- 19 Oct, 2018 3 commits
-
-
Doug Berger authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit c3c397c1 ] When using the fixed PHY with GENET (e.g. MOCA) the PHY link status can be determined from the internal link status captured by the MAC. This allows the PHY state machine to use the correct link state with the fixed PHY even if MAC link event interrupts are missed when the net device is opened. Fixes: 8d88c6eb ("net: bcmgenet: enable MoCA link state change detection") Signed-off-by:
Doug Berger <opendmb@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Greg Hackmann authored
BugLink: https://bugs.launchpad.net/bugs/1797563 The ION_IOC_{MAP,SHARE} ioctls drop and reacquire client->lock several times while operating on one of the client's ion_handles. This creates windows where userspace can call ION_IOC_FREE on the same client with the same handle, and effectively make the kernel drop its own reference. For example: - thread A: ION_IOC_ALLOC creates an ion_handle with refcount 1 - thread A: starts ION_IOC_MAP and increments the refcount to 2 - thread B: ION_IOC_FREE decrements the refcount to 1 - thread B: ION_IOC_FREE decrements the refcount to 0 and frees the handle - thread A: continues ION_IOC_MAP with a dangling ion_handle * to freed memory Fix this by holding client->lock for the duration of ION_IOC_{MAP,SHARE}, preventing the concurrent ION_IOC_FREE. Also remove ion_handle_get_by_id(), since there's literally no way to use it safely. This patch is applied on top of 4.4.y, and applies to older kernels too. 4.9.y was fixed separately. Kernels 4.12 and later are unaffected, since all the underlying ion_handle infrastructure has been ripped out. Cc: stable@vger.kernel.org # v4.4- Signed-off-by:
Greg Hackmann <ghackmann@google.com> Acked-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
-
Kleber Sacilotto de Souza authored
Ignore: yes Signed-off-by:
-
- 02 Oct, 2018 37 commits
-
-
Kleber Sacilotto de Souza authored
Signed-off-by: -
Kleber Sacilotto de Souza authored
BugLink: https://bugs.launchpad.net/bugs/1795582Signed-off-by:
-
Michal Suchanek authored
BugLink: https://bugs.launchpad.net/bugs/1795662 - log an error message when registration fails and no error code listed in the switch is returned - translate the hv error code to posix error code and return it from fw_register - return the posix error code from fw_register to the process writing to sysfs - return EEXIST on re-registration - return success on deregistration when fadump is not registered - return ENODEV when no memory is reserved for fadump Signed-off-by:
Michal Suchanek <msuchanek@suse.de> Tested-by:
Hari Bathini <hbathini@linux.vnet.ibm.com> [mpe: Use pr_err() to shrink the error print] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> (backported from commit 98b8cd7f) Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by:
-
Kleber Sacilotto de Souza authored
The package tracking bug number is not inserted anymore on the changelog by the link-to-tracker script. Instead, it creates/updates the debian.<branch>/tracking-bug file and commits the change. We want this commit to be added to the changelog in a similar fashion as before, as the first entry. So change the git-ubuntu-log script to detect that commit and insert it in the right place. Ignore: yes Signed-off-by:
-
Bart Van Assche authored
BugLink: https://bugs.launchpad.net/bugs/1791790 Make sure that if the timeout timer fires after a queue has been marked "dying" that the affected requests are finished. Reported-by:
chenxiang (M) <chenxiang66@hisilicon.com> Fixes: commit 287922eb ("block: defer timeouts to a workqueue") Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Tested-by:
Jens Axboe <axboe@kernel.dk> (cherry picked from commit 4e9b6f20) Signed-off-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by:
-
Wenjia Zhang authored
BugLink: https://bugs.launchpad.net/bugs/1793086 qeth_query_oat_command() currently allocates the kernel buffer for the SIOC_QETH_QUERY_OAT ioctl with kzalloc. So on systems with fragmented memory, large allocations may fail (eg. the qethqoat tool by default uses 132KB). Solve this issue by using vzalloc, backing the allocation with non-contiguous memory. Signed-off-by:
Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Kiran Kumar Modukuri authored
