Merge tag 'renesas-defconfig-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes

Pull "Renesas ARM Based SoC Defconfig Fixes for v3.19" from Simon Horman:

* Revert change enabling RCAR_AUDMAC_PP in shmobile_defconfig

  Unfortunately enabling RCAR_AUDMAC_PP support this patch breaks dmaengine
  support on R-Car Gen2 boards. This should be resolved by driver updates
  in v3.20. But v3.19 was too early for this defconfig change.

* tag 'renesas-defconfig-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  Revert "ARM: shmobile: multiplatform: add Audo DMAC peri peri support on defconfig"
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The Exynos IOMMU driver uses the ARM specific dmac_flush_range() and
outer_flush_range() functions. This breaks the build on arm64 allmodconfig
in -next since support has been merged for some Exynos ARMv8 SoCs. Add a
dependency on ARM to keep things building until either the driver has the
ARM dependencies removed or the ARMv8 architecture code implements these
ARM specific APIs.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v3.19/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From: Tony Lindgren <tony@atomide.com>
Subject: [GIT PULL] few fixes for the v3.19 merge window

Fixes for a few issues found that would be good to get
into -rc1:

- Update SoC revision detection for am43x es1.2

- Fix regression with GPMC timings on 2430sdp for some versions
  of u-boot

- Fix dra7 watchdog compatible property

- Fix am437x-sk-evm LCD timings

- Fix dra7 DSS clock muxing

- Fix dra7-evm voltages

- Remove a unused function prototype for am33xx_clk_init

- Enable AHCI in the omap2plus_defconfig

* tag 'omap-for-v3.19/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (1601 commits)
  ARM: omap2plus_defconfig: Enable AHCI_PLATFORM driver
  ARM: dts: am437x-sk-evm.dts: fix LCD timings
  ARM: dts: dra7-evm: Update SMPS7 (VDD_CORE) max voltage to match DM
  ARM: dts: dra7-evm: Fix typo in SMPS6 (VDD_GPU) max voltage
  ARM: OMAP2+: AM43x: Add ID for ES1.2
  ARM: dts: am437x-sk: fix lcd enable pin mux data
  ARM: dts: Fix gpmc regression for omap 2430sdp smc91x
  hwmon: (tmp401) Detect TMP435 on all addresses it supports
  mfd: rtsx: Add func to split u32 into register
  mmc: sdhci-msm: Convert to mmc_send_tuning()
  mmc: sdhci-esdhc-imx: Convert to mmc_send_tuning()
  mmc: core: Let mmc_send_tuning() to take struct mmc_host* as parameter
  nios2: Make NIOS2_CMDLINE_IGNORE_DTB depend on CMDLINE_BOOL
  nios2: Add missing NR_CPUS to Kconfig
  nios2: asm-offsets: Remove unused definition TI_TASK
  nios2: Remove write-only struct member from nios2_timer
  nios2: Remove unused extern declaration of shm_align_mask
  nios2: include linux/type.h in io.h
  nios2: move include asm-generic/io.h to end of file
  nios2: remove include asm-generic/iomap.h from io.h
  ...

CONFIG_GENERIC_CPUFREQ_CPU0 disappeared with commit bbcf0719
("cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'") and some
defconfigs are still using it instead of the new one.

Use the renamed CONFIG_CPUFREQ_DT generic driver.

Cc: <stable@vger.kernel.org>        # 3.18
Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

OMAP5 and DRA7 platforms need the AHCI platform driver
for SATA support.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The lcd0 node for am437x-sk-evm.dts contains bad LCD timings, and while
they seem to work with a quick test, doing for example blank/unblank
will give you a black display.

This patch updates the timings to the 'typical' values from the LCD spec
sheet.

Also, the compatible string is completely bogus, as
"osddisplays,osd057T0559-34ts" is _not_ a 480x272 panel. The panel on
the board is a newhaven one. Update the compatible string to reflect
this. Note that this hasn't caused any issues, as the "panel-dpi"
matches the driver.

Cc: <stable@vger.kernel.org> # v3.17+
Tested-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

As per the latest Data Manual, for newer samples,
the nominal voltage required for VDD_CORE at OPP_NOM can be
upto 1.06V which was 1.03V earlier.

Update the regulator max voltage constraint for SMPS7,
connected to VDD_CORE, to meet this requirement.

Document reference:
DRA74 Data Manual, SPRS857M - Dec 2012, Revised Oct 2014.
DRA72 Data Manual, SPRS906G - Dec 2012, revised Oct 2014.
Signed-off-by: Ravikumar Kattekola <rk@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The max expected voltage for VDD_GPU, connected to SMPS6, is 1.25V.
Correct regulator max voltage constraint to meet this requirement.

Document reference: DRA74 Data Manual, SPRS857M - Dec 2012,
		    Revised Oct 2014.

Fixes: c56a831c ("ARM: dts: DRA7: Add TPS659038 PMIC nodes")
Signed-off-by: Ravikumar Kattekola <rk@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ES1.2 is a minor variant of ES1.1. Major changes since ES1.1 are
updating ROM for fixing the following boot modes:
- NAND boot
- UART boot
- Ethernet boot
- USB HOST/Client boot
This patch adds ID support for AM437x ES1.2 silicon.
There are no additional kernel fixes required for ES1.2 silicon.

Latest Technical Documentation can be found here:
http://www.ti.com/lsds/ti/arm/sitara_arm_cortex_a_processor/arm_cortex_a9_core/am437x_arm_cortex_a9/tech_docs.pageSigned-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Caused by a copy & paste error. Note that even with
this bug AM437x SK display still works because GPIO
mux mode is always enabled. It's still wrong to mux
somebody else's pin.

Luckily ball D25 (offset 0x238 - gpio5_8) on AM437x
isn't used for anything.

While at that, also replace a pullup with a pulldown
as that gpio should be normally low, not high.

Cc: <stable@vger.kernel.org> # v3.17+
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Commit f4d809ec55b6 ("ARM: dts: Fix gpmc timings for omap 2430sdp")
added GPMC timings for 2430sdp. This however broke the Ethernet
for some versions of u-boot using a different L3 clock frequency:

set_gpmc_timing_reg: GPMC error! CS5: cs_rd_off: 233 ns, 39 ticks > 31
omap-gpmc 6e000000.gpmc: failed to set gpmc timings for: ethernet

This is because the smsc91x timings from 1.1.4 u-boot overflow the
GPMC registers when booted with 1.1.3 version of u-boot.

