- 01 Oct, 2018 39 commits
-
-
Lorenzo Bianconi authored
Move wait_for_wpdma utility routine in mt76x02_dma.h in order to be reused by mt76x0 driver. Moreover add the possibility to specify the timeout value in wait_for_wpdma signature Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Use mt76_poll utility routine in mt76x0_set_wlan_state to check if the PLL/XTAL is ready Signed-off-by:
-
Felix Fietkau authored
If the WLAN core is still active during initialization, it might cause the MCU or DMA to hang. This can happen during soft reboot, so disable the core + clock early to avoid this issue. Signed-off-by: -
Stanislaw Gruszka authored
TP-LINK Archer T1U do not support 2.4GHz band despite EEPROM reports that. Add quirk to mask out 2.4GHz support. Reported-by:
Sid Hayn <sidhayn@gmail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Hauke Mehrtens authored
mt76 uses __skb_pad() with free_on_error set to true, this is the same as calling skb_pad(). This patch does not change any functionality, but it makes it easier to backport this driver in backports, because skb_pad() is also available in older kernel versions. Fixes: b40b15e1 ("mt76: add usb support to mt76 layer") Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Lorenzo Bianconi authored
Add rx_page_lock spinlock in order to make rx page fragment access atomic. This patch fixes the following crash that occasionally occurs during module loading/unloading BUG: unable to handle kernel paging request at ffff9f8322e19000 PGD 27ba01067 P4D 27ba01067 PUD 27ddba063 PMD 263b35063 PTE 8000000262e19061 Oops: 0003 [#1] SMP PTI CPU: 2 PID: 1766 Comm: systemd-udevd Not tainted 4.19.0-rc5+ #6 Hardware name: ASUSTeK COMPUTER INC. ESC2000 G2/Z9PE-D8 WS, BIOS 0405 03/19/2012 RIP: 0010:__memcpy+0x12/0x20 RSP: 0018:ffffba13849b3ad8 EFLAGS: 00010246 RAX: ffff9f8322e17004 RBX: 00000000000038f0 RCX: 000000000000031f RDX: 0000000000000000 RSI: ffffba13844cf058 RDI: ffff9f8322e18ffc RBP: 0000000000010c6c R08: 0000000000000000 R09: 0000607ec0000000 R10: 0000000000000003 R11: 0000000000003e2e R12: ffff9f8324cd9540 R13: 0000000000000000 R14: ffffba13849b3b30 R15: ffff9f8322e17000 FS: 00007fadec85b880(0000) GS:ffff9f833fa80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff9f8322e19000 CR3: 0000000263428001 CR4: 00000000000606e0 Call Trace: mt76x02u_mcu_fw_send_data+0x16c/0x270 [mt76x02_usb] mt76x0u_probe+0x35a/0x598 [mt76x0u] usb_probe_interface+0x113/0x310 really_probe+0x1c8/0x400 driver_probe_device+0x5c/0x130 __driver_attach+0xec/0x110 bus_for_each_dev+0x50/0x90 bus_add_driver+0x1c0/0x280 driver_register+0x5b/0xe0 usb_register_driver+0x7c/0x140 do_one_initcall+0x44/0x19b do_init_module+0x5a/0x210 load_module+0x175c/0x1bc0 __do_sys_finit_module+0x97/0xc0 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fadeb6f1809 RSP: 002b:00007ffe548f9f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 00007fadebdf0d89 RCX: 00007fadeb6f1809 RDX: 0000000000000000 RSI: 00007fadebdf0d89 RDI: 0000000000000006 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000006 R11: 0000000000000246 R12: 0000560b9ef58ab0 R13: 0000560b9ef29800 R14: 0000560b9ef59040 R15: 0000000000020000 Fixes: c12128ce ("mt76: use a per rx queue page fragment cache") Reported-by:
-
Davide Caratti authored
print fw_ver and build_ver members of struct mt76x02_fw_header, similarly to what appears in the output of 'dmesg' when the MCU firmware is loaded. Reported-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Felix Fietkau authored
Fix source files using MODULE_* macros without including linux/module.h Signed-off-by: -
Lorenzo Bianconi authored
Add mt76x0_phy_set_txpower routine in order to configure base and per rate tx power gain. Moreover take into account txpower_conf in order to limit the tx power gain according to the bound provided by mac80211 Signed-off-by:
-
Lorenzo Bianconi authored
Use mt76 shared debugfs implementation and remove duplicated code in mt76x0 driver Signed-off-by:
-
Lorenzo Bianconi authored
In order to unify eeprom parsing between mt76x0 and mt76x2 drivers, remove eeprom pointer dependency from mt76x0_get_power_info routine. Remove mt76x0_eeprom_params since it is now an empty structure Signed-off-by:
-
Lorenzo Bianconi authored
In order to unify eeprom parsing between mt76x0 and mt76x2 drivers, remove eeprom pointer dependency from mt76x0_set_tx_power_per_rate. Moreover use mt76_rate_power to store power vs rate calibration data. Signed-off-by:
-
Lorenzo Bianconi authored
Remove mt76x0_extra_power_over_mac and mt76x0_phy_set_tx_power routines since they are not actually used and tx power handling will be unified with mt76x2 driver Signed-off-by:
-
Lorenzo Bianconi authored
Move mt76x02_rate_power_val and mt76x2_sign_extend_optional utility routines in mt76x02_eeprom.h in order to reuse them in mt76x0 eeprom parsing Signed-off-by:
-
Lorenzo Bianconi authored
