- 28 Apr, 2022 9 commits
-
-
Andy Shevchenko authored
Convert the module to be property provider agnostic and allow it to be used on non-OF platforms. While at it, reuse temporary device pointer in the same function. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220414131804.25227-1-andriy.shevchenko@linux.intel.comSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Puranjay Mohan authored
Use the generic fwnode_irq_get_byname() in place of of_irq_get_byname() to get the IRQ number from the interrupt pin. Signed-off-by:
Puranjay Mohan <puranjay12@gmail.com> Link: https://lore.kernel.org/r/20211109200840.135019-3-puranjay12@gmail.comSigned-off-by:
-
Lorenzo Bianconi authored
Add device bindings for asm330lhhx IMU sensor. Use lsm6dsr as fallback device for asm330lhhx since it implements all the features currently supported by asm330lhhx. Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/2e5304b7e11085d4e701b4b591fd79cc54f01301.1649100168.git.lorenzo@kernel.orgSigned-off-by:
-
Lorenzo Bianconi authored
Add support to STM ASM330LHHX (acc + gyro) automotive Mems sensor. The ASM330LHHX sensor can use LSM6DSR as fallback device since it implements all the ASM330LHHX features currently implemented in st_lsm6dsx. Datasheet: https://www.st.com/resource/en/datasheet/asm330lhhx.pdfSigned-off-by:
-
Nuno Sá authored
Add an entry for the ad3552r DAC driver. Signed-off-by:
Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220404085000.249423-3-nuno.sa@analog.comSigned-off-by:
-
Nuno Sá authored
As the maintainer email no longer exists, change it to myself. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220404085000.249423-2-nuno.sa@analog.comSigned-off-by:
-
Maíra Canal authored
Convert probe functions to device-managed variants, with exception of the regulator, which required a devm_add_action_or_reset() hook registration. Reviewed-by:
Marcelo Schmitt <marcelo.schmitt1@gmail.com> Reviewed-by:
Maíra Canal <maira.canal@usp.br> Link: https://lore.kernel.org/r/20220407115621.10781-1-maira.canal@usp.brSigned-off-by:
-
Lars-Peter Clausen authored
strtobool() is deprecated and just a wrapper around kstrtobool().Replace it with kstrtobool() so the deprecated function can be removed eventually. Suggested-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Reviewed-by:
-
Miquel Raynal authored
As part of a previous discussion with Jonathan Cameron [1], it appeared necessary to clarify the meaning of each mode so that new developers could understand better what they should use or not use and when. The idea of renaming these modes as been let aside because naming is a big deal and requires a lot of thinking. So for now let's focus on correctly explaining what each mode implies. [1] https://lore.kernel.org/linux-iio/20210930165510.2295e6c4@jic23-huawei/Suggested-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220207143840.707510-14-miquel.raynal@bootlin.comSigned-off-by:
-
- 10 Apr, 2022 12 commits
-
-
Miquel Raynal authored
Among all the users of the kfifo buffers, no one uses the INDIO_BUFFER_HARDWARE mode. So let's take this as a general rule and simplify a little bit the internals - overall the documentation - by eliminating unused specific cases. Use the INDIO_BUFFER_SOFTWARE mode by default with kfifo buffers, which will basically mimic what all the "non direct" modes do. Cc: Benson Leung <bleung@chromium.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Jyoti Bhayana <jbhayana@google.com> Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Miquel Raynal authored
This entry should, under no situation, be modified by device drivers. Now that we have limited its read access to device drivers really needing it and did so through a dedicated helper, we can easily move this variable to the opaque structure in order to prevent any further modification from non-authorized code (out of the core, basically). Signed-off-by:
Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/20220207143840.707510-12-miquel.raynal@bootlin.comSigned-off-by:
-
Miquel Raynal authored
In order to later move this variable within the opaque structure, let's create a helper for accessing it in read-only mode. This helper will be exposed to device drivers and kept accessible for the few that could need it. The write access to this variable however should be fully reserved to the core so in a second step we will hide this variable into the opaque structure. Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
-
Miquel Raynal authored
As we are going to hide the currentmode inside the opaque structure, this helper would soon need to call a non-inline function which would simply drop the benefit of having the helper defined inline in a header. One alternative is to move this helper in the core as there is no more interest in defining it inline in a header. We will pay the minor cost either way. Let's do like the iio_device_id() helper which also refers to the opaque structure and gets defined in the core. Suggested-by:
-
Miquel Raynal authored
The st_sensors_core driver hardcodes the content of the iio_device_claim_direct_mode() and iio_device_release_direct_mode() helpers. Let's get rid of this handcrafted implementation and use the proper core helpers instead. Additionally, this lowers the tab level (which is always good) and prevents the use of the ->currentmode variable which is not supposed to be used like this anyway. Cc: Denis Ciocca <denis.ciocca@st.com> Signed-off-by:
-
Miquel Raynal authored
An odr_lock has been introduced to protect local accesses to the odr internal cache and ensure the cached value always reflected the actual value. Using the mlock() for this purpose is no longer needed, so let's drop these extra mutex_lock/unlock() calls. Suggested-by:
-
Miquel Raynal authored
Right now the (framework) mlock lock is (ab)used for multiple purposes: 1- protecting concurrent accesses over the odr local cache 2- avoid changing samplig frequency whilst buffer is running Let's start by handling situation #1 with a local lock. Suggested-by:
-
Miquel Raynal authored
The use of a lock there seems pointless. Besides preventing to read these information from userspace while buffers are enabled (which is not supposed to happen), it only protect read accesses over static const values, which are never supposed to be written anyway. Drop these lock calls. Suggested-by:
-
Miquel Raynal authored
As there is no cleanup to do, let's return as early as possible in the various ST sensor drivers _write_raw() callback functions. There is no functional change. Suggested-by:
-
Miquel Raynal authored
This is an internal variable of the core, let's use the iio_buffer_enabled() helper which is exported for the following purpose: telling if the current mode is a buffered mode, which is precisely what this driver looks for. Cc: Olivier Moysan <olivier.moysan@foss.st.com> Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220207143840.707510-4-miquel.raynal@bootlin.comSigned-off-by:
-
Miquel Raynal authored
This is an internal variable for the core, here it is set to a "default" value by the driver in order to later be able to perform checks against it. None of this is needed because this check actually cares about the buffers being enabled or not. So it is an unproper side-channel access to the information "are the buffers enabled?", returned officially by the iio_buffer_enabled() helper. Use this helper instead. Cc: Song Qiang <songqiang1304521@gmail.com> Signed-off-by:
-
Miquel Raynal authored
Let's provide more details about these two variables because their understanding may not be straightforward for someone not used to the IIO subsystem internal logic. The different modes will soon be also be more documented for the same reason. Signed-off-by:
-
- 04 Apr, 2022 19 commits
-
-
Marek Vasut authored
Replace sysfs attributes with read_avail() callback. This also permits removal of ads1115_info, since the scale attribute tables are now part of chip data. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by:
Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20220328194725.149150-10-marex@denx.deSigned-off-by:
-
Marek Vasut authored
Instead of storing only data_rate in private data, store pointer to the whole chip data and use the data_rate from chip data throughout the driver. No functional change. This is done in preparation for switching to read_avail(). Signed-off-by:
-
Marek Vasut authored
Replace chip type enumeration in match data with pointer to static constant structure which contains all the different chip properties in one place, and then replace handling of chip type in probe() with simple copy of fields in the new match data structure into struct iio_dev. This reduces code and increases static data. Signed-off-by:
-
Marek Vasut authored
Add compile-time static_assert wrapper to verify that shifted realbits fit into storagebits. The macro is implemented in a more generic way so it can be used to verify other values if required. Signed-off-by:
-
Marek Vasut authored
Add support for TI TLA2024 ADC. This chip is compatible with ADS1015 except it has no comparator in it, hence the comparator configuration bits are missing in Configuration Register and the Hi_Thresh/Lo_Thresh registers are missing as well and so is event support. Signed-off-by:
-
Marek Vasut authored
Pass event_spec and num_event_specs to ADS1015_V_CHAN and ADS1015_V_DIFF_CHAN macros, to make it possible to pass no event_spec at all for chips which have no comparator and thus no events. No functional change. Signed-off-by:
-
Marek Vasut authored
These macros differ only in the number of valid bits of each ADC sample and the shift of those bits, i.e. ADS1015 is 12bit ADC shifted by 4 left, ADS1115 is 16bit ADC shifted by 0. No functional change. Signed-off-by:
-
Marek Vasut authored
Switch the driver from code implementing test whether a regmap register is writeable to static const tables describing the test. No functional change. Signed-off-by:
-
Marek Vasut authored
Add ti,tla2024 compatible string. This device is compatible with ADS1015 except it has no on-chip comparator. Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
-
Marek Vasut authored
Add missing ti,ads1115 compatible string. This compatible string is supported by the Linux kernel driver and the ads1015 is a 12bit ADC while ads1115 is 16bit ADC. Add the missing compatible string. Acked-by:
-
Marek Vasut authored
Add runtime check to verify whether storagebits are at least as big as shifted realbits. This should help spot broken drivers which may set realbits + shift above storagebits. Signed-off-by:
-
Paul Lemmermann authored
Changed the leading spaces to tabs, in accordance with kernel coding conventions, and removed trailing comma. Found with checkpatch. Signed-off-by:
Paul Lemmermann <thepaulodoom@thepaulodoom.com> Link: https://lore.kernel.org/r/YkInN6SL7pP2f5Sf@hp-amd-paulSigned-off-by:
-
Paul Lemmermann authored
Cleaning up code. Found with checkpatch. Signed-off-by:
-
Jakob Koschel authored
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean [1]. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by:
Jakob Koschel <jakobkoschel@gmail.com> Reviewed-by:
-
Jakob Koschel authored
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean [1]. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by:
-
Jakob Koschel authored
In preparation to limit the scope of the list iterator variable to the list traversal loop, use a dedicated pointer to iterate through the list [1]. Since that variable should not be used past the loop iteration, a separate variable is used to 'remember the current location within the loop'. To either continue iterating from that position or start a new iteration (if the previous iteration was complete) list_prepare_entry() is used. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by:
-
H. Nikolaus Schaller authored
Although technically checking for ADC values below 0 is correct, because they are outside of the calibration values, there is usually noise which spuriously fills the console log with error messages if calculated input voltage gets close to 0V. Ignore small negative calculated values, but clamp them to 0. Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Link: https://lore.kernel.org/r/1cee45bfc3fa2ab59dcc17242fb52468035360a1.1646743982.git.hns@goldelico.comSigned-off-by:
-
Alexandru Tachici authored
Add sequencer support for AD7192. Signed-off-by:
Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20220322105029.86389-7-alexandru.tachici@analog.comSigned-off-by:
-
Alexandru Tachici authored
Add sequencer support for AD7124. Signed-off-by:
-
