Add missing header file following compiler warning:

  prog_tests/flow_dissector.c: In function ‘tx_tap’:
  prog_tests/flow_dissector.c:175:9: warning: implicit declaration of function ‘writev’; did you mean ‘write’? [-Wimplicit-function-declaration]
    return writev(fd, iov, ARRAY_SIZE(iov));
           ^~~~~~
           write

Fixes: 0905beec ("selftests/bpf: run flow dissector tests in skb-less mode")
Signed-off-by: Alakesh Haloi <alakesh.haloi@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Jiong Wang says:

====================
JIT back-ends need to guarantee high 32-bit cleared whenever one eBPF insn
write low 32-bit sub-register only. It is possible that some JIT back-ends
have failed doing this and are silently generating wrong image.

This set completes the unit tests, so bug on this could be exposed in JITs.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

eBPF ISA specification requires high 32-bit cleared when only low 32-bit
sub-register is written. JIT back-ends must guarantee this semantics when
doing code-gen.

This patch complete unit tests for all of those insns that could be visible
to JIT back-ends and defining sub-registers, if JIT back-ends failed to
guarantee the mentioned semantics, these unit tests will fail.
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

It is better to centralize all sub-register zero extension checks into an
independent file.

This patch takes the first step to move existing sub-register zero
extension checks into subreg.c.
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Backlog work for psock (sk_psock_backlog) might sleep while waiting
for memory to free up when sending packets. However, while sleeping
the socket may be closed and removed from the map by the user space
side.

This breaks an assumption in sk_stream_wait_memory, which expects the
wait queue to be still there when it wakes up resulting in a
use-after-free shown below. To fix his mark sendmsg as MSG_DONTWAIT
to avoid the sleep altogether. We already set the flag for the
sendpage case but we missed the case were sendmsg is used.
Sockmap is currently the only user of skb_send_sock_locked() so only
the sockmap paths should be impacted.

==================================================================
BUG: KASAN: use-after-free in remove_wait_queue+0x31/0x70
Write of size 8 at addr ffff888069a0c4e8 by task kworker/0:2/110

CPU: 0 PID: 110 Comm: kworker/0:2 Not tainted 5.0.0-rc2-00335-g28f9d1a3-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014
Workqueue: events sk_psock_backlog
Call Trace:
 print_address_description+0x6e/0x2b0
 ? remove_wait_queue+0x31/0x70
 kasan_report+0xfd/0x177
 ? remove_wait_queue+0x31/0x70
 ? remove_wait_queue+0x31/0x70
 remove_wait_queue+0x31/0x70
 sk_stream_wait_memory+0x4dd/0x5f0
 ? sk_stream_wait_close+0x1b0/0x1b0
 ? wait_woken+0xc0/0xc0
 ? tcp_current_mss+0xc5/0x110
 tcp_sendmsg_locked+0x634/0x15d0
 ? tcp_set_state+0x2e0/0x2e0
 ? __kasan_slab_free+0x1d1/0x230
 ? kmem_cache_free+0x70/0x140
 ? sk_psock_backlog+0x40c/0x4b0
 ? process_one_work+0x40b/0x660
 ? worker_thread+0x82/0x680
 ? kthread+0x1b9/0x1e0
 ? ret_from_fork+0x1f/0x30
 ? check_preempt_curr+0xaf/0x130
 ? iov_iter_kvec+0x5f/0x70
 ? kernel_sendmsg_locked+0xa0/0xe0
 skb_send_sock_locked+0x273/0x3c0
 ? skb_splice_bits+0x180/0x180
 ? start_thread+0xe0/0xe0
 ? update_min_vruntime.constprop.27+0x88/0xc0
 sk_psock_backlog+0xb3/0x4b0
 ? strscpy+0xbf/0x1e0
 process_one_work+0x40b/0x660
 worker_thread+0x82/0x680
 ? process_one_work+0x660/0x660
 kthread+0x1b9/0x1e0
 ? __kthread_create_on_node+0x250/0x250
 ret_from_fork+0x1f/0x30