Move rate_txpower handler in mt76 debugfs in order to be reused in mt76x0 driver and remove duplicated code Signed-off-by:
-
Lorenzo Bianconi authored
Add mt76x02_phy_set_txpower utility routine in mt76x02_phy.c in order to be reused in mt76x0 tx power management code. Moreover move following routines in mt76x02-lib module: - mt76x02_tx_power_mask - mt76x02_get_max_rate_power - mt76x02_limit_rate_power - mt76x02_add_rate_power_offset Signed-off-by:
-
Lorenzo Bianconi authored
Move mt76_rate_power data structure from mt76x2_dev to mt76_dev in order to share it with mt76x0 driver. Moreover move txpower_conf and txpower_cur in mt76_dev Signed-off-by:
-
Stanislaw Gruszka authored
We need to return bool value in mt76x02_wait_for_mac. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 2735a6dd ("mt76: unify wait_for_mac") Signed-off-by:
-
Lorenzo Bianconi authored
Remove not useful WARN_ON macros in mt76u_get_rx_entry_len routine since corrupted frames should just be silently discarded Signed-off-by:
-
Lorenzo Bianconi authored
Move mt76x2_tssi_enabled and mt76x02_temp_tx_alc_enabled in mt76x02_eeprom.h in order to be reused in mt76x0 driver Signed-off-by:
-
Lorenzo Bianconi authored
Unify parse hw capabilities with mt76x2 driver using mt76x02_eeprom_parse_hw_cap utility routine available in mt76x02-lib module Signed-off-by:
-
Lorenzo Bianconi authored
Move mt76x02_eeprom_parse_hw_cap utility routine in mt76x02-lib module in order to be reused in mt76x0 driver Signed-off-by:
-
Lorenzo Bianconi authored
Unify frequency offset parsing with mt76x2 driver using eeprom utility routines available in mt76x02-lib module Signed-off-by:
-
Lorenzo Bianconi authored
Unify temperature offset parsing with mt76x2 driver using eeprom utility routines available in mt76x02-lib module Signed-off-by:
-
Lorenzo Bianconi authored
Unify rssi_offset parsing with mt76x2 driver using eeprom utility routines available in mt76x02-lib module Signed-off-by:
-
Lorenzo Bianconi authored
Unify lna gain parsing with mt76x2 driver using eeprom utility routines available in mt76x02-lib module Signed-off-by:
-
Lorenzo Bianconi authored
Add mt76x02_get_rx_gain and mt76x02_get_lna_gain utility routines for rx gain parsing. mt76x02_get_rx_gain and mt76x02_get_lna_gain will be reused for eeprom parsing in mt76x0 driver Signed-off-by:
-
Lorenzo Bianconi authored
Remove mt76x0_set_country_reg routine for the moment since it is partial and it is not actually used Signed-off-by:
-
Lorenzo Bianconi authored
Move mt76x2_ext_pa_enabled utility routine in mt76x02_eeprom.c and remove duplicated code. This is a preliminary patch to unify eeprom code between mt76x2 and mt76x0 driver Signed-off-by:
-
Lorenzo Bianconi authored
Move mt76x2_efuse_read and mt76x2_get_efuse_data in mt76x02_eeprom.c in order to be reused in mt76x0 driver for eeprom parsing Signed-off-by:
-
Lorenzo Bianconi authored
Move mt76x02_mac_setaddr utility routine in mt76x02-lib module and remove duplicated code. This is a preliminary patch to unify eeprom code between mt76x2 and mt76x0 driver Signed-off-by:
-
Lorenzo Bianconi authored
Move mt76x2_eeprom_get utility routine in mt76x02_eeprom.h since it will be used to parse mt76x0 eeprom in order to unify eeprom support between mt76x2 and mt76x0 drivers Signed-off-by:
-
Lorenzo Bianconi authored
Move shared eeprom utility routines in mt76x02_eeprom.h and remove duplicated code Signed-off-by:
-
Lorenzo Bianconi authored
Move mt76x2 and mt76x0 common definitions in mt76x02_eeprom.h and remove duplicated code Signed-off-by:
-
Felix Fietkau authored
Add stbc tx power eeprom parsing support for mt76x2 driver. When writing power entries, make a distinction between rates that are read from the same EEPROM value, but have separate register entries. No effect on runtime behavior, but preparation for unification with mt76x0 and for placing restrictions on individual rate power limits Signed-off-by:
-
Lorenzo Bianconi authored
Move seq_put_array utility routine in mt76-core module in order to be reused in mt76x0 driver Signed-off-by:
-
Lorenzo Bianconi authored
Add pci load firmware routine. Move some shared mcu definitions in mt76x02_mcu.h Signed-off-by:
-
Lorenzo Bianconi authored
Add mt7650 PCI id found on ASUS rt-51ac to pci_device_id table Signed-off-by:
-
Lorenzo Bianconi authored
Fix tx power configuration for VHT 1SS/STBC mcs 9 since in MT_TX_PWR_CFG_{8,9} mcs 8,9 bits are GENMASK(21,16) and GENMASK(29,24) while GENMASK(15,6) are marked as reserved Fixes: 7bc04215 ("mt76: add driver code for MT76x2e") Signed-off-by:
-
- 20 Sep, 2018 1 commit
-
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/quantenna/qtnfmac/cfg80211.c: In function 'qtnf_dump_survey': drivers/net/wireless/quantenna/qtnfmac/cfg80211.c:694:19: warning: variable 'vif' set but not used [-Wunused-but-set-variable] Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
