- 10 Nov, 2018 40 commits
-
-
Nikolay Aleksandrov authored
commit 0fe5119e upstream. Recently a check was added which prevents marking of routers with zero source address, but for IPv6 that cannot happen as the relevant RFCs actually forbid such packets: RFC 2710 (MLDv1): "To be valid, the Query message MUST come from a link-local IPv6 Source Address, be at least 24 octets long, and have a correct MLD checksum." Same goes for RFC 3810. And also it can be seen as a requirement in ipv6_mc_check_mld_query() which is used by the bridge to validate the message before processing it. Thus any queries with :: source address won't be processed anyway. So just remove the check for zero IPv6 source address from the query processing function. Fixes: 5a2de63f ("bridge: do not add port to router list when receives query with source 0.0.0.0") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hangbin Liu authored
commit 5a2de63f upstream. Based on RFC 4541, 2.1.1. IGMP Forwarding Rules The switch supporting IGMP snooping must maintain a list of multicast routers and the ports on which they are attached. This list can be constructed in any combination of the following ways: a) This list should be built by the snooping switch sending Multicast Router Solicitation messages as described in IGMP Multicast Router Discovery [MRDISC]. It may also snoop Multicast Router Advertisement messages sent by and to other nodes. b) The arrival port for IGMP Queries (sent by multicast routers) where the source address is not 0.0.0.0. We should not add the port to router list when receives query with source 0.0.0.0. Reported-by:
Ying Xu <yinxu@redhat.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Rasmus Villemoes authored
[ Upstream commit da15fc2f ] The Yocto build system does a 'make clean' when rebuilding due to changed dependencies, and that consistently fails for me (causing the whole BSP build to fail) with errors such as | find: '[...]/perf/1.0-r9/perf-1.0/plugin_mac80211.so': No such file or directory | find: '[...]/perf/1.0-r9/perf-1.0/plugin_mac80211.so': No such file or directory | find: find: '[...]/perf/1.0-r9/perf-1.0/libtraceevent.a''[...]/perf/1.0-r9/perf-1.0/libtraceevent.a': No such file or directory: No such file or directory | [...] | find: cannot delete '/mnt/xfs/devel/pil/yocto/tmp-glibc/work/wandboard-oe-linux-gnueabi/perf/1.0-r9/perf-1.0/util/.pstack.o.cmd': No such file or directory Apparently (despite the comment), 'make clean' ends up launching multiple sub-makes that all want to remove the same things - perhaps this only happens in combination with a O=... parameter. In any case, we don't lose much by explicitly disabling the parallelism for the clean target, and it makes automated builds much more reliable. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180705131527.19749-1-linux@rasmusvillemoes.dkSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sasha Levin authored
This reverts commit ad8b1ffc. From Florian Westphal <fw@strlen.de>: It causes kernel crash for locally generated ipv6 fragments when netfilter ipv6 defragmentation is used. The faulty commit is not essential for -stable, it only delays netns teardown for longer than needed when that netns still has ipv6 frags queued. Much better than crash :-/ Signed-off-by:
-
Kimmo Rautkoski authored
[ Upstream commit d616f81c ] Added support for is25wp032, is25wp064 and is25wp128. Signed-off-by:
Kimmo Rautkoski <ext-kimmo.rautkoski@vaisala.com> Reviewed-by:
Marek Vasut <marek.vasut@gmail.com> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> [ Adrian Bunk: Trivial adaption to changed context. ] Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
Khazhismel Kumykov authored
[ Upstream commit ac081c3b ] On non-preempt kernels this loop can take a long time (more than 50 ticks) processing through entries. Link: http://lkml.kernel.org/r/20181010172623.57033-1-khazhy@google.comSigned-off-by:
Khazhismel Kumykov <khazhy@google.com> Acked-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Arthur Kiyanovski authored
[ Upstream commit 78a55d05 ] napi poll functions should be initialized before running request_irq(), to handle a rare condition where there is a pending interrupt, causing the ISR to fire immediately while the poll function wasn't set yet, causing a NULL dereference. Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 298bc15b ] Move the out-of-order and duplicate ACK packet check to before the call to rxrpc_input_ackinfo() so that the receive window size and MTU size are only checked in the latest ACK packet and don't regress. Fixes: 248f219c ("rxrpc: Rewrite the data and ack handling code") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
