is_state_active_or_queued() actually returns true if the buffer's state
is neither active nore queued. Rename it for clarity.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

IS_ERR_VALUE() assumes that its parameter is an unsigned long.
It can not be used to check if an unsigned int reflects an error.
Doing so can result in the following build warning.

drivers/media/platform/soc_camera/atmel-isi.c:
	In function "atmel_isi_probe":
	include/linux/err.h:21:38: warning:
		comparison is always false due to limited range of data type
drivers/media/platform/soc_camera/atmel-isi.c:1089:6: note:
	in expansion of macro "IS_ERR_VALUE"

If that warning is seen, the return value from platform_get_irq() is not
checked for errors.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Convert pxa_camera to dmaengine. This removes all DMA registers
manipulation in favor of the more generic dmaengine API.

The functional level should be the same as before. The biggest change is
in the sg_split() function, which splits a videobuf-dma into several
scatterlists for 3 planes captures (Y, U, V).
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
[g.liakhovetski@gmx.de: fix a function prototype, use bool, struct init]
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

This moves the dma irq handling functions up in the source file, so that
they are available before DMA preparation functions. It prepares the
conversion to DMA engine, where the descriptors are populated with these
functions as callbacks.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

In preparation for dmaengine conversion, move the camera interrupt
handling into a tasklet. This won't change the global flow, as this
interrupt is only used to detect the end of frame and activate DMA fifos
handling.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Fix the error path where the video buffer wasn't allocated nor
mapped. In this case, in the driver free path don't try to unmap memory
which was not mapped in the first place.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The mx3_camera driver prints DMA addresses using the "%x" format
string, which is wrong when using a 64-bit dma_addr_t definition:

media/platform/soc_camera/mx3_camera.c: In function 'mx3_cam_dma_done':
media/platform/soc_camera/mx3_camera.c:149:125: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t {aka long long unsigned int}' [-Werror=format=]
media/platform/soc_camera/mx3_camera.c: In function 'mx3_videobuf_queue':
media/platform/soc_camera/mx3_camera.c:317:119: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t {aka long long unsigned int}' [-Werror=format=]
media/platform/soc_camera/mx3_camera.c: In function 'mx3_videobuf_release':
media/platform/soc_camera/mx3_camera.c:346:119: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t {aka long long unsigned int}' [-Werror=format=]

This changes the code to use the special %pad format string, which
always does the right thing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

This patch adds ARGB8888 capture format support for R-Car Gen3.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Add support for Intel R200 depth camera in uvc driver.
This includes adding new uvc GUIDs for the new pixel formats,
adding new V4L pixel format definition to user api headers,
and updating the uvc driver GUID-to-4cc tables with the new formats.
Tested-by: Greenberg, Aviv D <aviv.d.greenberg@intel.com>
Signed-off-by: Aviv Greenberg <aviv.d.greenberg@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Add documentation for 3 formats, used by RealSense cameras like R200.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

There's no reason to implement its own function to create the
media graph. So, use the core one.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

As we want au0828 to use the core function to create the MC
graphs, use enum demod_pad_index instead of
enum au8522_media_pads.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The device initialization completes only after calling
input_register_device(). However, rc_open() can be called while
the device is being registered by the input/evdev core. So, we
can't expect that rc_dev->initialized to be true.

Change the logic to don't require initialized == true at rc_open
and change the type of initialized to be atomic.

this way, we can check for it earlier where it is really needed,
without needing to lock the mutex just for testing it.

Tested with nuvoton_cir driver on a NUC5i7RYB with CIR integrated on it.
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Make the base offset hexadecimal to simplify debugging since the base
addresses are hex too.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

We need to import the changes at media.h, as we have a
followup patch that depends on it.

* v4l_for_linus:
  [media] media.h: use hex values for range offsets,  move connectors base up.
  [media] adv7604: fix tx 5v detect regression

Make the base offset hexadecimal to simplify debugging since the base
addresses are hex too.

The offsets for connectors is also changed to start after the 'reserved'
range 0x10000-0x2ffff.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Fix these compiler warnings:

media-git/include/media/media-device.h: In function 'media_device_pci_init':
media-git/include/media/media-device.h:610:9: warning: 'return' with a value, in function returning void
  return NULL;
         ^
media-git/include/media/media-device.h: In function '__media_device_usb_init':
media-git/include/media/media-device.h:618:9: warning: 'return' with a value, in function returning void
  return NULL;
         ^
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

We can only unlock if mutex_lock() succeeds.

