- 04 Feb, 2022 19 commits
-
-
Alex Elder authored
Create a new function that returns true if all transactions for a channel are available for use. Use it in ipa_endpoint_replenish_enable() to see whether to start replenishing, and in ipa_endpoint_replenish() to determine whether it's necessary after a failure to schedule delayed work to ensure a future replenish attempt occurs. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alex Elder authored
Rather than determining when to stop replenishing using the replenish backlog, just stop when we have exhausted all available transactions. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alex Elder authored
When replenishing, have ipa_endpoint_replenish() allocate a transaction, and pass that to ipa_endpoint_replenish_one() to fill. Then, if that produces no error, commit the transaction within the replenish loop as well. In this way we can distinguish between transaction failures and buffer allocation/mapping failures. Failure to allocate a transaction simply means the hardware already has as many receive buffers as it can hold. In that case we can break out of the replenish loop because there's nothing more to do. If we fail to allocate or map pages for the receive buffer, just try again later. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alex Elder authored
Decide whether the doorbell should be signaled when committing a replenish transaction in the main replenish loop, rather than in ipa_endpoint_replenish_one(). This is a step to facilitate the next patch. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alex Elder authored
Three spots call ipa_endpoint_replenish(), and just one of those requests that the backlog be incremented after completing the replenish operation. Instead, have the caller increment the backlog, and get rid of the add_one argument to ipa_endpoint_replenish(). Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alex Elder authored
A transaction failure only occurs if no more transactions are available for an endpoint. It's a very cheap test. When replenishing an RX endpoint buffer, there's no point in allocating pages if transactions are exhausted. So don't bother doing so unless the transaction allocation succeeds. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alex Elder authored
The replenish_saved field keeps track of the number of times a new buffer is added to the backlog when replenishing is disabled. We don't really use it though, so there's no need for us to track it separately. Whether replenishing is enabled or not, we can simply increment the backlog. Get rid of replenish_saved, and initialize and increment the backlog where it would have otherwise been used. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
TLS recvmsg() passes user pages as destination for decrypt. The decrypt operation is repeated record by record, each record being 16kB, max. TLS allocates an sg_table and uses iov_iter_get_pages() to populate it with enough pages to fit the decrypted record. Even though we decrypt a single message at a time we size the sg_table based on the entire length of the iovec. This leads to unnecessarily large allocations, risking triggering OOM conditions. Use iov_iter_truncate() / iov_iter_reexpand() to construct a "capped" version of iov_iter_npages(). Alternatively we could parametrize iov_iter_npages() to take the size as arg instead of using i->count, or do something else.. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
Populate the supported interfaces and MAC capabilities for the Realtek rtl8365 DSA switch and remove the old validate implementation to allow DSA to use phylink_generic_validate() for this switch driver. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2022-02-03 This series contains updates to the i40e client header file and driver. Mateusz disables HW TC offload by default. Joe Damato removes a no longer used statistic. Jakub Kicinski removes an unused enum from the client header file. Jedrzej changes some admin queue commands to occur under atomic context and adds new functions for admin queue MAC VLAN filters to avoid a potential race that could occur due storing results in a structure that could be overwritten by the next admin queue call. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Horatiu Vultur authored
Convert lan966x to use the mac_select_interface instead of phylink_set_pcs. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20220202114949.833075-1-horatiu.vultur@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Guillaume Nault authored