BugLink: https://bugs.launchpad.net/bugs/1793430 [Description] In a heavily loaded system where the system pagecache is nearing memory limits and fscache is enabled, pages can be leaked by fscache while trying read pages from cachefiles backend. This can happen because two applications can be reading same page from a single mount, two threads can be trying to read the backing page at same time. This results in one of the thread finding that a page for the backing file or netfs file is already in the radix tree. During the error handling cachefiles does not cleanup the reference on backing page, leading to page leak. [Fix] The fix is straightforward, to decrement the reference when error is encounterd. [Testing] I have tested the fix using following method for 12+ hrs. 1) mkdir -p /mnt/nfs ; mount -o vers=3,fsc <server_ip>:/export /mnt/nfs 2) create 10000 files of 2.8MB in a NFS mount. 3) start a thread to simulate heavy VM presssure (while true ; do echo 3 > /proc/sys/vm/drop_caches ; sleep 1 ; done)& 4) start multiple parallel reader for data set at same time find /mnt/nfs -type f | xargs -P 80 cat > /dev/null & find /mnt/nfs -type f | xargs -P 80 cat > /dev/null & find /mnt/nfs -type f | xargs -P 80 cat > /dev/null & .. .. find /mnt/nfs -type f | xargs -P 80 cat > /dev/null & find /mnt/nfs -type f | xargs -P 80 cat > /dev/null & 5) finally check using cat /proc/fs/fscache/stats | grep -i pages ; free -h , cat /proc/meminfo and page-types -r -b lru to ensure all pages are freed. Reviewed-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
Shantanu Goel <sgoel01@yahoo.com> Signed-off-by:
Kiran Kumar Modukuri <kiran.modukuri@gmail.com> [dja: forward ported to current upstream] Signed-off-by:
Daniel Axtens <daniel.axtens@canonical.com> Acked-by:
-
Michal Wnukowski authored
BugLink: https://bugs.launchpad.net/bugs/1788222 In many architectures loads may be reordered with older stores to different locations. In the nvme driver the following two operations could be reordered: - Write shadow doorbell (dbbuf_db) into memory. - Read EventIdx (dbbuf_ei) from memory. This can result in a potential race condition between driver and VM host processing requests (if given virtual NVMe controller has a support for shadow doorbell). If that occurs, then the NVMe controller may decide to wait for MMIO doorbell from guest operating system, and guest driver may decide not to issue MMIO doorbell on any of subsequent commands. This issue is purely timing-dependent one, so there is no easy way to reproduce it. Currently the easiest known approach is to run "Oracle IO Numbers" (orion) that is shipped with Oracle DB: orion -run advanced -num_large 0 -size_small 8 -type rand -simulate \ concat -write 40 -duration 120 -matrix row -testname nvme_test Where nvme_test is a .lun file that contains a list of NVMe block devices to run test against. Limiting number of vCPUs assigned to given VM instance seems to increase chances for this bug to occur. On test environment with VM that got 4 NVMe drives and 1 vCPU assigned the virtual NVMe controller hang could be observed within 10-20 minutes. That correspond to about 400-500k IO operations processed (or about 100GB of IO read/writes). Orion tool was used as a validation and set to run in a loop for 36 hours (equivalent of pushing 550M IO operations). No issues were observed. That suggest that the patch fixes the issue. Fixes: f9f38e33 ("nvme: improve performance for virtual NVMe devices") Signed-off-by:
Michal Wnukowski <wnukowski@google.com> Reviewed-by:
Keith Busch <keith.busch@intel.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> [hch: updated changelog and comment a bit] Signed-off-by:
Christoph Hellwig <hch@lst.de> Fixes: 4a4037f2 ("UBUNTU: SAUCE: nvme: improve performance for virtual NVMe devices") (backported from commit f1ed3df2) Signed-off-by:
Marcelo Henrique Cerri <marcelo.cerri@canonical.com> Acked-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1792419Signed-off-by:
-
Dave Airlie authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 7cf321d1 upstream. This fixes a regression in all these drivers since the cache mode tracking was fixed for mixed mappings. It uses the new arch API to add the VRAM range to the PAT mapping tracking tables. Fixes: 87744ab3 (mm: fix cache mode tracking in vm_insert_mixed()) Reviewed-by: Christian König <christian.koenig@amd.com>. Signed-off-by:
Dave Airlie <airlied@redhat.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Dave Airlie authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 8ef42276 upstream. A recent change to the mm code in: 87744ab3 mm: fix cache mode tracking in vm_insert_mixed() started enforcing checking the memory type against the registered list for amixed pfn insertion mappings. It happens that the drm drivers for a number of gpus relied on this being broken. Currently the driver only inserted VRAM mappings into the tracking table when they came from the kernel, and userspace mappings never landed in the table. This led to a regression where all the mapping end up as UC instead of WC now. I've considered a number of solutions but since this needs to be fixed in fixes and not next, and some of the solutions were going to introduce overhead that hadn't been there before I didn't consider them viable at this stage. These mainly concerned hooking into the TTM io reserve APIs, but these API have a bunch of fast paths I didn't want to unwind to add this to. The solution I've decided on is to add a new API like the arch_phys_wc APIs (these would have worked but wc_del didn't take a range), and use them from the drivers to add a WC compatible mapping to the table for all VRAM on those GPUs. This means we can then create userspace mapping that won't get degraded to UC. v1.1: use CONFIG_X86_PAT + add some comments in io.h Cc: Toshi Kani <toshi.kani@hp.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: x86@kernel.org Cc: mcgrof@suse.com Cc: Dan Williams <dan.j.williams@intel.com> Acked-by:
Ingo Molnar <mingo@kernel.org> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Jeremy Cline authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 7b6924d9 upstream. 'type' is user-controlled, so sanitize it after the bounds check to avoid using it in speculative execution. This covers the following potential gadgets detected with the help of smatch: * fs/ext4/super.c:5741 ext4_quota_read() warn: potential spectre issue 'sb_dqopt(sb)->files' [r] * fs/ext4/super.c:5778 ext4_quota_write() warn: potential spectre issue 'sb_dqopt(sb)->files' [r] * fs/f2fs/super.c:1552 f2fs_quota_read() warn: potential spectre issue 'sb_dqopt(sb)->files' [r] * fs/f2fs/super.c:1608 f2fs_quota_write() warn: potential spectre issue 'sb_dqopt(sb)->files' [r] * fs/quota/dquot.c:412 mark_info_dirty() warn: potential spectre issue 'sb_dqopt(sb)->info' [w] * fs/quota/dquot.c:933 dqinit_needed() warn: potential spectre issue 'dquots' [r] * fs/quota/dquot.c:2112 dquot_commit_info() warn: potential spectre issue 'dqopt->ops' [r] * fs/quota/dquot.c:2362 vfs_load_quota_inode() warn: potential spectre issue 'dqopt->files' [w] (local cap) * fs/quota/dquot.c:2369 vfs_load_quota_inode() warn: potential spectre issue 'dqopt->ops' [w] (local cap) * fs/quota/dquot.c:2370 vfs_load_quota_inode() warn: potential spectre issue 'dqopt->info' [w] (local cap) * fs/quota/quota.c:110 quota_getfmt() warn: potential spectre issue 'sb_dqopt(sb)->info' [r] * fs/quota/quota_v2.c:84 v2_check_quota_file() warn: potential spectre issue 'quota_magics' [w] * fs/quota/quota_v2.c:85 v2_check_quota_file() warn: potential spectre issue 'quota_versions' [w] * fs/quota/quota_v2.c:96 v2_read_file_info() warn: potential spectre issue 'dqopt->info' [r] * fs/quota/quota_v2.c:172 v2_write_file_info() warn: potential spectre issue 'dqopt->info' [r] Additionally, a quick inspection indicates there are array accesses with 'type' in quota_on() and quota_off() functions which are also addressed by this. Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Jeremy Cline <jcline@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Adrian Hunter authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 99cbbe56 upstream. When the number of queues grows beyond 32, the array of queues is resized but not all members were being copied. Fix by also copying 'tid', 'cpu' and 'set'. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Fixes: e5027893 ("perf auxtrace: Add helpers for queuing AUX area tracing data") Link: http://lkml.kernel.org/r/20180814084608.6563-1-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Shan Hai authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 3943b040 upstream. The writeback thread would exit with a lock held when the cache device is detached via sysfs interface, fix it by releasing the held lock before exiting the while-loop. Fixes: fadd94e0 (bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set) Signed-off-by:
Shan Hai <shan.hai@oracle.com> Signed-off-by:
Coly Li <colyli@suse.de> Tested-by:
Shenghui Wang <shhuiw@foxmail.com> Cc: stable@vger.kernel.org #4.17+ Signed-off-by:
-
