- 07 May, 2024 40 commits
-
-
Filipe Manana authored
Export the relocation private helper find_next_inode() to inode.c, as this same logic is also used at btrfs_prune_dentries() and will be used by an upcoming change that adds an extent map shrinker. The next patch will change btrfs_prune_dentries() to use this helper. Reviewed-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Filipe Manana authored
The add_extent_mapping() function is short and trivial, there's no need to have a label for a quick exit in case of an error, even because there's no error handling needed, we just need to return the error. So remove that label and return directly. Also while at it remove the redundant initialization of 'ret', as that may help avoid some warnings with clang tools such as the one reported/fixed by commit 966de47f ("btrfs: remove redundant initialization of variables in log_new_ancestors"). Reviewed-by:
-
Filipe Manana authored
In the extent map self tests, when freeing all extent maps from a test extent map tree we are not expecting to find any extent map with a reference count different from 1 (the tree reference). If we find any, we just log a message but we don't fail the test, which makes it very easy to miss any bug/regression - no one reads the test messages unless a test fails. So change the behaviour to make a test fail if we find an extent map in the tree with a reference count different from 1. Make the failure happen only after removing all extent maps, so that we don't leak memory. Reviewed-by:
-
Filipe Manana authored
Instead of passing fs_info and extent map tree arguments to btrfs_add_extent_mapping(), we can pass an inode instead, as extent maps are always inserted in the extent map tree of an inode, and the fs_info can be extracted from the inode (inode->root->fs_info). The only exception is in the self tests where we allocate an extent map tree and then use it to insert/update/remove extent maps. However the tests can be changed to use a test inode and then use the inode's extent map tree. So change btrfs_add_extent_mapping() to have an inode as an argument instead of a fs_info and an extent map tree. This reduces the number of parameters and will also be needed for an upcoming change. Reviewed-by:
-
Filipe Manana authored
The csum_exist_in_range() function is now too trivial and is only used in one place, so open code it in its single caller. Reviewed-by:
-
Filipe Manana authored
Before deciding if we can do a NOCOW write into a range, one of the things we have to do is check if there are checksum items for that range. We do that through the btrfs_lookup_csums_list() function, which searches for checksums and adds them to a list supplied by the caller. But all we need is to check if there is any checksum, we don't need to look for all of them and collect them into a list, which requires more search time in the checksums tree, allocating memory for checksums items to add to the list, copy checksums from a leaf into those list items, then free that memory, etc. This is all unnecessary overhead, wasting mostly CPU time, and perhaps some occasional IO if we need to read from disk any extent buffers. So change btrfs_lookup_csums_list() to allow to return immediately in case it finds any checksum, without the need to add it to a list and read it from a leaf. This is accomplished by allowing a NULL list parameter and making the function return 1 if it found any checksum, 0 if it didn't found any, and a negative value in case of an error. The following test with fio was used to measure performance: $ cat test.sh #!/bin/bash DEV=/dev/nullb0 MNT=/mnt/nullb0 cat <<EOF > /tmp/fio-job.ini [global] name=fio-rand-write filename=$MNT/fio-rand-write rw=randwrite bssplit=4k/20:8k/20:16k/20:32k/20:64k/20 direct=1 numjobs=16 fallocate=posix time_based runtime=300 [file1] size=8G ioengine=io_uring iodepth=16 EOF umount $MNT &> /dev/null mkfs.btrfs -f $DEV mount -o ssd $DEV $MNT fio /tmp/fio-job.ini umount $MNT The test was run on a release kernel (Debian's default kernel config). The results before this patch: WRITE: bw=139MiB/s (146MB/s), 8204KiB/s-9504KiB/s (8401kB/s-9732kB/s), io=17.0GiB (18.3GB), run=125317-125344msec The results after this patch: WRITE: bw=153MiB/s (160MB/s), 9241KiB/s-10.0MiB/s (9463kB/s-10.5MB/s), io=17.0GiB (18.3GB), run=114054-114071msec Reviewed-by:
-
Filipe Manana authored
In the error path we have this while loop that keeps iterating over the csums of the list and then delete them from the list and free them, testing for an error (ret < 0) and list emptyness as the conditions of the while loop. Simplify this by using list_for_each_entry_safe() so there's no need to delete elements from the list and need to test the error condition on each iteration. Also rename the 'fail' label to 'out' since the label is not exclusive to a failure path, as we also end up there when the function succeeds, and it's also a more common label name. Reviewed-by:
-
Filipe Manana authored
There's no need to use a temporary list to add the checksums, we can just add them to input list and then on error delete and free any checksums that were added. So simplify and remove the temporary list. Reviewed-by:
-
Filipe Manana authored
All the callers of btrfs_lookup_csums_list() pass a value of 0 as the "search_commit" parameter. So remove it and make the function behave as to always search from the regular root. Reviewed-by:
