Pull PCIe non-transparent bridge updates from Jon Mason:
 "Bug fixes for intel ntb driver debugfs, use after free in switchtec
  driver, ntb transport rx ring buffers. Also, cleanups in printks,
  kernel-docs, and idt driver comment"

* tag 'ntb-6.12' of https://github.com/jonmason/ntb:
  ntb: Force physically contiguous allocation of rx ring buffers
  ntb: ntb_hw_switchtec: Fix use after free vulnerability in switchtec_ntb_remove due to race condition
  ntb: idt: Fix the cacography in ntb_hw_idt.c
  NTB: epf: don't misuse kernel-doc marker
  NTB: ntb_transport: fix all kernel-doc warnings
  ntb: Constify struct bus_type
  ntb_perf: Fix printk format
  ntb: intel: Fix the NULL vs IS_ERR() bug for debugfs_create_dir()

Merge tag 'firewire-updates-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire updates from Takashi Sakamoto:
 "In the FireWire subsystem, tasklets have been used as the bottom half
  of 1394 OHCi hardIRQ. In recent kernel updates, BH workqueues have
  become available, and some developers have proposed replacing the
  tasklet with a BH workqueue.

  As a first step towards dropping tasklet use, the 1394 OHCI
  isochronous context can use regular workqueues. In this context, the
  batch of packets is processed in the specific queue, thus the timing
  jitter caused by task scheduling is not so critical.

  Additionally, DMA transmission can be scheduled per-packet basis,
  therefore the context can be sleep between the operation of
  transmissions. Furthermore, in-kernel protocol implementation involves
  some CPU-bound tasks, which can sometimes consumes CPU time so long.
  These characteristics suggest that normal workqueues are suitable,
  through BH workqueues are not.

  The replacement with a workqueue allows unit drivers to process the
  content of packets in non-atomic context. It brings some reliefs to
  some drivers in sound subsystem that spin-lock is not mandatory
  anymore during isochronous packet processing.

  Summary:

   - Replace tasklet with workqueue for isochronous context

   - Replace IDR with XArray

   - Utilize guard macro where possible

   - Print deprecation warning when enabling debug parameter of
     firewire-ohci module

   - Switch to nonatomic PCM operation"

* tag 'firewire-updates-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (55 commits)
  firewire: core: rename cause flag of tracepoints event
  firewire: core: update documentation of kernel APIs for flushing completions
  firewire: core: add helper function to retire descriptors
  Revert "firewire: core: move workqueue handler from 1394 OHCI driver to core function"
  Revert "firewire: core: use mutex to coordinate concurrent calls to flush completions"
  firewire: core: use mutex to coordinate concurrent calls to flush completions
  firewire: core: move workqueue handler from 1394 OHCI driver to core function
  firewire: core: fulfill documentation of fw_iso_context_flush_completions()
  firewire: core: expose kernel API to schedule work item to process isochronous context
  firewire: core: use WARN_ON_ONCE() to avoid superfluous dumps
  ALSA: firewire: use nonatomic PCM operation
  firewire: core: non-atomic memory allocation for isochronous event to user client
  firewire: ohci: operate IT/IR events in sleepable work process instead of tasklet softIRQ
  firewire: core: add local API to queue work item to workqueue specific to isochronous contexts
  firewire: core: allocate workqueue to handle isochronous contexts in card
  firewire: ohci: obsolete direct usage of printk_ratelimit()
  firewire: ohci: deprecate debug parameter
  firewire: core: update fw_device outside of device_find_child()
  firewire: ohci: fix error path to detect initiated reset in TI TSB41BA3D phy
  firewire: core/ohci: minor refactoring for computation of configuration ROM size
  ...

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Wait for device readiness after reset by polling Vendor ID and
     looking for Configuration RRS instead of polling the Command
     register and looking for non-error completions, to avoid hardware
     retries done for RRS on non-Vendor ID reads (Bjorn Helgaas)

   - Rename CRS Completion Status to RRS ('Request Retry Status') to
     match PCIe r6.0 spec usage (Bjorn Helgaas)

   - Clear LBMS bit after a manual link retrain so we don't try to
     retrain a link when there's no downstream device anymore (Maciej W.
     Rozycki)

   - Revert to the original link speed after retraining fails instead of
     leaving it restricted to 2.5GT/s, so a future device has a chance
     to use higher speeds (Maciej W. Rozycki)

   - Wait for each level of downstream bus, not just the first, to
     become accessible before restoring devices on that bus (Ilpo
     Järvinen)

   - Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups
     without having to stomp on the core's pdev->dev.groups (Lukas
     Wunner)

  Driver binding:

   - Export pcim_request_region(), a managed counterpart of
     pci_request_region(), for use by drivers (Philipp Stanner)

   - Export pcim_iomap_region() and deprecate pcim_iomap_regions()
     (Philipp Stanner)

   - Request the PCI BAR used by xboxvideo (Philipp Stanner)

   - Request and map drm/ast BARs with pcim_iomap_region() (Philipp
     Stanner)

  MSI:

   - Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a
     single IRQ line and cannot set the affinity of each MSI to a
     specific CPU core (Marek Vasut)

   - Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity()
     implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3,
     mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl,
     xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed'
     warnings (Marek Vasut)

  Power management:

   - Add pwrctl support for ATH11K inside the WCN6855 package (Konrad
     Dybcio)

  PCI device hotplug:

   - Remove unnecessary hpc_ops struct from shpchp (ngn)

   - Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp
     (weiyufeng)

  Virtualization:

   - Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson)

   - Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS
     but does provide ACS-like features (Subramanian Ananthanarayanan)

  IOMMU:

   - Add function 0 DMA alias quirk for Glenfly Arise audio function,
     which uses the function 0 Requester ID (WangYuli)

  NPEM:

   - Add Native PCIe Enclosure Management (NPEM) support for sysfs
     control of NVMe RAID storage indicators (ok/fail/locate/
     rebuild/etc) (Mariusz Tkaczyk)

   - Add support for the ACPI _DSM PCIe SSD status LED management, which
     is functionally similar to NPEM but mediated by platform firmware
     (Mariusz Tkaczyk)

  Device trees:

   - Drop minItems and maxItems from ranges in PCI generic host binding
     since host bridges may have several MMIO and I/O port apertures
     (Frank Li)

   - Add kirin, rcar-gen2, uniphier DT binding top-level constraints for
     clocks (Krzysztof Kozlowski)

  Altera PCIe controller driver:

   - Convert altera DT bindings from text to YAML (Matthew Gerlach)

   - Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same
     thing and is what other drivers use (Jinjie Ruan)

  Broadcom STB PCIe controller driver:

   - Add DT binding maxItems for reset controllers (Jim Quinlan)

   - Use the 'bridge' reset method if described in the DT (Jim Quinlan)

   - Use the 'swinit' reset method if described in the DT (Jim Quinlan)

   - Add 'has_phy' so the existence of a 'rescal' reset controller
     doesn't imply software control of it (Jim Quinlan)

   - Add support for many inbound DMA windows (Jim Quinlan)

   - Rename SoC 'type' to 'soc_base' express the fact that SoCs come in
     families of multiple similar devices (Jim Quinlan)

   - Add Broadcom 7712 DT description and driver support (Jim Quinlan)

   - Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for
     maintainability (Bjorn Helgaas)

  Freescale i.MX6 PCIe controller driver:

   - Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints
     (Richard Zhu)

   - Fix a code restructuring error that caused i.MX8MM and i.MX8MP
     Endpoints to fail to establish link (Richard Zhu)

   - Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing
     outbound alignment requirement (Richard Zhu)

   - Call phy_power_off() in the .probe() error path (Frank Li)

   - Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also
     supported (Frank Li)

   - Manage Refclk by using SoC-specific callbacks instead of switch
     statements (Frank Li)

   - Manage core reset by using SoC-specific callbacks instead of switch
     statements (Frank Li)

   - Expand comments for erratum ERR010728 workaround (Frank Li)

   - Use generic PHY APIs to configure mode, speed, and submode, which
     is harmless for devices that implement their own internal PHY
     management and don't set the generic imx_pcie->phy (Frank Li)

   - Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver
     Root Complex support (Richard Zhu)

  Freescale Layerscape PCIe controller driver:

   - Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with
     fsl,lx2160ar2-pcie (Frank Li)

   - Add layerscape-pcie DT binding deprecated 'num-viewport' property
     to address a DT checker warning (Frank Li)

   - Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array
     (Frank Li)

  Loongson PCIe controller driver:

   - Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets
     (Huacai Chen)

  Marvell Aardvark PCIe controller driver:

   - Fix issue with emulating Configuration RRS for two-byte reads of
     Vendor ID; previously it only worked for four-byte reads (Bjorn
     Helgaas)

  MediaTek PCIe Gen3 controller driver:

   - Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC
     types (Lorenzo Bianconi)

   - Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi)

   - Add DT and driver support for Airoha EN7581 PCIe controller
     (Lorenzo Bianconi)

  Qualcomm PCIe controller driver:

   - Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan
     Ansari)

   - Add back DT 'vddpe-3v3-supply', which was incorrectly removed
     earlier (Johan Hovold)

   - Drop endpoint redundant masking of global IRQ events (Manivannan
     Sadhasivam)

   - Clarify unknown global IRQ message and only log it once to avoid a
     flood (Manivannan Sadhasivam)

   - Add 'linux,pci-domain' property to endpoint DT binding (Manivannan
     Sadhasivam)

   - Assign PCI domain number for endpoint controllers (Manivannan
     Sadhasivam)

   - Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for
     endpoint controller (Manivannan Sadhasivam)

   - Add global SPI interrupt for PCIe link events to DT binding
     (Manivannan Sadhasivam)

   - Add global RC interrupt handler to handle 'Link up' events and
     automatically enumerate hot-added devices (Manivannan Sadhasivam)

   - Avoid mirroring of DBI and iATU register space so it doesn't
     overlap BAR MMIO space (Prudhvi Yarlagadda)

   - Enable controller resources like PHY only after PERST# is
     deasserted to partially avoid the problem that the endpoint SoC
     crashes when accessing things when Refclk is absent (Manivannan
     Sadhasivam)

   - Add 16.0 GT/s equalization and RX lane margining settings (Shashank
     Babu Chinta Venkata)

   - Pass domain number to pci_bus_release_domain_nr() explicitly to
     avoid a NULL pointer dereference (Manivannan Sadhasivam)

  Renesas R-Car PCIe controller driver:

   - Make the read-only const array 'check_addr' static (Colin Ian King)

   - Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding
     (Yoshihiro Shimoda)

  TI DRA7xx PCIe controller driver:

   - Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary
     handler is NULL (Siddharth Vadapalli)

   - Handle IRQ request errors during root port and endpoint probe
     (Siddharth Vadapalli)

  TI J721E PCIe driver:

   - Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable
     the ACSPCIE module to drive Refclk for the Endpoint (Siddharth
     Vadapalli)

   - Extract the cadence link setup from cdns_pcie_host_setup() so link
     setup can be done separately during resume (Thomas Richard)

   - Add T_PERST_CLK_US definition for the mandatory delay between
     Refclk becoming stable and PERST# being deasserted (Thomas Richard)

   - Add j721e suspend and resume support (Théo Lebrun)

  TI Keystone PCIe controller driver:

   - Fix NULL pointer checking when applying MRRS limitation quirk for
     AM65x SR 1.0 Errata #i2037 (Dan Carpenter)

  Xilinx NWL PCIe controller driver:

   - Fix off-by-one error in INTx IRQ handler that caused INTx
     interrupts to be lost or delivered as the wrong interrupt (Sean
     Anderson)

   - Rate-limit misc interrupt messages (Sean Anderson)

   - Turn off the clock on probe failure and device removal (Sean
     Anderson)

   - Add DT binding and driver support for enabling/disabling PHYs (Sean
     Anderson)

   - Add PCIe phy bindings for the ZCU102 (Sean Anderson)

  Xilinx XDMA PCIe controller driver:

   - Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT
     binding and xilinx-dma-pl driver (Thippeswamy Havalige)

  Miscellaneous:

   - Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina)

   - Fix minor kerneldoc issues and typos (Bjorn Helgaas)

   - Use PCI_DEVID() macro in aer_inject() instead of open-coding it
     (Jinjie Ruan)

   - Check pcie_find_root_port() return in x86 fixups to avoid NULL
     pointer dereferences (Samasth Norway Ananda)

   - Make pci_bus_type constant (Kunwu Chan)

   - Remove unused declarations of __pci_pme_wakeup() and
     pci_vpd_release() (Yue Haibing)

   - Remove any leftover .*.cmd files with make clean (zhang jiao)

   - Remove unused BILLION macro (zhang jiao)"

* tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits)
  PCI: Fix typos
  dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again
  tools: PCI: Remove unused BILLION macro
  tools: PCI: Remove .*.cmd files with make clean
  PCI: Pass domain number to pci_bus_release_domain_nr() explicitly
  PCI: dra7xx: Fix error handling when IRQ request fails in probe
  PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ
  PCI: qcom: Add RX lane margining settings for 16.0 GT/s
  PCI: qcom: Add equalization settings for 16.0 GT/s
  PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
  PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
  PCI: qcom-ep: Enable controller resources like PHY only after refclk is available
  PCI: Mark Creative Labs EMU20k2 INTx masking as broken
  dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
  dt-bindings: PCI: altera: msi: Convert to YAML
  PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support
  PCI: Rename CRS Completion Status to RRS
  PCI: aardvark: Correct Configuration RRS checking
  PCI: Wait for device readiness with Configuration RRS
  PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings
  ...