Using tos 0x1 with 'ip route get <IPv4 address> ...' doesn't test much of the tos option handling: 0x1 just sets an ECN bit, which is cleared by inet_rtm_getroute() before doing the fib lookup. Let's use 0x10 instead, which is actually taken into account in the route lookup (and is less surprising for the reader). For consistency, use 0x10 for the IPv6 route lookup too (IPv6 currently doesn't clear ECN bits, but might do so in the future). Signed-off-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/d61119e68d01ba7ef3ba50c1345a5123a11de123.1643815297.git.gnault@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Guillaume Nault authored
Although both iproute2 and the kernel accept 1 and 2 as tos values for new routes, those are invalid. These values only set ECN bits, which are ignored during IPv4 fib lookups. Therefore, no packet can actually match such routes. This selftest therefore only succeeds because it doesn't verify that the new routes do actually work in practice (it just checks if the routes are offloaded or not). It makes more sense to use tos values that don't conflict with ECN. This way, the selftest won't be affected if we later decide to warn or even reject invalid tos configurations for new routes. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/5e43b343720360a1c0e4f5947d9e917b26f30fbf.1643826556.git.gnault@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
__dev_alloc_name() allocates a private zeroed page, then sets bits in it while iterating through net devices. It can use __set_bit() to avoid unnecessary locked operations. Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220203064609.3242863-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Kees Cook authored
While the stackleak plugin was already using notrace, objtool is now a bit more picky. Update the notrace uses to noinstr. Silences the following objtool warnings when building with: CONFIG_DEBUG_ENTRY=y CONFIG_STACK_VALIDATION=y CONFIG_VMLINUX_VALIDATION=y CONFIG_GCC_PLUGIN_STACKLEAK=y vmlinux.o: warning: objtool: do_syscall_64()+0x9: call to stackleak_track_stack() leaves .noinstr.text section vmlinux.o: warning: objtool: do_int80_syscall_32()+0x9: call to stackleak_track_stack() leaves .noinstr.text section vmlinux.o: warning: objtool: exc_general_protection()+0x22: call to stackleak_track_stack() leaves .noinstr.text section vmlinux.o: warning: objtool: fixup_bad_iret()+0x20: call to stackleak_track_stack() leaves .noinstr.text section vmlinux.o: warning: objtool: do_machine_check()+0x27: call to stackleak_track_stack() leaves .noinstr.text section vmlinux.o: warning: objtool: .text+0x5346e: call to stackleak_erase() leaves .noinstr.text section vmlinux.o: warning: objtool: .entry.text+0x143: call to stackleak_erase() leaves .noinstr.text section vmlinux.o: warning: objtool: .entry.text+0x10eb: call to stackleak_erase() leaves .noinstr.text section vmlinux.o: warning: objtool: .entry.text+0x17f9: call to stackleak_erase() leaves .noinstr.text section Note that the plugin's addition of calls to stackleak_track_stack() from noinstr functions is expected to be safe, as it isn't runtime instrumentation and is self-contained. Cc: Alexander Popov <alex.popov@linux.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, netfilter, and ieee802154. Current release - regressions: - Partially revert "net/smc: Add netlink net namespace support", fix uABI breakage - netfilter: - nft_ct: fix use after free when attaching zone template - nft_byteorder: track register operations Previous releases - regressions: - ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback - phy: qca8081: fix speeds lower than 2.5Gb/s - sched: fix use-after-free in tc_new_tfilter() Previous releases - always broken: - tcp: fix mem under-charging with zerocopy sendmsg() - tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data() - neigh: do not trigger immediate probes on NUD_FAILED from neigh_managed_work, avoid a deadlock - bpf: use VM_MAP instead of VM_ALLOC for ringbuf, avoid KASAN false-positives - netfilter: nft_reject_bridge: fix for missing reply from prerouting - smc: forward wakeup to smc socket waitqueue after fallback - ieee802154: - return meaningful error codes from the netlink helpers - mcr20a: fix lifs/sifs periods - at86rf230, ca8210: stop leaking skbs on error paths - macsec: add missing un-offload call for NETDEV_UNREGISTER of parent - ax25: add refcount in ax25_dev to avoid UAF bugs - eth: mlx5e: - fix SFP module EEPROM query - fix broken SKB allocation in HW-GRO - IPsec offload: fix tunnel mode crypto for non-TCP/UDP flows - eth: amd-xgbe: - fix skb data length underflow - ensure reset of the tx_timer_active flag, avoid Tx timeouts - eth: stmmac: fix runtime pm use in stmmac_dvr_remove() - eth: e1000e: handshake with CSME starts from Alder Lake platforms" * tag 'net-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) ax25: fix reference count