Let's fix this issue by using the better timings from u-boot 1.1.3
as they also work on 1.1.4 and are faster.

Note that so far the attempts over the years to calculate the GPMC
timings on the SDP boards have failed probably because of the
unknown latencies added by the FPGA on the debug boards.
Reported-by: Nishanth Menon <nm@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This reverts commit 2315f9fc.

Unfortunately enabling RCAR_AUDMAC_PP support this patch breaks dmaengine
support on R-Car Gen2 boards. This should be resolved by driver updates
in v3.20. But v3.19 was too early for this defconfig change.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Pull asm-generic asm/io.h rewrite from Arnd Bergmann:
 "While there normally is no reason to have a pull request for
  asm-generic but have all changes get merged through whichever tree
  needs them, I do have a series for 3.19.

  There are two sets of patches that change significant portions of
  asm/io.h, and this branch contains both in order to resolve the
  conflicts:

   - Will Deacon has done a set of patches to ensure that all
     architectures define {read,write}{b,w,l,q}_relaxed() functions or
     get them by including asm-generic/io.h.

     These functions are commonly used on ARM specific drivers to avoid
     expensive L2 cache synchronization implied by the normal
     {read,write}{b,w,l,q}, but we need to define them on all
     architectures in order to share the drivers across architectures
     and to enable CONFIG_COMPILE_TEST configurations for them

   - Thierry Reding has done an unrelated set of patches that extends
     the asm-generic/io.h file to the degree necessary to make it useful
     on ARM64 and potentially other architectures"

* tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (29 commits)
  ARM64: use GENERIC_PCI_IOMAP
  sparc: io: remove duplicate relaxed accessors on sparc32
  ARM: sa11x0: Use void __iomem * in MMIO accessors
  arm64: Use include/asm-generic/io.h
  ARM: Use include/asm-generic/io.h
  asm-generic/io.h: Implement generic {read,write}s*()
  asm-generic/io.h: Reconcile I/O accessor overrides
  /dev/mem: Use more consistent data types
  Change xlate_dev_{kmem,mem}_ptr() prototypes
  ARM: ixp4xx: Properly override I/O accessors
  ARM: ixp4xx: Fix build with IXP4XX_INDIRECT_PCI
  ARM: ebsa110: Properly override I/O accessors
  ARC: Remove redundant PCI_IOBASE declaration
  documentation: memory-barriers: clarify relaxed io accessor semantics
  x86: io: implement dummy relaxed accessor macros for writes
  tile: io: implement dummy relaxed accessor macros for writes
  sparc: io: implement dummy relaxed accessor macros for writes
  powerpc: io: implement dummy relaxed accessor macros for writes
  parisc: io: implement dummy relaxed accessor macros for writes
  mn10300: io: implement dummy relaxed accessor macros for writes
  ...

Pull ARM64 SoC changes from Arnd Bergmann:
 "This adds support for two new ARM64 platforms:

   - ARM Juno
   - AMD Seattle

  We had submissions for a number of additional platforms from Samsung,
  Freescale and Spreadtrum but are still working out the best process
  for getting these merged"

* tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: amd-seattle: Fix PCI bus range due to SMMU limitation
  arm64: ARM: Fix the Generic Timers interrupt active level description
  arm64: amd-seattle: Adding device tree for AMD Seattle platform
  arm64: Add Juno board device tree.
  arm64: Create link to include/dt-bindings to enable C preprocessor use.

Pull ARM SoC defconfig changes from Arnd Bergmann:
 "This is a collection of the various changes to defconfig files, most
  importantly enabling some additional platforms in the
  multi_v7_defconfig file.  These are split out into a separate branch
  to avoid most of the merge conflicts in the defconfig files.

  This also touches 12 other defconfig files for shmobile, at91,
  hisilicon, keystone, mvebu, omap, and tegra"

* tag 'defconfig-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits)
  ARM: omap2plus_defconfig: enable ECAP and EHRPWM
  ARM: omap2plus_defconfig: enable XHCI
  ARM: omap2plus_defconfig: enable AM33XX SoC sound
  ARM: omap2plus_defconfig: enable EDT FT5X06 touchscreen
  ARM: omap2plus_defconfig: remove unwanted ethernet drivers
  ARM: multi_v7_defconfig: enable MAX77686 PMIC drivers for exynos4412-prime based SoCs
  ARM: at91/defconfig: add DM9000 to at91_dt
  ARM: at91/defconfig: add QT1070 to at91_dt
  ARM: at91/defconfig: add TCB PWM driver selection
  ARM: at91/defconfig: add the XDMA driver
  ARM: at91: sama5: update defconfig
  ARM: defconfig: imx_v6_v7_defconfig updates
  ARM: multi_v7_defconfig: add driver support for hix5hd2
  ARM: exynos_defconfig: Use 16 minors per MMC block device
  ARM: mvebu: add MTD_BLOCK to mvebu_v7_defconfig
  ARM: mvebu: enable i2c device in mvebu_v7_defconfig
  ARM: mvebu: re-enable SDHCI driver for Armada 38x SoC in v7 defconfig
  ARM: tegra: Regenerate default configuration
  ARM: multi_v7_defconfig: Enable cgroups
  ARM: multi_v7_defconfig: Enable Broadcom Cygnus
  ...

Pull ARM SoC/OMAP GPMC driver cleanup and move from Arnd Bergmann:
 "The GPMC driver has traditionally been considered a part of the OMAP
  platform code and tightly interweaved with some of the boards.

  With this cleanup, it has finally come to the point where it makes
  sense to move it out of arch/arm into drivers/memory, where we already
  have other drivers for similar hardware.  The cleanups are still
  ongoing, with the goal of eventually having a standalone driver that
  does not require an interface to architecture code.