Pull nfsd updates from Chuck Lever:
 "Notable features of this release include:

   - Pre-requisites for automatically determining the RPC server thread
     count

   - Clean-up and preparation for supporting LOCALIO, which will be
     merged via the NFS client tree

   - Enhancements and fixes to NFSv4.2 COPY offload

   - A new Python-based tool for generating kernel SunRPC XDR encoding
     and decoding functions, added as an aid for prototyping features in
     protocols based on the Linux kernel's SunRPC implementation

  As always I am grateful to the NFSD contributors, reviewers, testers,
  and bug reporters who participated during this cycle"

* tag 'nfsd-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (57 commits)
  xdrgen: Prevent reordering of encoder and decoder functions
  xdrgen: typedefs should use the built-in string and opaque functions
  xdrgen: Fix return code checking in built-in XDR decoders
  tools: Add xdrgen
  nfsd: fix delegation_blocked() to block correctly for at least 30 seconds
  nfsd: fix initial getattr on write delegation
  nfsd: untangle code in nfsd4_deleg_getattr_conflict()
  nfsd: enforce upper limit for namelen in __cld_pipe_inprogress_downcall()
  nfsd: return -EINVAL when namelen is 0
  NFSD: Wrap async copy operations with trace points
  NFSD: Clean up extra whitespace in trace_nfsd_copy_done
  NFSD: Record the callback stateid in copy tracepoints
  NFSD: Display copy stateids with conventional print formatting
  NFSD: Limit the number of concurrent async COPY operations
  NFSD: Async COPY result needs to return a write verifier
  nfsd: avoid races with wake_up_var()
  nfsd: use clear_and_wake_up_bit()
  sunrpc: xprtrdma: Use ERR_CAST() to return
  NFSD: Annotate struct pnfs_block_deviceaddr with __counted_by()
  nfsd: call cache_put if xdr_reserve_space returns NULL
  ...

Pull gfs2 update from Andreas Gruenbacher:

 - Convert the writepage address space operation to writepages (Matthew
   Wilcox)

 - A syzkaller fix (by Julian Sun) and a minor cleanup (Andreas
   Gruenbacher)

* tag 'gfs2-v6.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Remove gfs2_aspace_writepage()
  gfs2: Remove gfs2_jdata_writepage()
  gfs2: Remove __gfs2_writepage()
  gfs2: Add gfs2_aspace_writepages()
  gfs2: fix double destroy_workqueue error
  gfs2: Minor gfs2_glock_cb cleanup

Pull btrfs fixes from David Sterba:

 - fix dangling pointer to rb-tree of defragmented inodes after cleanup

 - a followup fix to handle concurrent lseek on the same fd that could
   leak memory under some conditions

 - fix wrong root id reported in tree checker when verifying dref

* tag 'for-6.12-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix use-after-free on rbtree that tracks inodes for auto defrag
  btrfs: tree-checker: fix the wrong output of data backref objectid
  btrfs: fix race setting file private on concurrent lseek using same fd

Pull quota and isofs updates from Jan Kara:
 "A few small cleanups in quota and isofs"

* tag 'fs_for_v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  isofs: Annotate struct SL_component with __counted_by()
  quota: remove unnecessary error code translation in dquot_quota_enable
  quota: remove redundant return at end of void function
  quota: remove unneeded return value of register_quota_format
  quota: avoid missing put_quota_format when DQUOT_SUSPENDED is passed

Pull bcachefs updates from Kent Overstreet:

 - rcu_pending, btree key cache rework: this solves lock contenting in
   the key cache, eliminating the biggest source of the srcu lock hold
   time warnings, and drastically improving performance on some metadata
   heavy workloads - on multithreaded creates we're now 3-4x faster than
   xfs.

 - We're now using an rhashtable instead of the system inode hash table;
   this is another significant performance improvement on multithreaded
   metadata workloads, eliminating more lock contention.

 - for_each_btree_key_in_subvolume_upto(): new helper for iterating over
   keys within a specific subvolume, eliminating a lot of open coded
   "subvolume_get_snapshot()" and also fixing another source of srcu
   lock time warnings, by running each loop iteration in its own
   transaction (as the existing for_each_btree_key() does).

 - More work on btree_trans locking asserts; we now assert that we don't
   hold btree node locks when trans->locked is false, which is important
   because we don't use lockdep for tracking individual btree node
   locks.

 - Some cleanups and improvements in the bset.c btree node lookup code,
   from Alan.

 - Rework of btree node pinning, which we use in backpointers fsck. The
   old hacky implementation, where the shrinker just skipped over nodes
   in the pinned range, was causing OOMs; instead we now use another
   shrinker with a much higher seeks number for pinned nodes.

 - Rebalance now uses BCH_WRITE_ONLY_SPECIFIED_DEVS; this fixes an issue
   where rebalance would sometimes fall back to allocating from the full
   filesystem, which is not what we want when it's trying to move data
   to a specific target.

 - Use __GFP_ACCOUNT, GFP_RECLAIMABLE for btree node, key cache
   allocations.

 - Idmap mounts are now supported (Hongbo Li)

 - Rename whiteouts are now supported (Hongbo Li)

 - Erasure coding can now handle devices being marked as failed, or
   forcibly removed. We still need the evacuate path for erasure coding,
   but it's getting very close to ready for people to start using.

* tag 'bcachefs-2024-09-21' of git://evilpiepirate.org/bcachefs: (99 commits)
  bcachefs: return err ptr instead of null in read sb clean
  bcachefs: Remove duplicated include in backpointers.c
  bcachefs: Don't drop devices with stripe pointers
  bcachefs: bch2_ec_stripe_head_get() now checks for change in rw devices
  bcachefs: bch_fs.rw_devs_change_count
  bcachefs: bch2_dev_remove_stripes()
  bcachefs: bch2_trigger_ptr() calculates sectors even when no device
  bcachefs: improve error messages in bch2_ec_read_extent()
  bcachefs: improve error message on too few devices for ec
  bcachefs: improve bch2_new_stripe_to_text()
  bcachefs: ec_stripe_head.nr_created
  bcachefs: bch_stripe.disk_label
  bcachefs: stripe_to_mem()
  bcachefs: EIO errcode cleanup
  bcachefs: Rework btree node pinning
  bcachefs: split up btree cache counters for live, freeable
  bcachefs: btree cache counters should be size_t
  bcachefs: Don't count "skipped access bit" as touched in btree cache scan
  bcachefs: Failed devices no longer require mounting in degraded mode
  bcachefs: bch2_dev_rcu_noerror()
  ...