Christian Brauner authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 82c9a927 upstream. When running in a container with a user namespace, if you call getxattr with name = "system.posix_acl_access" and size % 8 != 4, then getxattr silently skips the user namespace fixup that it normally does resulting in un-fixed-up data being returned. This is caused by posix_acl_fix_xattr_to_user() being passed the total buffer size and not the actual size of the xattr as returned by vfs_getxattr(). This commit passes the actual length of the xattr as returned by vfs_getxattr() down. A reproducer for the issue is: touch acl_posix setfacl -m user:0:rwx acl_posix and the compile: #define _GNU_SOURCE #include <errno.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <unistd.h> #include <attr/xattr.h> /* Run in user namespace with nsuid 0 mapped to uid != 0 on the host. */ int main(int argc, void **argv) { ssize_t ret1, ret2; char buf1[128], buf2[132]; int fret = EXIT_SUCCESS; char *file; if (argc < 2) { fprintf(stderr, "Please specify a file with " "\"system.posix_acl_access\" permissions set\n"); _exit(EXIT_FAILURE); } file = argv[1]; ret1 = getxattr(file, "system.posix_acl_access", buf1, sizeof(buf1)); if (ret1 < 0) { fprintf(stderr, "%s - Failed to retrieve " "\"system.posix_acl_access\" " "from \"%s\"\n", strerror(errno), file); _exit(EXIT_FAILURE); } ret2 = getxattr(file, "system.posix_acl_access", buf2, sizeof(buf2)); if (ret2 < 0) { fprintf(stderr, "%s - Failed to retrieve " "\"system.posix_acl_access\" " "from \"%s\"\n", strerror(errno), file); _exit(EXIT_FAILURE); } if (ret1 != ret2) { fprintf(stderr, "The value of \"system.posix_acl_" "access\" for file \"%s\" changed " "between two successive calls\n", file); _exit(EXIT_FAILURE); } for (ssize_t i = 0; i < ret2; i++) { if (buf1[i] == buf2[i]) continue; fprintf(stderr, "Unexpected different in byte %zd: " "%02x != %02x\n", i, buf1[i], buf2[i]); fret = EXIT_FAILURE; } if (fret == EXIT_SUCCESS) fprintf(stderr, "Test passed\n"); else fprintf(stderr, "Test failed\n"); _exit(fret); } and run: ./tester acl_posix On a non-fixed up kernel this should return something like: root@c1:/# ./t Unexpected different in byte 16: ffffffa0 != 00 Unexpected different in byte 17: ffffff86 != 00 Unexpected different in byte 18: 01 != 00 and on a fixed kernel: root@c1:~# ./t Test passed Cc: stable@vger.kernel.org Fixes: 2f6f0654 ("userns: Convert vfs posix_acl support to use kuids and kgids") Link: https://bugzilla.kernel.org/show_bug.cgi?id=199945Reported-by:
Colin Watson <cjwatson@ubuntu.com> Signed-off-by:
Christian Brauner <christian@brauner.io> Acked-by:
Serge Hallyn <serge@hallyn.com> Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Mikulas Patocka authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit bb24153a upstream. The default delay 5 jiffies is too much when the kernel is compiled with HZ=100 - it results in jumpy cursor in Xwindow. In order to find out the optimal delay, I benchmarked the driver on 1280x720x30fps video. I found out that with HZ=1000, 10ms is acceptable, but with HZ=250 or HZ=300, we need 4ms, so that the video is played without any frame skips. This patch changes the delay to this value. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Mikulas Patocka authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 8c5b0442 upstream. I have a USB display adapter using the udlfb driver and I use it on an ARM board that doesn't have any graphics card. When I plug the adapter in, the console is properly displayed, however when I unplug and re-plug the adapter, the console is not displayed and I can't access it until I reboot the board. The reason is this: When the adapter is unplugged, dlfb_usb_disconnect calls unlink_framebuffer, then it waits until the reference count drops to zero and then it deallocates the framebuffer. However, the console that is attached to the framebuffer device keeps the reference count non-zero, so the framebuffer device is never destroyed. When the USB adapter is plugged again, it creates a new device /dev/fb1 and the console is not attached to it. This patch fixes the bug by unbinding the console from unlink_framebuffer. The code to unbind the console is moved from do_unregister_framebuffer to a function unbind_console. When the console is unbound, the reference count drops to zero and the udlfb driver frees the framebuffer. When the adapter is plugged back, a new framebuffer is created and the console is attached to it. Signed-off-by:
-
