Pull power management fixes from Rafael Wysocki:
 "These fix problems related to frequency limits management in cpufreq
  that were introduced during the 5.3 cycle (when PM QoS had started to
  be used for that), fix a few issues in the OPP (operating performance
  points) library code and fix up the recently added haltpoll cpuidle
  driver.

  The cpufreq changes are somewhat bigger that I would like them to be
  at this stage of the cycle, but the problems fixed by them include
  crashes on boot and shutdown in some cases (among other things) and in
  my view it is better to address the root of the issue right away.

  Specifics:

   - Using device PM QoS of CPU devices for managing frequency limits in
     cpufreq does not work, so introduce frequency QoS (based on the
     original low-level PM QoS) for this purpose, switch cpufreq and
     related code over to using it and fix a race involving deferred
     updates of frequency limits on top of that (Rafael Wysocki, Sudeep
     Holla).

   - Avoid calling regulator_enable()/disable() from the OPP framework
     to avoid side-effects on boot-enabled regulators that may change
     their initial voltage due to performing initial voltage balancing
     without all restrictions from the consumers (Marek Szyprowski).

   - Avoid a kref management issue in the OPP library code and drop an
     incorrectly added lockdep_assert_held() from it (Viresh Kumar).

   - Make the recently added haltpoll cpuidle driver take the 'idle='
     override into account as appropriate (Zhenzhong Duan)"

* tag 'pm-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  opp: Reinitialize the list_kref before adding the static OPPs again
  cpufreq: Cancel policy update work scheduled before freeing
  cpuidle: haltpoll: Take 'idle=' override into account
  opp: core: Revert "add regulators enable and disable"
  PM: QoS: Drop frequency QoS types from device PM QoS
  cpufreq: Use per-policy frequency QoS
  PM: QoS: Introduce frequency QoS
  opp: of: drop incorrect lockdep_assert_held()

Pull gfs2 fix from Andreas Gruenbacher:
 "Fix a memory leak introduced in -rc1"

* tag 'gfs2-v5.4-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Fix memory leak when gfs2meta's fs_context is freed

gfs2 and gfs2meta share an ->init_fs_context function which allocates an
args structure stored in fc->fs_private. gfs2 registers a ->free
function to free this memory when the fs_context is cleaned up, but
there was not one registered for gfs2meta, causing a leak.

Register a ->free function for gfs2meta. The existing gfs2_fc_free
function does what we need.

Reported-by: syzbot+c2fdfd2b783754878fb6@syzkaller.appspotmail.com
Fixes: 1f52aa08 ("gfs2: Convert gfs2 to fs_context")
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

* pm-cpuidle:
  cpuidle: haltpoll: Take 'idle=' override into account

* pm-opp:
  opp: Reinitialize the list_kref before adding the static OPPs again
  opp: core: Revert "add regulators enable and disable"
  opp: of: drop incorrect lockdep_assert_held()

Pull MFD fix from Lee Jones:
 "Fix broken support for BananaPi-r2"

* tag 'mfd-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: mt6397: Fix probe after changing mt6397-core

Pull sound fixes from Takashi Iwai:
 "This is a usual small bump in the middle, we've got a set of ASoC
  fixes in this week as shown in diffstat.

  The only change in the core stuff is about (somewhat minor) PCM
  debugfs error handling. The major changes are rather for Intel SOF and
  topology coverage, as well as other platform (rockchip, samsung, stm)
  and codec fixes.

  As non-ASoC changes, a couple of new HD-audio chip fixes and a typo
  correction of USB-audio driver validation code are found"