  This is a separate branch because of dependencies on multiple other
  branches, and to keep the drivers changes separate from the normal
  cleanups"

* tag 'omap-gpmc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  memory: gpmc: Move omap gpmc code to live under drivers
  ARM: OMAP2+: Move GPMC initcall to devices.c
  ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header
  ARM: OMAP2+: Remove unnecesary include in GPMC driver
  ARM: OMAP2+: Drop board file for 3430sdp
  ARM: OMAP2+: Drop board file for ti8168evm
  ARM: OMAP2+: Drop legacy code for gpmc-smc91x.c
  ARM: OMAP2+: Require proper GPMC timings for devices
  ARM: OMAP2+: Show bootloader GPMC timings to allow configuring the .dts file
  ARM: OMAP2+: Fix support for multiple devices on a GPMC chip select
  ARM: OMAP2+: gpmc: Sanity check GPMC fck on probe
  ARM: OMAP2+: gpmc: Keep Chip Select disabled while configuring it
  ARM: OMAP2+: gpmc: Always enable A26-A11 for non NAND devices
  ARM: OMAP2+: gpmc: Error out if timings fail in gpmc_probe_generic_child()
  ARM: OMAP2+: gpmc: Print error message in set_gpmc_timing_reg()

Pull ARM SoC DT updates from Arnd Bergmann:
 "The DT branch adds a lot of new stuff for additional SoC and board
  support.  The branch is the largest one and contains 513 out of the
  total 972 non-merge arm-soc changesets for 3.19.

  Most of the changes are about enabling additional on-chip devices for
  existing machines, but there are also an unusual number of new SoC
  types being added this time:

   - AMLogic Meson8
   - ARM Realview in DT mode
   - Allwinner A80
   - Broadcom BCM47081
   - Broadcom Cygnus
   - Freescale LS1021A
   - Freescale Vybrid 500 series
   - Mediatek MT6592, MT8127, MT8135
   - STMicroelectronics STiH410
   - Samsung Exynos4415

  The level of support for the above differs widely, some are just stubs
  with nothing more than CPU, memory and a UART, but others are fairly
  complete.  As usual, these get extended over time.

  There are also many new boards getting added, this is the list of
  model strings that are showing up in new dts files:

   - ARM RealView PB1176
   - Altera SOCFPGA Arria 10
   - Asus RT-N18U (BCM47081)
   - Buffalo WZR-1750DHP (BCM4708)
   - Buffalo WZR-600DHP2 (BCM47081)
   - Cygnus Enterprise Phone (BCM911360_ENTPHN)
   - D-Link DIR-665
   - Google Spring
   - IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)
   - IGEPv2 Rev. F (TI OMAP AM/DM37x)
   - LS1021A QDS Board
   - LS1021A TWR Board
   - LeMaker Banana Pi
   - MarsBoard RK3066
   - MediaTek MT8127 Moose Board
   - MediaTek MT8135 evaluation board
   - Mele M3
   - Merrii A80 Optimus Board
   - Netgear R6300 V2 (BCM4708)
   - Nomadik STN8815NHK
   - NovaTech OrionLXm
   - Olimex A20-OLinuXino-LIME2
   - Raspberry Pi Model B+
   - STiH410 B2120
   - Samsung Monk board
   - Samsung Rinato board
   - Synology DS213j
   - Synology DS414
   - TBS2910 Matrix ARM mini PC
   - TI AM5728 BeagleBoard-X15
   - Toradex Colibri VF50 on Colibri Evaluation Board
   - Zynq ZYBO Development Board

  Other notable changes include:

   - exynos: cleanup of existing dts files
   - mvebu: improved pinctrl support for Armada 370/XP
   - nomadik: restructuring dts files
   - omap: added CAN bus support
   - shmobile: added clock support for some SoCs
   - shmobile: added sound support for some SoCs
   - sirf: reset controller support
   - sunxi: continuing the relicensing under dual GPL/MIT
   - sunxi: lots of new on-chip device support
   - sunxi: working simplefb support (long awaited)
   - various: provide stdout-path property for earlycon"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (510 commits)
  ARM: dts: rk3288: add arm,cpu-registers-not-fw-configured
  Revert "ARM: dts: rockchip: temporarily disable smp on rk3288"
  ARM: BCM5301X: Add DT for Buffalo WZR-600DHP2
  ARM: BCM5301X: Add DT for Asus RT-N18U
  ARM: BCM5301X: Add DT for Buffalo WZR-1750DHP
  ARM: BCM5301X: Add DT for Netgear R6300 V2
  ARM: BCM5301X: Add buttons for Netgear R6250
  ARM: dts: rockchip: Add input voltage supply regulators in pmic for Marsboard
  ARM: BCM5301X: Add IRQs to Broadcom's bus-axi in DTS file
  arm: dts: zynq: Add Digilent ZYBO board
  arm: dts: zynq: Move crystal freq. to board level
  doc: dt: vendor-prefixes: Add Digilent Inc
  Documentation: devicetree: Fix Xilinx VDMA specification
  ARM: dts: rockchip: set FIFO size for SDMMC, SDIO and EMMC on rk3066 and rk3188
  ARM: dts: rockchip: add label property for leds on Radxa Rock
  ARM: BCM5301X: Add LEDs for Netgear R6250 V1
  ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file
  ARM: dts: add sysreg phandle to i2c device nodes for exynos
  ARM: dts: Remove unused bootargs from exynos3250-rinato
  ARM: dts: add board dts file for Exynos3250-based Monk board
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are changes for drivers that are intimately tied to some SoC and
  for some reason could not get merged through the respective subsystem
  maintainer tree.

  The largest single change here this time around is the Tegra
  iommu/memory controller driver, which gets updated to the new iommu DT
  binding.  More drivers like this are likely to follow for the
  following merge window, but we should be able to do those through the
  iommu maintainer.