Fixes: 20bf50de ("skbuff: Function to send an skbuf on a socket")
Reported-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Once psock gets unlinked from its sock (sk_psock_drop), user-space can
still trigger a call to sk->sk_write_space by setting TCP_NOTSENT_LOWAT
socket option. This causes a null-ptr-deref because we try to read
psock->saved_write_space from sk_psock_write_space:

==================================================================
BUG: KASAN: null-ptr-deref in sk_psock_write_space+0x69/0x80
Read of size 8 at addr 00000000000001a0 by task sockmap-echo/131

CPU: 0 PID: 131 Comm: sockmap-echo Not tainted 5.2.0-rc1-00094-gf49aa1de #81
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014
Call Trace:
 ? sk_psock_write_space+0x69/0x80
 __kasan_report.cold.2+0x5/0x3f
 ? sk_psock_write_space+0x69/0x80
 kasan_report+0xe/0x20
 sk_psock_write_space+0x69/0x80
 tcp_setsockopt+0x69a/0xfc0
 ? tcp_shutdown+0x70/0x70
 ? fsnotify+0x5b0/0x5f0
 ? remove_wait_queue+0x90/0x90
 ? __fget_light+0xa5/0xf0
 __sys_setsockopt+0xe6/0x180
 ? sockfd_lookup_light+0xb0/0xb0
 ? vfs_write+0x195/0x210
 ? ksys_write+0xc9/0x150
 ? __x64_sys_read+0x50/0x50
 ? __bpf_trace_x86_fpu+0x10/0x10
 __x64_sys_setsockopt+0x61/0x70
 do_syscall_64+0xc5/0x520
 ? vmacache_find+0xc0/0x110
 ? syscall_return_slowpath+0x110/0x110
 ? handle_mm_fault+0xb4/0x110
 ? entry_SYSCALL_64_after_hwframe+0x3e/0xbe
 ? trace_hardirqs_off_caller+0x4b/0x120
 ? trace_hardirqs_off_thunk+0x1a/0x3a
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f2e5e7cdcce
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b1 66 2e 0f 1f 84 00 00 00 00 00
0f 1f 44 00 00 f3 0f 1e fa 49 89 ca b8 36 00 00 00 0f 05 <48> 3d 01 f0 ff
ff 73 01 c3 48 8b 0d 8a 11 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffed011b778 EFLAGS: 00000206 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f2e5e7cdcce
RDX: 0000000000000019 RSI: 0000000000000006 RDI: 0000000000000007
RBP: 00007ffed011b790 R08: 0000000000000004 R09: 00007f2e5e84ee80
R10: 00007ffed011b788 R11: 0000000000000206 R12: 00007ffed011b78c
R13: 00007ffed011b788 R14: 0000000000000007 R15: 0000000000000068
==================================================================

Restore the saved sk_write_space callback when psock is being dropped to
fix the crash.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add three tests to test_verifier/basic_instr that make sure that the
high 32-bits of the destination register is cleared after an ALU32
and/or/xor.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

When using 32-bit subregisters (ALU32), the RISC-V JIT would not clear
the high 32-bits of the target register and therefore generate
incorrect code.

E.g., in the following code:

  $ cat test.c
  unsigned int f(unsigned long long a,
  	       unsigned int b)
  {
  	return (unsigned int)a & b;
  }

  $ clang-9 -target bpf -O2 -emit-llvm -S test.c -o - | \
  	llc-9 -mattr=+alu32 -mcpu=v3
  	.text
  	.file	"test.c"
  	.globl	f
  	.p2align	3
  	.type	f,@function
  f:
  	r0 = r1
  	w0 &= w2
  	exit
  .Lfunc_end0:
  	.size	f, .Lfunc_end0-f

The JIT would not clear the high 32-bits of r0 after the
and-operation, which in this case might give an incorrect return
value.