* tag 'sound-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits)
  ALSA: hda: Add Tigerlake/Jasperlake PCI ID
  ALSA: usb-audio: Fix copy&paste error in the validator
  ALSA: hda/realtek - Add support for ALC711
  ASoC: SOF: control: return true when kcontrol values change
  ASoC: stm32: sai: fix sysclk management on shutdown
  ASoC: Intel: sof-rt5682: add a check for devm_clk_get
  ASoC: rsnd: Reinitialize bit clock inversion flag for every format setting
  ASoC: simple_card_utils.h: Fix potential multiple redefinition error
  ASoC: msm8916-wcd-digital: add missing MIX2 path for RX1/2
  ASoC: core: Fix pcm code debugfs error
  ASoc: rockchip: i2s: Fix RPM imbalance
  ASoC: wm_adsp: Don't generate kcontrols without READ flags
  ASoC: intel: bytcr_rt5651: add null check to support_button_press
  ASoC: intel: sof_rt5682: add remove function to disable jack
  ASoC: rt5682: add NULL handler to set_jack function
  ASoC: intel: sof_rt5682: use separate route map for dmic
  ASoC: SOF: Intel: hda: Disable DMI L1 entry during capture
  ASoC: SOF: Intel: initialise and verify FW crash dump data.
  ASoC: SOF: Intel: hda: fix warnings during FW load
  ASoC: SOF: pcm: harden PCM STOP sequence
  ...

Part 3 from this series [1] was not merged due to wrong splitting
and breaks mt6323 pmic on bananapi-r2

dmesg prints this line and at least switch is not initialized on bananapi-r2

mt6397 1000d000.pwrap:mt6323: unsupported chip: 0x0

this patch contains only the probe-changes and chip_data structs
from original part 3 by Hsin-Hsiung Wang

[1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=164155

Fixes: a4872e80 ("mfd: mt6397: Extract IRQ related code from core driver")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Pull tracing fixes from Steven Rostedt:
 "Two minor fixes:

   - A race in perf trace initialization (missing mutexes)

   - Minor fix to represent gfp_t in synthetic events as properly
     signed"

* tag 'trace-v5.4-rc3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix race in perf_trace_buf initialization
  tracing: Fix "gfp_t" format for synthetic events

Pull VFIO fixlet from Alex Williamson:
 "Fix (false) uninitialized variable warning (Joerg Roedel)"

* tag 'vfio-v5.4-rc5' of git://github.com/awilliam/linux-vfio:
  vfio/type1: Initialize resv_msi_base

Merge tag 'regulator-fix-v5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "There are a few core fixes here around error handling and handling if
  suspend mode configuration and some driver specific fixes here but the
  most important change is the fix to the fixed-regulator DT schema
  conversion introduced during the last merge window.

  That fixes one of the last two errors preventing successful execution
  of "make dt_binding_check" which will be enormously helpful for DT
  schema development"

* tag 'regulator-fix-v5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: qcom-rpmh: Fix PMIC5 BoB min voltage
  regulator: pfuze100-regulator: Variable "val" in pfuze100_regulator_probe() could be uninitialized
  regulator: lochnagar: Add on_off_delay for VDDCORE
  regulator: ti-abb: Fix timeout in ti_abb_wait_txdone/ti_abb_clear_all_txdone
  regulator: da9062: fix suspend_enable/disable preparation
  dt-bindings: fixed-regulator: fix compatible enum
  regulator: fixed: Prevent NULL pointer dereference when !CONFIG_OF
  regulator: core: make regulator_register() EPROBE_DEFER aware
  regulator: of: fix suspend-min/max-voltage parsing

:Pull ARM fixes from Russell King:

 - fix for alignment faults under high memory pressure

 - use u32 for ARM instructions in fault handler

 - mark functions that must always be inlined with __always_inline

 - fix for nommu XIP

 - fix ARMv7M switch to handler mode in reboot path

 - fix the recently introduced AMBA reset control error paths

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8926/1: v7m: remove register save to stack before svc
  ARM: 8914/1: NOMMU: Fix exc_ret for XIP
  ARM: 8908/1: add __always_inline to functions called from __get_user_check()
  ARM: mm: alignment: use "u32" for 32-bit instructions
  ARM: mm: fix alignment handler faults under memory pressure
  drivers/amba: fix reset control error handling

Pull EDAC fix from Borislav Petkov:
 "Fix ghes_edac UAF case triggered by KASAN and DEBUG_TEST_DRIVER_REMOVE.

  Future pending rework of the ghes_edac instances registration will do
  away with the single memory controller per system model and that ugly
  hackery there.

