- 28 Feb, 2014 9 commits
-
-
Dean Anderson authored
Renaming s2255_channel and all instances of channel to vc (video channel). Signed-off-by:
Dean Anderson <linux-dev@sensoray.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Dean Anderson authored
Removal of unused and unnecessary s2255dma_queue structure. Signed-off-by:
-
Michael Opdenacker authored
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by:
Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Levente Kurusa authored
The check would check the pointer, which is never less than 0. According to the error message, the correct check would be to check the return value of ipipe_mode. Check that instead. Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
Levente Kurusa <levex@linux.com> Reviewed-by:
Josh Triplett <josh@joshtriplett.org> Signed-off-by:
-
Philipp Zabel authored
This patch enables the ioctl to create additional buffers on the videobuf2 capture queue. [laurent.pinchart@ideasonboard.com: Acquire privileges instead of just checking them in VIDIOC_CREATE_BUFS implementation] Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by:
-
Laurent Pinchart authored
The queue_setup handler takes an optional format argument that can be used to allocate buffers for a format different than the current format. The uvcvideo driver doesn't support changing the format when buffers have been allocated, but there's no reason not to support allocating buffers larger than the minimum size. When the format argument isn't NULL verify that the requested image size is large enough for the current format and use it for the buffer size. Signed-off-by:
-
Laurent Pinchart authored
videobuf2 already ensures that the number of buffers will not exceed VIDEO_MAX_FRAME, which is equal to our arbitraty limit of UVC_MAX_VIDEO_BUFFERS. Remove the duplicate check. Signed-off-by:
-
Thomas Pugliese authored
Isochronous endpoints on devices with speed == USB_SPEED_WIRELESS can have a max packet size ranging from 1-3584 bytes. Add a case to uvc_endpoint_max_bpi to handle USB_SPEED_WIRELESS. Otherwise endpoints for those devices will fall to the default case which masks off any values > 2047. This causes uvc_init_video to underestimate the bandwidth available and fail to find a suitable alt setting for high bandwidth video streams. Signed-off-by:
Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by:
-
Oliver Neukum authored
x < constant implies x + unsigned < constant That check just obfuscates the code Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
- 24 Feb, 2014 28 commits
-
-
Lad, Prabhakar authored
clk_set_rate(), clk_prepare_enable() functions can fail, so check the return values to avoid surprises. Signed-off-by:
-
Lad, Prabhakar authored
clk_set_rate(), clk_prepare_enable() functions can fail, so check the return values to avoid surprises. Signed-off-by:
-
Laurent Pinchart authored
When the input clock frequency is out of bounds for the PLL, bypass the PLL and just divide the input clock to achieve the requested output frequency. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
The sensor needs a master clock, handle it explictly in the driver. Signed-off-by:
-
Laurent Pinchart authored
The sensor needs two power supplies, VAA and VDD. Require a regulator for each of them. Signed-off-by:
-
Laurent Pinchart authored
The camera sensor will soon require regulators and clocks. Register fixed regulators for its VAA and VDD power supplies and a fixed rate clock for its master clock. Signed-off-by:
Igor Grinberg <grinberg@compulab.co.il> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Laurent Pinchart authored
A failure to locate the external subdev for a non memory-to-memory pipeline is a fatal error, don't ignore it. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Tested-by:
Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by:
-
Laurent Pinchart authored
Memory-to-memory pipelines have no external subdev, we shouldn't try to locate one and validate its configuration. The driver currently works by chance due to another bug that results in failure to locate the external subdev being ignored. This gets rid of the "omap3isp omap3isp: can't find source, failing now" error message in the kernel log when operating on a memory-to-memory pipeline. Signed-off-by:
-
Florian Vaussard authored
Commit 3fdfedaa "[media] omap3isp: preview: Lower the crop margins" accidentally changed the previewer's cropping, causing the previewer to miss four pixels on each line, thus corrupting the final image. Restored the removed setting. Cc: stable@vger.kernel.org Signed-off-by:
Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by:
-
Hans Verkuil authored
Drop the vid_limit module option: there is really no need to limit this. No other driver does that. If you try to allocate more buffers then vb2 will automatically reduce the number of buffers anyway. Also add sanity checks if the size in the fmt argument is going to be used and drop the code that checks against *nbuffers == 0: this can never happen (the vb2 framework ensures that) and the code was wrong anyway since *nbuffers should have been set to the minimum number of required buffers which is 1 for this driver. Since vivi is often used as a template driver it is good to have this driver be as compliant as possible. This broken code was for example copied to the s2255 driver (which is being fixed as well). Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
