Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Signed-off-by: Steve French <sfrench@us.ibm.com>

Caused by unneeded reopen during reconnect while spinlock held.

Fixes kernel bugzilla bug #7903

Thanks to Lin Feng Shen for testing this, and Amit Arora for
some nice problem determination to narrow this down.
Acked-by: Dave Kleikamp <shaggy@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Nail two more simple section mismatch errors
  [IA64] fix section mismatch warnings
  [IA64] rename partial_page
  [IA64] Ensure that machvec is set up takes place before serial console
  [IA64] vector-domain - fix vector_table
  [IA64] vector-domain - handle assign_irq_vector(AUTO_ASSIGN)

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
  kbuild: fix modpost warnings for xtensa
  kbuild: be more foregiving on init section naming
  kbuild: rearrange a few function in modpost
  kbuild: use LDFLAGS_MODULE only for .ko links
  kconfig: remove unused members from struct symbol
  kconfig: attach help text to menus
  kbuild: fix up printing of Linux C Library version in scripts/ver_linux
  kbuild: do not do section mismatch checks on vmlinux in 2nd pass

The Xtensa architecture places literal pools in sections separate
from the instructions. The corresponsing text sections, therefore,
reference the .literal section, and we have to suppress those
warnings.

The naming convention defines the name for a literal
section as .SECTION.literal, unless .SECTION is .text. In that case
the name is only .literal. Using strncmp() instead of strcmp()
to compare the from-section with .SECTION.init.refok in pattern 0
should not cause any regressions for other architectures.

We also need to suppress warnings for two informational
sections (.xt.lit and .xt.prop) used by the Xtensa architecture.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

pcibios_setup (between 'pci_setup' and 'quirk_mellanox_tavor')
setup_profiling_timer (between 'write_profile' and 'delayed_put_task_struct')
Signed-off-by: Tony Luck <tony.luck@intel.com>

In 741f98fe Sam added full
checking across the entire vmlinux image.  This flushed out
a dozen new section mismatch warnings.  Start the whack-a-mole
game again to stomp them out.
Signed-off-by: Tony Luck <tony.luck@intel.com>

Jens has added a partial_page thing in splice whcih conflicts with the ia64
one.  Rename ia64 out of the way.  (ia64 chose poorly).
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>

In the whitelist function of modpost now use the same
check to identify init_section as in other places of modpost.
This has the effect that we now recognize sections named
.init.text.19 as init sections and we no longer warn
when we see these.

At the same time make surrounding code readable by dropping
use of temporary flags.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

This is a preparational patch that just move
two functions and add one (for now unused) function.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Sam Ravnborg pointed out that Documentation/kbuild/makefiles.txt already
says this is what it's for.  This patch makes the reality live up to the
documentation.  This fixes the problem of LDFLAGS_BUILD_ID getting into too
many places.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

dep and dep2 in struct symbol was unused - remove them.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>

Roman Zippel wrote:
> A simple example would be
> help texts, right now they are per symbol, but they should really be per
> menu, so archs can provide different help texts for something.

This patch does this and at the same time introduce a few API
funtions used to access the help text.

The relevant api functions are introduced in the various frontends.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>

I noticed, when running scripts/ver_linux on both a Gentoo system
and a Slackware system, that the line printing the C library
version looked a little odd. So I fixed it up to be in line with
all the rest.

  Old output:
    Linux C Library        > libc.2.5
  New output:
    Linux C Library        2.5
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

We already check and warn about section mismatches from vmlinux
(build as vmlinux.o) during first pass so skip the checks
during the 2nd pass where we process modules.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

struct apm_bios_info uses "unsigned short" and "unsigned long"
to mean u16 and u32 respectively.  Correct.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Make "struct ist_info" valid on both i386 and x86-64, and use the
structure by name in the setup code.  Additionally, "Intel SpeedStep
IST" is redundant, refer to it as IST consistently.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Fix missing letters in the structure members of struct efi_info.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

For APM calls, BX contains the device index, which is zero for
the system BIOS.  Disconnect requres BX = 0.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Starting with kernel 2.6.23-rc1, the i386 APM driver fails
on several of my machines with the message:

apm: BIOS not found

This happens because of a bug in the i386 boot code rewrite
from assembler to C. The original assembly code had the
following code in its APM BIOS presence test (boot/setup.S):

	andw	$0x02, %cx			# Is 32 bit supported?
	je	done_apm_bios			# No 32-bit, no (good) APM BIOS

That is, the code bails out if bit 2 is zero.