  This is a minimal fix for stable@, courtesy of James Morse"

* tag 'edac_urgent_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/ghes: Fix Use after free in ghes_edac remove path

Pull btrfs fixes from David Sterba:

 - fixes of error handling cleanup of metadata accounting with qgroups
   enabled

 - fix swapped values for qgroup tracepoints

 - fix race when handling full sync flag

 - don't start unused worker thread, functionality removed already

* tag 'for-5.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: check for the full sync flag while holding the inode lock during fsync
  Btrfs: fix qgroup double free after failure to reserve metadata for delalloc
  btrfs: tracepoints: Fix bad entry members of qgroup events
  btrfs: tracepoints: Fix wrong parameter order for qgroup events
  btrfs: qgroup: Always free PREALLOC META reserve in btrfs_delalloc_release_extents()
  btrfs: don't needlessly create extent-refs kernel thread
  btrfs: block-group: Fix a memory leak due to missing btrfs_put_block_group()
  Btrfs: add missing extents release on file extent cluster relocation error

Pull operating performance points (OPP) framework fixes for v5.4
from Viresh Kumar:

"This contains:

- Patch to revert addition of regulator enable/disable in OPP core
  (Marek).
- Remove incorrect lockdep assert (Viresh).
- Fix a kref counting issue (Viresh)."

* 'opp/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  opp: Reinitialize the list_kref before adding the static OPPs again
  opp: core: Revert "add regulators enable and disable"
  opp: of: drop incorrect lockdep_assert_held()

The list_kref reaches a count of 0 when all the static OPPs are removed,
for example when dev_pm_opp_of_cpumask_remove_table() is called, though
the actual OPP table may not get freed as it may still be referenced by
other parts of the kernel, like from a call to
dev_pm_opp_set_supported_hw(). And if we call
dev_pm_opp_of_cpumask_add_table() again at this point, we must
reinitialize the list_kref otherwise the kernel will hit a WARN() in
kref infrastructure for incrementing a kref with value 0.

Fixes: 11e1a164 ("opp: Don't decrement uninitialized list_kref")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Add HD Audio Device PCI ID for the Intel Tigerlake and Jasperlake
platform.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022194402.23178-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Scheduled policy update work may end up racing with the freeing of the
policy and unregistering the driver.

One possible race is as below, where the cpufreq_driver is unregistered,
but the scheduled work gets executed at later stage when, cpufreq_driver
is NULL (i.e. after freeing the policy and driver).

Unable to handle kernel NULL pointer dereference at virtual address 0000001c
pgd = (ptrval)
[0000001c] *pgd=80000080204003, *pmd=00000000
Internal error: Oops: 206 [#1] SMP THUMB2
Modules linked in:
CPU: 0 PID: 34 Comm: kworker/0:1 Not tainted 5.4.0-rc3-00006-g67f5a8081a4b #86
Hardware name: ARM-Versatile Express
Workqueue: events handle_update
PC is at cpufreq_set_policy+0x58/0x228
LR is at dev_pm_qos_read_value+0x77/0xac
Control: 70c5387d  Table: 80203000  DAC: fffffffd
Process kworker/0:1 (pid: 34, stack limit = 0x(ptrval))
	(cpufreq_set_policy) from (refresh_frequency_limits.part.24+0x37/0x48)
	(refresh_frequency_limits.part.24) from (handle_update+0x2f/0x38)
	(handle_update) from (process_one_work+0x16d/0x3cc)
	(process_one_work) from (worker_thread+0xff/0x414)
	(worker_thread) from (kthread+0xff/0x100)
	(kthread) from (ret_from_fork+0x11/0x28)

Fixes: 67d874c3 ("cpufreq: Register notifiers with the PM QoS framework")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
[ rjw: Cancel the work before dropping the QoS requests ]
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The recently introduced USB-audio descriptor validator had a stupid
copy&paste error that may lead to an unexpected overlook of too short
descriptors for processing and extension units.  It's likely the cause
of the report triggered by syzkaller fuzzer.  Let's fix it.

Fixes: 57f87706 ("ALSA: usb-audio: More validations of descriptor units")
Reported-by: syzbot+0620f79a1978b1133fd7@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/s5hsgnkdbsl.wl-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Pull pin control fixes from Linus Walleij:
 "Here is a bunch of pin control fixes. I was lagging behind on this
  one, some fixes should have come in earlier, sorry about that.