  Other notable changes are:
   - reset controller drivers from the reset maintainer (socfpga, sti,
     berlin)
   - fixes for the keystone navigator driver merged last time
   - at91 rtc driver changes related to the at91 cleanups
   - ARM perf driver changes from Will Deacon
   - updates for the brcmstb_gisb driver"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits)
  clocksource: arch_timer: Allow the device tree to specify uninitialized timer registers
  clocksource: arch_timer: Fix code to use physical timers when requested
  memory: Add NVIDIA Tegra memory controller support
  bus: brcmstb_gisb: Add register offset tables for older chips
  bus: brcmstb_gisb: Look up register offsets in a table
  bus: brcmstb_gisb: Introduce wrapper functions for MMIO accesses
  bus: brcmstb_gisb: Make the driver buildable on MIPS
  of: Add NVIDIA Tegra memory controller binding
  ARM: tegra: Move AHB Kconfig to drivers/amba
  amba: Add Kconfig file
  clk: tegra: Implement memory-controller clock
  serial: samsung: Fix serial config dependencies for exynos7
  bus: brcmstb_gisb: resolve section mismatch
  ARM: common: edma: edma_pm_resume may be unused
  ARM: common: edma: add suspend resume hook
  powerpc/iommu: Rename iommu_[un]map_sg functions
  rtc: at91sam9: add DT bindings documentation
  rtc: at91sam9: use clk API instead of relying on AT91_SLOW_CLOCK
  ARM: at91: add clk_lookup entry for RTT devices
  rtc: at91sam9: rework the Kconfig description
  ...

Pull ARM SoC platform changes from Arnd Bergmann:
 "New and updated SoC support, notable changes include:

   - bcm:
        brcmstb SMP support
        initial iproc/cygnus support
   - exynos:
        Exynos4415 SoC support
        PMU and suspend support for Exynos5420
        PMU support for Exynos3250
        pm related maintenance
   - imx:
        new LS1021A SoC support
        vybrid 610 global timer support
   - integrator:
        convert to using multiplatform configuration
   - mediatek:
        earlyprintk support for mt8127/mt8135
   - meson:
        meson8 soc and l2 cache controller support
   - mvebu:
        Armada 38x CPU hotplug support
        drop support for prerelease Armada 375 Z1 stepping
        extended suspend support, now works on Armada 370/XP
   - omap:
        hwmod related maintenance
        prcm cleanup
   - pxa:
        initial pxa27x DT handling
   - rockchip:
        SMP support for rk3288
        add cpu frequency scaling support
   - shmobile:
        r8a7740 power domain support
        various small restart, timer, pci apmu changes
   - sunxi:
        Allwinner A80 (sun9i) earlyprintk support
   - ux500:
        power domain support

  Overall, a significant chunk of changes, coming mostly from the usual
  suspects: omap, shmobile, samsung and mvebu, all of which already
  contain a lot of platform specific code in arch/arm"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (187 commits)
  ARM: mvebu: use the cpufreq-dt platform_data for independent clocks
  soc: integrator: Add terminating entry for integrator_cm_match
  ARM: mvebu: add SDRAM controller description for Armada XP
  ARM: mvebu: adjust mbus controller description on Armada 370/XP
  ARM: mvebu: add suspend/resume DT information for Armada XP GP
  ARM: mvebu: synchronize secondary CPU clocks on resume
  ARM: mvebu: make sure MMU is disabled in armada_370_xp_cpu_resume
  ARM: mvebu: Armada XP GP specific suspend/resume code
  ARM: mvebu: reserve the first 10 KB of each memory bank for suspend/resume
  ARM: mvebu: implement suspend/resume support for Armada XP
  clk: mvebu: add suspend/resume for gatable clocks
  bus: mvebu-mbus: provide a mechanism to save SDRAM window configuration
  bus: mvebu-mbus: suspend/resume support
  clocksource: time-armada-370-xp: add suspend/resume support
  irqchip: armada-370-xp: Add suspend/resume support
  ARM: add lolevel debug support for asm9260
  ARM: add mach-asm9260
  ARM: EXYNOS: use u8 for val[] in struct exynos_pmu_conf
  power: reset: imx-snvs-poweroff: add power off driver for i.mx6
  ARM: imx: temporarily remove CONFIG_SOC_FSL from LS1021A
  ...

Pull ARM SoC cleanups from Arnd Bergmann:
 "The remaining cleanups for 3.19 are to a large part result of
  devicetree conversion nearing completion on two other platforms
  besides AT91:

   - Like AT91, Renesas shmobile is in the process to migrate to DT and
     multiplatform, but using a different approach of doing it one SoC
     at a time.  For 3.19, the r8a7791 platform and associated "Koelsch"
     board are considered complete and we remove the non-DT
     non-multiplatform support for this.

   - The ARM Versatile Express has supported DT and multiplatform for a
     long time, but we have still kept the legacy board files around,
     because not all drivers were fully working before.  We have finally
     taken the last step to remove the board files.

  Other changes in this branch are preparation for the later branches or
  just unrelated to the more interesting changes:

   - The dts files for arm64 get moved into per-vendor directories for a
     clearer structure.

   - Some dead code removal (zynq, exynos, davinci, imx)

   - Using pr_*() macros more consistently instead of printk(KERN_*) in
     some platform code"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (71 commits)
  ARM: zynq: Remove secondary_startup() declaration from header
  ARM: vexpress: Enable regulator framework when MMCI is in use
  ARM: vexpress: Remove non-DT code
  ARM: imx: Remove unneeded .map_io initialization
  ARM: dts: imx6qdl-sabresd: Fix the microphone route
  ARM: imx: refactor mxc_iomux_mode()
  ARM: imx: simplify clk_pllv3_prepare()
  ARM: imx6q: drop unnecessary semicolon
  ARM: imx: clean up machine mxc_arch_reset_init_dt reset init
  ARM: dts: imx6qdl-rex: Remove unneeded 'fsl,mode' property
  ARM: dts: imx6qdl-gw5x: Remove unneeded 'fsl,mode' property
  ARM: dts: imx6qdl-sabresd: Use IMX6QDL_CLK_CKO define
  ARM: at91: remove useless init_time for DT-only SoCs
  ARM: davinci: Remove redundant casts
  ARM: davinci: Use standard logging styles
  ARM: shmobile: r8a7779: Spelling/grammar s/entity/identity/, s/map/mapping/
  ARM: shmobile: sh7372: Spelling/grammar s/entity map/identity mapping/
  ARM: shmobile: sh73a0: Spelling/grammar s/entity map/identity mapping/
  ARM: EXYNOS: Remove unused static iomapping
  ARM: at91: fix build breakage due to legacy board removals
  ...

Pull ARM SoC cleanup on mach-at91 from Arnd Bergmann:
 "On Atmel AT91, the conversion to device tree is now considered
  complete, and all machines that were not already converted in 3.18 are
  assumed to be unused and dropped by the maintainer.

