- 19 Sep, 2009 40 commits
-
-
Akihiro Tsukada authored
This patch adds driver for 774 Friio White, ISDB-T USB receiver Friio White is an USB 2.0 ISDB-T receiver. (http://www.friio.com/) The device has a GL861 chip and a Comtech JDVBT90502 canned tuner module. This driver ignores all the frontend_parameters except frequency, as ISDB-T shares the same parameter configuration across the country and thus the device can work like an intelligent one. As this device does not include a CAM nor hardware descrambling feature, the driver passes through scrambled TS streams. There is Friio Black, a variant for ISDB-S, which shares the same USB Vendor/Product ID with White, but it is not supported in this driver. They should be identified in the initialization sequence, but this feature is not tested. Signed-off-by:
Akihiro Tsukada <tskd2@yahoo.co.jp> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
Add a driver for Earthsoft PT1 Eearthsoft PT1 is a PCI card for Japanese broadcasting with two ISDB-S and ISDB-T demodulators. This card has neither MPEG decoder nor conditional access module onboard. It transmits only compressed and possibly encrypted MPEG data over the PCI bus, so you need an external software decoder and a decrypter to watch TV on your computer. This driver is originally developed by Tomoaki Ishikawa <tomy@users.sourceforge.jp> by reverse engineering. [mchehab@redhat.com: renamed isdb_ts to isdbs_ts to use the current standard] Signed-off-by:
HIRANO Takahito <hiranotaka@zng.info> Signed-off-by:
-
HIRANO Takahito authored
In ISDB-S, time-devision duplex is used to multiplexing several waves in the same frequency. Each wave is identified by its own transport stream ID, or TS ID. We need to provide some way to specify this ID from user applications to handle ISDB-S frontends. This code has been tested with the Earthsoft PT1 driver. [mchehab@infradead.org: Fix merge conflicts with isdbt and rename the new parameter to DTV_ISDBS_TS_ID] Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/video/gspca/gl860/gl860.c: In function ‘gl860_build_control_table’: drivers/media/video/gspca/gl860/gl860.c:119: warning: ‘sd_ctrls’ may be used uninitialized in this function Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/video/saa7164/saa7164-buffer.c: In function ‘saa7164_buffer_alloc’: drivers/media/video/saa7164/saa7164-buffer.c:110: warning: cast to pointer from integer of different size drivers/media/video/saa7164/saa7164-buffer.c:112: warning: cast to pointer from integer of different size Signed-off-by: -
Muralidharan Karicheri authored
Following changes done for vpif driver to support vpif capture:- 1) Current version of display driver defined vpif register space as part for vpif display platform driver resource This is not correct since vpif is common across capture and display drivers. So the resource iomap function is moved to this module 2) Since there are common registers, a spinlock is added for mutual exclusion. This has incorporated comments against version v0 of the patch series Resending to merge to V4L linux-next Reviewed-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by:
-
Muralidharan Karicheri authored
This is the vpif capture bridge driver for DM6467. This video supports two video channels each having a tvp5147 device at the input. This allows simultaneous capture of NTSC/PAL video in each of this channel. Both MMAP and USERPTR io mechanism are supported. Currently buffer allocation happens at REQBUF ioctl request. Since USERPTR IO is supported, this is not an issue since user applications can allocate buffers and pass the user space address to the driver. Following are TODOs :- 1) Adding support for allocation of buffers at init 2) VBI/HBI data service This has incorporated comments received against version v0 of the patch series. Resending to merge V4l linux-next create mode 100644 drivers/media/video/davinci/vpif_capture.c create mode 100644 drivers/media/video/davinci/vpif_capture.h Reviewed-by:
-
Muralidharan Karicheri authored
Adds Kconfig and Makefile changes required for vpif capture driver Resending to merge to V4L linux-next Reviewed-by:
-
Muralidharan Karicheri authored
The structure name for vpif display driver changed since it was not unique. So this update is done to reflect the same. Also removed the code related to register address space iomap. Uses v4l2_i2c_new_subdev_board() instead of v4l2_i2c_new_probed_subdev() so that platform data can be added for subdevice configuration for polarities. This has incorporated comments against version v0 of the patch series. Resending the original patch for merge to V4L linux-next Reviewed-by:
-
Hans Verkuil authored
Warn when the desired device node number is already in use, except when the new video_register_device_no_warn function is called since in some use-cases that warning is not relevant. Signed-off-by:
-
Hans Verkuil authored
There are some subtle differences in the way the devnode numbers are handled depending on whether the FIXED_MINOR_RANGES config option is set. Add some simple wrapper functions to handle that correctly. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
The term 'kernel number' is very vague, so replace it with the somewhat more descriptive term 'device node number'. In one place the local variable 'nr' was used to create the device node number of the new device name. This has been replaced with the vdev->num field to more clearly mark this as being the device node number and not the minor number. Signed-off-by:
-
Hans Verkuil authored
video_register_device_index is never actually called, instead the stream index number is always calculated automatically. This patch removes this function and simplifies the internal get_index function since that can now always just return the first free index. Signed-off-by:
-
Hans Verkuil authored
