- 28 Nov, 2018 15 commits
-
-
Ville Syrjälä authored
skl+ can go belly up if there are overlapping ddb allocations between planes. If we could absolutely guarantee that we can perform the atomic update within a single frame we shouldn't have to worry about this. But we can't rely on that so let's steal the ddb overlap check trick from skl_update_crtcs() and apply it to the plane updates. Since each step of the sequence is free from ddb overlaps we don't have to worry about a vblank sneaking up on us in the middle of the sequence. The partial state that gets latched by the hardware will be safe. And unlike skl_update_crtcs() we don't have to intoduce any extra vblank waits on account of only having to worry about a single pipe. v2: Fix typo in commit msg (Matt) Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181114210729.16185-12-ville.syrjala@linux.intel.comReviewed-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Ville Syrjälä authored
On SKL+ the plane WM/BUF_CFG registers are a proper part of each plane's register set. That means accessing them will cancel any pending plane update, and we would need a PLANE_SURF register write to arm the wm/ddb change as well. To avoid all the problems with that let's just move the wm/ddb programming into the plane update/disable hooks. Now all plane registers get written in one (hopefully atomic) operation. To make that feasible we'll move the plane ddb tracking into the crtc state. Watermarks were already tracked there. v2: Rebase due to input CSC v3: Split out a bunch of junk (Matt) v4: Add skl_wm_add_affected_planes() to deal with cursor special case and non-zero wm register reset value v5: Drop the unrelated for_each_intel_plane_mask() fix (Matt) Remove the redundant ddb memset() (Matt) Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #v3 Signed-off-by: -
Ville Syrjälä authored
Simplify the calling convention of the skl+ watermark functions by not passing around dev_priv needlessly. The callees have what they need to dig it out anyway. Signed-off-by:
-
Ville Syrjälä authored
Make a cleaner split between the skl+ and icl+ ways of computing watermarks. This way skl_build_pipe_wm() doesn't have to know any of the gritty details of icl+ master/slave planes. We can also simplify a bunch of the lower level code by pulling the plane visibility checks a bit higher up. v2: WARN_ON(!visible) for the icl+ master plane case (Matt) Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Ville Syrjälä authored
We have to pass both level 0 watermark struct and the transition watermark struct to skl_compute_transition_wm(). Make life less confusing by just passing the entire plane watermark struct that contains both aforementioned structures. Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Ville Syrjälä authored
We memset(0) the entire watermark struct the start, so there's no need to clear things later on. v2: Rebase due to some stale w/a removal Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Ville Syrjälä authored
If the level 0 latency is 0 we can't do anything. Return an error rather than success. While this can't happen due to WaWmMemoryReadLatency, it can happen if the user clears out the level 0 latency via debugfs. v2: Clarify how how we can end here with zero level 0 latency (Matt) Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Ville Syrjälä authored
We're going to need access to the new crtc state in ->disable_plane() for SKL+ wm/ddb programming and pre-skl pipe gamma/csc control. Pass the crtc state down. We'll also try to make intel_crtc_disable_planes() do the right thing as much as it's possible. The fact that we don't have a separate crtc state for the disabled state when we're going to re-enable the crtc later means we might end up poking at a few extra planes in there. But that's harmless. I suppose one might argue that we wouldn't have to care about proper ddb/wm/csc/gamma if the pipe is going to permanently disable anyway, but the state checker probably cares so we should try our best to make sure everything is programmed correctly even in that case. v2: Fix the commit message a bit (Matt) Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Keep track which planes need updating during the commit. For now we set the bit for any plane that was or will be visible (including icl+ nv12 slave planes). In the future I'll have need to update invisible planes as well, for skl plane ddbs and for pre-skl pipe gamma/csc control (which lives in the primary plane control register). v2: Pimp the commit message to mention icl+ nv12 slave planes (Matt) Reviewed-by:
-
Ville Syrjälä authored
The plane color correction registers are single buffered. So ideally we would write them at the start of vblank just after the double buffered plane registers have been latched. Since we have no convenient way to do that for now let's at least move the single buffered register writes to happen after the double buffered registers have been written. Reviewed-by:
-
Ville Syrjälä authored