Pull 'struct fd' updates from Al Viro:
 "Just the 'struct fd' layout change, with conversion to accessor
  helpers"

* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  add struct fd constructors, get rid of __to_fd()
  struct fd: representation change
  introduce fd_file(), convert all accessors to it.

The merge resolution to deal with the conflict between commits
ea72ce5d ("x86/kaslr: Expose and use the end of the physical memory
address space") and 99185c10 ("resource, kunit: add test case for
region_intersects()") ended up being broken in configurations didn't
define a MAX_PHYSMEM_BITS and that had a 32-bit 'phys_addr_t'.

The fallback to using all bits set (ie "(-1ULL)") ended up causing a
build error:

    kernel/resource.c: In function ‘gfr_start’:
    include/linux/minmax.h:93:30: error: conversion from ‘long long unsigned int’ to ‘resource_size_t’ {aka ‘unsigned int’} changes value from ‘18446744073709551615’ to ‘4294967295’ [-Werror=overflow]

this was reported by Geert for m68k, but he points out that it happens
on other 32-bit architectures too, eg mips, xtensa, parisc, and powerpc.

Limiting 'PHYSMEM_END' to a 'phys_addr_t' (which is the same as
'resource_size_t') fixes the build, but Geert points out that it will
then cause a silent overflow in mm/sparse.c:

	unsigned long max_sparsemem_pfn = (PHYSMEM_END + 1) >> PAGE_SHIFT;

so we actually do want PHYSMEM_END to be defined a 64-bit type - just
not all ones, and not larger than 'phys_addr_t'.

The proper fix is probably to not have some kind of default fallback at
all, but just make sure every architecture has a valid MAX_PHYSMEM_BITS.
But in the meantime, this just applies the rule that PHYSMEM_END is the
largest value that fits in a 'phys_addr_t', but does not have the high
bit set in 64 bits.

Ugly, ugly.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Hexagon images fail to build with the following error.

arch/hexagon/kernel/vdso.c:57:3: error: use of undeclared identifier 'name'
                name = "[vdso]",
                ^

Add the missing '.' to fix the problem.

Fixes: 497258df ("mm: remove legacy install_special_mapping() code")
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Many architectures support load acquire which can replace a memory
barrier and save some cycles.

A typical sequence

	do {
		seq = read_seqcount_begin(&s);
		<something>
	} while (read_seqcount_retry(&s, seq);

requires 13 cycles on an N1 Neoverse arm64 core (Ampere Altra, to be
specific) for an empty loop.  Two read memory barriers are needed.  One
for each of the seqcount_* functions.

We can replace the first read barrier with a load acquire of the
seqcount which saves us one barrier.

On the Altra doing so reduces the cycle count from 13 to 8.

According to ARM, this is a general improvement for the ARM64
architecture and not specific to a certain processor.

See

  https://developer.arm.com/documentation/102336/0100/Load-Acquire-and-Store-Release-instructions

 "Weaker ordering requirements that are imposed by Load-Acquire and
  Store-Release instructions allow for micro-architectural
  optimizations, which could reduce some of the performance impacts that
  are otherwise imposed by an explicit memory barrier.

  If the ordering requirement is satisfied using either a Load-Acquire
  or Store-Release, then it would be preferable to use these
  instructions instead of a DMB"

[ NOTE! This is my original minimal patch that unconditionally switches
  over to using smp_load_acquire(), instead of the much more involved
  and subtle patch that Christoph Lameter wrote that made it
  conditional.

  But Christoph gets authorship credit because I had initially thought
  that we needed the more complex model, and Christoph ran with it it
  and did the work. Only after looking at code generation for all the
  relevant architectures, did I come to the conclusion that nobody
  actually really needs the old "smp_rmb()" model.

  Even architectures without load-acquire support generally do as well
  or better with smp_load_acquire().

  So credit to Christoph, but if this then causes issues on other
  architectures, put the blame solidly on me.

  Also note as part of the ruthless simplification, this gets rid of the
  overly subtle optimization where some code uses a non-barrier version
  of the sequence count (see the __read_seqcount_begin() users in
  fs/namei.c). They then play games with their own barriers and/or with
  nested sequence counts.

  Those optimizations are literally meaningless on x86, and questionable
  elsewhere. If somebody can show that they matter, we need to re-do
  them more cleanly than "use an internal helper".       - Linus ]
Signed-off-by: Christoph Lameter (Ampere) <cl@gentwo.org>
Link: https://lore.kernel.org/all/20240912-seq_optimize-v3-1-8ee25e04dffa@gentwo.org/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge user access fast validation using address masking.

This allows architectures to optionally use a data dependent address
masking model instead of a conditional branch for validating user
accesses.  That avoids the Spectre-v1 speculation barriers.

Right now only x86-64 takes advantage of this, and not all architectures
will be able to do it.  It requires a guard region between the user and
kernel address spaces (so that you can't overflow from one to the
other), and an easy way to generate a guaranteed-to-fault address for
invalid user pointers.

Also note that this currently assumes that there is no difference
between user read and write accesses.  If extended to architectures like
powerpc, we'll also need to separate out the user read-vs-write cases.

* address-masking:
  x86: make the masked_user_access_begin() macro use its argument only once
  x86: do the user address masking outside the user access area
  x86: support user address masking instead of non-speculative conditional

This doesn't actually matter for any of the current users, but before
merging it mainline, make sure we don't have any surprising semantics.

