prosavage_remove() is called during init, so it shouldn't be
marked as exit code.  (It matters when CONFIG_HOTPLUG=n.)

This patch updates the sysfs names of the w83627hf driver
to match the new standard.  The patch applies on top of
one recently applied to your tree [1].  I have tested it
using a w83627thf & the latest lm_sensors CVS.  Please apply.

[1] http://archives.andrew.net.au/lm-sensors/msg06746.html

i2c_use_client() contains a bogosity.  If i2c_inc_use_client() returns
success, i2c_use_client() returns an error.  If i2c_inc_use_client()
fails, i2c_use_client() might succeed.

Fix it so that (a) we get the correct sense between these two functions,
and (b) propagate the error code from i2c_inc_use_client(), rather than
making our own one up.

Looks like i2c-dev suffers the same problem with dev_dbg as i2c-core did
twice. Here is a patch that fixed a oops I and another user were
experiencing when running sensors-detect.

The attached patch updates wanXL card driver. Please apply to Linux 2.6.
Thanks.

Changes:
* fixed initialization kernel panic, introduced with recent alloc_netdev()
  wan patch,
* wanxl_rx_intr() port# now checked before accessing port structure,
* cleanups etc.
--
Krzysztof Halasa, B*FH

* Add National DP83840 PHY rev b/c setup.  Only rev a was being setup.

From: Joe Perches <joe@perches.com>

Use %08llx for a dma_addr_t, not the recently-added %llx.

The carmel driver will want to use this rather
than muck around in queue internals directly.

Declarations come before statements, please.

Current gcc warns about this too, bless them:

crypto/arc4.c: In function `arc4_crypt':
crypto/arc4.c:65: warning: ISO C90 forbids mixed declarations and code

From: Zwane Mwaikambo <zwane@linuxpower.ca>

It looks like a block request snuck through before we had initialised the
motor_off_timer timers.  So I pushed the timer init earlier.

From: Marc-Christian Petersen <m.c.p@wolk-project.de>

OSS Sound Driver Forte needs ac97_codec.

drivers/i2c/busses/i2c-elv.c: In function `i2c_bitelv_init':

drivers/i2c/busses/i2c-elv.c:155: warning: unsigned int format, long int arg (arg 2)
drivers/i2c/busses/i2c-elv.c:155: warning: unsigned int format, long int arg (arg 2)
drivers/i2c/busses/i2c-velleman.c: In function `i2c_bitvelle_init':
drivers/i2c/busses/i2c-velleman.c:141: warning: unsigned int format, long int arg (arg 2)
drivers/i2c/busses/i2c-velleman.c:141: warning: unsigned int format, long int arg (arg 2)

From: David Joerg <davidjoerg@web.de>

Fix the description of the IO ports for the IDE primary and secondary
interfaces.

From: Aneesh Kumar KV <aneesh.kumar@digital.com>

We need to set the tasks's exit code prior to waking it, not afterwards.

Acked by rth.

Dave Kleikamp <shaggy@austin.ibm.com> points out a race between
nobh_prepare_write() and end_buffer_read_sync().  end_buffer_read_sync()
calls unlock_buffer(), waking the nobh_prepare_write() thread, which
immediately frees the buffer_head.  end_buffer_read_sync() then calls
put_bh() which decrements b_count for the already freed structure.  The
SLAB_DEBUG code detects the slab corruption.

We fix this by giving nobh_prepare_write() a private buffer_head end_o
handler which doesn't touch the buffer's contents after unlocking it.

From: Eric Sandeen <sandeen@sgi.com>

Several functions in buffer.c are using unsigned long where they should be
using sector_t.

Also, use pgoff_t in several places so it is easier to tell what is beingused
as a pagecache index, what is being used as a disk index and what is being
used as an offset-into-page.

If a large pci_alloc_consistent() GFP_ATOMIC allocation fails this driver's
recovery code will call emu10k1_wavein_close() far earlier than it should: it
goes splat in emu10k1_timer_uninstall().

Fix it by simply removing that call: we haven't allocated any resources yet
anyway.

Note that one of the callers of emu10k1_wavein_open(), emu10k1_audio_read()
will sit there stupidly retrying the open.  But it has a sleep in there so
something might eventually give way.

From: Markus Lidel <Markus.Lidel@shadowconnect.com>

drivers/message/i2o/i2o_block.c:

 - corrected the initialization sequence of the request queues.

 - added initialization to queue spinlocks.

 - release device in i2o_scan because else the device could not be queried.

 - i2o_block event threads wait on signal KILL but signal TERM was sent.

drivers/message/i2o/i2o_core.c:

 - set the HRT length to 0 at initialization, to avoid calling free on
   unallocated memory.

 - i2o_core event threads wait on signal KILL but signal TERM was sent.

 - added a limit of 3 tries to get the HRT from the controller.

 - removed the dpt parameter, which was used to force DPT controllers get
   handled by the i2o driver.  Now all available i2o controllers will be
   handled by this driver.

drivers/message/i2o/i2o_scsi.c:

 - beautifying of printk calls.

