- 04 May, 2018 2 commits
-
-
Jia-Ju Bai authored
adv7511_probe() is never called in atomic context. This function is only set as ".probe" in struct i2c_driver. Despite never getting called from atomic context, adv7511_probe() calls mdelay() to busily wait. This is not necessary and can be replaced with usleep_range() to avoid busy waiting. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/1523435622-4329-1-git-send-email-baijiaju1990@gmail.com
-
Peter Rosin authored
Could perhaps prevent some confusion. Signed-off-by:
Peter Rosin <peda@axentia.se> Reviewed-by:
-
- 03 May, 2018 17 commits
-
-
Eric Anholt authored
This driver will be used to support Mesa on the Broadcom 7268 and 7278 platforms. V3D 3.3 introduces an MMU, which means we no longer need CMA or vc4's complicated CL/shader validation scheme. This massively changes the GEM behavior, so I've forked off to a new driver. v2: Mark SUBMIT_CL as needing DRM_AUTH. coccinelle fixes from kbuild test robot. Drop personal git link from MAINTAINERS. Don't double-map dma-buf imported BOs. Add kerneldoc about needing MMU eviction. Drop prime vmap/unmap stubs. Delay mmap offset setup to mmap time. Use drm_dev_init instead of _alloc. Use ktime_get() for wait_bo timeouts. Drop drm_can_sleep() usage, since we don't modeset. Switch page tables back to WC (debug change to coherent had slipped in). Switch drm_gem_object_unreference_unlocked() to drm_gem_object_put_unlocked(). Simplify overflow mem handling by not sharing overflow mem between jobs. v3: no changes v4: align submit_cl to 64 bits (review by airlied), check zero flags in other ioctls. Signed-off-by:Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v4) Acked-by: Dave Airlie <airlied@linux.ie> (v3, requested submit_cl change) Link: https://patchwork.freedesktop.org/patch/msgid/20180430181058.30181-3-eric@anholt.net
-
Eric Anholt authored
These OpenGL ES GPUs are present in the 7268 and 7278 set top box chips. v2: no changes v3: move to gpu/, fix typo Signed-off-by:
Rob Herring <robh@kernel.org>
-
Eric Anholt authored
I had originally asked Stefan Schake to drop the pad field from the syncobj changes that just landed, because I couldn't come up with a reason to align to 64 bits. Talking with Dave Airlie about the new v3d driver's submit ioctl, we came up with a reason: sizeof() on 64-bit platforms may align to 64 bits, in which case the userspace will be submitting the aligned size and the final 32 bits won't be zero-padded by the kernel. If userspace doesn't zero-fill, then a future ABI change adding a 32-bit field at the end could potentially cause the kernel to read undefined data from old userspace (our userspace happens to use structure initialization that zero-fills, but as a general rule we try not to rely on that in the kernel). Signed-off-by:
Stefan Schake <stschake@gmail.com>
-
Linus Walleij authored
Commit a30933c27602 ("drm/pl111: Support the Versatile Express") Added a second module using the builtin_platform_driver() call, which works fine as long as you do not try to build the PL111 driver as a module, because a module can only have one initcall and cause the following build bug: (...) multiple definition of `init_module' (...) Reported-by:Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Eric Anholt <eric@anholt.net> Cc: Robin Murphy <robin.murphy@arm.com> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180503140431.5798-1-linus.walleij@linaro.org
-
Daniel Vetter authored
With the ioctl and driver prep done, we can remove everything else. Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20180420065159.4531-4-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
It's going away. v2: Try harder to find them all. Reviewed-by:
-
Satendra Singh Thakur authored
In the func drm_atomic_set_crtc_for_plane, with the current code, if crtc of the plane_state and crtc passed as argument to the func are same, entire func will executed in vein. It will get state of crtc and clear and set the bits in plane_mask. All these steps are not required for same old crtc. Ideally, we should do nothing in this case, this patch handles the same, and causes the program to return without doing anything in such scenario. Signed-off-by:
Satendra Singh Thakur <satendra.t@samsung.com> Cc: Madhur Verma <madhur.verma@samsung.com> Cc: Hemanshu Srivastava <hemanshu.s@samsung.com> Signed-off-by:
-
Daniel Vetter authored
I shouldn't have pushed this, CI was right - I failed to remove the BUG_ON(!ops->wait); Reported-by:
Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
-
Daniel Vetter authored
The trivial enable_signaling implementation matches the default code. v2: Fix up commit message to match patch better (Eric). Cc: Eric Anholt <eric@anholt.net> Reviewed-by:
-
Daniel Vetter authored
dma_fence_default_wait is the default now, same for the trivial enable_signaling implementation. Reviewed-by:
-
Daniel Vetter authored
Almost everyone uses dma_fence_default_wait. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Daniel Vetter authored