[ Upstream commit c479d5f2 ] We should only call the function to end a call's Tx phase if we rotated the marked-last packet out of the transmission buffer. Make rxrpc_rotate_tx_window() return an indication of whether it just rotated the packet marked as the last out of the transmit buffer, carrying the information out of the locked section in that function. We can then check the return value instead of examining RXRPC_CALL_TX_LAST. Fixes: 70790dbe ("rxrpc: Pass the last Tx packet marker in the annotation buffer") Signed-off-by:
-
Sascha Hauer authored
[ Upstream commit eea96566 ] The maximum CPU frequency for the i.MX53 QSB is 1GHz, so disable the 1.2GHz OPP. This makes the board work again with configs that have cpufreq enabled like imx_v6_v7_defconfig on which the board stopped working with the addition of cpufreq-dt support. Fixes: 791f4166 ("ARM: dts: imx53: add cpufreq-dt support") Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Sandipan Das authored
[ Upstream commit aa90f9f9 ] Recently, the subtest numbering was changed to start from 1. While it is fine for displaying results, this should not be the case when the subtests are actually invoked. Typically, the subtests are stored in zero-indexed arrays and invoked based on the index passed to the main test function. Since the index now starts from 1, the second subtest in the array (index 1) gets invoked instead of the first (index 0). This applies to all of the following subtests but for the last one, the subtest always fails because it does not meet the boundary condition of the subtest index being lesser than the number of subtests. This can be observed on powerpc64 and x86_64 systems running Fedora 28 as shown below. Before: # perf test "builtin clang support" 55: builtin clang support : 55.1: builtin clang compile C source to IR : Ok 55.2: builtin clang compile C source to ELF object : FAILED! # perf test "LLVM search and compile" 38: LLVM search and compile : 38.1: Basic BPF llvm compile : Ok 38.2: kbuild searching : Ok 38.3: Compile source for BPF prologue generation : Ok 38.4: Compile source for BPF relocation : FAILED! # perf test "BPF filter" 40: BPF filter : 40.1: Basic BPF filtering : Ok 40.2: BPF pinning : Ok 40.3: BPF prologue generation : Ok 40.4: BPF relocation checker : FAILED! After: # perf test "builtin clang support" 55: builtin clang support : 55.1: builtin clang compile C source to IR : Ok 55.2: builtin clang compile C source to ELF object : Ok # perf test "LLVM search and compile" 38: LLVM search and compile : 38.1: Basic BPF llvm compile : Ok 38.2: kbuild searching : Ok 38.3: Compile source for BPF prologue generation : Ok 38.4: Compile source for BPF relocation : Ok # perf test "BPF filter" 40: BPF filter : 40.1: Basic BPF filtering : Ok 40.2: BPF pinning : Ok 40.3: BPF prologue generation : Ok 40.4: BPF relocation checker : Ok Signed-off-by:
Sandipan Das <sandipan@linux.ibm.com> Reported-by:
-
Mathias Nyman authored
[ Upstream commit 2278446e ] Hub driver will try to disable a USB3 device twice at logical disconnect, racing with xhci_free_dev() callback from the first port disable. This can be triggered with "udisksctl power-off --block-device <disk>" or by writing "1" to the "remove" sysfs file for a USB3 device in 4.17-rc4. USB3 devices don't have a similar disabled link state as USB2 devices, and use a U3 suspended link state instead. In this state the port is still enabled and connected. hub_port_connect() first disconnects the device, then later it notices that device is still enabled (due to U3 states) it will try to disable the port again (set to U3). The xhci_free_dev() called during device disable is async, so checking for existing xhci->devs[i] when setting link state to U3 the second time was successful, even if device was being freed. The regression was caused by, and whole thing revealed by, Commit 44a182b9 ("xhci: Fix use-after-free in xhci_free_virt_device") which sets xhci->devs[i]->udev to NULL before xhci_virt_dev() returned. and causes a NULL pointer dereference the second time we try to set U3. Fix this by checking xhci->devs[i]->udev exists before setting link state. The original patch went to stable so this fix needs to be applied there as well. Fixes: 44a182b9 ("xhci: Fix use-after-free in xhci_free_virt_device") Cc: <stable@vger.kernel.org> Reported-by:
Jordan Glover <Golden_Miller83@protonmail.ch> Tested-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Daniel Mack authored