 - added scsi_unregister to properly clean up on module unload.

drivers/message/i2o/Kconfig:

 - added help for i2o_block and i2o_scsi to describe the differences between
   the two drivers.

include/linux/i2o-dev.h:

 - cleaned typo "tate" into "state".

include/linux/i2o.h:

 - removed defines from i2o_block and insert it here.

(Acked by Alan)

From: Gerd Knorr <kraxel@bytesex.org>

This patch fixes a bug in the v4l1-compat module and makes it pass the
correct buffer type to the v4l2 driver on VIDIOC_STREAM(ON|OFF) ioctls.

From: Arjan van de Ven <arjanv@redhat.com>

From: Chris Mason <mason@suse.com>

find_group_other looks buggy for ext2 and ext3 in 2.6, it can cause -ENOSPC
errors when the fs has plenty of free room.

To hit the bug, you need a filesystem where:

parent_group has no free blocks (but might have free inodes) Every other
group with free inodes has no free blocks.

That gets you down to the final linear search in find_group_other.  The
linear search has two bugs:

group = parent_group + 1; means we start searching at parent_group + 2
because the loop increments group before using it.

for(i = 2 ; i < ngroups ; i++) means we don't search through all the
groups.

The end result is that parent_group and parent_group + 1 are not checked
for free inodes in the final linear search.  ext3 has the same problem.

From: Andreas Kies <andikies@t-online.de>

Fix improperly handled 16 bit sample size.  If you use an odd number of
bytes in 16 bit mode the driver fails to work.

In file included from drivers/misc/ibmasm/uart.c:27:
include/linux/serial_core.h: In function `uart_handle_dcd_change':
include/linux/serial_core.h:407: `TASK_INTERRUPTIBLE' undeclared (first use in this function)

From: Christoph Hellwig <hch@lst.de>

sleep_on hurts my eyes and this offender is compltely unused, so..

From: Arnd Bergmann <arnd@arndb.de>

This use of deprecated struct initializers was hidden behind macro magic
and has appearantly not been noticed before.

From: "Jim Gifford" <maillist@jg555.com>

Prevent initrd from being built if ram device is built as a module.

From: "Randy.Dunlap" <rddunlap@osdl.org>

From: Tony Breeds <tony@bakeyournoodle.com>

It fixes 3 places where the ioctl returns positives instead of negatives.
I've gotten feedback from the maintainer (Rogier Wolff (sp?) and he has no
objections.

From: Arnd Bergmann <arnd@arndb.de>

The wrong argument in put_compat_timespec is marked const, causing
unnecessary compiler warnings.

From: David Gibson <david@gibson.dropbear.id.au>

Converts the mm_context_t on ppc64 to be a struct.  This lets us separate
the low_hpages flag into a separate field rather than folding it into the
actual context id.  That makes things neater, since the flag is
conceptually separate and has, for example, should be propogate across a
fork whereas the context ID obviously isn't.  The mm_context_id is the only
place to put arch-specific information in the mm_struct.

This patch will also make some interesting extensions to the hugepage
support much easier, such as allowing dynamic resizing of the hugepage
address space, or using special pagetables for hugepages.

From: Stephen Rothwell <sfr@canb.auug.org.au>

This patch adds the virtual cdrom driver for PPC64 iSeries.

From: Stephen Rothwell <sfr@canb.auug.org.au>

This patch declares iSeries_vio_dev in an include file and includes it where
necessary.  It also fixes arch/ppc64/kernel/mf.c to use the generic dma API
with iSeries_vio_dev.

From: Olof Johansson <olof@austin.ibm.com>

Below patch makes xmon survive a softreset invokation (and quite likely
invocations because of other traps as well).

From: Gerd Knorr <kraxel@suse.de>

Current gcc's error out if a function's declaration and definition disagree
about the register passing convention.

The patch adds a new `fastcall' declatation primitive, and uses that in all
the FASTCALL functions which we could find.  A number of inconsistencies were
fixed up along the way.

From: Jakub Bogusz <qboosh@pld-linux.org>

drivers/sbus/char/vfc_dev.c: In function `vfc_mmap':
drivers/sbus/char/vfc_dev.c:623: error: dereferencing pointer to incomplete type

From: Joe Thornber <thornber@redhat.com>

Remove the version-1 ioctl interface.

From: "J. Bruce Fields" <bfields@fieldses.org>

I've done some testing with 2.6.4-rc1.  It looks fine, except that one
critical patch got dropped somewhere along the way, without which
rpcsec_gss will oops.

We've changed gss_get_mic to write mic in place instead of kmalloc'ing new
memory for it; change must also be reflected in server side code.

Here's a fix for an obvious typo in changeset
neilb@cse.unsw.edu.au|ChangeSet|20040305155724|31191
that was causing ESTALE errors galore on my NFS testrig.

This fixes a problem with creating symlinks, a few fields in the
inode/dentry were left uninitialized.

into ppc970.osdl.org:/home/torvalds/v2.5/linux