We don't actually want to use an inline function here, because we want
to allow - but not require - const pointer arguments, and return them as
such.  But we already had a local auto-type variable, so let's just use
it to avoid any possible double evaluation.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'trace-ring-buffer-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull ring-buffer updates from Steven Rostedt:

 - tracing/ring-buffer: persistent buffer across reboots

   This allows for the tracing instance ring buffer to stay persistent
   across reboots. The way this is done is by adding to the kernel
   command line:

     trace_instance=boot_map@0x285400000:12M

   This will reserve 12 megabytes at the address 0x285400000, and then
   map the tracing instance "boot_map" ring buffer to that memory. This
   will appear as a normal instance in the tracefs system:

     /sys/kernel/tracing/instances/boot_map

   A user could enable tracing in that instance, and on reboot or kernel
   crash, if the memory is not wiped by the firmware, it will recreate
   the trace in that instance. For example, if one was debugging a
   shutdown of a kernel reboot:

     # cd /sys/kernel/tracing
     # echo function > instances/boot_map/current_tracer
     # reboot
     [..]
     # cd /sys/kernel/tracing
     # tail instances/boot_map/trace
           swapper/0-1       [000] d..1.   164.549800: restore_boot_irq_mode <-native_machine_shutdown
           swapper/0-1       [000] d..1.   164.549801: native_restore_boot_irq_mode <-native_machine_shutdown
           swapper/0-1       [000] d..1.   164.549802: disconnect_bsp_APIC <-native_machine_shutdown
           swapper/0-1       [000] d..1.   164.549811: hpet_disable <-native_machine_shutdown
           swapper/0-1       [000] d..1.   164.549812: iommu_shutdown_noop <-native_machine_restart
           swapper/0-1       [000] d..1.   164.549813: native_machine_emergency_restart <-__do_sys_reboot
           swapper/0-1       [000] d..1.   164.549813: tboot_shutdown <-native_machine_emergency_restart
           swapper/0-1       [000] d..1.   164.549820: acpi_reboot <-native_machine_emergency_restart
           swapper/0-1       [000] d..1.   164.549821: acpi_reset <-acpi_reboot
           swapper/0-1       [000] d..1.   164.549822: acpi_os_write_port <-acpi_reboot

   On reboot, the buffer is examined to make sure it is valid. The
   validation check even steps through every event to make sure the meta
   data of the event is correct. If any test fails, it will simply reset
   the buffer, and the buffer will be empty on boot.

 - Allow the tracing persistent boot buffer to use the "reserve_mem"
   option

   Instead of having the admin find a physical address to store the
   persistent buffer, which can be very tedious if they have to
   administrate several different machines, allow them to use the
   "reserve_mem" option that will find a location for them. It is not as
   reliable because of KASLR, as the loading of the kernel in different
   locations can cause the memory allocated to be inconsistent. Booting
   with "nokaslr" can make reserve_mem more reliable.

 - Have function graph tracer handle offsets from a previous boot.

   The ring buffer output from a previous boot may have different
   addresses due to kaslr. Have the function graph tracer handle these
   by using the delta from the previous boot to the new boot address
   space.

 - Only reset the saved meta offset when the buffer is started or reset

   In the persistent memory meta data, it holds the previous address
   space information, so that it can calculate the delta to have
   function tracing work. But this gets updated after being read to hold
   the new address space. But if the buffer isn't used for that boot, on
   reboot, the delta is now calculated from the previous boot and not
   the boot that holds the data in the ring buffer. This causes the
   functions not to be shown. Do not save the address space information
   of the current kernel until it is being recorded.

 - Add a magic variable to test the valid meta data

   Add a magic variable in the meta data that can also be used for
   validation. The validator of the previous buffer doesn't need this
   magic data, but it can be used if the meta data is changed by a new
   kernel, which may have the same format that passes the validator but
   is used differently. This magic number can also be used as a
   "versioning" of the meta data.

 - Align user space mapped ring buffer sub buffers to improve TLB
   entries

   Linus mentioned that the mapped ring buffer sub buffers were
   misaligned between the meta page and the sub-buffers, so that if the
   sub-buffers were bigger than PAGE_SIZE, it wouldn't allow the TLB to
   use bigger entries.

 - Add new kernel command line "traceoff" to disable tracing on boot for
   instances

   If tracing is enabled for a boot instance, there needs a way to be
   able to disable it on boot so that new events do not get entered into
   the ring buffer and be mixed with events from a previous boot, as
   that can be confusing.

 - Allow trace_printk() to go to other instances

   Currently, trace_printk() can only go to the top level instance. When
   debugging with a persistent buffer, it is really useful to be able to
   add trace_printk() to go to that buffer, so that you have access to
   them after a crash.

 - Do not use "bin_printk()" for traces to a boot instance

   The bin_printk() saves only a pointer to the printk format in the
   ring buffer, as the reader of the buffer can still have access to it.
   But this is not the case if the buffer is from a previous boot. If
   the trace_printk() is going to a "persistent" buffer, it will use the
   slower version that writes the printk format into the buffer.

 - Add command line option to allow trace_printk() to go to an instance

   Allow the kernel command line to define which instance the
   trace_printk() goes to, instead of forcing the admin to set it for
   every boot via the tracefs options.

 - Start a document that explains how to use tracefs to debug the kernel

 - Add some more kernel selftests to test user mapped ring buffer

* tag 'trace-ring-buffer-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (28 commits)
  selftests/ring-buffer: Handle meta-page bigger than the system
  selftests/ring-buffer: Verify the entire meta-page padding
  tracing/Documentation: Start a document on how to debug with tracing
  tracing: Add option to set an instance to be the trace_printk destination
  tracing: Have trace_printk not use binary prints if boot buffer
  tracing: Allow trace_printk() to go to other instance buffers
  tracing: Add "traceoff" flag to boot time tracing instances
  ring-buffer: Align meta-page to sub-buffers for improved TLB usage
  ring-buffer: Add magic and struct size to boot up meta data
  ring-buffer: Don't reset persistent ring-buffer meta saved addresses
  tracing/fgraph: Have fgraph handle previous boot function addresses
  tracing: Allow boot instances to use reserve_mem boot memory
  tracing: Fix ifdef of snapshots to not prevent last_boot_info file
  ring-buffer: Use vma_pages() helper function
  tracing: Fix NULL vs IS_ERR() check in enable_instances()
  tracing: Add last boot delta offset for stack traces
  tracing: Update function tracing output for previous boot buffer
  tracing: Handle old buffer mappings for event strings and functions
  tracing/ring-buffer: Add last_boot_info file to boot instance
  ring-buffer: Save text and data locations in mapped meta data
  ...

Pull ktest updates from Steven Rostedt:

 - Add notification of build warnings for all tests

   Currently, the build will only fail on warnings if the ktest config
   file states that it should fail or if the compile is done with
   '-Werror'. This has allowed warnings to sneak in if it doesn't fail.

   Add a notification at the end of the test that will state that
   warnings were found in the build so that the developer will be aware
   of it.

 - Fix the grub2 parser to not return the wrong kernel index

   ktest.pl can read the grub.cfg file to know what kernel to boot to
   via grub-reboot. This requires knowing the index that the kernel is
   referenced by in the grub.cfg file. Some distros have logic to
   determine the menuentry that can cause the ktest.pl to come up with
   the wrong index and boot the wrong kernel.