Some observations about the plane registers: - the control register will self-arm if the plane is not already enabled, thus we want to write it as close to (or ideally after) the surface register - tileoff/linoff/offset/aux_offset are self-arming as well so we want them close to the surface register as well - color keying registers we maybe self arming before SKL. Not 100% sure but we can try to keep them near to the surface register as well - chv pipe b csc register are double buffered but self arming so moving them down a bit - the rest should be mostly armed by the surface register so we can safely write them first, and to just for some consistency let's try to follow keep them in order based on the register offset None of this will have any effect of course unless the vblank evasion fails (which it still does sometimes). Another potential future benefit might be pulling the non-self armings registers outside the vblank evasion since they won't latch until the arming register has been written. This would make the critical section a bit lighter and thus less likely to exceed the deadline. v2: Rebase due to input CSC v3: Swap LINOFF/TILEOFF and KEYMSK/KEYMAX to actually follow the last rule above (Matt) Add a bit more rationale to the commit message (Matt) Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: -
Chris Wilson authored
Mark A0 as the one and only pre-production variant of Kabylake and remove its couple of workarounds, consigning them to the annals of history. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Acked-by:
-
Manasi Navare authored
DSC specification defines linebuf_depth which contains the line buffer bit depth used to generate the bitstream. These values are defined as per Table 4.1 in DSC 1.2 spec v2 (From Manasi): * Rename as MAX_LINEBUF_DEPTH for DSC 1.1 and DSC 1.2 Cc: dri-devel@lists.freedesktop.org Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Gaurav K Singh <gaurav.k.singh@intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Acked-by: Sean Paul <seanpaul@chromium.org> (For merging through drm-intel) Reviewed-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181127214125.17658-6-manasi.d.navare@intel.com
-
Manasi Navare authored
According to Display Stream compression spec 1.2, the picture parameter set metadata is sent from source to sink device using the DP Secondary data packet. An infoframe is formed for the PPS SDP header and PPS SDP payload bytes. This patch adds helpers to fill the PPS SDP header and PPS SDP payload according to the DSC 1.2 specification. v7: * Use BUILD_BUG_ON() to protect changing struct size (Ville) * Remove typecaseting (Ville) * Include byteorder.h in drm_dsc.c (Ville) * Correct kernel doc spacing (Anusha) v6: * Use proper sequence points for breaking down the assignments (Chris Wilson) * Use SPDX identifier v5: Do not use bitfields for DRM structs (Jani N) v4: * Use DSC constants for params that dont change across configurations v3: * Add reference to added kernel-docs in Documentation/gpu/drm-kms-helpers.rst (Daniel Vetter) v2: * Add EXPORT_SYMBOL for the drm functions (Manasi) Cc: dri-devel@lists.freedesktop.org Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
-
Srivatsa, Anusha authored
DSC has some Rate Control values that remain constant across all configurations. These are as per the DSC standard. v3: * Define them in drm_dsc.h as they are DSC constants (Manasi) v2: * Add DP_DSC_ prefix (Jani Nikula) Cc: dri-devel@lists.freedesktop.org Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Gaurav K Singh <gaurav.k.singh@intel.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
- 27 Nov, 2018 4 commits
-
-
Manasi Navare authored
This defines all the DSC parameters as per the VESA DSC spec that will be required for DSC encoder/decoder v6: (From Manasi) * Add a bit mask for RANGE_BPG_OFFSET for 6 bits(Manasi) v5 (From Manasi) * Add the RC constants as per the spec v4 (From Manasi) * Add the DSC_MUX_WORD_SIZE constants (Manasi) v3 (From Manasi) * Remove the duplicate define (Suggested By:Harry Wentland) v2: Define this struct in DRM (From Manasi) * Changed the data types to u8/u16 instead of unsigned longs (Manasi) * Remove driver specific fields (Manasi) * Move this struct definition to DRM (Manasi) * Define DSC 1.2 parameters (Manasi) * Use DSC_NUM_BUF_RANGES (Manasi) * Call it drm_dsc_config (Manasi) Cc: dri-devel@lists.freedesktop.org Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Manasi Navare authored
This patch defines a new header file for all the DSC 1.2 structures and creates a structure for PPS infoframe which will be used to send picture parameter set secondary data packet for display stream compression. All the PPS infoframe syntax elements are taken from DSC 1.2 specification from VESA. v4: * Remove redundant blankline in doc (Ville) * use drm_dsc namespace for all structs (Ville) * Use packed struct (Ville) v3: * Add the SPDX shorthand (Chris Wilson) v2: * Do not use bitfields in the struct (Jani Nikula) Cc: Gaurav K Singh <gaurav.k.singh@intel.com> Cc: dri-devel@lists.freedesktop.org Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Manasi Navare authored
DSC DPCD color depth register advertises its color depth capabilities by setting each of the bits that corresponding to a specific color depth. This patch defines those specific color depths and adds a helper to return an array of color depth capabilities. v2: * Simplify the logic (Ville) Signed-off-by:
-
Chris Wilson authored
If the engine's seqno is already at our target seqno (most likely it hasn't been used since the last reset), we can skip serialising the engine and leave it as is. Signed-off-by:
-
- 26 Nov, 2018 1 commit
-
-
Chris Wilson authored
We may be simply restarting too fast for the culmudgeonly gen3/gen4 as we still see missing interrupts following a reset. So let's try restarting a little slower, first wake up the ring empty and then tell it about the work it has to perform. References: https://bugs.freedesktop.org/show_bug.cgi?id=108735Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181126122821.4537-1-chris@chris-wilson.co.uk
-
- 23 Nov, 2018 1 commit
-
-
Chris Wilson authored
Currently, we convert the error state into a string every time we read from sysfs (and sysfs reads in page size (4KiB) chunks). We do try to window the string and only capture the portion that is being read, but that means that we must always convert up to the window to find the start. For a very large error state bordering on EXEC_OBJECT_CAPTURE abuse, this is noticeable as it degrades to O(N^2)! As we do not have a convenient hook for sysfs open(), and we would like to keep the lazy conversion into a string, do the conversion of the whole string on the first read and keep the string until the error state is freed. v2: Don't double advance simple_read_from_buffer v3: Due to extreme pain of lack of vrealloc, use a scatterlist v4: Keep the forward iterator loosely cached v5: Stylistic improvements to reduce patch size Reported-by:
Jason Ekstrand <jason@jlekstrand.net> Testcase: igt/gem_exec_capture/many* Signed-off-by:
-
- 22 Nov, 2018 11 commits
-
-
José Roberto de Souza authored
We should not access hardware while computing config also we don't support stereo 3D so this test was never true. Suggested-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181121225441.18785-6-jose.souza@intel.com
-
José Roberto de Souza authored
If a PSR error happened and the driver is reloaded, the EDP_PSR_IIR will still keep the error set even after the reset done in the irq_preinstall and irq_uninstall hooks. And enabling in this situation cause the screen to freeze in the first time that PSR HW tries to activate so lets keep PSR disabled to avoid any rendering problems. v5: rebased: using edp_psr_shift() v4: Moved handling from intel_psr_compute_config() to intel_psr_init() to avoid hardware access during compute(Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
José Roberto de Souza authored
While PSR is active hardware will do aux transactions by it self to wakeup sink to receive a new frame when necessary. If that transaction is not acked by sink, hardware will trigger this interruption. So let's disable PSR as it is a hint that there is problem with this sink. The removed FIXME was asking to manually train the link but we don't need to do that as by spec sink should do a short pulse when it is out of sync with source, we just need to make sure it is awaken and the SDP header with PSR inactive set it will trigger the short pulse with a error set in the link status. v3: added workarround to fix scheduled work starvation cause by to frequent PSR error interruption v4: only setting irq_aux_error as we don't care in clear it and not using dev_priv->irq_lock as consequence. v5: rebased: using edp_psr_shift() Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
José Roberto de Souza authored
When we detect a error and disable PSR, it is kept disabled until the next modeset but as the sink already show signs that it do not properly work with PSR lets disabled it for good to avoid any additional flickering. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
José Roberto de Souza authored
When a PSR error happens sink sets the PSR error register and also set the link status to a error status. So in the short pulse handling it was returning earlier and doing a full detection and attempting to retrain but it fails as PSR HW is in change of the main-link. Just call intel_psr_short_pulse() before intel_dp_needs_link_retrain() is not the right fix as intel_dp_needs_link_retrain() would return true and trigger a full detection while PSR HW is still in change of main-link. Check for PSR active is also not safe as it could be inactive due a frontbuffer invalidate and still doing the PSR exit sequence. v3: added comment in intel_dp_needs_link_retrain() Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
José Roberto de Souza authored
Some eDP panels do not set a valid sink count value and even for the ones that sets is should always be one for eDP, that is why it is not cached in intel_edp_init_dpcd(). But intel_dp_short_pulse() compares the old count with the read one if there is a mistmatch a full port detection will be executed, what was happening in the first short pulse interruption of eDP panels that sets sink count. Instead of just skip the compasison for eDP panels, lets not read the sink count at all for eDP. v2: the previous version of this patch it was caching the sink count in intel_edp_init_dpcd() but I was pointed out by Ville a patch that handled a case of a eDP panel that do not set sink count and as sink count is not used to eDP certification was choosed to just not read it at all. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