After this patch, that is not the case, and the upper 32-bits are
cleared.
Reported-by: Jiong Wang <jiong.wang@netronome.com>
Fixes: 2353ecc6 ("bpf, riscv: add BPF JIT for RV64G")
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

GCC 9 fails to calculate the size of local constant strings and produces a
false positive:

samples/bpf/task_fd_query_user.c: In function ‘test_debug_fs_uprobe’:
samples/bpf/task_fd_query_user.c:242:67: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size 215 [-Wformat-truncation=]
  242 |  snprintf(buf, sizeof(buf), "/sys/kernel/debug/tracing/events/%ss/%s/id",
      |                                                                   ^~
  243 |    event_type, event_alias);
      |                ~~~~~~~~~~~
samples/bpf/task_fd_query_user.c:242:2: note: ‘snprintf’ output between 45 and 300 bytes into a destination of size 256
  242 |  snprintf(buf, sizeof(buf), "/sys/kernel/debug/tracing/events/%ss/%s/id",
      |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  243 |    event_type, event_alias);
      |    ~~~~~~~~~~~~~~~~~~~~~~~~

Workaround this by lowering the buffer size to a reasonable value.
Related GCC Bugzilla: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83431Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

If the trace for read is larger than 4096, the return
value sz will be 4096. This results in off-by-one error
on buf:

    static char buf[4096];
    ssize_t sz;

    sz = read(trace_fd, buf, sizeof(buf));
    if (sz > 0) {
        buf[sz] = 0;
        puts(buf);
    }
Signed-off-by: Chang-Hsien Tsai <luke.tw@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The BPF_FUNC_sk_lookup_xxx helpers return RET_PTR_TO_SOCKET_OR_NULL.
Meaning a fullsock ptr and its fullsock's fields in bpf_sock can be
accessed, e.g. type, protocol, mark and priority.
Some new helper, like bpf_sk_storage_get(), also expects
ARG_PTR_TO_SOCKET is a fullsock.

bpf_sk_lookup() currently calls sk_to_full_sk() before returning.
However, the ptr returned from sk_to_full_sk() is not guaranteed
to be a fullsock.  For example, it cannot get a fullsock if sk
is in TCP_TIME_WAIT.

This patch checks for sk_fullsock() before returning. If it is not
a fullsock, sock_gen_put() is called if needed and then returns NULL.

Fixes: 6acc9b43 ("bpf: Add helper to retrieve socket in BPF")
Cc: Joe Stringer <joe@isovalent.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Joe Stringer <joe@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

__bpf_skc_lookup takes a socket tuple and the length of the
tuple as an argument. Based on the length, it decides which
address family to pass to the helper function sk_lookup.

In case of AF_INET6, it fails to verify that the length
of the tuple is long enough. sk_lookup may therefore access
data past the end of the tuple.

Fixes: 6acc9b43 ("bpf: Add helper to retrieve socket in BPF")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Fix Sphinx warnings in Documentation/networking/af_xdp.rst by
adding indentation:

Documentation/networking/af_xdp.rst:319: WARNING: Literal block expected; none found.
Documentation/networking/af_xdp.rst:326: WARNING: Literal block expected; none found.

Fixes: 0f4a9b7d ("xsk: add FAQ to facilitate for first time users")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

stmmac_init_chan() needs to be called before stmmac_init_rx_chan() and
stmmac_init_tx_chan(). This is because if PBLx8 is to be used,
"DMA_CH(#i)_Control.PBLx8" needs to be set before programming
"DMA_CH(#i)_TX_Control.TxPBL" and "DMA_CH(#i)_RX_Control.RxPBL".

Fixes: 47f2a9ce ("net: stmmac: dma channel init prepared for multiple queues")
Reviewed-by: Zhang, Baoli <baoli.zhang@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Weifeng Voon <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently ethtool was not able to get/set the flow control due to a
missing "!". It will always return -EOPNOTSUPP even the device is
flow control supported.

This patch fixes the condition check for ethtool flow control get/set
function for ETHTOOL_LINK_MODE_Asym_Pause_BIT.

Fixes: 3c1bcc86 (“net: ethernet: Convert phydev advertize and supported from u32 to link mode”)
Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com>
Reviewed-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon, Weifeng <weifeng.voon@intel.com@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

QRTR packets has a message type in the header, which is repeated in the
control header. For control packets we therefor copy the type from
beginning of the outgoing payload and use that as message type.

For non-control messages an endianness fix introduced in v5.2-rc1 caused the
type to be 0, rather than QRTR_TYPE_DATA, causing all messages to be dropped by
the receiver. Fix this by converting and using qrtr_type, which will remain
QRTR_TYPE_DATA for non-control messages.