[ Upstream commit 4f666675 ] When powering down a SDIO connected card during suspend, make sure to call into the generic lbs_suspend() function before pulling the plug. This will make sure the card is successfully deregistered from the system to avoid communication to the card starving out. Fixes: 7444a809 ("libertas: fix suspend and resume for SDIO connected cards") Signed-off-by:
Daniel Mack <daniel@zonque.org> Reviewed-by:
Ulf Hansson <ulf.hansson@linaro.org> Acked-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Christophe Jaillet authored
[ Upstream commit 3dc7c7ba ] Before returning -EPERM we should release some resources, as already done in the other error handling path of the function. Fixes: d8f9cc32 ("IB/mlx4: Mark user MR as writable if actual virtual memory is writable") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 571d0563 ] The first argument to WARN_ONCE() is a condition. Fixes: 5800dc5c ("x86/paravirt: Fix spectre-v2 mitigations for paravirt guests") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Juergen Gross <jgross@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alok Kataria <akataria@vmware.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: virtualization@lists.linux-foundation.org Cc: kernel-janitors@vger.kernel.org Link: https://lkml.kernel.org/r/20180919103553.GD9238@mwandaSigned-off-by:
-
Phil Reid authored
[ Upstream commit 92397a6c ] linux/iio/buffer-dma.h was not updated to when length was changed to unsigned int. Fixes: c043ec1c ("iio:buffer: make length types match kfifo types") Signed-off-by:
Phil Reid <preid@electromag.com.au> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Daniel Verkamp authored
[ Upstream commit c7399698 ] Commit 42de82a8 previously attempted to fix this, and it did correctly pad the MN and FR fields with spaces, but the SN field still contains 0 bytes. The current code fills out the first 16 bytes with hex2bin, leaving the last 4 bytes zeroed. Rather than adding a lot of error-prone math to avoid overwriting SN twice, just set the whole thing to spaces up front (it's only 20 bytes). Fixes: 42de82a8 ("nvmet: don't report 0-bytes in serial number") Signed-off-by:
Daniel Verkamp <daniel.verkamp@intel.com> Reviewed-by:
Martin Wilck <mwilck@suse.com> Signed-off-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Andreas Born authored
[ Upstream commit 11e9d782 ] bond_miimon_commit() handles the UP transition for each slave of a bond in the case of MII. It is triggered 10 times per second for the default MII Polling interval of 100ms. For device drivers that do not implement __ethtool_get_link_ksettings() the call to bond_update_speed_duplex() fails persistently while the MII status could remain UP. That is, in this and other cases where the speed/duplex update keeps failing over a longer period of time while the MII state is UP, a warning is printed every MII polling interval. To address these excessive warnings net_ratelimit() should be used. Printing a warning once would not be sufficient since the call to bond_update_speed_duplex() could recover to succeed and fail again later. In that case there would be no new indication what went wrong. Fixes: b5bf0f5b (bonding: correctly update link status during mii-commit phase) Signed-off-by:
Andreas Born <futur.andy@googlemail.com> Signed-off-by:
-
Govindarajulu Varadarajan authored
[ Upstream commit 56f77227 ] In failure path, we overwrite err to what vnic_rq_disable() returns. In case it returns 0, enic_open() returns success in case of error. Reported-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Fixes: e8588e26 ("enic: enable rq before updating rq descriptors") Signed-off-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
-
Ross Lagerwall authored
[ Upstream commit cb257783 ] Fixes: f599c64f ("xen-netfront: Fix race between device setup and open") Reported-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by:
-
David S. Miller authored
[ Upstream commit cfb61b5e ] pmdp_invalidate() was changed to update the pmd atomically (to not lose dirty/access bits) and return the original pmd value. However, in doing so, we lost a lot of the essential work that set_pmd_at() does, namely to update hugepage mapping counts and queuing up the batched TLB flush entry. Thus we were not flushing entries out of the TLB when making such PMD changes. Fix this by abstracting the accounting work of set_pmd_at() out into a separate function, and call it from pmdp_establish(). Fixes: a8e654f0 ("sparc64: update pmdp_invalidate() to return old pmd value") Signed-off-by:
-
Ross Lagerwall authored
