An error occurred fetching the project authors.
- 31 Jul, 2023 18 commits
-
-
Alexandre Mergnat authored
The Startek KD070FHFID015 is a 7-inch TFT LCD display with a resolution of 1024 x 600 pixels. Reviewed-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230711-startek_display-v4-1-fb1d53bfdef6@baylibre.com
-
Matus Gajdos authored
Add support for TDO TL050HDV35-H1311A LCD panel. Signed-off-by:
Matus Gajdos <matuszpd@gmail.com> Reviewed-by:
-
Matus Gajdos authored
Add support for TDO TL050HDV35-H1311A LCD panel. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Dmitry Baryshkov authored
Specify bpc value for the powertip_ph800480t013_idf02 panel to stop drm code from complaining about unexpected bpc value (0). Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
-
Arnd Bergmann authored
The newly added driver only builds when DRM_DISPLAY_DP_HELPER is enabled: x86_64-linux-ld: drivers/gpu/drm/panel/panel-visionox-r66451.o: in function `visionox_r66451_enable': panel-visionox-r66451.c:(.text+0x105): undefined reference to `drm_dsc_pps_payload_pack' Select both CONFIG_DRM_DISPLAY_DP_HELPER and CONFIG_DRM_DISPLAY_HELPER to ensure the helper function is always available. Fixes: a6dfab27 ("drm/panel: Add driver for Visionox r66451 panel") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by:
-
Maxime Ripard authored
We've had a couple of tests that weren't really obvious, nor did they document what they were supposed to test. Document that to make it hopefully more obvious. Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
Maíra Canal <mairacanal@riseup.net> Link: https://lore.kernel.org/r/20230728-kms-kunit-actions-rework-v3-11-952565ccccfe@kernel.orgSigned-off-by:
Maxime Ripard <mripard@kernel.org>
-
Maxime Ripard authored
Now that we have a helper that takes care of an atomic state allocation and cleanup, we can migrate to it to simplify our tests. Reviewed-by:
-
Maxime Ripard authored
The new helper to init the locking context allows to remove some boilerplate. Reviewed-by:
-
Maxime Ripard authored
The *_mock_device functions allocate a DRM device that needs to be released using drm_dev_unregister. Now that we have a kunit release action API, we can switch to it and don't require any kind of garbage collection from the caller. Reviewed-by:
-
Maxime Ripard authored
Calling drm_kunit_helper_free_device() to clean up the resources allocated by drm_kunit_helper_alloc_device() is now optional and not needed in most cases. Remove it. Reviewed-by:
-
Maxime Ripard authored
As we gain more tests, boilerplate to allocate an atomic state and free it starts to be there more and more as well. In order to reduce the allocation boilerplate, we can create a helper to create that atomic state, and call an action when the test is done. This will also clean up the exit path. Reviewed-by:
-
Maxime Ripard authored
As we get more and more tests, the locking context initialisation creates more and more boilerplate, both at creation and destruction. Let's create a helper that will allocate, initialise a context, and register kunit actions to clean up once the test is done. Reviewed-by:
-
Maxime Ripard authored
Calling drm_kunit_helper_free_device() to clean up the resources allocated by drm_kunit_helper_alloc_device() is now optional and not needed in most cases. Remove it. Reviewed-by:
-
Maxime Ripard authored
Calling drm_kunit_helper_free_device() to clean up the resources allocated by drm_kunit_helper_alloc_device() is now optional and not needed in most cases. Remove it. Reviewed-by:
-
Maxime Ripard authored
Calling drm_kunit_helper_free_device() to clean up the resources allocated by drm_kunit_helper_alloc_device() is now optional and not needed in most cases. Remove it. Reviewed-by:
-
Maxime Ripard authored
Reviewed-by:
-
Zhu Wang authored