Vignesh R authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 38dabd91 upstream. pwm-tiehrpwm driver disables PWM output by putting it in low output state via active AQCSFRC register in ehrpwm_pwm_disable(). But, the AQCSFRC shadow register is not updated. Therefore, when shadow AQCSFRC register is re-enabled in ehrpwm_pwm_enable() (say to enable second PWM output), previous settings are lost as shadow register value is loaded into active register. This results in things like PWMA getting enabled automatically, when PWMB is enabled and vice versa. Fix this by updating AQCSFRC shadow register as well during ehrpwm_pwm_disable(). Fixes: 19891b20 ("pwm: pwm-tiehrpwm: PWM driver support for EHRPWM") Cc: stable@vger.kernel.org Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Richard Weinberger authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 59965593 upstream. In ubifs_jnl_update() we sync parent and child inodes to the flash, in case of xattrs, the parent inode (AKA host inode) has a non-zero data_len. Therefore we need to adjust synced_i_size too. This issue was reported by ubifs self tests unter a xattr related work load. UBIFS error (ubi0:0 pid 1896): dbg_check_synced_i_size: ui_size is 4, synced_i_size is 0, but inode is clean UBIFS error (ubi0:0 pid 1896): dbg_check_synced_i_size: i_ino 65, i_mode 0x81a4, i_size 4 Cc: <stable@vger.kernel.org> Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Richard Weinberger authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 95a22d20 upstream. Check whether the size is within bounds before using it. If the size is not correct, abort and dump the bad data node. Cc: Kees Cook <keescook@chromium.org> Cc: Silvio Cesare <silvio.cesare@gmail.com> Cc: stable@vger.kernel.org Fixes: 1e51764a ("UBIFS: add new flash file system") Reported-by:
Silvio Cesare <silvio.cesare@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Richard Weinberger authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 08acbdd6 upstream. This reverts commit 353748a3. It bypassed the linux-mtd review process and fixes the issue not as it should. Cc: Kees Cook <keescook@chromium.org> Cc: Silvio Cesare <silvio.cesare@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Richard Weinberger authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit eef19816 upstream. Allocate the buffer after we return early. Otherwise memory is being leaked. Cc: <stable@vger.kernel.org> Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by:
-
Jann Horn authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 5820f140 upstream. The old code would hold the userns_state_mutex indefinitely if memdup_user_nul stalled due to e.g. a userfault region. Prevent that by moving the memdup_user_nul in front of the mutex_lock(). Note: This changes the error precedence of invalid buf/count/*ppos vs map already written / capabilities missing. Fixes: 22d917d8 ("userns: Rework the user_namespace adding uid/gid...") Cc: stable@vger.kernel.org Signed-off-by:
Jann Horn <jannh@google.com> Acked-by:
-
Jann Horn authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 42a0cc34 upstream. Holding uts_sem as a writer while accessing userspace memory allows a namespace admin to stall all processes that attempt to take uts_sem. Instead, move data through stack buffers and don't access userspace memory while uts_sem is held. Cc: stable@vger.kernel.org Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Al Viro authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 9ba3eb51 upstream. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jacob Pan authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 1c48db44 upstream. PFSID should be used in the invalidation descriptor for flushing device IOTLBs on SRIOV VFs. Signed-off-by:
Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: stable@vger.kernel.org Cc: "Ashok Raj" <ashok.raj@intel.com> Cc: "Lu Baolu" <baolu.lu@linux.intel.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Jacob Pan authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 0f725561 upstream. When SRIOV VF device IOTLB is invalidated, we need to provide the PF source ID such that IOMMU hardware can gauge the depth of invalidation queue which is shared among VFs. This is needed when device invalidation throttle (DIT) capability is supported. This patch adds bit definitions for checking and tracking PFSID. Signed-off-by:
-