* tag 'ktest-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest.pl: Avoid false positives with grub2 skip regex
  ktest.pl: Always warn on build warnings

Merge tag 'perf-tools-for-v6.12-1-2024-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Arnaldo Carvalho de Melo:

 - Use BPF + BTF to collect and pretty print syscall and tracepoint
   arguments in 'perf trace', done as an GSoC activity

 - Data-type profiling improvements:

     - Cache debuginfo to speed up data type resolution

     - Add the 'typecln' sort order, to show which cacheline in a target
       is hot or cold. The following shows members in the cfs_rq's first
       cache line:

         $ perf report -s type,typecln,typeoff -H
         ...
         -    2.67%        struct cfs_rq
            +    1.23%        struct cfs_rq: cache-line 2
            +    0.57%        struct cfs_rq: cache-line 4
            +    0.46%        struct cfs_rq: cache-line 6
            -    0.41%        struct cfs_rq: cache-line 0
                    0.39%        struct cfs_rq +0x14 (h_nr_running)
                    0.02%        struct cfs_rq +0x38 (tasks_timeline.rb_leftmost)

     - When a typedef resolves to a unnamed struct, use the typedef name

     - When a struct has just one basic type field (int, etc), resolve
       the type sort order to the name of the struct, not the type of
       the field

     - Support type folding/unfolding in the data-type annotation TUI

     - Fix bitfields offsets and sizes

     - Initial support for PowerPC, using libcapstone and the usual
       objdump disassembly parsing routines

 - Add support for disassembling and addr2line using the LLVM libraries,
   speeding up those operations

 - Support --addr2line option in 'perf script' as with other tools

 - Intel branch counters (LBR event logging) support, only available in
   recent Intel processors, for instance, the new "brcntr" field can be
   asked from 'perf script' to print the information collected from this
   feature:

     $ perf script -F +brstackinsn,+brcntr

     # Branch counter abbr list:
     # branch-instructions:ppp = A
     # branch-misses = B
     # '-' No event occurs
     # '+' Event occurrences may be lost due to branch counter saturated
         tchain_edit  332203 3366329.405674:  53030 branch-instructions:ppp:    401781 f3+0x2c (home/sdp/test/tchain_edit)
            f3+31:
         0000000000401774   insn: eb 04                  br_cntr: AA  # PRED 5 cycles [5]
         000000000040177a   insn: 81 7d fc 0f 27 00 00
         0000000000401781   insn: 7e e3                  br_cntr: A   # PRED 1 cycles [6] 2.00 IPC
         0000000000401766   insn: 8b 45 fc
         0000000000401769   insn: 83 e0 01
         000000000040176c   insn: 85 c0
         000000000040176e   insn: 74 06                  br_cntr: A   # PRED 1 cycles [7] 4.00 IPC
         0000000000401776   insn: 83 45 fc 01
         000000000040177a   insn: 81 7d fc 0f 27 00 00
         0000000000401781   insn: 7e e3                  br_cntr: A   # PRED 7 cycles [14] 0.43 IPC

 - Support Timed PEBS (Precise Event-Based Sampling), a recent hardware
   feature in Intel processors

 - Add 'perf ftrace profile' subcommand, using ftrace's function-graph
   tracer so that users can see the total, average, max execution time
   as well as the number of invocations easily, for instance:

     $ sudo perf ftrace profile -G __x64_sys_perf_event_open -- \
       perf stat -e cycles -C1 true 2> /dev/null | head
     # Total (us)  Avg (us)  Max (us)  Count  Function
           65.611    65.611    65.611      1  __x64_sys_perf_event_open
           30.527    30.527    30.527      1  anon_inode_getfile
           30.260    30.260    30.260      1  __anon_inode_getfile
           29.700    29.700    29.700      1  alloc_file_pseudo
           17.578    17.578    17.578      1  d_alloc_pseudo
           17.382    17.382    17.382      1  __d_alloc
           16.738    16.738    16.738      1  kmem_cache_alloc_lru
           15.686    15.686    15.686      1  perf_event_alloc
           14.012     7.006    11.264      2  obj_cgroup_charge

 - 'perf sched timehist' improvements, including the addition of
   priority showing/filtering command line options

 - Varios improvements to the 'perf probe', including 'perf test'
   regression testings

 - Introduce the 'perf check', initially to check if some feature is
   in place, using it in 'perf test'

 - Various fixes for 32-bit systems

 - Address more leak sanitizer failures

 - Fix memory leaks (LBR, disasm lock ops, etc)

 - More reference counting fixes (branch_info, etc)

 - Constify 'struct perf_tool' parameters to improve code generation
   and reduce the chances of having its internals changed, which isn't
   expected

 - More constifications in various other places

 - Add more build tests, including for JEVENTS

 - Add more 'perf test' entries ('perf record LBR', pipe/inject,
   --setup-filter, 'perf ftrace', 'cgroup sampling', etc)

 - Inject build ids for all entries in a call chain in 'perf inject',
   not just for the main sample

 - Improve the BPF based sample filter, allowing root to setup filters
   in bpffs that then can be used by non-root users

 - Allow filtering by cgroups with the BPF based sample filter

 - Allow a more compact way for 'perf mem report' using the
   -T/--type-profile and also provide a --sort option similar to the one
   in 'perf report', 'perf top', to setup the sort order manually

 - Fix --group behavior in 'perf annotate' when leader has no samples,
   where it was not showing anything even when other events in the group
   had samples

 - Fix spinlock and rwlock accounting in 'perf lock contention'

 - Fix libsubcmd fixdep Makefile dependencies

 - Improve 'perf ftrace' error message when ftrace isn't available

 - Update various Intel JSON vendor event files

 - ARM64 CoreSight hardware tracing infrastructure improvements, mostly
   not visible to users

 - Update power10 JSON events

* tag 'perf-tools-for-v6.12-1-2024-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (310 commits)
  perf trace: Mark the 'head' arg in the set_robust_list syscall as coming from user space
  perf trace: Mark the 'rseq' arg in the rseq syscall as coming from user space
  perf env: Find correct branch counter info on hybrid
  perf evlist: Print hint for group
  tools: Drop nonsensical -O6
  perf pmu: To info add event_type_desc
  perf evsel: Add accessor for tool_event
  perf pmus: Fake PMU clean up
  perf list: Avoid potential out of bounds memory read
  perf help: Fix a typo ("bellow")
  perf ftrace: Detect whether ftrace is enabled on system
  perf test shell probe_vfs_getname: Remove extraneous '=' from probe line number regex
  perf build: Require at least clang 16.0.6 to build BPF skeletons
  perf trace: If a syscall arg is marked as 'const', assume it is coming _from_ userspace
  perf parse-events: Remove duplicated include in parse-events.c
  perf callchain: Allow symbols to be optional when resolving a callchain
  perf inject: Lazy build-id mmap2 event insertion
  perf inject: Add new mmap2-buildid-all option
  perf inject: Fix build ID injection
  perf annotate-data: Add pr_debug_scope()
  ...