[ Upstream commit 45c8184c ] Update the features after calling register_netdev() otherwise the device features are not set up correctly and it not possible to change the MTU of the device. After this change, the features reported by ethtool match the device's features before the commit which introduced the issue and it is possible to change the device's MTU. Fixes: f599c64f ("xen-netfront: Fix race between device setup and open") Reported-by:
Liam Shepherd <liam@dancer.es> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
[ Upstream commit 52fda36d ] Function bpf_fill_maxinsns11 is designed to not be able to be JITed on x86_64. So, it fails when CONFIG_BPF_JIT_ALWAYS_ON=y, and commit 09584b40 ("bpf: fix selftests/bpf test_kmod.sh failure when CONFIG_BPF_JIT_ALWAYS_ON=y") makes sure that failure is detected on that case. However, it does not fail on other architectures, which have a different JIT compiler design. So, test_bpf has started to fail to load on those. After this fix, test_bpf loads fine on both x86_64 and ppc64el. Fixes: 09584b40 ("bpf: fix selftests/bpf test_kmod.sh failure when CONFIG_BPF_JIT_ALWAYS_ON=y") Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Reviewed-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 6a30abaa ] The commit c469652b ("ALSA: hda - Use IS_REACHABLE() for dependency on input") simplified the dependencies with IS_REACHABLE() macro, but it broke due to its incorrect usage: it should have been IS_REACHABLE(CONFIG_INPUT) instead of IS_REACHABLE(INPUT). Fixes: c469652b ("ALSA: hda - Use IS_REACHABLE() for dependency on input") Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jiri Slaby authored
[ Upstream commit e78c38f6 ] In commit 30d6e0a4 ("futex: Remove duplicated code and fix undefined behaviour"), I let FUTEX_WAKE_OP to fail on invalid op. Namely when op should be considered as shift and the shift is out of range (< 0 or > 31). But strace's test suite does this madness: futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xa0caffee); futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xbadfaced); futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xffffffff); When I pick the first 0xa0caffee, it decodes as: 0x80000000 & 0xa0caffee: oparg is shift 0x70000000 & 0xa0caffee: op is FUTEX_OP_OR 0x0f000000 & 0xa0caffee: cmp is FUTEX_OP_CMP_EQ 0x00fff000 & 0xa0caffee: oparg is sign-extended 0xcaf = -849 0x00000fff & 0xa0caffee: cmparg is sign-extended 0xfee = -18 That means the op tries to do this: (futex |= (1 << (-849))) == -18 which is completely bogus. The new check of op in the code is: if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) { if (oparg < 0 || oparg > 31) return -EINVAL; oparg = 1 << oparg; } which results obviously in the "Invalid argument" errno: FAIL: futex =========== futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xa0caffee) = -1: Invalid argument futex.test: failed test: ../futex failed with code 1 So let us soften the failure to print only a (ratelimited) message, crop the value and continue as if it were right. When userspace keeps up, we can switch this to return -EINVAL again. [v2] Do not return 0 immediatelly, proceed with the cropped value. Fixes: 30d6e0a4 ("futex: Remove duplicated code and fix undefined behaviour") Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <dvhart@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 3995bbf5 ] On 32-bit (e.g. with m68k-linux-gnu-gcc-4.1): fs/cifs/inode.c: In function ‘simple_hashstr’: fs/cifs/inode.c:713: warning: integer constant is too large for ‘long’ type Fixes: 7ea884c7 ("smb3: Fix root directory when server returns inode number of zero") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit 2aeb1883 ] We're missing ctx lock when iterating children siblings within the perf_read path for group reading. Following race and crash can happen: User space doing read syscall on event group leader: T1: perf_read lock event->ctx->mutex perf_read_group lock leader->child_mutex __perf_read_group_add(child) list_for_each_entry(sub, &leader->sibling_list, group_entry) ----> sub might be invalid at this point, because it could get removed via perf_event_exit_task_context in T2 Child exiting and cleaning up its events: T2: perf_event_exit_task_context lock ctx->mutex list_for_each_entry_safe(child_event, next, &child_ctx->event_list,... perf_event_exit_event(child) lock ctx->lock perf_group_detach(child) unlock ctx->lock ----> child is removed from sibling_list without any sync with T1 path above ... free_event(child) Before the child is removed from the leader's child_list, (and thus is omitted from perf_read_group processing), we need to ensure that perf_read_group touches child's siblings under its ctx->lock. Peter further notes: | One additional note; this bug got exposed by commit: | | ba5213ae ("perf/core: Correct event creation with PERF_FORMAT_GROUP") | | which made it possible to actually trigger this code-path. Tested-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: ba5213ae ("perf/core: Correct event creation with PERF_FORMAT_GROUP") Link: http://lkml.kernel.org/r/20170720141455.2106-1-jolsa@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit 5aba2ba5 ] Fixes: cda7ea69 ("macsec: check return value of skb_to_sgvec always") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