Lyude Paul authored
While trying to add a chamelium test for short HPD IRQs, I ran into issues where a hotplug storm would be triggered, but the point at which it would be reported by the kernel would be after igt actually finished checking i915_hpd_storm_ctl's status. So, fix this by simply synchronizing our IRQ work, dig_port_work, and hotplug_work before printing out the HPD storm status in i915_hpd_storm_ctl_show(). Signed-off-by:
Lyude Paul <lyude@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181121003718.17704-1-lyude@redhat.com
-
Ville Syrjälä authored
Replace the messy framebuffer format/modifier validation code with a single call to drm_any_plane_has_format(). The code was extremely annoying to maintain as you had to have a lot of platform checks for different formats. The new code requires zero maintenance. v2: Nuke the modifier checks as well since the core does that too now v3: Call drm_any_plane_has_format() from the driver code v4: Rebase Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
-
Jani Nikula authored
Signed-off-by:Jani Nikula <jani.nikula@intel.com>
-
Jani Nikula authored
Signed-off-by: -
Hans Holmberg authored
There is no need to rebuild i915_gpu_error.o when the version string changes as the version is available in init_utsname()->release. Signed-off-by:
Hans Holmberg <hans.holmberg@cnexlabs.com> Reviewed-by:
-
- 21 Nov, 2018 8 commits
-
-
Chris Wilson authored
When showing the list of waiters, include the task's status so that we can tell if they have been woken up and are waiting for the CPU, or if they are still waiting to be woken. v2: task_state_to_char() Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181121151653.24595-1-chris@chris-wilson.co.uk
-
Ville Syrjälä authored
If we need to force a full plane update before userspace/fbdev have given us a proper plane state we should try to maintain the current plane state as much as possible (apart from the parts of the state we're trying to fix up with the plane update). To that end add basic readout for the plane rotation and maintain it during the initial fb takeover. Cc: Hans de Goede <hdegoede@redhat.com> Fixes: 516a49cc ("drm/i915: Fix assert_plane() warning on bootup with external display") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
-
Ville Syrjälä authored
If we force a plane update to fix up our half populated plane state we'll also force on the pipe gamma for the plane (since we always enable pipe gamma currently). If the BIOS hasn't programmed a sensible LUT into the hardware this will cause the image to become corrupted. Typical symptoms are a purple/yellow/etc. flash when the driver loads. To avoid this let's program something sensible into the LUT when we do the plane update. In the future I plan to add proper plane gamma enable readout so this is just a temporary measure. Cc: Hans de Goede <hdegoede@redhat.com> Fixes: 516a49cc ("drm/i915: Fix assert_plane() warning on bootup with external display") Signed-off-by:
-
Imre Deak authored
Depending on the transcoder enum values to translate from transcoder to the corresponding CHICKEN_TRANS register can easily break if we add a new transcoder. Add an explicit mapping instead, by using helpers to look up the register instance either by transcoder or port (since unconveniently the registers have both port and transcoder specific bits). While at it also check for the correctness of GEN, port, transcoder. I wasn't sure if psr2_enabled can only be set for GEN9+, but that seems to be the case indeed (see setting of sink_psr2_support in intel_psr_init_dpcd()). v2 (Ville): - Make gen9_chicken_trans_reg() internal to intel_psr.c. - s/trans/cpu_transcoder/ Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Imre Deak authored
Add a comment to the pipe and transcoder enum definitions about our assumption in the code about enum values for pipes and transcoders with a 1:1 transcoder -> pipe mapping. v2: - Clarify more what are the assumptions about the enum values. (Ville) v3: (Lucas) - s/->/ -> / so it looks less like pointer dereferencing. - Use pipe enums as initializers in the transcoder enum definition. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by:
-
Imre Deak authored
Depending on the transcoder enum values to translate from transcoder to EDP PSR flags can easily break if we add a new transcoder. So remove the dependency by using an explicit mapping. While at it also add a WARN for unexpected trancoders. v2: - Simplify things by defining flag shift values instead of indices. - s/trans/cpu_transcoder/ (Ville) v3: - Define flags to look like separate bits instead of the values of the same bitfield. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by:
-
Imre Deak authored
Depending on the transcoder enum values to translate from transcoder to pipe/transcoder register addresses can easily break if we add a new transcoder. So remove the dependency by using named initializers. Suggested-by:
-
Alexandre Belloni authored
Fix a spelling mistake in a comment. Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