When this was introduced in commit a519435a Author: Christian König <christian.koenig@amd.com> Date: Tue Oct 20 16:34:16 2015 +0200 dma-buf/fence: add fence_wait_any_timeout function v2 there was a restriction added that this only works if the dma-fence uses the dma_fence_default_wait hook. Which works for amdgpu, which is the only caller. Well, until you share some buffers with e.g. i915, then you get an -EINVAL. But there's really no reason for this, because all drivers must support callbacks. The special ->wait hook is only as an optimization; if the driver needs to create a worker thread for an active callback, then it can avoid to do that if it knows that there's a process context available already. So ->wait is just an optimization, just using the logic in dma_fence_default_wait() should work for all drivers. Let's remove this restriction. Signed-off-by:
-
Daniel Vetter authored
Many drivers have a trivial implementation for ->enable_signaling. Let's make it optional by assuming that signalling is already available when the callback isn't present. Signed-off-by:
-
Daniel Vetter authored
Noticed while I was typing docs. Entirely unused. v2: Remove reference in @timeline_value_str too. While at it clarify why timeline_value_str has a fence parameter - we don't have an explicit timeline structure unfortunately. Cc: Eric Anholt <eric@anholt.net> Reviewed-by: Christian König <christian.koenig@amd.com> (v1) Reviewed-by:
-
Daniel Vetter authored
Control nodes are no more! Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
-
Daniel Vetter authored
Control nodes are no more! Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
-
Daniel Vetter authored
We've disabled control nodes in commit 8a357d10 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Oct 28 10:10:50 2016 +0200 drm: Nerf DRM_CONTROL nodes and there was only a minor uapi break that we've paper over with commit 6449b088 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Dec 9 14:56:56 2016 +0100 drm: Add fake controlD* symlinks for backwards compat Since then Keith has also added real control nodes with a proper&useable uapi in the form of drm leases. It's time to remove the control node leftovers. Cc: Keith Packard <keithp@keithp.com> Reviewed-by:
-
- 02 May, 2018 5 commits
-
-
Ville Syrjälä authored
An overeager sed has corrupted the drm_rect_rotation_inv() documentation. Fix it up. Looks like it wasn't entirely correct before the sed fail either. We were missing _rect_ from the function names, which also explains why the sed hit these by accident. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180426141631.15798-1-ville.syrjala@linux.intel.comReviewed-by:
-
Linus Walleij authored
The Versatile Express has 8 MB of dedicated video RAM (VRAM) on the motherboard, which is what we should be using for the PL111 if available. On this platform, the memory backplane is constructed so that only this memory will work properly with the CLCD on the motherboard, using any other memory area just gives random snow on the display. The CA9 Versatile Express also has a PL111 instance on its core tile that can address all memory, and this does not have the restriction. The memory is assigned to the device using the memory-region device tree property and a "shared-dma-pool" reserved memory pool like this: reserved-memory { #address-cells = <1>; #size-cells = <1>; ranges; vram: vram@48000000 { compatible = "shared-dma-pool"; reg = <0x48000000 0x00800000>; no-map; }; }; clcd@1f000 { compatible = "arm,pl111", "arm,primecell"; (...) memory-region = <&vram>; }·; Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Reviewed-by:Robin Murphy <robin.murphy@arm.com> Signed-off-by:
-
Linus Walleij authored
The Versatile Express uses a special configuration controller deeply embedded in the system motherboard FPGA to multiplex the two to three (!) display controller instances out to the single SiI9022 bridge. Set up an extra file with the logic to probe to the FPGA mux register on the system controller bus, then parse the device tree to see if there is a CLCD or HDLCD instance on the core tile (also known as the daughterboard) by looking in the root of the device tree for compatible nodes. - If there is a HDLCD on the core tile, and there is a driver for it, we exit probe and deactivate the motherboard CLCD. We do not touch the DVI mux in this case, to make sure we don't break HDLCD. - If there is a CLCD on both the motherboard and the core tile (only the CA9 has this) the core tile CLCD takes precedence and get muxed to the DVI connector. - Only if there is no working graphics on the core tile, the motherboard CLCD is probed and muxed to the DVI connector. Core tile graphics should always take precedence as it can address all memory and is also faster, however the motherboard CLCD is good to have around for diagnostics and testing. It is possible to test the motherboard CLCD by setting the status = "disabled" property on the core tile CLCD or HDLCD. Scale down the Versatile Express to 16BPP so we can support a 1024x768 display despite the bus bandwidth restrictions on this platform. (The motherboard CLCD supports slightly lower resolution.) Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Acked-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in DRM_ERROR error message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Daniel Vetter authored
- Switch to inline member docs for dma_fence_ops. - Mild polish all around. - hyperlink all the things! v2: - Remove the various [in] annotations, they seem really uncommon in kerneldoc and look funny. v3: Linebreak the "Returns" part of the @fill_driver_data kerneldoc (Eric). Signed-off-by:
-
- 01 May, 2018 1 commit
-
-
Kristian H. Kristensen authored
Blending win0 with the background color doesn't seem to work correctly. We only get the background color, no matter the contents of the win0 framebuffer. However, blending pre-multiplied color with the default opaque black default background color is a no-op, so we can just disable blending to get the correct result. Signed-off-by:
Kristian H. Kristensen <hoegsberg@chromium.org> Cc: Sandy Huang <hjc@rock-chips.com> Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
- 30 Apr, 2018 8 commits
-
-
Stefan Schake authored
This doesn't require any additional functionality from the driver but is a prerequisite to userland calling the syncobj ioctls. Signed-off-by:
-
Stefan Schake authored
Allow specifying a syncobj on render job submission where we store the fence for the job. This gives userland flexible access to the fence. v2: Use 0 as invalid syncobj to drop flag (Eric) Don't reintroduce the padding (Eric) Signed-off-by: -
Stefan Schake authored
Allow userland to specify a syncobj that is waited on before a render job starts processing. v2: Use 0 as invalid syncobj to drop flag (Eric) Drop extra newline (Eric) Signed-off-by: -
Eric Anholt authored
It turns out that I had just mistaken what type of write the register writes were supposed to be, using DCS instead of generic long writes. Switching to transactions instead of using the atmel as a bridge also seems to resolve the sparkling pixels problem I've had. Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Acked-by:
Thierry Reding <treding@nvidia.com>
-
Eric Anholt authored
It seems that trying to go from unlatched to unlatched will time out waiting for STOP, and we can just skip that. Signed-off-by:
-
Vaishali Thakkar authored
Sparse complains with following warning: drivers/gpu/drm/vc4/vc4_v3d.c:222:1: warning: symbol 'vc4_allocate_bin_bo' was not declared. Should it be static? Make vc4_allocate_bin static as it is not used outside of vc4_v3d.c. Signed-off-by:
Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by:
-
Eric Anholt authored
Some drivers leave these unimplemented, so don't make them have unimplemented stubs. Signed-off-by:
-
Tom Callaway authored
The PiTFT (ili9340) has a hardware reset circuit that resets only on power-on and not on each reboot through a gpio like the rpi-display does. As a result, we need to always apply the rotation value regardless of the display "on/off" state. Moved the rotation setting code below out_enable:. Signed-off-by:
Tom Callaway <tcallawa@redhat.com> Reviewed-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
-
- 27 Apr, 2018 7 commits
-
-
Ville Syrjälä authored
drm_property_add_enum() can calculate the index itself just fine, so no point in having the caller pass it in. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
Manasi Navare authored
No functional changes in this patch. The SDP Header is a generic header for secondary data packets for both eDP and DP so call it dp_sdp_header. This header gets used for different SDP types already defined. Also header bytes 2 and 3 are secondary data packet specific header bytes. So change the comment to indicate the same. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Philippe CORNU authored
"make C=1" returns 2 warnings in ltdc_plane_create() ("Using plain integer as NULL pointer"). This patch fixes them. Signed-off-by:Philippe Cornu <philippe.cornu@st.com> Reviewed-by:
Yannick Fertré <yannick.fertre@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180419132804.8317-1-philippe.cornu@st.com
-
Philippe CORNU authored
Add mode_valid() function to filter modes according to available pll clock values and "preferred" modes. It is particularly useful for hdmi modes that require precise pixel clocks. Note that "preferred" modes are always accepted: - this is important for panels because panel clock tolerances are bigger than hdmi ones and there is no reason to not accept them (the fps may vary a little but it is not a problem). - the hdmi preferred mode will be accepted too, but userland will be able to use others hdmi "valid" modes if necessary. Signed-off-by:
-
Philippe CORNU authored
When a driver related to one of the endpoints is deferred due to probe dependencies (i2c, spi...) but the other one is ready, ltdc probe continues and the deferred driver will never be probed again. The fix consists in waiting for all deferred endpoints before continuing the ltdc probe. Signed-off-by:
-
Gerd Hoffmann authored
These days drm core checks function pointers everywhere before calling them. So we can drop a bunch of dummy functions now. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Dave Airlie <airlied@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180420071904.24276-5-kraxel@redhat.com
-
Gerd Hoffmann authored
The encoder callbacks are only called in case the video mode changes. So any layout changes without mode changes will go unnoticed. Add qxl_crtc_update_monitors_config(), based on the old qxl_write_monitors_config_for_encoder() function. Hook it into the enable, disable and flush atomic crtc callbacks. Remove monitors_config updates from all other places. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1544322Signed-off-by:
-