leaks of ax25_dev net: stmmac: ensure PTP time register reads are consistent net: ipa: request IPA register values be retained dt-bindings: net: qcom,ipa: add optional qcom,qmp property tools/resolve_btfids: Do not print any commands when building silently bpf: Use VM_MAP instead of VM_ALLOC for ringbuf net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data() net: sparx5: do not refer to skb after passing it on Partially revert "net/smc: Add netlink net namespace support" net/mlx5e: Avoid field-overflowing memcpy() net/mlx5e: Use struct_group() for memcpy() region net/mlx5e: Avoid implicit modify hdr for decap drop rule net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP traffic net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated traffic net/mlx5e: Don't treat small ceil values as unlimited in HTB offload net/mlx5: E-Switch, Fix uninitialized variable modact net/mlx5e: Fix handling of wrong devices during bond netevent net/mlx5e: Fix broken SKB allocation in HW-GRO net/mlx5e: Fix wrong calculation of header index in HW_GRO ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinuxLinus Torvalds authored
Pull selinux fix from Paul Moore: "One small SELinux patch to ensure that a policy structure field is properly reset after freeing so that we don't inadvertently do a double-free on certain error conditions" * tag 'selinux-pr-20220203' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: fix double free of cond_list on error paths
-
Linus Torvalds authored
Merge tag 'linux-kselftest-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "Important fixes to several tests and documentation clarification on running mainline kselftest on stable releases. A few notable fixes: - fix kselftest run hang due to child processes that haven't been terminated. Fix signals all child processes - fix false pass/fail results from vdso_test_abi, openat2, mincore - build failures when using -j (multiple jobs) option - exec test build failure due to incorrect build rule for a run-time created "pipe" - zram test fixes related to interaction with zram-generator to make sure zram test to coordinate deleted with zram-generator - zram test compression ratio calculation fix and skipping max_comp_streams. - increasing rtc test timeout - cpufreq test to write test results to stdout which will necessary on automated test systems" * tag 'linux-kselftest-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kselftest: Fix vdso_test_abi return status selftests: skip mincore.check_file_mmap when fs lacks needed support selftests: openat2: Skip testcases that fail with EOPNOTSUPP selftests: openat2: Add missing dependency in Makefile selftests: openat2: Print also errno in failure messages selftests: futex: Use variable MAKE instead of make selftests/exec: Remove pipe from TEST_GEN_FILES selftests/zram: Adapt the situation that /dev/zram0 is being used selftests/zram01.sh: Fix compression ratio calculation selftests/zram: Skip max_comp_streams interface on newer kernel docs/kselftest: clarify running mainline tests on stables kselftest: signal all child processes selftests: cpufreq: Write test output to stdout as well selftests: rtc: Increase test timeout so that all tests run
-
- 03 Feb, 2022 21 commits
-
-
Duoming Zhou authored
The previous commit d01ffb9e ("ax25: add refcount in ax25_dev to avoid UAF bugs") introduces refcount into ax25_dev, but there are reference leak paths in ax25_ctl_ioctl(), ax25_fwd_ioctl(), ax25_rt_add(), ax25_rt_del() and ax25_rt_opt(). This patch uses ax25_dev_put() and adjusts the position of ax25_addr_ax25dev() to fix reference cout leaks of ax25_dev. Fixes: d01ffb9e ("ax25: add refcount in ax25_dev to avoid UAF bugs") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220203150811.42256-1-duoming@zju.edu.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Yannick Vignon authored
Even if protected from preemption and interrupts, a small time window remains when the 2 register reads could return inconsistent values, each time the "seconds" register changes. This could lead to an about 1-second error in the reported time. Add logic to ensure the "seconds" and "nanoseconds" values are consistent. Fixes: 92ba6888 ("stmmac: add the support for PTP hw clock driver") Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20220203160025.750632-1-yannick.vignon@oss.nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2022-02-03 We've added 6 non-merge commits during the last 10 day(s) which contain a total of 7 files changed, 11 insertions(+), 236 deletions(-). The main changes are: 1) Fix BPF ringbuf to allocate its area with VM_MAP instead of VM_ALLOC flag which otherwise trips over KASAN, from Hou Tao. 2) Fix unresolved symbol warning in resolve_btfids due to LSM callback rename, from Alexei Starovoitov. 