James Chapman authored
[ Upstream commit 900631ee ] If L2TP_ATTR_OFFSET is set to a non-zero value in L2TPv3 tunnels, it results in L2TPv3 packets being transmitted which might not be compliant with the L2TPv3 RFC. This patch has l2tp ignore the offset setting and send all packets with no offset. In more detail: L2TPv2 supports a variable offset from the L2TPv2 header to the payload. The offset value is indicated by an optional field in the L2TP header. Our L2TP implementation already detects the presence of the optional offset and skips that many bytes when handling data received packets. All transmitted packets are always transmitted with no offset. L2TPv3 has no optional offset field in the L2TPv3 packet header. Instead, L2TPv3 defines optional fields in a "Layer-2 Specific Sublayer". At the time when the original L2TP code was written, there was talk at IETF of offset being implemented in a new Layer-2 Specific Sublayer. A L2TP_ATTR_OFFSET netlink attribute was added so that this offset could be configured and the intention was to allow it to be also used to set the tx offset for L2TPv2. However, no L2TPv3 offset was ever specified and the L2TP_ATTR_OFFSET parameter was forgotten about. Setting L2TP_ATTR_OFFSET results in L2TPv3 packets being transmitted with the specified number of bytes padding between L2TPv3 header and payload. This is not compliant with L2TPv3 RFC3931. This change removes the configurable offset altogether while retaining L2TP_ATTR_OFFSET for backwards compatibility. Any L2TP_ATTR_OFFSET value is ignored. Signed-off-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit f61dfff2 ] With gcc 4.1.2: drivers/iio/pressure/zpa2326.c: In function ‘zpa2326_wait_oneshot_completion’: drivers/iio/pressure/zpa2326.c:868: warning: ‘ret’ may be used uninitialized in this function When testing for "timeout < 0", timeout is already guaranteed to be strict negative, so the branch is always taken, and ret is thus always initialized. But (some version of) gcc is not smart enough to notice. Remove the check to fix this. As there is no other code in between assigning the error codes and returning them, the error codes can be returned immediately, and the intermediate variable can be dropped. Drop the "else" to please checkpatch. Fixes: e7215fe4 ("iio: pressure: zpa2326: report interrupted case as failure") Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 4d217a5a ] The newly added 'rodata_enabled' global variable is protected by the wrong #ifdef, leading to a link error when CONFIG_DEBUG_SET_MODULE_RONX is turned on: kernel/module.o: In function `disable_ro_nx': module.c:(.text.unlikely.disable_ro_nx+0x88): undefined reference to `rodata_enabled' kernel/module.o: In function `module_disable_ro': module.c:(.text.module_disable_ro+0x8c): undefined reference to `rodata_enabled' kernel/module.o: In function `module_enable_ro': module.c:(.text.module_enable_ro+0xb0): undefined reference to `rodata_enabled' CONFIG_SET_MODULE_RONX does not exist, so use the correct one instead. Fixes: 39290b38 ("module: extend 'rodata=off' boot cmdline parameter to module mappings") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Jessica Yu <jeyu@redhat.com> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit 3976626e ] Commit 62e3a3e3 changed get_pages() to initialise msm_gem_object::pages before trying to initialise msm_gem_object::sgt, so that put_pages() would properly clean up pages in the failure case. However, this means that put_pages() now needs to check that msm_gem_object::sgt is not null before trying to clean it up, and this check was only applied to part of the cleanup code. Move it all into the conditional block. (Strictly speaking we don't need to make the kfree() conditional, but since we can't avoid checking for null ourselves we may as well do so.) Fixes: 62e3a3e3 ("drm/msm: fix leak in failed get_pages") Signed-off-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Filipe Manana authored