Fixes: 8f5e2451 ("net: qrtr: use protocol endiannes variable")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

fix accelleration to acceleration
Signed-off-by: Weitao Hou <houweitaoo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ever since commit 3a06c7ac ("posix-clocks: Remove interval timer
facility and mmap/fasync callbacks") the possibility of PHC based
posix timers has been removed.  In addition it will probably never
make sense to implement this functionality.

This patch removes the misleading example code which seems to suggest
that posix timers for PHC devices will ever be a thing.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fix abord to abort
Signed-off-by: Weitao Hou <houweitaoo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hangbin Liu says:

====================
kselftests: fib_rule_tests: fix "from $SRC_IP iif $DEV" match testing

As all the IPv4 testing addresses are in the same subnet and egress device ==
ingress device, to pass "from $SRC_IP iif $DEV" match test, we need enable
forwarding to get the route entry.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

As all the testing addresses are in the same subnet and egress device ==
ingress device. We need enable forwarding to get the route entry.

Also disable rp_filer separately as some distributions enable it in
startup scripts.

Fixes: 65b2b493 ("selftests: net: initial fib rule tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The IPv4 testing address are all in 192.51.100.0 subnet. It doesn't make
sense to set a 198.51.100.1 local address. Should be a typo.

Fixes: 65b2b493 ("selftests: net: initial fib rule tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TLV_SET is called with a data pointer and a len parameter that tells us
how many bytes are pointed to by data. When invoking memcpy() we need
to careful to only copy len bytes.

Previously we would copy TLV_LENGTH(len) bytes which would copy an extra
4 bytes past the end of the data pointer which newer GCC versions
complain about.

 In file included from test.c:17:
 In function 'TLV_SET',
     inlined from 'test' at test.c:186:5:
 /usr/include/linux/tipc_config.h:317:3:
 warning: 'memcpy' forming offset [33, 36] is out of the bounds [0, 32]
 of object 'bearer_name' with type 'char[32]' [-Warray-bounds]
     memcpy(TLV_DATA(tlv_ptr), data, tlv_len);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 test.c: In function 'test':
 test.c::161:10: note:
 'bearer_name' declared here
     char bearer_name[TIPC_MAX_BEARER_NAME];
          ^~~~~~~~~~~

We still want to ensure any padding bytes at the end are initialised, do
this with a explicit memset() rather than copy bytes past the end of
data. Apply the same logic to TCM_SET.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Benedikt Spranger says:

====================
Convert mdio wait function to use readx_poll_timeout()

On loaded systems with a preemptible kernel both functions
axienet_mdio_wait_until_ready() and xemaclite_mdio_wait() may report a
false positive error return.
Convert both functions to use readx_poll_timeout() to handle the
situation in a safe manner.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

On loaded systems with a preemptible kernel the mdio_wait() function may
report an error while everything is working fine:

xemaclite_mdio_wait():
  xemaclite_readl() -> chip not ready
  --> interrupt here (other work for some time / chip become ready)
  if (time_before_eq(end, jiffies))
    --> false positive error report

Replace the current code with readx_poll_timeout() which takes care
of the situation.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

On loaded systems with a preemptible kernel the mdio_wait() function may
report an error while everything is working fine:

axienet_mdio_wait_until_ready():
  axienet_ior() -> chip not ready
  --> interrupt here (other work for some time / chip become ready)
  if (time_before_eq(end, jiffies))
    --> false positive error report

Replace the current code with readx_poll_timeout() which take care
of the situation.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

This patch fixes the following warning:

net/8021q/vlan_dev.c: In function ‘vlan_dev_ioctl’:
net/8021q/vlan_dev.c:374:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (!net_eq(dev_net(dev), &init_net))
      ^
net/8021q/vlan_dev.c:376:2: note: here
  case SIOCGMIIPHY:
  ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

This patch fixes the following warning:

drivers/net/macvlan.c: In function ‘macvlan_do_ioctl’:
drivers/net/macvlan.c:839:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (!net_eq(dev_net(dev), &init_net))
      ^
drivers/net/macvlan.c:841:2: note: here
  case SIOCGHWTSTAMP:
  ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Querying EEPROM high pages data for SFP module is currently
not supported by our driver but is still tried, resulting in
invalid FW queries.

