 method of the graphics-card device: Local0 = PSAT /* \_SB_.PCI0.GFX0.PSAT */ If (((Local0 & 0x03) == 0x03)) { PSAT &= 0xFFFFFFFC Local1 = PSAT /* \_SB_.PCI0.GFX0.PSAT */ RSTA = Zero RSTF = Zero RSTA = One RSTF = One PWMB |= 0xC0000000 PWMC = PWMB /* \_SB_.PCI0.GFX0.PWMB */ } Where PSAT is the power-status register of the PWM controller, so if it is in D3 when the GFX0 device's PS0 method runs then it will turn it on and restore the PWM ctrl register value it saved from its PS3 handler. Note not only does it restore it, it ors it with 0xC0000000 turning it on at a time where we may not want it to get turned on at all. The pwm_get call which the i915 driver does to get a reference to the PWM controller, already adds a device-link making the GFX0 device a consumer of the PWM device. So it should already have been resumed when the above AML runs and the AML should thus not do its undesirable poking of the PWM controller register. But the PCI core powers on PCI devices in the no-irq resume phase and thus calls the troublesome PS0 method in the no-irq resume phase. Where as LPSS devices by default are resumed in the early resume phase. This commit sets the resume_from_noirq flag in the bsw_pwm_dev_desc struct, so that Cherry Trail PWM controllers will be resumed in the no-irq phase. Together with the device-link added by the pwm-get this ensures that the PWM controller will be on when the troublesome PS0 method runs, which stops it from poking the PWM controller. Acked-by:Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-2-hdegoede@redhat.com
-
- 04 Sep, 2020 4 commits
-
-
Jani Nikula authored
Streamline the modeset init by removing the extra init layer. No functional changes, which means the cleanup path looks hideous. Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/62c32c35683b843ecdc2eca2bd2d3e62cb705e96.1599056955.git.jani.nikula@intel.com
-
Jani Nikula authored
Split out a separate display function for driver remove after gem deinitialization. Note that the sequence is not symmetric with init. However use similar naming as that reflects the deinit sequence. No functional changes. Reviewed-by:
-
Jani Nikula authored
With the intel_modeset_* probe functions clarified, we can continue with moving more related calls to the right layer: - drm_vblank_init() - intel_bios_init() - intel_vga_register() - intel_csr_ucode_init() Unfortunately, for the time being, we also need to move a call to the *wrong* layer: the power domain init. No functional changes. v2: move probe failure while at it, power domain init Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Turn current intel_modeset_init() to a pre-gem init function, and add a new intel_modeset_init() function and move all post-gem modeset init there, in the correct layer. No functional changes. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
- 03 Sep, 2020 1 commit
-
-
Kai Vehmanen authored
In commit 4f0b4352 ("drm/i915: Extract cdclk requirements checking to separate function") the order of force_min_cdclk_changed check and intel_modeset_checks(), was reversed. This broke the mechanism to immediately force a new CDCLK minimum, and lead to driver probe errors for display audio on GLK platform with 5.9-rc1 kernel. Fix the issue by moving intel_modeset_checks() call later. [vsyrjala: It also broke the ability of planes to bump up the cdclk and thus could lead to underruns when eg. flipping from 32bpp to 64bpp framebuffer. To be clear, we still compute the new cdclk correctly but fail to actually program it to the hardware due to intel_set_cdclk_{pre,post}_plane_update() not getting called on account of state->modeset==false.] Fixes: 4f0b4352 ("drm/i915: Extract cdclk requirements checking to separate function") BugLink: https://github.com/thesofproject/linux/issues/2410Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
-
- 01 Sep, 2020 17 commits
-
-
Sean Paul authored
Now that all the groundwork has been laid, we can turn on HDCP 1.4 over MST. Everything except for toggling the HDCP signalling and HDCP 2.2 support is the same as the DP case, so we'll re-use those callbacks Cc: Juston Li <juston.li@intel.com> Reviewed-by:
Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191203173638.94919-12-sean@poorly.run #v1 Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-13-sean@poorly.run #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-13-sean@poorly.run #v3 Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-15-sean@poorly.run #v4 Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-17-sean@poorly.run #v5 Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-17-sean@poorly.run #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-18-sean@poorly.run #v7 Changes in v2: -Toggle HDCP from encoder disable/enable -Don't disable HDCP on MST connector destroy, leave that for encoder disable, just ensure the check_work routine isn't running any longer Changes in v3: -Place the shim in the new intel_dp_hdcp.c file (Ville) Changes in v4: -Actually use the mst shim for mst connections (Juston) -Use QUERY_STREAM_ENC_STATUS MST message to verify channel is encrypted Changes in v5: -Add sleep on disable signalling to match hdmi delay Changes in v6: -Disable HDCP over MST on GEN12+ since I'm unsure how it should work and I don't have hardware to test it Changes in v7: -Remove hdcp2 shims for MST in favor of skipping hdcp2 init (Ramalingam) Changes in v8: -None Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-18-sean@poorly.run
-
Sean Paul authored
De-duplicate the HDCP version code for each connector and print it for all connectors. Cc: Juston Li <juston.li@intel.com> Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Juston Li <juston.li@intel.com> Reviewed-by:
-
Sean Paul authored
Used to query whether an MST stream is encrypted or not. Cc: Lyude Paul <lyude@redhat.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200819143133.46232-1-sean@poorly.run
-
Sean Paul authored
Currently we derive the connector from digital port in check_link(). For MST, this isn't sufficient since the digital port passed into the function can have multiple connectors downstream. This patch adds connector to the check_link() arguments so we have it when we need it. Reviewed-by:
-
Sean Paul authored
This patch plumbs port through hdcp init instead of relying on intel_attached_encoder() to return a non-NULL encoder which won't work for MST connectors. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Sean Paul authored
These functions are all the same for dp and dp_mst, so move them into a dedicated file for both sst and mst to use. Reviewed-by:
-
Sean Paul authored
In order to act upon content_protection property changes, we'll need to implement the .update_pipe() hook. We can re-use intel_ddi_update_pipe for this Reviewed-by:
-
Sean Paul authored
Although DP_MST fake encoders are not subclassed from digital ports, they are associated with them. Support these encoders. Reviewed-by:
-
Sean Paul authored
This patch is required for HDCP over MST. If a port is being used for multiple HDCP streams, we don't want to fully disable HDCP on a port if one of them is disabled. Instead, we just disable the HDCP signalling on that particular pipe and exit early. The last pipe to disable HDCP will also bring down HDCP on the port. In order to achieve this, we need to keep a refcount in intel_digital_port and protect it using a new hdcp_mutex. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
-
Sean Paul authored
Add an out label and un-indent hdcp disable in preparation for hdcp_mutex. No functional changes Reviewed-by:
-
Sean Paul authored
This patch adds some protection against connectors being destroyed before the HDCP workers are finished. For check_work, we do a synchronous cancel after the connector is unregistered which will ensure that it is finished before destruction. In the case of prop_work, we can't do a synchronous wait since it needs to take connection_mutex which could cause deadlock. Instead, we'll take a reference on the connector when scheduling prop_work and give it up once we're done. Reviewed-by:
-
Sean Paul authored
This is a bit of housecleaning for a future patch. Instead of sprinkling hdcp->value assignments and prop_work scheduling everywhere, introduce a function to do it for us. Reviewed-by:
-
Sean Paul authored
Instead of using intel_dig_port's encoder pipe to determine which transcoder to toggle signalling on, use the cpu_transcoder field already stored in intel_hdmi. This is particularly important for MST. Suggested-by:
-
Sean Paul authored