  Anyways here it is, pretty straight-forward fixes, the Strago fix
  stand out as something serious affecting a lot of machines.

  Summary:
   - Handle multiple instances of Intel chips without complaining.
   - Restore the Intel Strago DMI workaround
   - Make the Armada 37xx handle pins over 32
   - Fix the polarity of the LED group on Armada 37xx
   - Fix an off-by-one bug in the NS2 driver
   - Fix error path for iproc's platform_get_irq()
   - Fix error path on the STMFX driver
   - Fix a typo in the Berlin AS370 driver
   - Fix up misc errors in the Aspeed 2600 BMC support
   - Fix a stray SPDX tag"

* tag 'pinctrl-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: aspeed-g6: Rename SD3 to EMMC and rework pin groups
  pinctrl: aspeed-g6: Fix UART13 group pinmux
  pinctrl: aspeed-g6: Make SIG_DESC_CLEAR() behave intuitively
  pinctrl: aspeed-g6: Fix I3C3/I3C4 pinmux configuration
  pinctrl: aspeed-g6: Fix I2C14 SDA description
  pinctrl: aspeed-g6: Sort pins for sanity
  dt-bindings: pinctrl: aspeed-g6: Rework SD3 function and groups
  pinctrl: berlin: as370: fix a typo s/spififib/spdifib
  pinctrl: armada-37xx: swap polarity on LED group
  pinctrl: stmfx: fix null pointer on remove
  pinctrl: iproc: allow for error from platform_get_irq()
  pinctrl: ns2: Fix off by one bugs in ns2_pinmux_enable()
  pinctrl: bcm-iproc: Use SPDX header
  pinctrl: armada-37xx: fix control of pins 32 and up
  pinctrl: cherryview: restore Strago DMI workaround for all versions
  pinctrl: intel: Allocate IRQ chip dynamic

Currenly haltpoll isn't aware of the 'idle=' override, the priority is
'idle=poll' > haltpoll > 'idle=halt'. When 'idle=poll' is used, cpuidle
driver is bypassed but current_driver in sys still shows 'haltpoll'.

When 'idle=halt' is used, haltpoll takes precedence and makes
'idle=halt' have no effect.

Add a check to prevent the haltpoll driver from loading if 'idle=' is
present.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Co-developed-by: Joao Martins <joao.m.martins@oracle.com>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

A race condition exists while initialiazing perf_trace_buf from
perf_trace_init() and perf_kprobe_init().

      CPU0                                        CPU1
perf_trace_init()
  mutex_lock(&event_mutex)
    perf_trace_event_init()
      perf_trace_event_reg()
        total_ref_count == 0
	buf = alloc_percpu()
        perf_trace_buf[i] = buf
        tp_event->class->reg() //fails       perf_kprobe_init()
	goto fail                              perf_trace_event_init()
                                                 perf_trace_event_reg()
        fail:
	  total_ref_count == 0

                                                   total_ref_count == 0
                                                   buf = alloc_percpu()
                                                   perf_trace_buf[i] = buf
                                                   tp_event->class->reg()
                                                   total_ref_count++

          free_percpu(perf_trace_buf[i])
          perf_trace_buf[i] = NULL

Any subsequent call to perf_trace_event_reg() will observe total_ref_count > 0,
causing the perf_trace_buf to be always NULL. This can result in perf_trace_buf
getting accessed from perf_trace_buf_alloc() without being initialized. Acquiring
event_mutex in perf_kprobe_init() before calling perf_trace_event_init() should
fix this race.

The race caused the following bug:

 Unable to handle kernel paging request at virtual address 0000003106f2003c
 Mem abort info:
   ESR = 0x96000045
   Exception class = DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
 Data abort info:
   ISV = 0, ISS = 0x00000045
   CM = 0, WnR = 1
 user pgtable: 4k pages, 39-bit VAs, pgdp = ffffffc034b9b000
 [0000003106f2003c] pgd=0000000000000000, pud=0000000000000000
 Internal error: Oops: 96000045 [#1] PREEMPT SMP
 Process syz-executor (pid: 18393, stack limit = 0xffffffc093190000)
 pstate: 80400005 (Nzcv daif +PAN -UAO)
 pc : __memset+0x20/0x1ac
 lr : memset+0x3c/0x50
 sp : ffffffc09319fc50