Fixes the following warning:
	drivers/media/rc/lirc_dev.c:535 lirc_dev_fop_close() error: double unlock 'mutex:&lirc_dev_lock'
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of having the timeouts hardcoded, and getting only the
accel value from the array, put everything in the same place.

That simplifies the logic.

As a side effect, it also cleans several smatch errors:
	include/linux/jiffies.h:359:41: error: strange non-value function or array
	include/linux/jiffies.h:361:42: error: strange non-value function or array
(one per time_after/time_before line)
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

As warned by smatch:
	drivers/media/pci/pt3/pt3.c:398 pt3_attach_fe() error: strncmp() '"tc90522sat"' too small (11 vs 20)

Clearly, the logic is doing the wrong thing, as it is not comparing the strings
on the right way.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

As warned by smatch:
	drivers/media/usb/dvb-usb/technisat-usb2.c:263 technisat_usb2_set_led() error: doing dma on the stack (led)
	drivers/media/usb/dvb-usb/technisat-usb2.c:280 technisat_usb2_set_led_timer() error: doing dma on the stack (&b)
	drivers/media/usb/dvb-usb/technisat-usb2.c:341 technisat_usb2_identify_state() error: doing dma on the stack (version)
	drivers/media/usb/dvb-usb/technisat-usb2.c:609 technisat_usb2_get_ir() error: doing dma on the stack (buf)
	drivers/media/usb/dvb-usb/technisat-usb2.c:619 technisat_usb2_get_ir() error: doing dma on the stack (buf)

Create a buffer at the device state and use it for all the DMA
transfers.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Smatch with -pkernel --no-data keeps complaining about rf_ramp:
	drivers/media/dvb-frontends/dib0090.c:1119 dib0090_pwm_gain_reset() error: we previously assumed 'state->rf_ramp' could be null (see line 1086)
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

While there's no risk of divison by zero, the logic there is akward, as it
does the calculus for the numerator and denominator before checking
if this will be used.

Change the order to check first if the denominator is zero, and only
calculating the numerator/denominator if not.

This should also avoid those smatch errors:
	drivers/media/dvb-frontends/drx39xyj/drxj.c:9605 ctrl_get_qam_sig_quality() debug: sval_binop_unsigned: divide by zero
	drivers/media/dvb-frontends/drx39xyj/drxj.c:9605 ctrl_get_qam_sig_quality() debug: sval_binop_unsigned: divide by zero
	drivers/media/dvb-frontends/drx39xyj/drxj.c:9605 ctrl_get_qam_sig_quality() debug: sval_binop_unsigned: divide by zero
	drivers/media/dvb-frontends/drx39xyj/drxj.c:9605 ctrl_get_qam_sig_quality() debug: sval_binop_unsigned: divide by zero
	drivers/media/dvb-frontends/drx39xyj/drxj.c:9605 ctrl_get_qam_sig_quality() debug: sval_binop_unsigned: divide by zero
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

As warned by smatch:
	drivers/media/usb/airspy/airspy.c:541 airspy_start_streaming() warn: test_bit() takes a bit number
	drivers/media/usb/airspy/airspy.c:569 airspy_start_streaming() warn: test_bit() takes a bit number
	drivers/media/usb/airspy/airspy.c:605 airspy_stop_streaming() warn: test_bit() takes a bit number

set_bit/clear_bit argument is the bit number, and not 1 << bit.

Thankfully, one of the bits was not used (URB_BUF), with would
otherwise cause a driver misfunctioning.

Clean this mess by always using set_bit/clear_bit/test_bit and
removing the unused bit.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Remove the unused ovfx2_vga_mode/ovfx2_cif_mode arrays from the ov519
driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Fix the ov519 driver not working (unable to talk to the sensor) when
plugged into a xhci host. The root cause here is that uhci/ohci/ehci
hosts typically will send any pending async requests every milli-second
and then go to sleep for the rest if the milli-second, where as xhci hosts
send them immediately, causing things to go too fast for the ov519 bridge.