  All remaining board files that were written in C are dropped, and the
  ancient at91x40 sub-platform (based on an MMU-less ARM7) is removed
  altogether.  Cleaning up the last pieces was great fun, so I took the
  time to do some of the coding myself and removed several hundred code
  lines that ended up unused after the board files were done.

  There are still a couple of AT91 specific device drivers that are not
  converted to DT (CF, USB-OTG) and currently not working, and the
  platform itself is not "multiplatform"-enabled, but both issues are
  going to be taken care of in the 3.20 cycle.

  This is split out from the other cleanups purely based on the size of
  the branch"

* tag 'at91-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits)
  ARM: at91: remove unused board.h file
  ARM: at91: remove unneeded header files
  ARM: at91/clocksource: remove !DT PIT initializations
  ARM: at91: at91rm9200 ST initialization is now DT only
  ARM: at91: remove old AT91-specific drivers
  ARM: at91: cleanup initilisation code by removing dead code
  ARM: at91/Kconfig: select board files automatically
  ARM: at91: remove unused IRQ function declarations
  ARM: at91: remove legacy IRQ driver and related code
  ARM: at91: remove old at91-specific clock driver
  ARM: at91: remove clock data in at91sam9n12.c and at91sam9x5.c files
  ARM: at91: remove all !DT related configuration options
  ARM: at91/trivial: update Kconfig comment to mention SAMA5
  ARM: at91: always USE_OF from now on
  ARM: at91/Kconfig: remove ARCH_AT91RM9200 option for drivers
  ARM: at91: switch configuration option to SOC_AT91RM9200
  ARM: at91: remove at91rm9200 legacy board support
  ARM: at91: remove at91rm9200 legacy boards files
  ARM: at91/Kconfig: remove useless fbdev Kconfig options
  ARM: at91: remove at91sam9261/at91sam9g10 legacy board support
  ...

Pull ARM SoC non-critical bug fixes from Arnd Bergmann:
 "These are bug fixes for harmless problems that were not important
  enough to get fixed in 3.19.  This contains updates to the MAINTAINERS
  file, in particular:

   - Ben Dooks stepped down as Samsung co-maintainer (thanks Ben for
     long years of maintaining this).  Kukjin Kim, who has been doing
     the work de-facto by himself recently is now the only maintainer.

   - Liviu, Sudeep and Lorenzo from ARM now officially maintain the
     Versatile Express platform, which was orphaned (thanks for

   - Gregory Fong and Florian Fainelli help out on the Broadcom BCM7XXX
     platform

   - Ray Jui and Scott Branden are the future maintainers for the newly
     merged Broadcom Cygnus platform.  Welcome!

  In terms of actual fixes, we have the usual set of OMAP bug fixes,
  which Tony Lindgren separates out well from the other OMAP changes,
  one really ep93xx regression fix against 3.11 that didn't make it for
  3.18, a few GIC changes from Marc Zyngier as a preparation for later
  rework (the current code is wrong in a harmless way), on Tegra
  regression and one samsung spelling fix"

* tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: imx6: fix bogus use of irq_get_irq_data
  ARM: imx: irq: fix buggy usage of irq_data irq field
  MAINTAINERS: ARM Versatile Express platform, add missing pattern
  MAINTAINERS: ARM Versatile Express platform
  arm: ep93xx: add dma_masks for the M2P and M2M DMA controllers
  MAINTAINERS: Add ahci_st.c to ARCH/STI architecture
  MAINTAINERS: add entry for the GISB arbiter driver
  MAINTAINERS: update brcmstb entries
  MAINTAINERS: update email address and cleanup for exynos entry
  ARM: tegra: Re-add removed SoC id macro to tegra_resume()
  MAINTAINERS: Entry for Cygnus/iproc arm architecture
  ARM: OMAP: serial: remove last vestige of DTR_gpio support.
  ARM: OMAP2+: gpmc: Get rid of "ti,elm-id not found" warning
  ARM: EXYNOS: fix typo in static struct name "exynos5_list_diable_wfi_wfe"
  ARM: OMAP2: Remove unnecessary KERN_* in omap_phy_internal.c
  ARM: OMAP4+: Remove unused omap_l3_noc platform init
  ARM: dts: Add twl keypad map for omap3 EVM
  ARM: dts: Add twl keypad map for LDP
  ARM: dts: Fix NAND last partition size on LDP
  ARM: OMAP3: Fix errors for omap_l3_smx when booted with device tree

Pull arm64 updates from Will Deacon:
 "Here's the usual mixed bag of arm64 updates, also including some
  related EFI changes (Acked by Matt) and the MMU gather range cleanup
  (Acked by you).

  Changes include:
   - support for alternative instruction patching from Andre
   - seccomp from Akashi
   - some AArch32 instruction emulation, required by the Android folks
   - optimisations for exception entry/exit code, cmpxchg, pcpu atomics
   - mmu_gather range calculations moved into core code
   - EFI updates from Ard, including long-awaited SMBIOS support
   - /proc/cpuinfo fixes to align with the format used by arch/arm/
   - a few non-critical fixes across the architecture"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (70 commits)
  arm64: remove the unnecessary arm64_swiotlb_init()
  arm64: add module support for alternatives fixups
  arm64: perf: Prevent wraparound during overflow
  arm64/include/asm: Fixed a warning about 'struct pt_regs'
  arm64: Provide a namespace to NCAPS
  arm64: bpf: lift restriction on last instruction
  arm64: Implement support for read-mostly sections
  arm64: compat: align cacheflush syscall with arch/arm
  arm64: add seccomp support
  arm64: add SIGSYS siginfo for compat task
  arm64: add seccomp syscall for compat task
  asm-generic: add generic seccomp.h for secure computing mode 1
  arm64: ptrace: allow tracer to skip a system call
  arm64: ptrace: add NT_ARM_SYSTEM_CALL regset
  arm64: Move some head.text functions to executable section
  arm64: jump labels: NOP out NOP -> NOP replacement
  arm64: add support to dump the kernel page tables
  arm64: Add FIX_HOLE to permanent fixed addresses
  arm64: alternatives: fix pr_fmt string for consistency
  arm64: vmlinux.lds.S: don't discard .exit.* sections at link-time
  ...