  __memset+0x20/0x1ac
  perf_trace_buf_alloc+0x140/0x1a0
  perf_trace_sys_enter+0x158/0x310
  syscall_trace_enter+0x348/0x7c0
  el0_svc_common+0x11c/0x368
  el0_svc_handler+0x12c/0x198
  el0_svc+0x8/0xc

Ramdumps showed the following:
  total_ref_count = 3
  perf_trace_buf = (
      0x0 -> NULL,
      0x0 -> NULL,
      0x0 -> NULL,
      0x0 -> NULL)

Link: http://lkml.kernel.org/r/1571120245-4186-1-git-send-email-prsood@codeaurora.org

Cc: stable@vger.kernel.org
Fixes: e12f03d7 ("perf/core: Implement the 'perf_kprobe' PMU")
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Prateek Sood <prsood@codeaurora.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

r0-r3 & r12 registers are saved & restored, before & after svc
respectively. Intention was to preserve those registers across thread to
handler mode switch.

On v7-M, hardware saves the register context upon exception in AAPCS
complaint way. Restoring r0-r3 & r12 is done from stack location where
hardware saves it, not from the location on stack where these registers
were saved.

To clarify, on stm32f429 discovery board:

1. before svc, sp - 0x90009ff8
2. r0-r3,r12 saved to 0x90009ff8 - 0x9000a00b
3. upon svc, h/w decrements sp by 32 & pushes registers onto stack
4. after svc,  sp - 0x90009fd8
5. r0-r3,r12 restored from 0x90009fd8 - 0x90009feb

Above means r0-r3,r12 is not restored from the location where they are
saved, but since hardware pushes the registers onto stack, the registers
are restored correctly.

Note that during register saving to stack (step 2), it goes past
0x9000a000. And it seems, based on objdump, there are global symbols
residing there, and it perhaps can cause issues on a non-XIP Kernel
(on XIP, data section is setup later).

Based on the analysis above, manually saving registers onto stack is at
best no-op and at worst can cause data section corruption. Hence remove
storing of registers onto stack before svc.

Fixes: b70cd406 ("ARM: 8671/1: V7M: Preserve registers across switch from Thread to Handler mode")
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Acked-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Merge tag 'asoc-fix-v5.4-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.4

A collection of fixes that have arrived since the merge window.  There
are a small number of core fixes here but they are smaller ones around
error handling.

Support new codec ALC711.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

All the drivers, which use the OPP framework control regulators, which
are already enabled. Typically those regulators are also system critical,
due to providing power to CPU core or system buses. It turned out that
there are cases, where calling regulator_enable() on such boot-enabled
regulator has side-effects and might change its initial voltage due to
performing initial voltage balancing without all restrictions from the
consumers. Until this issue becomes finally solved in regulator core,
avoid calling regulator_enable()/disable() from the OPP framework.

This reverts commit 7f93ff73.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

There are no more active users of DEV_PM_QOS_MIN_FREQUENCY and
DEV_PM_QOS_MAX_FREQUENCY device PM QoS request types, so drop them
along with the code supporting them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

Replace the CPU device PM QoS used for the management of min and max
frequency constraints in cpufreq (and its users) with per-policy
frequency QoS to avoid problems with cpufreq policies covering
more then one CPU.

Namely, a cpufreq driver is registered with the subsys interface
which calls cpufreq_add_dev() for each CPU, starting from CPU0, so
currently the PM QoS notifiers are added to the first CPU in the
policy (i.e. CPU0 in the majority of cases).

In turn, when the cpufreq driver is unregistered, the subsys interface
doing that calls cpufreq_remove_dev() for each CPU, starting from CPU0,
and the PM QoS notifiers are only removed when cpufreq_remove_dev() is
called for the last CPU in the policy, say CPUx, which as a rule is
not CPU0 if the policy covers more than one CPU.  Then, the PM QoS
notifiers cannot be removed, because CPUx does not have them, and
they are still there in the device PM QoS notifiers list of CPU0,
which prevents new PM QoS notifiers from being registered for CPU0
on the next attempt to register the cpufreq driver.