[ Upstream commit 24e52b11 ] When doing an incremental send, while processing an extent that changed between the parent and send snapshots and that extent was an inline extent in the parent snapshot, it's possible to access a memory region beyond the end of leaf if the inline extent is very small and it is the first item in a leaf. An example scenario is described below. The send snapshot has the following leaf: leaf 33865728 items 33 free space 773 generation 46 owner 5 fs uuid ab7090d8-dafd-4fb9-9246-723b6d2e2fb7 chunk uuid 2d16478c-c704-4ab9-b574-68bff2281b1f (...) item 14 key (335 EXTENT_DATA 0) itemoff 3052 itemsize 53 generation 36 type 1 (regular) extent data disk byte 12791808 nr 4096 extent data offset 0 nr 4096 ram 4096 extent compression 0 (none) item 15 key (335 EXTENT_DATA 8192) itemoff 2999 itemsize 53 generation 36 type 1 (regular) extent data disk byte 138170368 nr 225280 extent data offset 0 nr 225280 ram 225280 extent compression 0 (none) (...) And the parent snapshot has the following leaf: leaf 31272960 items 17 free space 17 generation 31 owner 5 fs uuid ab7090d8-dafd-4fb9-9246-723b6d2e2fb7 chunk uuid 2d16478c-c704-4ab9-b574-68bff2281b1f item 0 key (335 EXTENT_DATA 0) itemoff 3951 itemsize 44 generation 31 type 0 (inline) inline extent data size 23 ram_bytes 613 compression 1 (zlib) (...) When computing the send stream, it is detected that the extent of inode 335, at file offset 0, and at fs/btrfs/send.c:is_extent_unchanged() we grab the leaf from the parent snapshot and access the inline extent item. However, before jumping to the 'out' label, we access the 'offset' and 'disk_bytenr' fields of the extent item, which should not be done for inline extents since the inlined data starts at the offset of the 'disk_bytenr' field and can be very small. For example accessing the 'offset' field of the file extent item results in the following trace: [ 599.705368] general protection fault: 0000 [#1] PREEMPT SMP [ 599.706296] Modules linked in: btrfs psmouse i2c_piix4 ppdev acpi_cpufreq serio_raw parport_pc i2c_core evdev tpm_tis tpm_tis_core sg pcspkr parport tpm button su$ [ 599.709340] CPU: 7 PID: 5283 Comm: btrfs Not tainted 4.10.0-rc8-btrfs-next-46+ #1 [ 599.709340] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014 [ 599.709340] task: ffff88023eedd040 task.stack: ffffc90006658000 [ 599.709340] RIP: 0010:read_extent_buffer+0xdb/0xf4 [btrfs] [ 599.709340] RSP: 0018:ffffc9000665ba00 EFLAGS: 00010286 [ 599.709340] RAX: db73880000000000 RBX: 0000000000000000 RCX: 0000000000000001 [ 599.709340] RDX: ffffc9000665ba60 RSI: db73880000000000 RDI: ffffc9000665ba5f [ 599.709340] RBP: ffffc9000665ba30 R08: 0000000000000001 R09: ffff88020dc5e098 [ 599.709340] R10: 0000000000001000 R11: 0000160000000000 R12: 6db6db6db6db6db7 [ 599.709340] R13: ffff880000000000 R14: 0000000000000000 R15: ffff88020dc5e088 [ 599.709340] FS: 00007f519555a8c0(0000) GS:ffff88023f3c0000(0000) knlGS:0000000000000000 [ 599.709340] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 599.709340] CR2: 00007f1411afd000 CR3: 0000000235f8e000 CR4: 00000000000006e0 [ 599.709340] Call Trace: [ 599.709340] btrfs_get_token_64+0x93/0xce [btrfs] [ 599.709340] ? printk+0x48/0x50 [ 599.709340] btrfs_get_64+0xb/0xd [btrfs] [ 599.709340] process_extent+0x3a1/0x1106 [btrfs] [ 599.709340] ? btree_read_extent_buffer_pages+0x5/0xef [btrfs] [ 599.709340] changed_cb+0xb03/0xb3d [btrfs] [ 599.709340] ? btrfs_get_token_32+0x7a/0xcc [btrfs] [ 599.709340] btrfs_compare_trees+0x432/0x53d [btrfs] [ 599.709340] ? process_extent+0x1106/0x1106 [btrfs] [ 599.709340] btrfs_ioctl_send+0x960/0xe26 [btrfs] [ 599.709340] btrfs_ioctl+0x181b/0x1fed [btrfs] [ 599.709340] ? trace_hardirqs_on_caller+0x150/0x1ac [ 599.709340] vfs_ioctl+0x21/0x38 [ 599.709340] ? vfs_ioctl+0x21/0x38 [ 599.709340] do_vfs_ioctl+0x611/0x645 [ 599.709340] ? rcu_read_unlock+0x5b/0x5d [ 599.709340] ? __fget+0x6d/0x79 [ 599.709340] SyS_ioctl+0x57/0x7b [ 599.709340] entry_SYSCALL_64_fastpath+0x18/0xad [ 599.709340] RIP: 0033:0x7f51945eec47 [ 599.709340] RSP: 002b:00007ffc21c13e98 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 599.709340] RAX: ffffffffffffffda RBX: ffffffff81096459 RCX: 00007f51945eec47 [ 599.709340] RDX: 00007ffc21c13f20 RSI: 0000000040489426 RDI: 0000000000000004 [ 599.709340] RBP: ffffc9000665bf98 R08: 00007f519450d700 R09: 00007f519450d700 [ 599.709340] R10: 00007f519450d9d0 R11: 0000000000000202 R12: 0000000000000046 [ 599.709340] R13: ffffc9000665bf78 R14: 0000000000000000 R15: 00007f5195574040 [ 599.709340] ? trace_hardirqs_off_caller+0x43/0xb1 [ 599.709340] Code: 29 f0 49 39 d8 4c 0f 47 c3 49 03 81 58 01 00 00 44 89 c1 4c 01 c2 4c 29 c3 48 c1 f8 03 49 0f af c4 48 c1 e0 0c 4c 01 e8 48 01 c6 <f3> a4 31 f6 4$ [ 599.709340] RIP: read_extent_buffer+0xdb/0xf4 [btrfs] RSP: ffffc9000665ba00 [ 599.762057] ---[ end trace fe00d7af61b9f49e ]--- This is because the 