Pull m68k updates from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k/mm: Eliminate memset after alloc_bootmem_pages
  nubus: Remove superfluous interrupt disable/restore

Pull Altera Nios II processor support from Ley Foon Tan:
 "Here is the Linux port for Nios II processor (from Altera) arch/nios2/
  tree for v3.19.

  The patchset has been discussed on the kernel mailing lists since
  April and has gone through 6 revisions of review.  The additional
  changes since then have been mostly further cleanups and fixes when
  merged with other trees.

  The arch code is in arch/nios2 and one asm-generic change (acked by
  Arnd)"

Arnd Bergmann says:
 "I've reviewed the architecture port in the past and it looks good in
  its latest version"
Acked-by: Arnd Bergmann <arnd@arndb.de>

* tag 'nios2-v3.19-rc1' of git://git.rocketboards.org/linux-socfpga-next: (40 commits)
  nios2: Make NIOS2_CMDLINE_IGNORE_DTB depend on CMDLINE_BOOL
  nios2: Add missing NR_CPUS to Kconfig
  nios2: asm-offsets: Remove unused definition TI_TASK
  nios2: Remove write-only struct member from nios2_timer
  nios2: Remove unused extern declaration of shm_align_mask
  nios2: include linux/type.h in io.h
  nios2: move include asm-generic/io.h to end of file
  nios2: remove include asm-generic/iomap.h from io.h
  nios2: remove unnecessary space before define
  nios2: fix error handling of irq_of_parse_and_map
  nios2: Use IS_ENABLED instead of #ifdefs to check config symbols
  nios2: Build infrastructure
  Documentation: Add documentation for Nios2 architecture
  MAINTAINERS: Add nios2 maintainer
  nios2: ptrace support
  nios2: Module support
  nios2: Nios2 registers
  nios2: Miscellaneous header files
  nios2: Cpuinfo handling
  nios2: Time keeping
  ...

Pull SCSI updates from James Bottomley:
 "This patch is the usual mix of driver updates (srp, ipr, scsi_debug,
  NCR5380, fnic, 53c974, ses, wd719x, hpsa, megaraid_sas).

  Of those, wd7a9x is new and 53c974 is a rewrite of the old tmscsim
  driver and the extensive work by Finn Thain rewrites all the NCR5380
  based drivers.

  There's also extensive infrastructure updates: a new logging
  infrastructure for sense information and a rewrite of the tagged
  command queue API and an assortment of minor updates"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (183 commits)
  scsi: set fmt to NULL scsi_extd_sense_format() by default
  libsas: remove task_collector mode
  wd719x: remove dma_cache_sync call
  scsi_debug: add Report supported opcodes+tmfs; Compare and write
  scsi_debug: change SCSI command parser to table driven
  scsi_debug: add Capacity Changed Unit Attention
  scsi_debug: append inject error flags onto scsi_cmnd object
  scsi_debug: pinpoint invalid field in sense data
  wd719x: Add firmware documentation
  wd719x: Introduce Western Digital WD7193/7197/7296 PCI SCSI card driver
  eeprom-93cx6: Add (read-only) support for 8-bit mode
  esas2r: fix an oversight in setting return value
  esas2r: fix an error path in esas2r_ioctl_handler
  esas2r: fir error handling in do_fm_api
  scsi: add SPC-3 command definitions
  scsi: rename SERVICE_ACTION_IN to SERVICE_ACTION_IN_16
  scsi: remove scsi_driver owner field
  scsi: move scsi_dispatch_cmd to scsi_lib.c
  scsi: stop passing a gfp_mask argument down the command setup path
  scsi: remove scsi_next_command
  ...

Pull device mapper updates from Mike Snitzer:

 - Significant DM thin-provisioning performance improvements to meet
   performance requirements that were requested by the Gluster
   distributed filesystem.

   Specifically, dm-thinp now takes care to aggregate IO that will be
   issued to the same thinp block before issuing IO to the underlying
   devices.  This really helps improve performance on HW RAID6 devices
   that have a writeback cache because it avoids RMW in the HW RAID
   controller.

 - Some stable fixes: fix leak in DM bufio if integrity profiles were
   enabled, use memzero_explicit in DM crypt to avoid any potential for
   information leak, and a DM cache fix to properly mark a cache block
   dirty if it was promoted to the cache via the overwrite optimization.

 - A few simple DM persistent data library fixes

 - DM cache multiqueue policy block promotion improvements.

 - DM cache discard improvements that take advantage of range
   (multiblock) discard support in the DM bio-prison.  This allows for
   much more efficient bulk discard processing (e.g.  when mkfs.xfs
   discards the entire device).

 - Some small optimizations in DM core and RCU deference cleanups

 - DM core changes to suspend/resume code to introduce the new internal
   suspend/resume interface that the DM thin-pool target now uses to
   suspend/resume active thin devices when the thin-pool must
   suspend/resume.

   This avoids forcing userspace to track all active thin volumes in a
   thin-pool when the thin-pool is suspended for the purposes of
   metadata or data space resize.

* tag 'dm-3.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (49 commits)
  dm crypt: use memzero_explicit for on-stack buffer
  dm space map metadata: fix sm_bootstrap_get_count()
  dm space map metadata: fix sm_bootstrap_get_nr_blocks()
  dm bufio: fix memleak when using a dm_buffer's inline bio
  dm cache: fix spurious cell_defer when dealing with partial block at end of device
  dm cache: dirty flag was mistakenly being cleared when promoting via overwrite
  dm cache: only use overwrite optimisation for promotion when in writeback mode
  dm cache: discard block size must be a multiple of cache block size
  dm cache: fix a harmless race when working out if a block is discarded
  dm cache: when reloading a discard bitset allow for a different discard block size
  dm cache: fix some issues with the new discard range support
  dm array: if resizing the array is a noop set the new root to the old one
  dm: use rcu_dereference_protected instead of rcu_dereference
  dm thin: fix pool_io_hints to avoid looking at max_hw_sectors
  dm thin: suspend/resume active thin devices when reloading thin-pool
  dm: enhance internal suspend and resume interface
  dm thin: do not allow thin device activation while pool is suspended
  dm: add presuspend_undo hook to target_type
  dm: return earlier from dm_blk_ioctl if target doesn't implement .ioctl
  dm thin: remove stale 'trim' message in block comment above pool_message
  ...