The same issue occurs when the first CPU in the policy goes offline
before unregistering the driver.

After this change it does not matter which CPU is the policy CPU at
the driver registration time and whether or not it is online all the
time, because the frequency QoS is per policy and not per CPU.

Fixes: 67d874c3 ("cpufreq: Register notifiers with the PM QoS framework")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Diagnosed-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/linux-pm/5ad2624194baa2f53acc1f1e627eb7684c577a19.1562210705.git.viresh.kumar@linaro.org/T/#md2d89e95906b8c91c15f582146173dce2e86e99f
Link: https://lore.kernel.org/linux-pm/20191017094612.6tbkwoq4harsjcqv@vireshk-i7/T/#m30d48cc23b9a80467fbaa16e30f90b3828a5a29bSigned-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

Introduce frequency QoS, based on the "raw" low-level PM QoS, to
represent min and max frequency requests and aggregate constraints.

The min and max frequency requests are to be represented by
struct freq_qos_request objects and the aggregate constraints are to
be represented by struct freq_constraints objects.  The latter are
expected to be initialized with the help of freq_constraints_init().

The freq_qos_read_value() helper is defined to retrieve the aggregate
constraints values from a given struct freq_constraints object and
there are the freq_qos_add_request(), freq_qos_update_request() and
freq_qos_remove_request() helpers to manipulate the min and max
frequency requests.  It is assumed that the the helpers will not
run concurrently with each other for the same struct freq_qos_request
object, so if that may be the case, their uses must ensure proper
synchronization between them (e.g. through locking).

In addition, freq_qos_add_notifier() and freq_qos_remove_notifier()
are provided to add and remove notifiers that will trigger on aggregate
constraint changes to and from a given struct freq_constraints object,
respectively.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

Merge tag 'kbuild-fixes-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild fixes from Masahiro Yamada:

 - fix a bashism of setlocalversion

 - do not use the too new --sort option of tar

* tag 'kbuild-fixes-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kheaders: substituting --sort in archive creation
  scripts: setlocalversion: fix a bashism
  kbuild: update comment about KBUILD_ALLDIRS

Pull x86 fixes from Thomas Gleixner:
 "A small set of x86 fixes:

   - Prevent a NULL pointer dereference in the X2APIC code in case of a
     CPU hotplug failure.

   - Prevent boot failures on HP superdome machines by invalidating the
     level2 kernel pagetable entries outside of the kernel area as
     invalid so BIOS reserved space won't be touched unintentionally.

     Also ensure that memory holes are rounded up to the next PMD
     boundary correctly.

   - Enable X2APIC support on Hyper-V to prevent boot failures.

   - Set the paravirt name when running on Hyper-V for consistency

   - Move a function under the appropriate ifdef guard to prevent build
     warnings"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot/acpi: Move get_cmdline_acpi_rsdp() under #ifdef guard
  x86/hyperv: Set pv_info.name to "Hyper-V"
  x86/apic/x2apic: Fix a NULL pointer deref when handling a dying cpu
  x86/hyperv: Make vapic support x2apic mode
  x86/boot/64: Round memory hole size up to next PMD page
  x86/boot/64: Make level2_kernel_pgt pages invalid outside kernel area

Pull irq fixes from Thomas Gleixner:
 "A small set of irq chip driver fixes and updates:

   - Update the SIFIVE PLIC interrupt driver to use the fasteoi handler
     to address the shortcomings of the existing flow handling which was
     prone to lose interrupts

   - Use the proper limit for GIC interrupt line numbers

   - Add retrigger support for the recently merged Anapurna Labs Fabric
     interrupt controller to make it complete

   - Enable the ATMEL AIC5 interrupt controller driver on the new
     SAM9X60 SoC"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/sifive-plic: Switch to fasteoi flow
  irqchip/gic-v3: Fix GIC_LINE_NR accessor
  irqchip/atmel-aic5: Add support for sam9x60 irqchip
  irqchip/al-fic: Add support for irq retrigger

Pull hrtimer fixlet from Thomas Gleixner:
 "A single commit annotating the lockcless access to timer->base with
  READ_ONCE() and adding the WRITE_ONCE() counterparts for completeness"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hrtimer: Annotate lockless access to timer->base

Pull stop-machine fix from Thomas Gleixner:
 "A single fix, amending stop machine with WRITE/READ_ONCE() to address
  the fallout of KCSAN"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  stop_machine: Avoid potential race behaviour

Pull networking fixes from David Miller:
 "I was battling a cold after some recent trips, so quite a bit piled up
  meanwhile, sorry about that.