-
Filipe Manana authored
Add a function comment to btrfs_lookup_csums_list() to document it. With another upcoming change its parameter list and return value will be less obvious. So add the documentation now so that it can be updated where needed later. Reviewed-by:
-
Filipe Manana authored
btrfs_page_mkwrite() is a struct vm_operations_struct callback and we define that structure in file.c. Currently the function is in inode.c and has to be exported to be used in file.c, which makes no sense because it's not used anywhere else. So move btrfs_page_mkwrite() from inode.c and into file.c. While at it do a few minor style changes: 1) Capitalize the first word of every comment and end each sentence with punctuation; 2) Avoid splitting some statements into two lines when everything fits in 85 characters or less. Signed-off-by:
-
Filipe Manana authored
There are no more users of btrfs_clone_chunk_map(), the last one (and only one ever) was removed in commit 1ec17ef5 ("btrfs: zoned: fix use-after-free in do_zone_finish()"). So remove btrfs_clone_chunk_map(). Reviewed-by:
-
Filipe Manana authored
At warn_about_uncommitted_trans(), there's no need to check if the list is empty and return, because list_for_each_entry_safe() is safe to call for an empty list, it simply does nothing. So remove the check. Reviewed-by:
-
Filipe Manana authored
At btrfs_finish_one_ordered() it's pointless to assign 0 to the 'ret' variable because if it has a non-zero value (error), we have already jumped to the 'out' label. So remove that redundant assignment. Reviewed-by:
-
Filipe Manana authored
The mod_start and mod_len fields of struct extent_map were introduced by commit 4e2f84e6 ("Btrfs: improve fsync by filtering extents that we want") in order to avoid too low performance when fsyncing a file that keeps getting extent maps merge, because it resulted in each fsync logging again csum ranges that were already merged before. We don't need this anymore as extent maps in the list of modified extents are never merged with other extent maps and once we log an extent map we remove it from the list of modified extent maps, so it's never logged twice. So remove the mod_start and mod_len fields from struct extent_map and use instead the start and len fields when logging checksums in the fast fsync path. This also makes EXTENT_FLAG_FILLING unused so remove it as well. Running the reproducer from the commit mentioned before, with a larger number of extents and against a null block device, so that IO is fast and we can better see any impact from searching checksums items and logging them, gave the following results from dd: Before this change: 409600000 bytes (410 MB, 391 MiB) copied, 22.948 s, 17.8 MB/s After this change: 409600000 bytes (410 MB, 391 MiB) copied, 22.9997 s, 17.8 MB/s So no changes in throughput. The test was done in a release kernel (non-debug, Debian's default kernel config) and its steps are the following: $ mkfs.btrfs -f /dev/nullb0 $ mount /dev/sdb /mnt $ dd if=/dev/zero of=/mnt/foobar bs=4k count=100000 oflag=sync $ umount /mnt This also reduces the size of struct extent_map from 128 bytes down to 112 bytes, so now we can have 36 extents maps per 4K page instead of 32. Reviewed-by:
-
Boris Burkov authored
Some of the operations after the free might convert more PERTRANS metadata. Do the freeing as late as possible to eliminate a source of leaked PERTRANS metadata. This helps with the pass rate of generic/269 and generic/475. Reviewed-by:
Qu Wenruo <qwu@suse.com> Signed-off-by:
Boris Burkov <boris@bur.io> Signed-off-by:
-
Qu Wenruo authored
For both compression and decompression paths, we always require a "struct page **pages" and "unsigned long nr_pages", this involves quite some part of the btrfs compression paths: - All the compression entry points - compressed_bio structure This affects both compression and decompression. - async_extent structure Unfortunately with all those involved parts, there is no good way to split the conversion into smaller patches while still passing compiling. So do this in one big conversion in one go. Please note this is direct page->folio conversion, no change on the page sized folio requirement yet. Signed-off-by:
-
Qu Wenruo authored
The new helper will do the same thing as btrfs_alloc_page_array(), but with folios. One extra difference is, there is no extra helper for bulk allocation, thus it may not be as efficient as the page version. Signed-off-by:
-
Qu Wenruo authored
Since insert_inline_extent() now only accepts a single page, it's much easier to convert it to use folio interfaces. Signed-off-by:
-
Qu Wenruo authored
Since our inline extent cannot accept anything larger than a sector, there is really no need to pass all the compressed pages to insert_inline_extent(). And just in case, expand the ASSERT()s to make sure we only try inline with compressed size no larger than sectorsize. Signed-off-by:
-
Qu Wenruo authored
Currently we have two wrappers to allocate and free a page for compression usage: - btrfs_alloc_compr_page() - btrfs_free_compr_page() The allocator would try to grab a page from the pool, and only allocate a new page if the pool is empty. The reclaimer would check if the pool is full, and if not full it would put the page into the pool. This patch converts both helpers to use folio interfaces, and allowing further conversion of compression path to folios. Signed-off-by:
-
Qu Wenruo authored
For all the supported compression algorithms, the compression path would always need to grab the page cache, then do the compression. Normally we would get a page reference without any problem, since the write path should have already locked the pages in the write range. For the sake of error handling, we should handle the page cache miss case. Adds a common wrapper, btrfs_compress_find_get_page(), which calls find_get_page(), and do the error handling along with an error message. Callers inside compression path would only need to call btrfs_compress_find_get_page(), and error out if it returned any error. Signed-off-by:
-
Filipe Manana authored
Nowadays before starting a reflink operation we do this: 1) Take the VFS lock of the inodes in exclusive mode (a rw semaphore); 2) Take the mmap lock of the inodes (struct btrfs_inode::i_mmap_lock); 3) Flush all delalloc in the source and target ranges; 4) Wait for all ordered extents in the source and target ranges to complete; 5) Lock the source and destination ranges in the inodes' io trees. In step 5 we lock the source range because: 1) We needed to serialize against mmap writes, but that is not needed anymore because nowadays we do that through the inode's i_mmap_lock (step 2). This happens since commit 8c99516a ("btrfs: exclude mmaps while doing remap"); 2) To serialize against a concurrent relocation and avoid generating a delayed ref for an extent that was just dropped by relocation, see commit d8b55242 ("Btrfs: fix race between reflink/dedupe and relocation"). Locking the source range however blocks any concurrent reads for that range and makes test case generic/733 fail. So instead of locking the source range during reflinks, make relocation read lock the inode's i_mmap_lock, so that it serializes with a concurrent reflink while still able to run concurrently with mmap writes and allow concurrent reads too. Reviewed-by:
-
Dan Carpenter authored
This check "if (inherit->num_qgroups > PAGE_SIZE)" is confusing and unnecessary. The problem with the check is that static checkers flag it as a potential mixup of between units of bytes vs number of elements. Fortunately, the check can safely be deleted because the next check is correct and applies an even stricter limit: if (size != struct_size(inherit, qgroups, inherit->num_qgroups)) return -EINVAL; The "inherit" struct ends in a variable array of __u64 and "inherit->num_qgroups" is the number of elements in the array. At the start of the function we check that: if (size < sizeof(*inherit) || size > PAGE_SIZE) return -EINVAL; Thus, since we verify that the whole struct fits within one page, that means that the number of elements in the inherit->qgroups[] array must be less than PAGE_SIZE. Reviewed-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
-
Goldwyn Rodrigues authored
Use folio instead of page in put_file_data(). Add a warning in case higher order folio is found, this will be implemented in the future. Signed-off-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by:
-
Goldwyn Rodrigues authored
Convert page references to folios and call the respective folio functions. Since find_or_create_page() takes a mask argument, call __filemap_get_folio() instead of filemap_grab_folio(). The patch assumes folio size is PAGE_SIZE, add a warning in case it's a higher order that will be implemented in the future. Signed-off-by:
-
Goldwyn Rodrigues authored
Convert usage of page to folio in prealloc_file_extent_cluster() Reviewed-by:
-
Anand Jain authored
Unify naming of return value to the preferred way. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Anand Jain authored
Unify naming of return value to the preferred way. Signed-off-by:
-
Anand Jain authored
Unify naming of return value to the preferred way. Signed-off-by:
-
Anand Jain authored
Unify naming of return value to the preferred way. Signed-off-by:
-
Anand Jain authored
Unify naming of return value to the preferred way. Signed-off-by:
-
Anand Jain authored
Unify naming of return value to the preferred way. Signed-off-by:
-
Anand Jain authored
Unify naming of return value to the preferred way. Signed-off-by:
-
Anand Jain authored
Unify naming of return value to the preferred way. Signed-off-by:
-
Anand Jain authored
Unify naming of return value to the preferred way. Signed-off-by:
-
Anand Jain authored
Unify naming of return value to the preferred way. Signed-off-by:
-
Anand Jain authored
Unify naming of return value to the preferred way. Signed-off-by:
-
Tavian Barnes authored
We recently tracked down a race condition that triggered a read for an extent buffer with EXTENT_BUFFER_UPTODATE already set. While this read was in progress, other concurrent readers would see the UPTODATE bit and return early as if the read was already complete, making accesses to the extent buffer conflict with the read operation that was overwriting it. Add a WARN_ON() to end_bbio_meta_read() for this situation to make similar races easier to spot in the future. Reviewed-by:
Tavian Barnes <tavianator@tavianator.com> Reviewed-by:
-
Tavian Barnes authored
We are clearing the bit and waking up any waiters in two different places. Factor that code out into a static helper function. Reviewed-by:
-