Peter Zijlstra authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit a6f57208 upstream. Will noted that only checking mm_users is incorrect; we should also check mm_count in order to cover CPUs that have a lazy reference to this mm (and could do speculative TLB operations). If removing this turns out to be a performance issue, we can re-instate a more complete check, but in tlb_table_flush() eliding the call_rcu_sched(). Fixes: 26723911 ("mm, powerpc: move the RCU page-table freeing into generic code") Reported-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Rik van Riel <riel@surriel.com> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jon Hunter authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 6e181190 upstream. On all versions of Tegra30 Cardhu, the reset signal to the NXP PCA9546 I2C mux is connected to the Tegra GPIO BB0. Currently, this pin on the Tegra is not configured as a GPIO but as a special-function IO (SFIO) that is multiplexing the pin to an I2S controller. On exiting system suspend, I2C commands sent to the PCA9546 are failing because there is no ACK. Although it is not possible to see exactly what is happening to the reset during suspend, by ensuring it is configured as a GPIO and driven high, to de-assert the reset, the failures are no longer seen. Please note that this GPIO is also used to drive the reset signal going to the camera connector on the board. However, given that there is no camera support currently for Cardhu, this should not have any impact. Fixes: 40431d16 ("ARM: tegra: enable PCA9546 on Cardhu") Cc: stable@vger.kernel.org Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 0914bb96 upstream. "dev->nr_children" is the number of children which were parsed successfully in bl_parse_stripe(). It could be all of them and then, in that case, it is equal to v->stripe.volumes_count. Either way, the > should be >= so that we don't go beyond the end of what we're supposed to. Fixes: 5c83746a ("pnfs/blocklayout: in-kernel GETDEVICEINFO XDR parsing") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
zhangyi (F) authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 3df6f61f upstream. Commit ea0212f4 (power: auto select CONFIG_SRCU) made the code in drivers/base/power/wakeup.c use SRCU instead of RCU, but it forgot to select CONFIG_SRCU in Kconfig, which leads to the following build error if CONFIG_SRCU is not selected somewhere else: drivers/built-in.o: In function `wakeup_source_remove': (.text+0x3c6fc): undefined reference to `synchronize_srcu' drivers/built-in.o: In function `pm_print_active_wakeup_sources': (.text+0x3c7a8): undefined reference to `__srcu_read_lock' drivers/built-in.o: In function `pm_print_active_wakeup_sources': (.text+0x3c84c): undefined reference to `__srcu_read_unlock' drivers/built-in.o: In function `device_wakeup_arm_wake_irqs': (.text+0x3d1d8): undefined reference to `__srcu_read_lock' drivers/built-in.o: In function `device_wakeup_arm_wake_irqs': (.text+0x3d228): undefined reference to `__srcu_read_unlock' drivers/built-in.o: In function `device_wakeup_disarm_wake_irqs': (.text+0x3d24c): undefined reference to `__srcu_read_lock' drivers/built-in.o: In function `device_wakeup_disarm_wake_irqs': (.text+0x3d29c): undefined reference to `__srcu_read_unlock' drivers/built-in.o:(.data+0x4158): undefined reference to `process_srcu' Fix this error by selecting CONFIG_SRCU when PM_SLEEP is enabled. Fixes: ea0212f4 (power: auto select CONFIG_SRCU) Cc: 4.2+ <stable@vger.kernel.org> # 4.2+ Signed-off-by:
zhangyi (F) <yi.zhang@huawei.com> [ rjw: Minor subject/changelog fixups ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Tomas Bortoli authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 10aa1452 upstream. Added checks to prevent GPFs from raising. Link: http://lkml.kernel.org/r/20180727110558.5479-1-tomasbortoli@gmail.comSigned-off-by:
Tomas Bortoli <tomasbortoli@gmail.com> Reported-by: syzbot+1a262da37d3bead15c39@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by:
Dominique Martinet <dominique.martinet@cea.fr> Signed-off-by:
-
Steven Rostedt (VMware) authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 016f8ffc upstream. While debugging another bug, I was looking at all the synchronize*() functions being used in kernel/trace, and noticed that trace_uprobes was using synchronize_sched(), with a comment to synchronize with {u,ret}_probe_trace_func(). When looking at those functions, the data is protected with "rcu_read_lock()" and not with "rcu_read_lock_sched()". This is using the wrong synchronize_*() function. Link: http://lkml.kernel.org/r/20180809160553.469e1e32@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 70ed91c6 ("tracing/uprobes: Support ftrace_event_file base multibuffer") Acked-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Snild Dolkow authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 3e536e22 upstream. There is a window for racing when printing directly