- 28 Nov, 2021 25 commits
-
-
Rob Clark authored
Add a debugfs interface to ignore hw error irqs, in order to force fallback to sw hangcheck mechanism. Because the hw error detection is pretty good on newer gens, we need this for igt tests to test the sw hang detection. Signed-off-by:
Rob Clark <robdclark@chromium.org> Reviewed-by:
Akhil P Oommen <akhilpo@codeaurora.org> Link: https://lore.kernel.org/r/20211109181117.591148-6-robdclark@gmail.comSigned-off-by:
-
Rob Clark authored
Add some helpers for fence comparision, which handle rollover properly, and stop open coding fence seqno comparisions. Signed-off-by:
-
Rob Clark authored
The remaining struct_mutex usage is just to serialize various gpu related things (submit/retire/recover/fault/etc), so replace struct_mutex with gpu->lock. Signed-off-by:
-
Rob Clark authored
cur_ctx_seqno already does the same thing, but handles the edge cases where a refcnt'd context can live after lastclose. So let's not have two ways to do the same thing. Signed-off-by:
-
Rob Clark authored
The struct_mutex locking is a remnant from the days before per-obj locks, and no longer needed. Signed-off-by:
-
Dmitry Baryshkov authored
The "vdd" regulator was used by the mdp5 driver only on downstream kernels, where the GDSC is represented as a regulator. On all current kernels the MDSS_GDSC is implemented as the power domain, removing the need for this regulator. Remove it from the mdp5 driver. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211104003428.2205497-1-dmitry.baryshkov@linaro.orgSigned-off-by:
-
Sankeerth Billakanti authored
The eDP sink on sc7280 supports ASSR and dp driver will enable ASSR in the source hardware. The driver needs to enable the ASSR field in the DPCD configuration register to avoid screen corruption. This change will enable ASSR if supported in the sink device. Signed-off-by:
Sankeerth Billakanti <quic_sbillaka@quicinc.com> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1635839325-401-6-git-send-email-quic_sbillaka@quicinc.comSigned-off-by:
-
Sankeerth Billakanti authored
The sc7280 eDP sink that supports downspread will fail link training if source does not enable SSC / downspread. This change will set the downspread bit in the DP sink if supported and indicate SSC support to the DP PHY driver. Signed-off-by:
-
Sankeerth Billakanti authored
Add a macro to check for the max_downspread capability in drm_dp_helper. Signed-off-by:
-
Sankeerth Billakanti authored
The eDP controller on SC7280 is similar to the eDP/DP controllers supported by the current driver implementation. SC7280 supports one EDP and one DP controller which can operate concurrently. This change adds the support for eDP and DP controller on sc7280. Signed-off-by:
-
Sankeerth Billakanti authored
The Qualcomm SC7280 platform supports one eDP controller and a DP controller. This change will add the compatible string for both eDP and DP to msm dp-controller binding. Signed-off-by:
-
Dmitry Baryshkov authored
There is no reason to set clock parents manually, use device tree to assign DSI/display clock parents to DSI PHY clocks. Dropping this manual setup allows us to drop repeating code and to move registration of hw clock providers to generic place. Signed-off-by:
Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20211006204828.1218225-2-dmitry.baryshkov@linaro.orgSigned-off-by:
-
Dmitry Baryshkov authored
Move DPHY/CPHY setting from msm_dsi_host_set_src_pll() to new function msm_dsi_host_set_phy_mode(). Signed-off-by:
-
Dmitry Baryshkov authored
eDP driver is being removed, so drop bindings description. Signed-off-by:
-
Dmitry Baryshkov authored
MSM DRM driver has support for eDP block present on MSM 8x74/8x84 SoC families. However since addition back in 2015 this driver received only generic fixes. No actual devices with these SoCs supported upstream (or by the community) seem to support eDP panels. Judging from downstream kernels the eDP was present only on MSM8974 LIQUID or on APQ8084 CDP. Remove this driver. Signed-off-by:
-
Dmitry Baryshkov authored
Prepare for removing old eDP support present in 8x74/8x84 SoC families. No devices present in mainline support eDP ports. Signed-off-by:
-
Dmitry Baryshkov authored
Do not cache hw_pipe's sblk in dpu_plane. Use pdpu->pipe_hw->cap->sblk directly. Signed-off-by:
-
Dmitry Baryshkov authored
Do not cache hw_pipe's features in dpu_plane. Use pdpu->pipe_hw->cap->features directly. Signed-off-by:
-
Dmitry Baryshkov authored
Remove struct dpu_hw_pipe_cdp_cfg instance from dpu_plane, it is an interim configuration structure. Allocate it on stack instead. Signed-off-by:
-
Dmitry Baryshkov authored
Simplify code surrounding CSC table setup by removing struct dpu_csc_cfg pointer from dpu_plane and getting it directly at the CSC setup time. Signed-off-by:
-
Dmitry Baryshkov authored
struct dpu_hw_pipe_cfg represents an interim state during atomic update/color fill, so move it out of struct dpu_plane. Signed-off-by:
-
Dmitry Baryshkov authored
The stage_cfg is not used outside of _dpu_crtc_blend_setup(), so remove the temporary config from global struct. Signed-off-by:
-
Dmitry Baryshkov authored
Use plane->name instead of artificial pipe_name. Signed-off-by:
-
Dmitry Baryshkov authored
The pipe_qos_cfg is used only in _dpu_plane_set_qos_ctrl(), so remove it from the dpu_plane struct and allocate it on stack when necessary. Signed-off-by:
-
Dmitry Baryshkov authored
LUT levels are setup outside of setup_qos_ctrl, so remove them from the struct dpu_hw_pipe_qos_cfg. Signed-off-by:
-
- 26 Nov, 2021 1 commit
-
-
Arnd Bergmann authored
When CONFIG_COMMON_CLOCK is disabled, the 8996 specific phy code is left out, which results in a link failure: ld: drivers/gpu/drm/msm/hdmi/hdmi_phy.o:(.rodata+0x3f0): undefined reference to `msm_hdmi_phy_8996_cfg' This was only exposed after it became possible to build test the driver without the clock interfaces. Make COMMON_CLK a hard dependency for compile testing, and simplify it a little based on that. Fixes: b3ed524f ("drm/msm: allow compile_test on !ARM") Reported-by:
Randy Dunlap <rdunlap@infradead.org> Suggested-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
- 22 Nov, 2021 3 commits
-
-
Rob Clark authored
In particular, we need to ensure all the necessary blocks are switched to 64b mode (a5xx+) otherwise the high bits of the address of the BO to snapshot state into will be ignored, resulting in: *** gpu fault: ttbr0=0000000000000000 iova=0000000000012000 dir=READ type=TRANSLATION source=CP (0,0,0,0) platform 506a000.gmu: [drm:a6xx_gmu_set_oob] *ERROR* Timeout waiting for GMU OOB set BOOT_SLUMBER: 0x0 Fixes: 4f776f45 ("drm/msm/gpu: Convert the GPU show function to use the GPU state") Signed-off-by:
-
Douglas Anderson authored
If you happened to try to access `/dev/drm_dp_aux` devices provided by the MSM DP AUX driver too early at bootup you could go boom. Let's avoid that by only allowing AUX transfers when the controller is powered up. Specifically the crash that was seen (on Chrome OS 5.4 tree with relevant backports): Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 0 PID: 3131 Comm: fwupd Not tainted 5.4.144-16620-g28af11b73efb #1 Hardware name: Google Lazor (rev3+) with KB Backlight (DT) Call trace: dump_backtrace+0x0/0x14c show_stack+0x20/0x2c dump_stack+0xac/0x124 panic+0x150/0x390 nmi_panic+0x80/0x94 arm64_serror_panic+0x78/0x84 do_serror+0x0/0x118 do_serror+0xa4/0x118 el1_error+0xbc/0x160 dp_catalog_aux_write_data+0x1c/0x3c dp_aux_cmd_fifo_tx+0xf0/0x1b0 dp_aux_transfer+0x1b0/0x2bc drm_dp_dpcd_access+0x8c/0x11c drm_dp_dpcd_read+0x64/0x10c auxdev_read_iter+0xd4/0x1c4 I did a little bit of tracing and found that: * We