'offset' field starts at an offset of 37 bytes (offsetof(struct btrfs_file_extent_item, offset)), has a length of 8 bytes and therefore attemping to read it causes a 1 byte access beyond the end of the leaf, as the first item's content in a leaf is located at the tail of the leaf, the item size is 44 bytes and the offset of that field plus its length (37 + 8 = 45) goes beyond the item's size by 1 byte. So fix this by accessing the 'offset' and 'disk_bytenr' fields after jumping to the 'out' label if we are processing an inline extent. We move the reading operation of the 'disk_bytenr' field too because we have the same problem as for the 'offset' field explained above when the inline data is less then 8 bytes. The access to the 'generation' field is also moved but just for the sake of grouping access to all the fields. Fixes: e1cbfd7b ("Btrfs: send, fix file hole not being preserved due to inline extent") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Alex Estrin authored
[ Upstream commit 612601d0 ] commit 9a9b8112 will cause core to fail UD QP from being destroyed on ipoib unload, therefore cause resources leakage. On pkey change event above patch modifies mgid before calling underlying driver to detach it from QP. Drivers' detach_mcast() will fail to find modified mgid it was never given to attach in a first place. Core qp->usecnt will never go down, so ib_destroy_qp() will fail. IPoIB driver actually does take care of new broadcast mgid based on new pkey by destroying an old mcast object in ipoib_mcast_dev_flush()) .... if (priv->broadcast) { rb_erase(&priv->broadcast->rb_node, &priv->multicast_tree); list_add_tail(&priv->broadcast->list, &remove_list); priv->broadcast = NULL; } ... then in restarted ipoib_macst_join_task() creating a new broadcast mcast object, sending join request and on completion tells the driver to attach to reinitialized QP: ... if (!priv->broadcast) { ... broadcast = ipoib_mcast_alloc(dev, 0); ... memcpy(broadcast->mcmember.mgid.raw, priv->dev->broadcast + 4, sizeof (union ib_gid)); priv->broadcast = broadcast; ... Fixes: 9a9b8112 ("IB/ipoib: Update broadcast object if PKey value was changed in index 0") Cc: stable@vger.kernel.org Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Alex Estrin <alex.estrin@intel.com> Signed-off-by:
Feras Daoud <ferasda@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Anjali Singhai Jain authored
[ Upstream commit 09f79fd4 ] X722 devices use the AdminQ to access the NVM, and this requires taking the AdminQ lock. Because of this, we lock the AdminQ during i40e_read_nvm(), which is also called in places where the lock is already held, such as the firmware update path which wants to lock once and then unlock when finished after performing several tasks. Although this should have only affected X722 devices, commit 96a39aed ("i40e: Acquire NVM lock before reads on all devices", 2016-12-02) added locking for all NVM reads, regardless of device family. This resulted in us accidentally causing NVM acquire timeouts on all devices, causing failed firmware updates which left the eeprom in a corrupt state. Create unsafe non-locked variants of i40e_read_nvm_word and i40e_read_nvm_buffer, __i40e_read_nvm_word and __i40e_read_nvm_buffer respectively. These variants will not take the NVM lock and are expected to only be called in places where the NVM lock is already held if needed. Since the only caller of i40e_read_nvm_buffer() was in such a path, remove it entirely in favor of the unsafe version. If necessary we can always add it back in the future. Additionally, we now need to hold the NVM lock in i40e_validate_checksum because the call to i40e_calc_nvm_checksum now assumes that the NVM lock is held. We can further move the call to read I40E_SR_SW_CHECKSUM_WORD up a bit so that we do not need to acquire the NVM lock twice. This should resolve firmware updates and also fix potential raise that could have caused the driver to report an invalid NVM checksum upon driver load. Reported-by:
Stefan Assmann <sassmann@kpanic.de> Fixes: 96a39aed ("i40e: Acquire NVM lock before reads on all devices", 2016-12-02) Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Gabriel Krisman Bertazi authored