Pull regulator updates from Mark Brown:
 "The main thing this time around is support for suspend mode
  configuration from DT which will enable some very useful power savings
  on systems where we can't rely on the bootloader configuration.  We
  still don't really support dynamic configuration of this at runtime,
  that may come later if there is any demand.

  Summary:
   - Support for specifying the target regulation mode and voltage
     during system suspend via DT, enabling power savings in that mode.
   - Reduce the default verbosity of the logging on boot, improving boot
     times especially for systems with very large numbers of regulators.
   - Lots of cleanups and fixes for Maxim PMIC drivers.
   - New driver for Richtek RT5033"

* tag 'regulator-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (62 commits)
  regulator: core: Fix regualtor_ena_gpio_free not to access pin after freeing
  regulator: sky81452: Modify Device Tree structure
  regulator: sky81452: Modify Device Tree structure
  dt-bindings: Update documentation for "system-power-controller" and fix misspellings
  of: Rename "poweroff-source" property to "system-power-controller"
  regulator: max77686: Remove support for board files
  regulator: max77802: Remove support for board files
  regulator: max77802: Fill regulator modes translation callback
  regulator: max77802: Document binding for regulator operating modes
  regulator: of: Add support for parsing initial and suspend modes
  regulator: of: Pass the regulator description in the match table
  regulator: of: Add regulator desc param to of_get_regulator_init_data()
  regulator: Add mode mapping function to struct regulator_desc
  regulator: Document binding for initial and suspend modes
  regulator: core: Add PRE_DISABLE notification
  regulator: gpio: fix parsing of gpio list
  regulator: rpm: add support for RPM-controller SMB208
  regulator: da9063: Do not transform local IRQ to virtual
  regulator: sky81452: Modify dependent Kconfig symbol
  regulator: rt5033: Add RT5033 Regulator device driver
  ...

Pull regmap updates from Mark Brown:
 "A couple of new features this time around, nothing that should have
  any impact on most users:

   - Cleanups and optimization of the path for reading back the register
     defaults from the hardware at startup, reducing boot times for
     devices that use this (most don't, either populating on demand or
     providing defaults).
   - A bus implementation for AC'97 devices"

* tag 'regmap-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: ac97: Add generic AC'97 callbacks
  regmap: cache: Sort include headers alphabetically
  regmap: cache: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  regmap: cache: use kmalloc_array instead of kmalloc
  regmap: cache: speed regcache_hw_init() up.
  regmap: cache: fix errno in regcache_hw_init()
  regmap: cache: cleanup regcache_hw_init()
  regmap: cache: fix errno in regcache_hw_init()

Merge tag 'hwmon-for-linus-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "Notable changes:
   - new driver for NCT7802Y
   - support for TMP435, LM95233, LM95235, NCT6792D, and NXP LM75B
   - regulator support for PMBus chips, specifically LTX2978
   - support for humidity sensors to iio-hwmon bridge driver

* tag 'hwmon-for-linus-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (21 commits)
  hwmon: (tmp401) Detect TMP435 on all addresses it supports
  hwmon: (lm75) Strengthen detect function
  hwmon: (gpio-fan) Add a shutdown handler to poweroff the fans
  hwmon: (gpio-fan) Allow usage of gpio operations that may sleep
  hwmon: (tmp401) Bail out from tmp401_probe() in case of write errors
  hwmon: (tmp401) Add support for TI TMP435
  hwmon: (lm95234) Add support for LM95233
  hwmon: (lm95245) Add support for LM95235
  hwmon: (ina2xx) bail-out from ina2xx_probe() in case of configuration errors
  hwmon: (nct6775) Add blank lines after declarations
  hwmon: (nct6775) Add support for NCT6792D
  hwmon: (nct6775) Documentation updates
  hwmon: (lm75) Add support for the NXP LM75B
  hwmon: Driver for Nuvoton NCT7802Y
  hwmon: (ibmpowernv) Convert to module_platform_driver
  hwmon: (ibmpowernv) Use platform 'id_table' to probe the device
  hwmon: (iio_hwmon) Add support for humidity sensors
  hwmon: (ltc2978) Add regulator support
  hwmon: (pmbus) Add regulator support
  hwmon: (pmbus) add helpers for byte write and read modify write
  ...

Pull EDAC updates from Borislav Petkov:
 "EDAC updates all over the place:

   - Enablement for AMD F15h models 0x60 CPUs.  Most notably DDR4 RAM
     support.  Out of tree stuff is adding the required PCI IDs.  From
     Aravind Gopalakrishnan.

   - Enable amd64_edac for 32-bit due to popular demand.  From Tomasz
     Pala.

   - Convert the AMD MCE injection module to debugfs, where it belongs.

   - Misc EDAC cleanups"

* tag 'edac_for_3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, MCE, AMD: Correct formatting of decoded text
  EDAC, mce_amd_inj: Add an injector function
  EDAC, mce_amd_inj: Add hw-injection attributes
  EDAC, mce_amd_inj: Enable direct writes to MCE MSRs
  EDAC, mce_amd_inj: Convert mce_amd_inj module to debugfs
  EDAC: Delete unnecessary check before calling pci_dev_put()
  EDAC, pci_sysfs: remove unneccessary ifdef around entire file
  ghes_edac: Use snprintf() to silence a static checker warning
  amd64_edac: Build module on x86-32
  EDAC, MCE, AMD: Add decoding table for MC6 xec
  amd64_edac: Add F15h M60h support
  {mv64x60,ppc4xx}_edac,: Remove deprecated IRQF_DISABLED
  EDAC: Sync memory types and names
  EDAC: Add DDR3 LRDIMM entries to edac_mem_types
  x86, amd_nb: Add device IDs to NB tables for F15h M60h
  pci_ids: Add PCI device IDs for F15h M60h

Pull MFD updates from Lee Jones:
 "Changes to the core:
   - Honour PLATFORM_DEVID_NONE and PLATFORM_DEVID_AUTO dev IDs