In the new C version, this is coded as (boot/apm.c):

	if (cx & 0x02)		/* 32 bits supported? */
		return -1;

Here we see that the test has been accidentally inverted.

The fix is to negate the test. I've verified that this
allows the APM driver to work again on my affected machines.
Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  SELinux: null-terminate context string in selinux_xfrm_sec_ctx_alloc

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: Kconfig: remove CONFIG_ACPI_SLEEP from source
  ACPI: quiet ACPI Exceptions due to no _PTC or _TSS
  ACPI: Remove references to ACPI_STATE_S2 from acpi_pm_enter
  ACPI: Kconfig: always enable CONFIG_ACPI_SLEEP on X86
  ACPI: Kconfig: fold /proc/acpi/sleep under CONFIG_ACPI_PROCFS
  ACPI: Kconfig: CONFIG_ACPI_PROCFS now defaults to N
  ACPI: autoload modules - Create __mod_acpi_device_table symbol for all ACPI drivers
  ACPI: autoload modules - Create ACPI alias interface
  ACPI: autoload modules - ACPICA modifications
  ACPI: asus-laptop: Fix failure exits
  ACPI: fix oops due to typo in new throttling code
  ACPI: ignore _PSx method for hotplugable PCI devices
  ACPI: Use ACPI methods to select PCI device suspend state
  ACPI, PNP: hook ACPI D-state to PNP suspend/resume
  ACPI: Add acpi_pm_device_sleep_state helper routine
  ACPI: Implement the set_target() callback from pm_ops

Parse the machvec command line option outside of the early_param()
so that ia64_mv is set before any console intialisation that
may result from early_param parsing.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Fix wrong access to vector_table[].
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

This change fixes a panic when assign_irq_vector(irq) is called with
irq = AUTO_ASSIGN.
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Currently most of the m68knommu cpu/board setup files are handling
the setup of fixed boot parameters (via CONFIG_BOOTPARAM) themselves.
Move all this into the common setup code.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix types used for reset register address setup.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add configure support for the Intec Wildfire and WildFireMod boards.
Signed-Off-By: Steve Bennett <steveb@workware.net.au>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It is useless to preserve THREAD_SR in `resume'.  The real user's sr
is actually in the stack.  We also don't need to disable interrupts :
we'll never be in an invalid state, the sp switch is atomic.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Need an include/asm-m68knommu/hw_irq.h for kernel/hrtimer.c
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix a small typo in the definition of MCFDMA_DIR_INV (MCF5272 specific).
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add build support for the new Arcturus boards.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Need to explicitly include linux/device.h.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

CLOCK_TICK_RATE should give the underlying frequency of the tick timer,
to make ntp happy.  For Coldfires, that's the main clock.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add configure support for the Arcturus UC5272 and UC5282 boards.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix workqueues in 68328 serial driver.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove the legacy power management code from the 68328 serial driver.
It is not used, and there is no current kernel support for power
management on the 68328.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
  KVM: disable writeback for 0x0f 0x01 instructions.
  KVM: Fix removal of nx capability from guest cpuid
  Revert "KVM: Avoid useless memory write when possible"
  KVM: Fix unlikely kvm_create vs decache_vcpus_on_cpu race
  KVM: Correctly handle writes crossing a page boundary

This avoids xtime lag seen with dynticks, because while 'xtime' itself
is still not updated often, we keep a 'xtime_cache' variable around that
contains the approximate real-time that _is_ updated each time we do a
'update_wall_time()', and is thus never off by more than one tick.

IOW, this restores the original semantics for 'xtime' users, as long as
you use the proper abstraction functions (ie 'current_kernel_time()' or
'get_seconds()' depending on whether you want a timespec or just the
seconds field).

[ Updated Patch.  As penance for my sins I've also yanked another #ifdef
  that was added to avoid the xtime lag w/ hrtimers.  ]
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>