[ Upstream commit 4fa13dbe ] In the same spirit of the fix for QXL in commit 86107838 ("drm: qxl: Don't alloc fbdev if emulation is not supported"), prevent the Oops in the unbind path of Bochs if fbdev emulation is disabled. [ 112.176009] Oops: 0002 [#1] SMP [ 112.176009] Modules linked in: bochs_drm [ 112.176009] CPU: 0 PID: 3002 Comm: bash Not tainted 4.11.0-rc1+ #111 [ 112.176009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014 [ 112.176009] task: ffff8800743bbac0 task.stack: ffffc90000b5c000 [ 112.176009] RIP: 0010:mutex_lock+0x18/0x30 [ 112.176009] RSP: 0018:ffffc90000b5fc78 EFLAGS: 00010246 [ 112.176009] RAX: 0000000000000000 RBX: 0000000000000260 RCX: 0000000000000000 [ 112.176009] RDX: ffff8800743bbac0 RSI: ffff8800787176e0 RDI: 0000000000000260 [ 112.176009] RBP: ffffc90000b5fc80 R08: ffffffff00000000 R09: 00000000ffffffff [ 112.176009] R10: ffff88007b463650 R11: 0000000000000000 R12: 0000000000000260 [ 112.176009] R13: ffff8800787176e0 R14: ffffffffa0003068 R15: 0000000000000060 [ 112.176009] FS: 00007f20564c7b40(0000) GS:ffff88007ce00000(0000) knlGS:0000000000000000 [ 112.176009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 112.176009] CR2: 0000000000000260 CR3: 000000006b89c000 CR4: 00000000000006f0 [ 112.176009] Call Trace: [ 112.176009] drm_mode_object_unregister+0x1e/0x50 [ 112.176009] drm_framebuffer_unregister_private+0x15/0x20 [ 112.176009] bochs_fbdev_fini+0x57/0x70 [bochs_drm] [ 112.176009] bochs_unload+0x16/0x50 [bochs_drm] [ 112.176009] drm_dev_unregister+0x37/0xd0 [ 112.176009] drm_put_dev+0x31/0x60 [ 112.176009] bochs_pci_remove+0x10/0x20 [bochs_drm] [ 112.176009] pci_device_remove+0x34/0xb0 [ 112.176009] device_release_driver_internal+0x150/0x200 [ 112.176009] device_release_driver+0xd/0x10 [ 112.176009] unbind_store+0x108/0x150 [ 112.176009] drv_attr_store+0x20/0x30 [ 112.176009] sysfs_kf_write+0x32/0x40 [ 112.176009] kernfs_fop_write+0x10b/0x190 [ 112.176009] __vfs_write+0x23/0x120 [ 112.176009] ? security_file_permission+0x36/0xb0 [ 112.176009] ? rw_verify_area+0x49/0xb0 [ 112.176009] vfs_write+0xb0/0x190 [ 112.176009] SyS_write+0x41/0xa0 [ 112.176009] entry_SYSCALL_64_fastpath+0x1a/0xa9 [ 112.176009] RIP: 0033:0x7f2055bd5620 [ 112.176009] RSP: 002b:00007ffed2f487d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 112.176009] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f2055bd5620 [ 112.176009] RDX: 000000000000000d RSI: 0000000000ee0008 RDI: 0000000000000001 [ 112.176009] RBP: 0000000000000001 R08: 00007f2055e94760 R09: 00007f20564c7b40 [ 112.176009] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000000 [ 112.176009] R13: 00007ffed2f48d70 R14: 0000000000000000 R15: 0000000000000000 [ 112.176009] Code: 00 00 00 55 be 02 00 00 00 48 89 e5 e8 62 fb ff ff 5d c3 55 48 89 e5 53 48 89 fb e8 53 e9 ff ff 65 48 8b 14 25 40 c4 00 00 31 c0 <f0> 48 0f b1 13 48 85 c0 74 08 48 89 df e8c6 ff ff ff 5b 5d c3 [ 112.176009] RIP: mutex_lock+0x18/0x30 RSP: ffffc90000b5fc78 [ 112.176009] CR2: 0000000000000260 [ 112.205622] ---[ end trace 76189cd7a9bdd155 ]--- Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170317181409.4183-1-krisman@collabora.co.ukSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit 3a9910d7 ] qla2x00_tmf_sp_done() now deletes the timer that will run qla2x00_tmf_iocb_timeout(), but doesn't check whether the timer already expired. Check the return value from del_timer() to avoid calling complete() a second time. Fixes: 4440e46d ("[SCSI] qla2xxx: Add IOCB Abort command asynchronous ...") Fixes: 1514839b ("scsi: qla2xxx: Fix NULL pointer crash due to active ...") Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Noa Osherovich authored
[ Upstream commit e7b169f3 ] During QP creation, the mlx5 driver translates the QP type to an internal value which is passed on to FW. There was no check to make sure that the translated value is valid, and -EINVAL was coerced into the mailbox command. Current firmware refuses this as an invalid QP type, but future/past firmware may do something else. Fixes: 09a7d9ec ('{net,IB}/mlx5: QP/XRCD commands via mlx5 ifc') Reviewed-by:
Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by:
Noa Osherovich <noaos@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 1f704fd0 ] A semaphore is acquired before this check, so we must release it before leaving. Link: http://lkml.kernel.org/r/20171211211009.4971-1-christophe.jaillet@wanadoo.fr Fixes: b7f0554a ("mm: fail get_vaddr_frames() for filesystem-dax mappings") Signed-off-by:
Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Sterba <dsterba@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Josef Bacik authored
[ Upstream commit d61b7f97 ] A user noticed that write performance was horrible over loopback and we traced it to an inversion of when we need to set MSG_MORE. It should be set when we have more bvec's to send, not when we are on the last bvec. This patch made the test go from 20 iops to 78k iops. Signed-off-by:
Josef Bacik <jbacik@fb.com> Fixes: 429a787b ("nbd: fix use-after-free of rq/bio in the xmit path") Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