  Highlights:

   1) Fix fd leak in various bpf selftests, from Brian Vazquez.

   2) Fix crash in xsk when device doesn't support some methods, from
      Magnus Karlsson.

   3) Fix various leaks and use-after-free in rxrpc, from David Howells.

   4) Fix several SKB leaks due to confusion of who owns an SKB and who
      should release it in the llc code. From Eric Biggers.

   5) Kill a bunc of KCSAN warnings in TCP, from Eric Dumazet.

   6) Jumbo packets don't work after resume on r8169, as the BIOS resets
      the chip into non-jumbo mode during suspend. From Heiner Kallweit.

   7) Corrupt L2 header during MPLS push, from Davide Caratti.

   8) Prevent possible infinite loop in tc_ctl_action, from Eric
      Dumazet.

   9) Get register bits right in bcmgenet driver, based upon chip
      version. From Florian Fainelli.

  10) Fix mutex problems in microchip DSA driver, from Marek Vasut.

  11) Cure race between route lookup and invalidation in ipv4, from Wei
      Wang.

  12) Fix performance regression due to false sharing in 'net'
      structure, from Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (145 commits)
  net: reorder 'struct net' fields to avoid false sharing
  net: dsa: fix switch tree list
  net: ethernet: dwmac-sun8i: show message only when switching to promisc
  net: aquantia: add an error handling in aq_nic_set_multicast_list
  net: netem: correct the parent's backlog when corrupted packet was dropped
  net: netem: fix error path for corrupted GSO frames
  macb: propagate errors when getting optional clocks
  xen/netback: fix error path of xenvif_connect_data()
  net: hns3: fix mis-counting IRQ vector numbers issue
  net: usb: lan78xx: Connect PHY before registering MAC
  vsock/virtio: discard packets if credit is not respected
  vsock/virtio: send a credit update when buffer size is changed
  mlxsw: spectrum_trap: Push Ethernet header before reporting trap
  net: ensure correct skb->tstamp in various fragmenters
  net: bcmgenet: reset 40nm EPHY on energy detect
  net: bcmgenet: soft reset 40nm EPHYs before MAC init
  net: phy: bcm7xxx: define soft_reset for 40nm EPHY
  net: bcmgenet: don't set phydev->link from MAC
  net: Update address for MediaTek ethernet driver in MAINTAINERS
  ipv4: fix race condition between route lookup and invalidation
  ...

Intel test robot reported a ~7% regression on TCP_CRR tests
that they bisected to the cited commit.

Indeed, every time a new TCP socket is created or deleted,
the atomic counter net->count is touched (via get_net(net)
and put_net(net) calls)

So cpus might have to reload a contended cache line in
net_hash_mix(net) calls.

We need to reorder 'struct net' fields to move @hash_mix
in a read mostly cache line.

We move in the first cache line fields that can be
dirtied often.

We probably will have to address in a followup patch
the __randomize_layout that was added in linux-4.13,
since this might break our placement choices.

Fixes: 355b9855 ("netns: provide pure entropy for net_hash_mix()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If there are multiple switch trees on the device, only the last one
will be listed, because the arguments of list_add_tail are swapped.

Fixes: 83c0afae ("net: dsa: Add new binding implementation")
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Printing the info message every time more than the max number of mac
addresses are requested generates unnecessary log spam.  Showing it only
when the hw is not already in promiscous mode is equally informative
without being annoying.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

add an error handling in aq_nic_set_multicast_list, it may not
work when hw_multicast_list_set error; and at the same time
it will remove gcc Wunused-but-set-variable warning.
Signed-off-by: Chenwandun <chenwandun@huawei.com>
Reviewed-by: Igor Russkikh <igor.russkikh@aquantia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>