The sequence counting was not reset to 0 between each streaming run, and it was increased only every other frame. This is incorrect behavior: the confusion is with FIELD_ALTERNATE systems where each field is transmitted separately and only when both fields have been received is the frame sequence number increased. Signed-off-by:
-
Hans Verkuil authored
Add support for 32-bit ioctls with v4l-subdev device nodes. Rather than keep adding new ioctls to the list in v4l2-compat-ioctl32.c, just check if the ioctl is a non-private V4L2 ioctl and if so, call the conversion code. We keep forgetting to add new ioctls, so this is a more robust solution. In addition extend the subdev API with support for a compat32 function to convert custom v4l-subdev ioctls. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Hans Verkuil authored
The start_seq[] should be const. Signed-off-by:
-
Malcolm Priestley authored
Remove it9137 firmware files it9137.txt and it9137 get_dvb_firmware. dvb-usb-it9137-01.fw firmware is no longer in use. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Malcolm Priestley authored
This driver was removed, and supported devices got moved to anoher driver. So, cleanup MAINTAINERS as well. Signed-off-by:
-
Malcolm Priestley authored
This driver has been replaced by af9033 and tuner_it913x Signed-off-by:
-
Malcolm Priestley authored
Following moving ids to af9035. This driver is no longer in use. Signed-off-by:
-
Antti Palosaari authored
Some device vendors has forgotten set correct slave demod I2C address to eeprom. Use default I2C address when eeprom has no address at all. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Malcolm Priestley authored
As follow on to patch af9035: Move it913x single devices to af9035 and patch 1. SNR is reported as db/10 values. All dual ids are added to af9035 and it913x driver disabled. it913x/it913x-fe removal patches to follow. Signed-off-by:
-
Malcolm Priestley authored
On some devices the vendor has not set EEPROM_2ND_DEMOD_ADDR. Checks tmp is not zero after call to get EEPROM_2ND_DEMOD_ADDR and sets the default slave address of 0x3a on 0x9135 devices. Signed-off-by:
-
Malcolm Priestley authored
The generic v1 and v2 devices have been all tested. IDs tested USB_PID_ITETECH_IT9135 v1 & v2 USB_PID_ITETECH_IT9135_9005 v1 USB_PID_ITETECH_IT9135_9006 v2 Current Issues There is no signal on USB_PID_ITETECH_IT9135 v2 No SNR reported all devices. All single devices tune and scan fine. All remotes tested okay. Dual device failed to register second adapter USB_PID_KWORLD_UB499_2T_T09 It is not clear what the problem is at the moment. So only single IDs are transferred in this patch. Signed-off-by:
-
Antti Palosaari authored
Fix some coding style issues, mostly reported by checkpatch.pl. Signed-off-by:
-
Antti Palosaari authored
Tuner PLL lock flag was mapped to FE_HAS_SIGNAL, which is wrong. PLL lock has nothing to do with received signal. In real life that flag is always set. Signed-off-by:
-
Dan Carpenter authored
"ret" is an error code here, we already tested that. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Till Dörges authored
I've got the following DAB USB stick that also works fine with the DVB_USB_RTL28XXU driver after I added its USB ID: Bus 001 Device 009: ID 0ccd:00b4 TerraTec Electronic GmbH [crope@iki.fi: apply patch partly manually] Signed-off-by:
Till Dörges <till@doerges.net> Signed-off-by:
-
Antti Palosaari authored
Add missing m88ts2022 module reference counts as removing that module is not allowed when it is used by em28xx-dvb module. That same module was not unregistered correctly, fix it too. Error cases validated by returning errors from m88ds3103, m88ts2022 and a8293 probe(). Signed-off-by:
-
- 07 Feb, 2014 1 commit
-
-
Mauro Carvalho Chehab authored
There are several left overs with my old email address. Remove their occurrences and add myself at CREDITS, to allow people to be able to reach me on my new addresses. Signed-off-by:
-
- 06 Feb, 2014 2 commits
-
-
Mauro Carvalho Chehab authored
Adds a missing section to describe the remote controller interface. The DocBook is just addin the same documentation as written at Documentation/ABI/testing/sysfs-class-rc, using the DocBook's way, and dropping timestamps/contact info. While that means that we'll have the same info on two parts, there are parts of the remote controller interface that doesn't belong at Documentation/ABI/, and it makes sense to have everything on the same place. This also means that we'll need to manually track to be sure that both places will be synchronized, but, as it is not expected much changes on it, this sync can be done manually. It also adds an introduction that states that the IR is a normal evdev/input interface, plus the sysfs class nodes. Signed-off-by: -
Mauro Carvalho Chehab authored
All chapters/parts but Remote controllers have the revision tags inside the body. Move those to remote_controllers.xml and do some cleanup. No functional changes. Signed-off-by:
-