Instead of hand rolling the transfer ourselves in the hdcp hook, inspect aux messages and add the aksv flag in the aux transfer hook. IIRC, this was the original implementation and folks wanted this hack to be isolated to the hdcp code, which makes sense. However in testing an LG monitor on my desk, I noticed it was passing back a DEFER reply. This wasn't handled in our hand-rolled code and HDCP auth was failing as a result. Instead of copy/pasting all of the retry logic and delays from drm dp helpers, let's just use the helpers and hide the aksv select as best as we can. Reviewed-by:
-
Sean Paul authored
HDCP signalling should not be left on, WARN if it is Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Sean Paul authored
On HDCP disable, clear the repeater bit. This ensures if we connect a non-repeater sink after a repeater, the bit is in the state we expect. Fixes: ee5e5e7a ("drm/i915: Add HDCP framework + base implementation") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.17+ Reviewed-by:
-
Sean Paul authored
This patch fixes a few bugs: 1- We weren't taking into account sha_leftovers when adding multiple ksvs to sha_text. As such, we were or'ing the end of ksv[j - 1] with the beginning of ksv[j] 2- In the sha_leftovers == 2 and sha_leftovers == 3 case, bstatus was being placed on the wrong half of sha_text, overlapping the leftover ksv value 3- In the sha_leftovers == 2 case, we need to manually terminate the byte stream with 0x80 since the hardware doesn't have enough room to add it after writing M0 The upside is that all of the HDCP supported HDMI repeaters I could find on Amazon just strip HDCP anyways, so it turns out to be _really_ hard to hit any of these cases without an MST hub, which is not (yet) supported. Oh, and the sha_leftovers == 1 case works perfectly! Fixes: ee5e5e7a ("drm/i915: Add HDCP framework + base implementation") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.17+ Reviewed-by:
-
- 31 Aug, 2020 1 commit
-
-
Lionel Landwerlin authored
I'll need this in IGT to identify the different kind of GTs and apply the right performance query configuration. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200828133125.157171-1-lionel.g.landwerlin@intel.com
-
- 29 Aug, 2020 1 commit
-
-
Nathan Chancellor authored
Clang warns: drivers/gpu/drm/i915/display/intel_combo_phy.c:268:3: warning: variable 'ret' is uninitialized when used here [-Wuninitialized] ret &= check_phy_reg(dev_priv, phy, ICL_PORT_TX_DW8_LN0(phy), ^~~ drivers/gpu/drm/i915/display/intel_combo_phy.c:261:10: note: initialize the variable 'ret' to silence this warning bool ret; ^ = 0 1 warning generated. In practice, the bug this warning appears to be concerned with would not actually matter because ret gets initialized to the return value of cnl_verify_procmon_ref_values. However, that does appear to be a bug since it means the first hunk of the patch this fixes won't actually do anything (since the values of check_phy_reg won't factor into the final ret value). Initialize ret to true then make all of the assignments a bitwise AND with itself so that the function always does what it should do. Fixes: 239bef67 ("drm/i915/display: Implement new combo phy initialization step") Link: https://github.com/ClangBuiltLinux/linux/issues/1094Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200828202830.7165-1-jose.souza@intel.comSigned-off-by:
José Roberto de Souza <jose.souza@intel.com>
-
- 28 Aug, 2020 4 commits
-
-
José Roberto de Souza authored
Update with latest tuning in the table. v3: Fix values of to last columns. BSpec: 21257 Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
José Roberto de Souza authored
Reusing icl_get_combo_buf_trans() for eDP was causing the wrong table being used when the eDP port don't support low power voltage swing table. v2: Only use icl_combo_phy_ddi_translations_edp_hbr3 if low_vswing is set as EHL combo phy supports HBR3 (Matt R) Reviewed-by:
-
José Roberto de Souza authored
Reusing icl_get_combo_buf_trans() for eDP was causing the wrong table being used when the eDP port don't support low power voltage swing table. Reviewed-by:
-
José Roberto de Souza authored