Set the EEPROM ethtool data length to 256 for SFP module to
limit the reading for page 0 only and prevent invalid FW queries.

Fixes: 7202da8b ("ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support")
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Error message printed:
modprobe: ERROR: could not insert 'tipc': Address family not
supported by protocol.
when modprobe tipc after the following patch: switch order of
device registration, commit 7e27e8d6
("tipc: switch order of device registration to fix a crash")

Because sock_create_kern(net, AF_TIPC, ...) called by
tipc_topsrv_create_listener() in the initialization process
of tipc_init_net(), so tipc_socket_init() must be execute before that.
Meanwhile, tipc_net_id need to be initialized when sock_create()
called, and tipc_socket_init() is no need to be called for each namespace.

I add a variable tipc_topsrv_net_ops, and split the
register_pernet_subsys() of tipc into two parts, and split
tipc_socket_init() with initialization of pernet params.

By the way, I fixed resources rollback error when tipc_bcast_init()
failed in tipc_init_net().

Fixes: 7e27e8d6 ("tipc: switch order of device registration to fix a crash")
Signed-off-by: Junwei Hu <hujunwei4@huawei.com>
Reported-by: Wang Wang <wangwang2@huawei.com>
Reported-by: syzbot+1e8114b61079bfe9cbc5@syzkaller.appspotmail.com
Reviewed-by: Kang Zhou <zhoukang7@huawei.com>
Reviewed-by: Suanming Mou <mousuanming@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull btrfs fixes from David Sterba:
 "Notable highlights:

   - fixes for some long-standing bugs in fsync that were quite hard to
     catch but now finaly fixed

   - some fixups to error handling paths that did not properly clean up
     (locking, memory)

   - fix to space reservation for inheriting properties"

* tag 'for-5.2-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: tree-checker: detect file extent items with overlapping ranges
  Btrfs: fix race between ranged fsync and writeback of adjacent ranges
  Btrfs: avoid fallback to transaction commit during fsync of files with holes
  btrfs: extent-tree: Fix a bug that btrfs is unable to add pinned bytes
  btrfs: sysfs: don't leak memory when failing add fsid
  btrfs: sysfs: Fix error path kobject memory leak
  Btrfs: do not abort transaction at btrfs_update_root() after failure to COW path
  btrfs: use the existing reserved items for our first prop for inheritance
  btrfs: don't double unlock on error in btrfs_punch_hole
  btrfs: Check the compression level before getting a workspace

Pull networking fixes from David Miller:1) Use after free in __dev_map_entry_free(), from Eric Dumazet.

 1) Use after free in __dev_map_entry_free(), from Eric Dumazet.

 2) Fix TCP retransmission timestamps on passive Fast Open, from Yuchung
    Cheng.

 3) Orphan NFC, we'll take the patches directly into my tree. From
    Johannes Berg.

 4) We can't recycle cloned TCP skbs, from Eric Dumazet.

 5) Some flow dissector bpf test fixes, from Stanislav Fomichev.

 6) Fix RCU marking and warnings in rhashtable, from Herbert Xu.

 7) Fix some potential fib6 leaks, from Eric Dumazet.

 8) Fix a _decode_session4 uninitialized memory read bug fix that got
    lost in a merge. From Florian Westphal.

 9) Fix ipv6 source address routing wrt. exception route entries, from
    Wei Wang.

10) The netdev_xmit_more() conversion was not done %100 properly in mlx5
    driver, fix from Tariq Toukan.