When building with W=1, the following warning occurs. drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c:48:17: warning: ‘anx781x_i2c_addresses’ defined but not used [-Wunused-const-variable=] static const u8 anx781x_i2c_addresses[] = { ^~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c:40:17: warning: ‘anx7808_i2c_addresses’ defined but not used [-Wunused-const-variable=] static const u8 anx7808_i2c_addresses[] = { When CONFIG_IO is disabled, above two variables are not used, since the place where it is used is inclueded in the macro CONFIG_OF. Even for drivers that do not depend on CONFIG_OF, it's almost always better to leave out the of_match_ptr(), since the only thing it can possibly do is to save a few bytes of .text if a driver can be used both with and without it. Hence we remove all of_match_ptr() used in other places. Fixes: 0647e7dd ("drm/bridge: Add Analogix anx78xx support") Signed-off-by:Zhu Wang <wangzhu9@huawei.com> Reviewed-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230731021345.219588-1-wangzhu9@huawei.com
-
Jiapeng Chong authored
No functional modification involved. drivers/gpu/drm/solomon/ssd130x.c:715 ssd130x_primary_plane_duplicate_state() warn: inconsistent indenting. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6034Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by:
-
- 29 Jul, 2023 10 commits
-
-
Geert Uytterhoeven authored
As of commit a01cb8ba ("drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c"), drm_plane_helper_check_state() no longer exists, but is part of drm_atomic_helper_check_plane_state(). Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Geert Uytterhoeven authored
The transitional helpers were removed a long time ago, but some references stuck. Remove them. Fixes: 21ebe615 ("drm: Remove transitional helpers") Signed-off-by:
-
Geert Uytterhoeven authored
Convert the references to fbconv links to footnotes, so they can be navigated. Signed-off-by:
-
Geert Uytterhoeven authored
The section about converting existing KMS drivers to atomic modesetting mentions the existence of a conversion guide, but does not reference it. While the guide is old and rusty, it still contains useful information, so add a link to it. Also link to the LWN.net articles that give an overview about the atomic mode setting design. While at it, remove the reference to unconverted virtual HW drivers, as they've been converted. Signed-off-by:
-
Geert Uytterhoeven authored
As the temporary buffer is no longer used to store 8-bit grayscale data, its size can be reduced to the size needed to store the monochrome bitmap data. Fixes: 24c6bede ("drm/repaper: Use format helper for xrgb8888 to monochrome conversion") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
-
Geert Uytterhoeven authored
As ffs() returns one more than the index of the first bit set (zero means no bits set), the color key mode value is shifted one position too much. Fix this by using FIELD_GET() instead. Fixes: c96103b6 ("drm/armada: move colorkey properties into overlay plane state") Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Geert Uytterhoeven authored
Fix a misspelling of "rendez-vous". Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Geert Uytterhoeven authored
Fix misspellings of "semaphore". Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Geert Uytterhoeven authored
Use the drm_crtc_helper_atomic_check() helper instead of open-coding the same operation. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Sui Jingfeng <suijingfeng@loongson.cn> Signed-off-by:
-
Geert Uytterhoeven authored
drm_connector_init_with_ddc() can fail, but the call in drm_bridge_connector_init() does not check that. Fix this by adding the missing error handling. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
- 28 Jul, 2023 12 commits
-
-
Lyude Paul authored
Currently we use the drm_dp_dpcd_read_caps() helper in the DRM side of nouveau in order to read the DPCD of a DP connector, which makes sure we do the right thing and also check for extended DPCD caps. However, it turns out we're not currently doing this on the nvkm side since we don't have access to the drm_dp_aux structure there - which means that the DRM side of the driver and the NVKM side can end up with different DPCD capabilities for the same connector. Ideally in order to fix this, we just want to use the drm_dp_read_dpcd_caps() helper in nouveau. That's not currently possible though, and is going to depend on having a bunch of the DP code moved out of nvkm and into the DRM side of things as part of the GSP enablement work. Until then however, let's workaround this problem by porting a copy of drm_dp_read_dpcd_caps() into NVKM - which should fix this issue. Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Karol Herbst <kherbst@redhat.com> Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/211 Link: https://patchwork.freedesktop.org/patch/msgid/20230728225858.350581-1-lyude@redhat.com