This commit adds a few delays fixing this.
Signed-off-by: Wesley Post <pa4wdh@xs4all.nl>
[hdegoede@redhat.com: Also add delays to w996Xcf.c, as that needs them too]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

On my bttv card "Hauppauge WinTV [card=10]" capturing in YV12 fmt at max
size results in a solid green rectangle being captured (all colors 0 in
YUV).

This turns out to be caused by max-width (924) not being a multiple of 16.

We've likely never hit this problem before since normally xawtv / tvtime,
etc. will prefer packed pixel formats. But when using a video card which
is using xf86-video-modesetting + glamor, only planar XVideo fmts are
available, and xawtv will chose a matching capture format to avoid needing
to do conversion, triggering the solid green window problem.

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Change au0828 to check if tuner is free or not before changing tuner
configuration.

vidioc_g_tuner(), and au0828_v4l2_close() now call v4l-core interface
v4l_enable_media_source() before changing tuner configuration.

Remove au0828_enable_analog_tuner() as it is no longer needed because
v4l2-core implements common interfaces to check for media source
availability.

In addition, queue_setup() no longer needs the tuner availability check
since v4l2-core does it.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Change dvb frontend to check if tuner is free when device opened in RW
mode.

Call to enable_source handler either returns with an active pipeline to
tuner or error if tuner is busy.

Tuner is released when frontend is released calling the disable_source
handler.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Add enable_source and disable_source handlers. The enable source handler
is called from v4l2-core, dvb-core, and ALSA drivers to check if the
shared media source is free.

The disable source handler is called to release the shared media
source.

[mchehab@osg.samsung.com: fix merge conflicts]
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Register entity_notify async hook to create links between existing
bridge driver entities and a newly added non-bridge driver entities. For
example, this handler creates link between V4L decoder entity and ALSA
mixer entity.

[mchehab@osg.samsung.com: fix merge conflicts and make
 au0828_media_graph_notify static to shut up a warning]
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Change au0828_create_media_graph() to find and disable
tuner and demod link. This helps avoid an additional
disable step when tuner is requested by video or audio.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Create tuner to demod pad link in disabled state to avoid disable step
when tuner resource is requested by dvb.

[mchehab@osg.samsung.com: fix a merge conflict]
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Media device initialization and registration steps are split. There is a
window between media device init and media device register during usb
probe.

au0828 bridge driver and snd-usb-audio could try to initialize the media
device, if they simply checked, whether the device has been registered.
They also need to check whether the device has been initialized.

Change the au0828-core to check if media device is already initialized
during initialization step and check if media device is already
registered during the registration step.

[mchehab@osg.samsung.com: fix a merge conflict]
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Change au0828 to use Managed Media Controller API to share media device
and coordinate creating/deleting the shared media device with the
snd-usb-audio driver. The shared media device is created as device
resource of the parent usb device of the two drivers.

Populate media device model with USB Device product name instead of
au0828 device board name. This change is necessary because, if the media
device is registered by the snd-usb-audio driver first, and it doesn't
know the au0828 board name.

[mchehab@osg.samsung.com: Fix merge conflicts]
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Change s_input, s_fmt, s_tuner, s_frequency, querystd, s_hw_freq_seek,
and vb2_core_streamon interfaces that alter the tuner configuration to
check if it is free, by calling v4l_enable_media_source().

If source isn't free, return -EBUSY.

v4l_disable_media_source() is called from v4l2_fh_exit() to release
tuner (source).

vb2_core_streamon() uses v4l_vb2q_enable_media_source().
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Change au0828-core to use au8522_media_pads enum defines
instead of hard-coding the pad values.

[mchehab@osg.samsung.com: patch rebased, as the code was
 moved to au0828-video.c. Also added AU8522_PAD_INPUT to the list
 of pad number replacements]
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Add new pad for ALSA Audio Out to au8522_media_pads.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Move the au8522_media_pads enum to au8522.h from au8522_priv.h to export
them. This will allow au0828-core to use these defines instead of
hard-coding them them.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Add a new interfaces to be used by v4l-core to invoke enable
source and disable_source handlers in the media_device. The
enable_source helper function invokes the enable_source handler
to find media source entity connected to the entity and check
is it is available or busy. If source is available, link is
activated and pipeline is started. The disable_source helper
function invokes the disable_source handler to deactivate and
stop the pipeline.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>