The below warning is triggered when building with arm
multi_v7_defconfig.

  kernel/events/core.c: In function 'perf_event_setup_cpumask':
  kernel/events/core.c:14012:13: warning: the comparison will always evaluate as 'true' for the address of 'thread_sibling' will never be NULL [-Waddress]
  14012 |         if (!topology_sibling_cpumask(cpu)) {

The perf_event_init_cpu() may be invoked at the early boot stage, while
the topology_*_cpumask hasn't been initialized yet.  The check is to
specially handle the case, and initialize the perf_online_<domain>_masks
on the boot CPU.

X86 uses a per-cpu cpumask pointer, which could be NULL at the early
boot stage.  However, ARM uses a global variable, which never be NULL.

Use perf_online_mask as an indicator instead.  Only initialize the
perf_online_<domain>_masks when perf_online_mask is empty.

Fix a typo as well.

Fixes: 4ba4f1af ("perf: Generic hotplug support for a PMU with a scope")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/lkml/20240911153854.240bbc1f@canb.auug.org.au/Reported-by: Steven Price <steven.price@arm.com>
Closes: https://lore.kernel.org/lkml/1835eb6d-3e05-47f3-9eae-507ce165c3bf@arm.com/Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Steven Price <steven.price@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull sched_ext support from Tejun Heo:
 "This implements a new scheduler class called ‘ext_sched_class’, or
  sched_ext, which allows scheduling policies to be implemented as BPF
  programs.

  The goals of this are:

   - Ease of experimentation and exploration: Enabling rapid iteration
     of new scheduling policies.

   - Customization: Building application-specific schedulers which
     implement policies that are not applicable to general-purpose
     schedulers.

   - Rapid scheduler deployments: Non-disruptive swap outs of scheduling
     policies in production environments"

See individual commits for more documentation, but also the cover letter
for the latest series:

Link: https://lore.kernel.org/all/20240618212056.2833381-1-tj@kernel.org/

* tag 'sched_ext-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (110 commits)
  sched: Move update_other_load_avgs() to kernel/sched/pelt.c
  sched_ext: Don't trigger ops.quiescent/runnable() on migrations
  sched_ext: Synchronize bypass state changes with rq lock
  scx_qmap: Implement highpri boosting
  sched_ext: Implement scx_bpf_dispatch[_vtime]_from_dsq()
  sched_ext: Compact struct bpf_iter_scx_dsq_kern
  sched_ext: Replace consume_local_task() with move_local_task_to_local_dsq()
  sched_ext: Move consume_local_task() upward
  sched_ext: Move sanity check and dsq_mod_nr() into task_unlink_from_dsq()
  sched_ext: Reorder args for consume_local/remote_task()
  sched_ext: Restructure dispatch_to_local_dsq()
  sched_ext: Fix processs_ddsp_deferred_locals() by unifying DTL_INVALID handling
  sched_ext: Make find_dsq_for_dispatch() handle SCX_DSQ_LOCAL_ON
  sched_ext: Refactor consume_remote_task()
  sched_ext: Rename scx_kfunc_set_sleepable to unlocked and relocate
  sched_ext: Add missing static to scx_dump_data
  sched_ext: Add missing static to scx_has_op[]
  sched_ext: Temporarily work around pick_task_scx() being called without balance_scx()
  sched_ext: Add a cgroup scheduler which uses flattened hierarchy
  sched_ext: Add cgroup support
  ...

Pull bpf updates from Alexei Starovoitov:

 - Introduce '__attribute__((bpf_fastcall))' for helpers and kfuncs with
   corresponding support in LLVM.

   It is similar to existing 'no_caller_saved_registers' attribute in
   GCC/LLVM with a provision for backward compatibility. It allows
   compilers generate more efficient BPF code assuming the verifier or
   JITs will inline or partially inline a helper/kfunc with such
   attribute. bpf_cast_to_kern_ctx, bpf_rdonly_cast,
   bpf_get_smp_processor_id are the first set of such helpers.

 - Harden and extend ELF build ID parsing logic.

   When called from sleepable context the relevants parts of ELF file
   will be read to find and fetch .note.gnu.build-id information. Also
   harden the logic to avoid TOCTOU, overflow, out-of-bounds problems.

 - Improvements and fixes for sched-ext:
    - Allow passing BPF iterators as kfunc arguments
    - Make the pointer returned from iter_next method trusted
    - Fix x86 JIT convergence issue due to growing/shrinking conditional
      jumps in variable length encoding

 - BPF_LSM related:
    - Introduce few VFS kfuncs and consolidate them in
      fs/bpf_fs_kfuncs.c
    - Enforce correct range of return values from certain LSM hooks
    - Disallow attaching to other LSM hooks

 - Prerequisite work for upcoming Qdisc in BPF:
    - Allow kptrs in program provided structs
    - Support for gen_epilogue in verifier_ops

 - Important fixes:
    - Fix uprobe multi pid filter check
    - Fix bpf_strtol and bpf_strtoul helpers
    - Track equal scalars history on per-instruction level
    - Fix tailcall hierarchy on x86 and arm64
    - Fix signed division overflow to prevent INT_MIN/-1 trap on x86
    - Fix get kernel stack in BPF progs attached to tracepoint:syscall

 - Selftests:
    - Add uprobe bench/stress tool
    - Generate file dependencies to drastically improve re-build time
    - Match JIT-ed and BPF asm with __xlated/__jited keywords
    - Convert older tests to test_progs framework
    - Add support for RISC-V
    - Few fixes when BPF programs are compiled with GCC-BPF backend
      (support for GCC-BPF in BPF CI is ongoing in parallel)
    - Add traffic monitor
    - Enable cross compile and musl libc

* tag 'bpf-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (260 commits)
  btf: require pahole 1.21+ for DEBUG_INFO_BTF with default DWARF version
  btf: move pahole check in scripts/link-vmlinux.sh to lib/Kconfig.debug
  btf: remove redundant CONFIG_BPF test in scripts/link-vmlinux.sh
  bpf: Call the missed kfree() when there is no special field in btf
  bpf: Call the missed btf_record_free() when map creation fails
  selftests/bpf: Add a test case to write mtu result into .rodata
  selftests/bpf: Add a test case to write strtol result into .rodata
  selftests/bpf: Rename ARG_PTR_TO_LONG test description
  selftests/bpf: Fix ARG_PTR_TO_LONG {half-,}uninitialized test
  bpf: Zero former ARG_PTR_TO_{LONG,INT} args in case of error
  bpf: Improve check_raw_mode_ok test for MEM_UNINIT-tagged types
  bpf: Fix helper writes to read-only maps
  bpf: Remove truncation test in bpf_strtol and bpf_strtoul helpers
  bpf: Fix bpf_strtol and bpf_strtoul helpers for 32bit
  selftests/bpf: Add tests for sdiv/smod overflow cases
  bpf: Fix a sdiv overflow issue
  libbpf: Add bpf_object__token_fd accessor
  docs/bpf: Add missing BPF program types to docs
  docs/bpf: Add constant values for linkages
  bpf: Use fake pt_regs when doing bpf syscall tracepoint tracing
  ...