-
Yangtao Li authored
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by:
Yangtao Li <frank.li@vivo.com> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20230710032355.72914-8-frank.li@vivo.comSigned-off-by:
-
Yangtao Li authored
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by:
-
Philipp Zabel authored
Use the already existing local variable height = drm_rect_height() >> 16 to replace other occurrences of the same value. Suggested-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
-
Jocelyn Falempe authored
Aspeed always report the display port as "connected", because it doesn't set a .detect_ctx callback. Fix this by providing the proper detect callback for astdp and dp501. This also fixes the following regression: Since commit fae7d186 ("drm/probe-helper: Default to 640x480 if no EDID on DP") The default resolution is now 640x480 when no monitor is connected. But Aspeed graphics is mostly used in servers, where no monitor is attached. This also affects the remote BMC resolution to 640x480, which is inconvenient, and breaks the anaconda installer. v2: Add .detect callback to the dp/dp501 connector (Jani Nikula) v3: Use .detect_ctx callback, and refactors (Thomas Zimmermann) Add a BMC virtual connector v4: Better indent detect_ctx() functions (Thomas Zimmermann) v5: Enable polling of the dp and dp501 connector status (Thomas Zimmermann) v6: Change check order in ast_astdp_is_connected (Jammy Huang) Fixes: fae7d186 ("drm/probe-helper: Default to 640x480 if no EDID on DP") Signed-off-by:
Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by:
-
Jocelyn Falempe authored
Most aspeed devices have a BMC, which allows to remotely see the screen. Also in the common use case, those servers don't have a display connected. So add a Virtual connector, to reflect that even if no display is connected, the framebuffer can still be seen remotely. This prepares the work to implement a detect_ctx() for the Display port connector. v4: call drm_add_modes_noedid() with 4096x4096 (Thomas Zimmermann) remove useless struct field init to 0 (Thomas Zimmermann) don't use drm_simple_encoder_init() (Thomas Zimmermann) inline ast_bmc_connector_init() (Thomas Zimmermann) Fixes: fae7d186 ("drm/probe-helper: Default to 640x480 if no EDID on DP") Signed-off-by: -
Alexander Stein authored
This helps identifying problems with downstream pipeline devices, like HDMI/DP output. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Signed-off-by:
-
Geert Uytterhoeven authored
Both the patform_driver and mipi_dsi_driver structures contain pointers to the match table used, so the custom code to obtain match and match data can be replaced by calls to of_device_get_match_data(). Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Geert Uytterhoeven authored
If CONFIG_FB_CORE=y and CONFIG_FB=n, the frame buffer bootup logos can no longer be enabled. Fix this by making CONFIG_LOGO depend on CONFIG_FB_CORE instead of CONFIG_FB, as there is no good reason for the logo code to depend on the presence of real frame buffer device drivers. Fixes: 55bffc81 ("fbdev: Split frame buffer support in FB and FB_CORE symbols") Signed-off-by:
-
Geert Uytterhoeven authored
This reverts commit a6a00d7e. This commit is redundant, as the root cause that resulted in a false positive was fixed by commit 27f644dc ("x86: kmsan: use C versions of memset16/memset32/memset64"). Closes: https://lore.kernel.org/r/CAMuHMdUH4CU9EfoirSxjivg08FDimtstn7hizemzyQzYeq6b6g@mail.gmail.com/Signed-off-by:
-
Geert Uytterhoeven authored
All debug messages in drm_gem_framebuffer_helper.c use drm_dbg_kms(), except for one, which uses drm_dbg(). Replace the outlier by drm_dbg_kms() to restore consistency. Fixes: c91acda3 ("drm/gem: Check for valid formats") Signed-off-by:
Maíra Canal <mcanal@igalia.com> Signed-off-by:
-
Geert Uytterhoeven authored
drm_crtc_force_disable_all() was renamed to drm_helper_force_disable_all(), but one reference was not updated. Fixes: c2d88e06 ("drm: Move the legacy kms disable_all helper to crtc helpers") Signed-off-by:
-