register the AUX device very early at bootup. * Power isn't actually turned on for my system until hpd_event_thread() -> dp_display_host_init() -> dp_power_init() * You can see that dp_power_init() calls dp_aux_init() which is where we start allowing AUX channel requests to go through. In general this patch is a bit of a bandaid but at least it gets us out of the current state where userspace acting at the wrong time can fully crash the system. * I think the more proper fix (which requires quite a bit more changes) is to power stuff on while an AUX transfer is happening. This is like the solution we did for ti-sn65dsi86. This might be required for us to move to populating the panel via the DP-AUX bus. * Another fix considered was to dynamically register / unregister. I tried that at <https://crrev.com/c/3169431/3> but it got ugly. Currently there's a bug where the pm_runtime() state isn't tracked properly and that causes us to just keep registering more and more. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by:
-
Philip Chen authored
If "data_lanes" property of the dsi output endpoint is missing in the DT, num_data_lanes would be 0 by default, which could cause dsi_host_attach() to fail if dsi->lanes is set to a non-zero value by the bridge driver. According to the binding document of msm dsi controller, the input/output endpoint of the controller is expected to have 4 lanes. So let's set num_data_lanes to 4 by default. Signed-off-by:
Philip Chen <philipchen@chromium.org> Reviewed-by:
-
- 21 Nov, 2021 11 commits
-
-
Rob Clark authored
Looks like 658f4c82 ("drm/msm/devfreq: Add 1ms delay before clamping freq") was badly rebased on top of efb8a170 ("drm/msm: Fix devfreq NULL pointer dereference on a3xx") and ended up with the NULL check in the wrong place. Fixes: 658f4c82 ("drm/msm/devfreq: Add 1ms delay before clamping freq") Signed-off-by:
-
Rob Clark authored
This was supposed to be a relative timer, not absolute. Fixes: 658f4c82 ("drm/msm/devfreq: Add 1ms delay before clamping freq") Signed-off-by:
-
Akhil P Oommen authored
Avoid a possible uninitialized use of gpu_scid variable to fix the below smatch warning: drivers/gpu/drm/msm/adreno/a6xx_gpu.c:1480 a6xx_llc_activate() error: uninitialized symbol 'gpu_scid'. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Akhil P Oommen authored
Fix the below null pointer dereference in msm_ioctl_gem_submit(): 26545.260705: Call trace: 26545.263223: kref_put+0x1c/0x60 26545.266452: msm_ioctl_gem_submit+0x254/0x744 26545.270937: drm_ioctl_kernel+0xa8/0x124 26545.274976: drm_ioctl+0x21c/0x33c 26545.278478: drm_compat_ioctl+0xdc/0xf0 26545.282428: __arm64_compat_sys_ioctl+0xc8/0x100 26545.287169: el0_svc_common+0xf8/0x250 26545.291025: do_el0_svc_compat+0x28/0x54 26545.295066: el0_svc_compat+0x10/0x1c 26545.298838: el0_sync_compat_handler+0xa8/0xcc 26545.303403: el0_sync_compat+0x188/0x1c0 26545.307445: Code: d503201f d503201f 52800028 4b0803e8 (b8680008) 26545.318799: Kernel panic - not syncing: Oops: Fatal exception Signed-off-by:
-
Rob Clark authored
Mesa attempts to allocate a cached-coherent buffer in order to determine if cached-coherent is supported. Resulting in seeing this error message once per process with newer mesa. But no reason for this to be more than a debug msg. Signed-off-by:
-
Rob Clark authored
Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Rob Clark authored
When converting to use an idr to map userspace fence seqno values back to a dma_fence, we lost the error return when userspace passes seqno that is larger than the last submitted fence. Restore this check. Reported-by:
-
Rob Clark authored
We weren't dropping the submitqueue reference in all paths. In particular, when the fence has already been signalled. Split out a helper to simplify handling this in the various different return paths. Fixes: a61acbbe ("drm/msm: Track "seqno" fences by idr") Signed-off-by:
-
Douglas Anderson authored
In commit 510410bf ("drm/msm: Implement mmap as GEM object function") we switched to a new/cleaner method of doing things. That's good, but we missed a little bit. Before that commit, we used to _first_ run through the drm_gem_mmap_obj() case where `obj->funcs->mmap()` was NULL. That meant that we ran: vma->vm_flags |= VM_IO | VM_PFNMAP | VM_DONTEXPAND | VM_DONTDUMP; vma->vm_page_prot = pgprot_writecombine(vm_get_page_prot(vma->vm_flags)); vma->vm_page_prot = pgprot_decrypted(vma->vm_page_prot); ...and _then_ we modified those mappings with our own. Now that `obj->funcs->mmap()` is no longer NULL we don't run the default code. It looks like the fact that the vm_flags got VM_IO / VM_DONTDUMP was important because we're now getting crashes on Chromebooks that use ARC++ while logging out. Specifically a crash that looks like this (this is on a 5.10 kernel w/ relevant backports but also seen on a 5.15 kernel): Unable to handle kernel paging request at virtual address ffffffc008000000 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp=000000008293d000 [ffffffc008000000] pgd=00000001002b3003, p4d=00000001002b3003, pud=00000001002b3003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP [...] CPU: 7 PID: 15734 Comm: crash_dump64 Tainted: G W 5.10.67 #1 [...] Hardware name: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform (DT) pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--) pc : __arch_copy_to_user+0xc0/0x30c lr : copyout+0xac/0x14c [...] Call trace: __arch_copy_to_user+0xc0/0x30c copy_page_to_iter+0x1a0/0x294 process_vm_rw_core+0x240/0x408 process_vm_rw+0x110/0x16c __arm64_sys_process_vm_readv+0x30/0x3c el0_svc_common+0xf8/0x250 do_el0_svc+0x30/0x80 el0_svc+0x10/0x1c el0_sync_handler+0x78/0x108 el0_sync+0x184/0x1c0 Code: f8408423 f80008c3 910020c6 36100082 (b8404423) Let's add the two flags back in. While we're at it, the fact that we aren't running the default means that we _don't_ need to clear out VM_PFNMAP, so remove that and save an instruction. NOTE: it was confirmed that VM_IO was the important flag to fix the problem I was seeing, but adding back VM_DONTDUMP seems like a sane thing to do so I'm doing that too. Fixes: 510410bf ("drm/msm: Implement mmap as GEM object function") Reported-by:
-
Rob Clark authored
Reported-by:
Steev Klimaszewski <steev@kali.org> Reviewed-by:
-
Douglas Anderson authored
In commit 142639a5 ("drm/msm/a6xx: fix crashstate capture for A650") we changed a6xx_get_gmu_registers() to read 3 sets of registers. Unfortunately, we didn't change the memory allocation for the array. That leads to a KASAN warning (this was on the chromeos-5.4 kernel, which has the problematic commit backported to it): BUG: KASAN: slab-out-of-bounds in _a6xx_get_gmu_registers+0x144/0x430 Write of size 8 at addr ffffff80c89432b0 by task A618-worker/209 CPU: 5 PID: 209 Comm: A618-worker Tainted: G W 5.4.156-lockdep #22 Hardware name: Google Lazor Limozeen without Touchscreen (rev5 - rev8) (DT) Call trace: dump_backtrace+0x0/0x248 show_stack+0x20/0x2c dump_stack+0x128/0x1ec print_address_description+0x88/0x4a0 __kasan_report+0xfc/0x120 kasan_report+0x10/0x18 __asan_report_store8_noabort+0x1c/0x24 _a6xx_get_gmu_registers+0x144/0x430 a6xx_gpu_state_get+0x330/0x25d4 msm_gpu_crashstate_capture+0xa0/0x84c recover_worker+0x328/0x838 kthread_worker_fn+0x32c/0x574 kthread+0x2dc/0x39c ret_from_fork+0x10/0x18 Allocated by task 209: __kasan_kmalloc+0xfc/0x1c4 kasan_kmalloc+0xc/0x14 kmem_cache_alloc_trace+0x1f0/0x2a0 a6xx_gpu_state_get+0x164/0x25d4 msm_gpu_crashstate_capture+0xa0/0x84c recover_worker+0x328/0x838 kthread_worker_fn+0x32c/0x574 kthread+0x2dc/0x39c ret_from_fork+0x10/0x18 Fixes: 142639a5 ("drm/msm/a6xx: fix crashstate capture for A650") Signed-off-by:
-