Pull s390 updates from Vasily Gorbik:

 - Optimize ftrace and kprobes code patching and avoid stop machine for
   kprobes if sequential instruction fetching facility is available

 - Add hiperdispatch feature to dynamically adjust CPU capacity in
   vertical polarization to improve scheduling efficiency and overall
   performance. Also add infrastructure for handling warning track
   interrupts (WTI), allowing for graceful CPU preemption

 - Rework crypto code pkey module and split it into separate,
   independent modules for sysfs, PCKMO, CCA, and EP11, allowing modules
   to load only when the relevant hardware is available

 - Add hardware acceleration for HMAC modes and the full AES-XTS cipher,
   utilizing message-security assist extensions (MSA) 10 and 11. It
   introduces new shash implementations for HMAC-SHA224/256/384/512 and
   registers the hardware-accelerated AES-XTS cipher as the preferred
   option. Also add clear key token support

 - Add MSA 10 and 11 processor activity instrumentation counters to perf
   and update PAI Extension 1 NNPA counters

 - Cleanup cpu sampling facility code and rework debug/WARN_ON_ONCE
   statements

 - Add support for SHA3 performance enhancements introduced with MSA 12

 - Add support for the query authentication information feature of MSA
   13 and introduce the KDSA CPACF instruction. Provide query and query
   authentication information in sysfs, enabling tools like cpacfinfo to
   present this data in a human-readable form

 - Update kernel disassembler instructions

 - Always enable EXPOLINE_EXTERN if supported by the compiler to ensure
   kpatch compatibility

 - Add missing warning handling and relocated lowcore support to the
   early program check handler

 - Optimize ftrace_return_address() and avoid calling unwinder

 - Make modules use kernel ftrace trampolines

 - Strip relocs from the final vmlinux ELF file to make it roughly 2
   times smaller

 - Dump register contents and call trace for early crashes to the
   console

 - Generate ptdump address marker array dynamically

 - Fix rcu_sched stalls that might occur when adding or removing large
   amounts of pages at once to or from the CMM balloon

 - Fix deadlock caused by recursive lock of the AP bus scan mutex

 - Unify sync and async register save areas in entry code

 - Cleanup debug prints in crypto code

 - Various cleanup and sanitizing patches for the decompressor

 - Various small ftrace cleanups

* tag 's390-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (84 commits)
  s390/crypto: Display Query and Query Authentication Information in sysfs
  s390/crypto: Add Support for Query Authentication Information
  s390/crypto: Rework RRE and RRF CPACF inline functions
  s390/crypto: Add KDSA CPACF Instruction
  s390/disassembler: Remove duplicate instruction format RSY_RDRU
  s390/boot: Move boot_printk() code to own file
  s390/boot: Use boot_printk() instead of sclp_early_printk()
  s390/boot: Rename decompressor_printk() to boot_printk()
  s390/boot: Compile all files with the same march flag
  s390: Use MARCH_HAS_*_FEATURES defines
  s390: Provide MARCH_HAS_*_FEATURES defines
  s390/facility: Disable compile time optimization for decompressor code
  s390/boot: Increase minimum architecture to z10
  s390/als: Remove obsolete comment
  s390/sha3: Fix SHA3 selftests failures
  s390/pkey: Add AES xts and HMAC clear key token support
  s390/cpacf: Add MSA 10 and 11 new PCKMO functions
  s390/mm: Add cond_resched() to cmm_alloc/free_pages()
  s390/pai_ext: Update PAI extension 1 counters
  s390/pai_crypto: Add support for MSA 10 and 11 pai counters
  ...

syzbot reported a null-ptr-deref in bch2_fs_start. [0]

When a sb is marked clear but doesn't have a clean section
bch2_read_superblock_clean returns NULL which PTR_ERR_OR_ZERO
lets through, eventually leading to a null ptr dereference down
the line. Adjust read sb clean to return an ERR_PTR indicating the
invalid clean section.

[0] https://syzkaller.appspot.com/bug?extid=1cecc37d87c4286e5543

Reported-by: syzbot+1cecc37d87c4286e5543@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1cecc37d87c4286e5543Signed-off-by: Diogo Jahchan Koike <djahchankoike@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The header files bbpos.h is included twice in backpointers.c,
so one inclusion of each can be removed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=10783Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This factors out ec_strie_head_devs_update(), which initializes the
bitmap of devices we're allocating from, and runs it every time
c->rw_devs_change_count changes.

We also cancel pending, not allocated stripes, since they may refer to
devices that are no longer available.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add a counter that's incremented whenever rw devices change; this will
be used for erasure coding so that it can keep ec_stripe_head in sync
and not deadlock on a new stripe when a device it wants goes away.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We can now correctly force-remove a device that has stripes on it; this
uses the new BCH_SB_MEMBER_INVALID sentinal value.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This is necessary for erasure coded pointers to devices that have been
removed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

also print out the new stripe key
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

additional debug stat
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

When reshaping existing stripes, we should keep them on the same target
that they were allocated on; to do this, we need to add a field to the
btree stripe type.

This is a tad awkward, because we only have 8 bits left, and targets are
16 bits - but we only need to store a label, not a full target.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

factor out a common helper
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We want to be using private errcodes whenever possible, for better error
messages.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

In backpointers fsck, we do a seqential scan of one btree, and check
references to another: extents <-> backpointers

Checking references generates random lookups, so we want to pin that
btree in memory (or only a range, if it doesn't fit in ram).

Previously, this was done with a simple check in the shrinker - "if
btree node is in range being pinned, don't free it" - but this generated
OOMs, as our shrinker wasn't well behaved if there was less memory
available than expected.

Instead, we now have two different shrinkers and lru lists; the second
shrinker being for pinned nodes, with seeks set much higher than normal
- so they can still be freed if necessary, but we'll prefer not to.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

this is prep for introducing a second live list and shrinker for pinned
nodes
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

32 bits won't overflow any time soon, but size_t is the correct type for
counting objects in memory.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>