11) Clean up botched merge on netfilter kselftest, from Florian
    Westphal.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (74 commits)
  of_net: fix of_get_mac_address retval if compiled without CONFIG_OF
  net: fix kernel-doc warnings for socket.c
  net: Treat sock->sk_drops as an unsigned int when printing
  kselftests: netfilter: fix leftover net/net-next merge conflict
  mlxsw: core: Prevent reading unsupported slave address from SFP EEPROM
  mlxsw: core: Prevent QSFP module initialization for old hardware
  vsock/virtio: Initialize core virtio vsock before registering the driver
  net/mlx5e: Fix possible modify header actions memory leak
  net/mlx5e: Fix no rewrite fields with the same match
  net/mlx5e: Additional check for flow destination comparison
  net/mlx5e: Add missing ethtool driver info for representors
  net/mlx5e: Fix number of vports for ingress ACL configuration
  net/mlx5e: Fix ethtool rxfh commands when CONFIG_MLX5_EN_RXNFC is disabled
  net/mlx5e: Fix wrong xmit_more application
  net/mlx5: Fix peer pf disable hca command
  net/mlx5: E-Switch, Correct type to u16 for vport_num and int for vport_index
  net/mlx5: Add meaningful return codes to status_to_err function
  net/mlx5: Imply MLXFW in mlx5_core
  Revert "tipc: fix modprobe tipc failed after switch order of device registration"
  vsock/virtio: free packets during the socket release
  ...

Pull UBIFS fixes from Richard Weinberger:

 - build errors wrt xattrs

 - mismerge which lead to a wrong Kconfig ifdef

 - missing endianness conversion

* tag 'upstream-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubifs: Convert xattr inum to host order
  ubifs: Use correct config name for encryption
  ubifs: Fix build error without CONFIG_UBIFS_FS_XATTR

Merge yet more updates from Andrew Morton:
 "A few final bits:

   - large changes to vmalloc, yielding large performance benefits

   - tweak the console-flush-on-panic code

   - a few fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  panic: add an option to replay all the printk message in buffer
  initramfs: don't free a non-existent initrd
  fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount
  mm/compaction.c: correct zone boundary handling when isolating pages from a pageblock
  mm/vmap: add DEBUG_AUGMENT_LOWEST_MATCH_CHECK macro
  mm/vmap: add DEBUG_AUGMENT_PROPAGATE_CHECK macro
  mm/vmalloc.c: keep track of free blocks for vmap allocation

Pull more Kbuild updates from Masahiro Yamada:

 - remove unneeded use of cc-option, cc-disable-warning, cc-ldoption

 - exclude tracked files from .gitignore

 - re-enable -Wint-in-bool-context warning

 - refactor samples/Makefile

 - stop building immediately if syncconfig fails

 - do not sprinkle error messages when $(CC) does not exist

 - move arch/alpha/defconfig to the configs subdirectory

 - remove crappy header search path manipulation

 - add comment lines to .config to clarify the end of menu blocks

 - check uniqueness of module names (adding new warnings intentionally)

* tag 'kbuild-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (24 commits)
  kconfig: use 'else ifneq' for Makefile to improve readability
  kbuild: check uniqueness of module names
  kconfig: Terminate menu blocks with a comment in the generated config
  kbuild: add LICENSES to KBUILD_ALLDIRS
  kbuild: remove 'addtree' and 'flags' magic for header search paths
  treewide: prefix header search paths with $(srctree)/
  media: prefix header search paths with $(srctree)/
  media: remove unneeded header search paths
  alpha: move arch/alpha/defconfig to arch/alpha/configs/defconfig
  kbuild: terminate Kconfig when $(CC) or $(LD) is missing
  kbuild: turn auto.conf.cmd into a mandatory include file
  .gitignore: exclude .get_maintainer.ignore and .gitattributes
  kbuild: add all Clang-specific flags unconditionally
  kbuild: Don't try to add '-fcatch-undefined-behavior' flag
  kbuild: add some extra warning flags unconditionally
  kbuild: add -Wvla flag unconditionally
  arch: remove dangling asm-generic wrappers
  samples: guard sub-directories with CONFIG options
  kbuild: re-enable int-in-bool-context warning
  MAINTAINERS: kbuild: Add pattern for scripts/*vmlinux*
  ...

Pull i2c updates from Wolfram Sang:
 "Some I2C core API additions which are kind of simple but enhance error
  checking for users a lot, especially by returning errno now.