Rewrite v4l2_i2c_new_subdev as a simplified version of v4l2_i2c_new_subdev_cfg and remove v4l2_i2c_new_probed_subdev and v4l2_i2c_new_probed_subdev_addr. This simplifies this API substantially. Signed-off-by:
-
Guennadi Liakhovetski authored
Since we are not using v4l2_device_call_* calls any more, we don't need to initialise subdevice .grp_id any more. This also fixes compiler warnings on 64-bit platforms. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Guennadi Liakhovetski authored
This makes the soc-camera interface for V4L2 subdevices thinner yet. Handle gain and exposure internally in each driver just like all other controls. Signed-off-by:
-
Guennadi Liakhovetski authored
Remove unneeded soc-camera operations, this also makes the soc-camera API to v4l2 subdevices thinner. Signed-off-by:
-
Guennadi Liakhovetski authored
The initial soc-camera scaling and cropping implementation turned out to be incompliant with the V4L2 API, e.g., it expected the user to specify cropping in output window pixels, instead of input window pixels. This patch converts the soc-camera core and all drivers to comply with the standard. Signed-off-by:
-
Guennadi Liakhovetski authored
Signed-off-by:
-
Guennadi Liakhovetski authored
Signed-off-by:
-
Guennadi Liakhovetski authored
Signed-off-by:
-
Guennadi Liakhovetski authored
Use v4l2_subdev_call() instead of v4l2_device_call_until_err() in all host drivers and in soc-camera core. Signed-off-by:
-
Guennadi Liakhovetski authored
Remove set_crop soc-camera device method and switch to s_crop from v4l2-subdev video operations. Also extend non-i2c drivers to also hold a pointer to their v4l2-subdev instance in control device driver-data, i.e., in dev_get_drvdata((struct device *)to_soc_camera_control(icd)) Signed-off-by:
-
Guennadi Liakhovetski authored
Use host-side image scaling when the client fails to set the requested format. We also have to take scaling into account when performing host-side cropping. Similar to cropping we try to use client-side scaling as much as possible to preserve bus bandwidth and optimise the frame-rate. Signed-off-by:
-
Guennadi Liakhovetski authored
The current tw9910 driver does not implement cropping correctly. Therefore, and also because various rectangles in struct soc_camera_device are in user scale, we cannot and shall not use rect_current as window location. Signed-off-by:
-
Guennadi Liakhovetski authored
OV772x sensors cannot crop, they only support two fixed formats: VGA and QVGA. We should not change the format when requested to crop, only S_FMT can do this. Signed-off-by:
-
Guennadi Liakhovetski authored
Prohibit S_FMT and S_CROP with a different window width or height after video buffer initialisation. This simplifies the work to be done in specific host and client drivers, and it doesn't seem to make much sense to allow these changes. We do however allow S_CROP with equal width and height to just move the window, this doesn't affect video buffer management and is usually easy enough to implement. Signed-off-by:
-
Guennadi Liakhovetski authored
V4L2 API mandates, that drivers do not update the argument of the S_CROP ioctl() with the actual geometry. Comply. Signed-off-by:
-
Guennadi Liakhovetski authored
Signed-off-by:
-
Guennadi Liakhovetski authored
Not all video capture devices can configure arbitrary cropping, whereas the CEU module on SuperH CPUs can crop with pixel precision. However, we want to use camera cropping if possible to save bandwidth and increase the frame-rate. This patch verifies whether the camera managed to crop exactly the requested rectangle, and if not, uses host-side cropping. To be able to crop on CEU we have to preserve camera rectangle too, for which the host_priv member in struct soc_camera_device is used. We now allocate memory dynamically, thus we have to use the .put_formats() method from struct soc_camera_host_ops to free it. Signed-off-by:
-
Guennadi Liakhovetski authored
Remove .set_std() method from struct soc_camera_ops, use .s_std() from struct v4l2_subdev_core_ops instead. Signed-off-by:
-
Guennadi Liakhovetski authored
Patch [PATCH] video: use videobuf_waiton() in sh_mobile_ceu free_buffer() was not quite correct. It closed a race, but introduced a potential lock-up, if for some reason an interrupt does not come. This has been observed in tests with tw9910. This patch safely dequeues buffers without waiting for their completion. It also moves a buffer state assignment under a spinlock to make it atomic with queuing of the buffer. Signed-off-by:
-
Guennadi Liakhovetski authored
The move of format translation initialisation into soc_camera_open() was temporary for the soc-camera as platform driver intermediate step, put it back into soc_camera_probe(). Also add a .put_formats() method to soc_camera_host_ops to free any resources host driver might have allocated in .get_formats(). Signed-off-by:
-
Guennadi Liakhovetski authored
V4L2 drivers are allowed to configure a geometry different than what has been requested by the user with S_CROP, but then they have to adjust the input rectangle accordingly. Fix ov772x to comply with this requirement. Signed-off-by:
-
Guennadi Liakhovetski authored
1. soc-camera always requests a valid rectangle, when calling .s_fmt(), no need to check and adjust 2. in .s_crop(), if the rectangle exceeds sensor limits, push it to the respective border instead of centering 3. take into account left and top borders when checking Signed-off-by:
-
Guennadi Liakhovetski authored
Signed-off-by:
-
Guennadi Liakhovetski authored
Switch to using struct v4l2_rect in struct soc_camera_device for uniformity and simplicity. Signed-off-by:
-
Guennadi Liakhovetski authored
Use the V4L2_CID_SHARPNESS control to switch SH-mobile camera low-pass filter. Signed-off-by:
-
Guennadi Liakhovetski authored
Until now soc-camera only supported client (sensor) controls. This patch enables camera-host drivers to implement their own controls too. Signed-off-by:
-