to task->comm, allowing other threads to see a non-terminated string. The vsnprintf function fills the buffer, counts the truncated chars, then finally writes the \0 at the end. creator other vsnprintf: fill (not terminated) count the rest trace_sched_waking(p): ... memcpy(comm, p->comm, TASK_COMM_LEN) write \0 The consequences depend on how 'other' uses the string. In our case, it was copied into the tracing system's saved cmdlines, a buffer of adjacent TASK_COMM_LEN-byte buffers (note the 'n' where 0 should be): crash-arm64> x/1024s savedcmd->saved_cmdlines | grep 'evenk' 0xffffffd5b3818640: "irq/497-pwr_evenkworker/u16:12" ...and a strcpy out of there would cause stack corruption: [224761.522292] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffff9bf9783c78 crash-arm64> kbt | grep 'comm\|trace_print_context' #6 0xffffff9bf9783c78 in trace_print_context+0x18c(+396) comm (char [16]) = "irq/497-pwr_even" crash-arm64> rd 0xffffffd4d0e17d14 8 ffffffd4d0e17d14: 2f71726900000000 5f7277702d373934 ....irq/497-pwr_ ffffffd4d0e17d24: 726f776b6e657665 3a3631752f72656b evenkworker/u16: ffffffd4d0e17d34: f9780248ff003231 cede60e0ffffff9b 12..H.x......`.. ffffffd4d0e17d44: cede60c8ffffffd4 00000fffffffffd4 .....`.......... The workaround in e09e2867 (use strlcpy in __trace_find_cmdline) was likely needed because of this same bug. Solved by vsnprintf:ing to a local buffer, then using set_task_comm(). This way, there won't be a window where comm is not terminated. Link: http://lkml.kernel.org/r/20180726071539.188015-1-snild@sony.com Cc: stable@vger.kernel.org Fixes: bc0c38d1 ("ftrace: latency tracer infrastructure") Reviewed-by:
Snild Dolkow <snild@sony.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit 757d9140 upstream. Masami Hiramatsu reported: Current trace-enable attribute in sysfs returns an error if user writes the same setting value as current one, e.g. # cat /sys/block/sda/trace/enable 0 # echo 0 > /sys/block/sda/trace/enable bash: echo: write error: Invalid argument # echo 1 > /sys/block/sda/trace/enable # echo 1 > /sys/block/sda/trace/enable bash: echo: write error: Device or resource busy But this is not a preferred behavior, it should ignore if new setting is same as current one. This fixes the problem as below. # cat /sys/block/sda/trace/enable 0 # echo 0 > /sys/block/sda/trace/enable # echo 1 > /sys/block/sda/trace/enable # echo 1 > /sys/block/sda/trace/enable Link: http://lkml.kernel.org/r/20180816103802.08678002@gandalf.local.home Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: stable@vger.kernel.org Fixes: cd649b8b ("blktrace: remove sysfs_blk_trace_enable_show/store()") Reported-by:
Masami Hiramatsu <mhiramat@kernel.org> Tested-by:
-
Steven Rostedt (VMware) authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit f143641b upstream. Currently, when one echo's in 1 into tracing_on, the current tracer's "start()" function is executed, even if tracing_on was already one. This can lead to strange side effects. One being that if the hwlat tracer is enabled, and someone does "echo 1 > tracing_on" into tracing_on, the hwlat tracer's start() function is called again which will recreate another kernel thread, and make it unable to remove the old one. Link: http://lkml.kernel.org/r/1533120354-22923-1-git-send-email-erica.bugden@linutronix.de Cc: stable@vger.kernel.org Fixes: 2df8f8a6 ("tracing: Fix regression with irqsoff tracer and tracing_on file") Reported-by:
Erica Bugden <erica.bugden@linutronix.de> Signed-off-by:
-
Nadav Amit authored
BugLink: https://bugs.launchpad.net/bugs/1792419 commit c3cc1b0f upstream. Currently, when all modules, including VMCI and VMware balloon are built into the kernel, the initialization of the balloon happens before the VMCI is probed. As a result, the balloon fails to initialize the VMCI doorbell, which it uses to get asynchronous requests for balloon size changes. The problem can be seen in the logs, in the form of the following message: "vmw_balloon: failed to initialize vmci doorbell" The driver would work correctly but slightly less efficiently, probing for requests periodically. This patch changes the balloon to be initialized using late_initcall() instead of module_init() to address this issue. It does not address a situation in which VMCI is built as a module and the balloon is built into the kernel. Fixes: 48e3d668 ("VMware balloon: Enable notification via VMCI") Cc: stable@vger.kernel.org Reviewed-by:
Xavier Deguillard <xdeguillard@vmware.com> Signed-off-by:
Nadav Amit <namit@vmware.com> Signed-off-by:
-