TGL made stepping a litte mess, workarounds refer to the stepping of the IP(GT or Display) not of the GPU stepping so it would already require the same solution as used in commit 96c5a15f ("drm/i915/kbl: Fix revision ID checks"). But to make things even more messy it have a different IP stepping mapping between SKUs and the same stepping revision of GT do not match the same HW between TGL U/Y and regular TGL. So it was required to have 2 different macros to check GT WAs while for Display we are able to use just one macro that uses the right revids table. All TGL workarounds checked and updated accordingly. v2: - removed TODO to check if WA 14010919138 applies to regular TGL. - fixed display stepping in regular TGL (Anusha) BSpec: 52890 BSpec: 55378 BSpec: 44455 Reviewed-by:
Anusha Srivatsa <anusha.srivtsa@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Penne Lee <penne.y.lee@intel.com> Cc: Guangyao Bai <guangyao.bai@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
- 27 Aug, 2020 4 commits
-
-
José Roberto de Souza authored
Supported and enabled are different things so printing both. v3: using drrs->type instead of vbt.drrs_type Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: Srinivas K <srinivasx.k@intel.com> Cc: Hariom Pandey <hariom.pandey@intel.com> Reviewed-by:
-
José Roberto de Souza authored
Changes in the configuration could cause PSR to be compatible and enabled so driver must also be able to disable DRRS when doing fastsets. v2: Fixed name of DRRS compute function (Anshuman) Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/209 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/173 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/209 Cc: Srinivas K <srinivasx.k@intel.com> Cc: Hariom Pandey <hariom.pandey@intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by:
-
José Roberto de Souza authored
DRRS and PSR can't be enable together, so giving preference to PSR as it allows more power-savings by complete shutting down display, so to guarantee this, it should compute DRRS state after compute PSR. Cc: Srinivas K <srinivasx.k@intel.com> Cc: Hariom Pandey <hariom.pandey@intel.com> Reviewed-by:
-
Colin Ian King authored
There is a spelling mistake in a drm_err message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 26 Aug, 2020 3 commits
-
-
Clint Taylor authored
Enable HW Default flip for small PL. bspec: 52890 bspec: 53508 bspec: 53273 v2: rebase to drm-tip v3: move from ctx to gt workarounds. Remove whitelist. v4: move to rcs WA init Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Clint Taylor <clinton.a.taylor@intel.com> Reviewed-by:
-
Anshuman Gupta authored
HDCP code doesn't require to access power_well internal stuff, instead it should use the intel_display_power_well_is_enabled() to get the status of desired power_well. No functional change. v2: - used with_intel_runtime_pm instead of get/put. [Jani] v3: - rebased. Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Anshuman Gupta authored
Currently intel_hdcp_update_pipe() is also getting called for non-hdcp connectors and get through its conditional code flow, which is completely unnecessary for non-hdcp connectors, therefore it make sense to have an early return. No functional change. v2: - rebased. Reviewed-by:
Uma Shankar <uma.shankar@intel.com> Signed-off-by:
-
- 24 Aug, 2020 1 commit
-
-
Rodrigo Vivi authored
Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com>
-
- 21 Aug, 2020 1 commit
-
-
Mika Kuoppala authored
Our variety of defined gpu commands have the actual command id field and possibly length and flags applied. We did start to apply the mask during initialization of the cmd descriptors but forgot to also apply it on comparisons. Fix comparisons in order to properly deny access with associated commands. v2: fix lri with correct mask (Chris) References: 926abff2 ("drm/i915/cmdparser: Ignore Length operands during command matching") Reported-by:
Nicolai Stange <nstange@suse.de> Cc: stable@vger.kernel.org # v5.4+ Cc: Miroslav Benes <mbenes@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Chris Wilson <chris.p.wilson@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200817195926.12671-1-mika.kuoppala@linux.intel.com
-
- 19 Aug, 2020 1 commit
-
-
Matt Atwood authored
Add minimum width to planes, variable with specific formats for gen11+ to reflect recent bspec changes. Signed-off-by:
Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by:
-
- 17 Aug, 2020 1 commit
-
-
José Roberto de Souza authored
Major upgrade of HuC firmware with fixes and new features. Signed-off-by:
-