  There are wrappers to still support the old API but it will be removed
  once all users are converted"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: core: add device-managed version of i2c_new_dummy
  i2c: core: improve return value handling of i2c_new_device and i2c_new_dummy

Pull ext4 fixes from Ted Ts'o:
 "Some bug fixes, and an update to the URL's for the final version of
  Unicode 12.1.0"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: avoid panic during forced reboot due to aborted journal
  ext4: fix block validity checks for journal inodes using indirect blocks
  unicode: update to Unicode 12.1.0 final
  unicode: add missing check for an error return from utf8lookup()
  ext4: fix miscellaneous sparse warnings
  ext4: unsigned int compared against zero
  ext4: fix use-after-free in dx_release()
  ext4: fix data corruption caused by overlapping unaligned and aligned IO
  jbd2: fix potential double free
  ext4: zero out the unused memory region in the extent tree block

Pull cifs fixes from Steve French:
 "Minor cleanup and fixes, one for stable, four rdma (smbdirect)
  related. Also adds SEEK_HOLE support"

* tag '5.2-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: add support for SEEK_DATA and SEEK_HOLE
  Fixed https://bugzilla.kernel.org/show_bug.cgi?id=202935 allow write on the same file
  cifs: Allocate memory for all iovs in smb2_ioctl
  cifs: Don't match port on SMBDirect transport
  cifs:smbd Use the correct DMA direction when sending data
  cifs:smbd When reconnecting to server, call smbd_destroy() after all MIDs have been called
  cifs: use the right include for signal_pending()
  smb3: trivial cleanup to smb2ops.c
  cifs: cleanup smb2ops.c and normalize strings
  smb3: display session id in debug data

Pull perf tooling updates from Ingo Molnar:
 "perf.data:

   - Streaming compression of perf ring buffer into
     PERF_RECORD_COMPRESSED user space records, resulting in ~3-5x
     perf.data file size reduction on variety of tested workloads what
     saves storage space on larger server systems where perf.data size
     can easily reach several tens or even hundreds of GiBs, especially
     when profiling with DWARF-based stacks and tracing of context
     switches.

  perf record:

   - Improve -user-regs/intr-regs suggestions to overcome errors

  perf annotate:

   - Remove hist__account_cycles() from callback, speeding up branch
     processing (perf record -b)

  perf stat:

   - Add a 'percore' event qualifier, e.g.: -e
     cpu/event=0,umask=0x3,percore=1/, that sums up the event counts for
     both hardware threads in a core.

     We can already do this with --per-core, but it's often useful to do
     this together with other metrics that are collected per hardware
     thread.

     I.e. now its possible to do this per-event, and have it mixed with
     other events not aggregated by core.

  arm64:

   - Map Brahma-B53 CPUID to cortex-a53 events.

   - Add Cortex-A57 and Cortex-A72 events.

  csky:

   - Add DWARF register mappings for libdw, allowing --call-graph=dwarf
     to work on the C-SKY arch.

  x86:

   - Add support for recording and printing XMM registers, available,
     for instance, on Icelake.

   - Add uncore_upi (Intel's "Ultra Path Interconnect" events) JSON
     support. UPI replaced the Intel QuickPath Interconnect (QPI) in
     Xeon Skylake-SP.

  Intel PT:

   - Fix instructions sampling rate.

   - Timestamp fixes.

   - Improve exported-sql-viewer GUI, allowing, for instance, to
     copy'n'paste the trees, useful for e-mailing"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
  perf stat: Support 'percore' event qualifier
  perf stat: Factor out aggregate counts printing
  perf tools: Add a 'percore' event qualifier
  perf docs: Add description for stderr
  perf intel-pt: Fix sample timestamp wrt non-taken branches
  perf intel-pt: Fix improved sample timestamp
  perf intel-pt: Fix instructions sampling rate
  perf regs x86: Add X86 specific arch__intr_reg_mask()
  perf parse-regs: Add generic support for arch__intr/user_reg_mask()
  perf parse-regs: Split parse_regs
  perf vendor events arm64: Add Cortex-A57 and Cortex-A72 events
  perf vendor events arm64: Map Brahma-B53 CPUID to cortex-a53 events
  perf vendor events arm64: Remove [[:xdigit:]] wildcard
  perf jevents: Remove unused variable
  perf test zstd: Fixup verbose mode output
  perf tests: Implement Zstd comp/decomp integration test
  perf inject: Enable COMPRESSED record decompression
  perf report: Implement perf.data record decompression
  perf record: Implement -z,--compression_level[=<n>] option
  perf report: Add stub processing of compressed events for -D
  ...