  Changes to existing drivers:
   - IRQ additions/fixes; axp20x, da9063-core
   - Code simplification; i2c-dln2
   - Regmap additions/fixes; max77693
   - Error checking/handling improvements; dln2, db8500-prcmu
   - Bug fixes; dln2, wm8350-core
   - DT support/documentation; max77693, max77686, tps65217, twl4030-power,
                               gpio-tc3589x
   - Decouple syscon interface from platform devices
   - Use MFD hotplug registration; rtsx_usb, viperboard, hid-sensor-hub
   - Regulator fixups; sec-core
   - Power Management additions/fixes; rts5227, tc6393xb
   - Remove relic/redundant code; ab8500-sysctrl, lpc_sch, max77693-private
   - Clean-up/coding style changes; tps65090
   - Clk additions/fixes; tc6393xb, tc6387xb, t7l66xb
   - Add USB-SPI support; dln2
   - Trivial changes; max14577, arizona-spi, lpc_sch, wm8997-tables, wm5102-tables
                      wm5110-tables, axp20x, atmel-hlcdc, rtsx_pci

  New drivers/supported devices:
   - axp288 PMIC support added to axp20x
   - s2mps13 support added to sec-core
   - New support for Diolan DLN-2
   - New support for atmel-hlcdc"

* tag 'mfd-for-linus-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (55 commits)
  mfd: rtsx: Add func to split u32 into register
  mfd: atmel-hlcdc: Add Kconfig option description and name
  mfd: da9063: Get irq base dynamically before registering device
  mfd: max14577: Fix obvious typo in company name in copyright
  mfd: axp20x: Constify axp20x_acpi_match and rid unused warning
  mfd: t7l66xb: prepare/unprepare clocks
  mfd: tc6387xb: prepare/unprepare clocks
  mfd: dln2: add support for USB-SPI module
  mfd: wm5110: Add missing registers for AIF2 channels 3-6
  mfd: tc3589x: get rid of static base
  mfd: arizona: Document HP_CTRL_1L and HP_CTRL_1R registers
  mfd: wm8997: Mark INTERRUPT_STATUS_2_MASK as readable
  mfd: tc6393xb: Prepare/unprepare clocks
  mfd: tps65090: Fix bonkers indenting strategy
  mfd: tc6393xb: Fail ohci suspend if full state restore is required
  mfd: lpc_sch: Don't call mfd_remove_devices()
  mfd: wm8350-core: Fix probable mask then right shift defect
  mfd: ab8500-sysctrl: Drop ab8500_restart
  mfd: db8500-prcmu: Provide sane error path values
  mfd: db8500-prcmu: Check return of devm_ioremap for error
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Consolidation and cleanups.
   - Some improvements regarding error handling.
   - Increase maximum amount of block devices.
   - Use correct OCR mask for SDIO when restoring power.
   - Fix prepared requests while doing BKOPS.
   - Convert to modern PM ops.
   - Add mmc_send_tuning() API and convert some hosts to use it.

  MMC host:
   - toshsd: New Toshiba PCI SD controller driver.
   - sdhci: 64-bit ADMA support.
   - sdhci: Some regulator fixes.
   - sdhci: HS400 support.
   - sdhci: Various fixes cleanups.
   - atmel-mci: Modernization and cleanups.
   - atmel-mci: Runtime PM support.
   - omap_hsmmc: Modernization and cleanups.
   - omap_hsmmc: Fix UHS card with DDR50 support.
   - dw_mmc: Support for ARM64 and Exynos 7 variant.
   - dw_mmc: Add support for IMG Pistachio variant.
   - dw_mmc: Various fixes and cleanups.
   - mvsdio: DMA fixes.
   - mxs-mmc: Modernization and cleanups.
   - mxcmmc: Various fixes"

* tag 'mmc-v3.19-1' of git://git.linaro.org/people/ulf.hansson/mmc: (126 commits)
  mmc: sdhci-msm: Convert to mmc_send_tuning()
  mmc: sdhci-esdhc-imx: Convert to mmc_send_tuning()
  mmc: core: Let mmc_send_tuning() to take struct mmc_host* as parameter
  mmc: queue: Improve error handling during allocation of bounce buffers
  mmc: sdhci-acpi: Add two host capabilities for Intel
  mmc: sdhci-pci: Add two host capabilities for BYT
  mmc: sdhci-acpi: Add SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
  mmc: sdhci-pci: Add SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC to BYT
  mmc: atmel-mci: use probe deferring if dma controller is not ready yet
  mmc: atmel-mci: stop using specific initcall
  mmc: atmel-mci: remove __init/__exit attributes
  mmc: atmel-mci: remove useless DMA stuff for non-dt devices
  mmc: omap_hsmmc: Fix UHS card with DDR50 support
  mmc: core: add core-level function for sending tuning commands
  mmc: core: hold SD Clock before CMD11 during Signal
  mmc: mxs-mmc: Check for clk_prepare_enable() error
  mmc: mxs-mmc: Propagate the real error
  mmc: mxs-mmc: No need to do NULL check on 'iores'
  mmc: dw_mmc: Add support for IMG Pistachio
  mmc: mxs-mmc: Simplify PM hooks
  ...

The at91 cleanups changed a lot of files, this merges in the
latest cleanups to resolve the conflicts

Conflicts:
	arch/arm/mach-at91/at91sam9260.c
	arch/arm/mach-at91/at91sam9261.c
	arch/arm/mach-at91/at91sam9263.c
	arch/arm/mach-at91/clock.c
	arch/arm/mach-at91/clock.h
	drivers/rtc/Kconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This resolves a nonobvious merge conflict that I got wrong the
first time.

* brcm/stb-smp-uart:
  bus: brcmstb_gisb: save and restore GISB timeout
  bus: brcmstb_gisb: register the fault code hook
  ARM: brcmstb: Kconfig: drop unneeded symbol selections
  ARM: brcmstb: reintroduce SMP support
  ARM: brcmstb: add debug UART for earlyprintk support

Conflicts:
	drivers/bus/brcmstb_gisb.c
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>

Conflicts:
	drivers/scsi/scsi_debug.c

Agreed and tested resolution to a merge problem between a fix in scsi_debug
and a driver update
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

TMP435 supports a range of I2C addresses, not just 0x4c.

Cc: Patrick Titiano <ptitiano@baylibre.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Add helper function to write u32 to registers, if we want to put u32
value to 4 continuous register, this can help us reduce tedious work.
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>