3) Fix a possible race in inc_misses_counter() when IRQ would trigger during counter update, from He Fengqing. 4) Fix tooling infra for cross-building with clang upon probing whether gcc provides the standard libraries, from Jean-Philippe Brucker. 5) Fix silent mode build for resolve_btfids, from Nathan Chancellor. 6) Drop unneeded and outdated lirc.h header copy from tooling infra as BPF does not require it anymore, from Sean Young. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: tools/resolve_btfids: Do not print any commands when building silently bpf: Use VM_MAP instead of VM_ALLOC for ringbuf tools: Ignore errors from `which' when searching a GCC toolchain tools headers UAPI: remove stale lirc.h bpf: Fix possible race in inc_misses_counter bpf: Fix renaming task_getsecid_subj->current_getsecid_subj. ==================== Link: https://lore.kernel.org/r/20220203155815.25689-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jedrzej Jagielski authored
There was a race condition in access to hw->aq.asq_last_status while adding and deleting MAC/VLAN filters causing incorrect error status to be printed as ERROR OK instead of the correct error. Change calls to i40e_aq_add_macvlan in i40e_aqc_add_filters and i40e_aq_remove_macvlan in i40e_aqc_del_filters to _v2 versions that return Admin Queue status on the stack to avoid race conditions in access to hw->aq.asq_last_status. Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Jedrzej Jagielski authored
ASQ send command functions are returning only i40e status codes yet some calling functions also need Admin Queue status that is stored in hw->aq.asq_last_status. Since hw object is stored on a heap it introduces a possibility for a race condition in access to hw if calling function is not fast enough to read hw->aq.asq_last_status before next send ASQ command is executed. Add new _v2 version of i40e_aq_add_macvlan that is using new _v2 versions of ASQ send command functions and returns the Admin Queue status on the stack. Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Jedrzej Jagielski authored
ASQ send command functions are returning only i40e status codes yet some calling functions also need Admin Queue status that is stored in hw->aq.asq_last_status. Since hw object is stored on a heap it introduces a possibility for a race condition in access to hw if calling function is not fast enough to read hw->aq.asq_last_status before next send ASQ command is executed. Add new versions of send ASQ command functions that return Admin Queue status on the stack to avoid race conditions in access to hw->aq.asq_last_status. Add new _v2 version of i40e_aq_remove_macvlan that is using new _v2 versions of ASQ send command functions and returns the Admin Queue status on the stack. Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Jedrzej Jagielski authored
Change functions: - i40e_aq_add_macvlan - i40e_aq_remove_macvlan - i40e_aq_delete_element - i40e_aq_add_vsi - i40e_aq_update_vsi_params to explicitly use i40e_asq_send_command_atomic(..., true) instead of i40e_asq_send_command, as they use mutexes and do some work in an atomic context. Without this change setting vlan via netdev will fail with call trace cased by bug "BUG: scheduling while atomic". Signed-off-by: Witold Fijalkowski <witoldx.fijalkowski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Jakub Kicinski authored
It's not used. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Joe Damato authored
After commit 1a557afc ("i40e: Refactor receive routine"), rx_stats.realloc_count is no longer being incremented, so remove it. The debugfs string was left, but hardcoded to 0. This is intended to prevent breaking any existing code / scripts that are parsing debugfs for i40e. Signed-off-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Mateusz Palczewski authored
After loading driver hw-tc-offload is enabled by default. Change the behaviour of driver to disable hw-tc-offload by default as this is the expected state. Additionally since this impacts ntuple feature state change the way of checking NETIF_F_HW_TC flag. Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Mickaël Salaün authored
The move of proc_dointvec_minmax_sysadmin() from kernel/sysctl.c to kernel/printk/sysctl.c introduced an incorrect __user attribute to the buffer argument. I spotted this change in [1] as well as the kernel test robot. Revert this change to please sparse: kernel/printk/sysctl.c:20:51: warning: incorrect type in argument 3 (different address spaces) kernel/printk/sysctl.c:20:51: expected void * kernel/printk/sysctl.c:20:51: got void [noderef] __user *buffer Fixes: faaa357a ("printk: move printk sysctl to printk/sysctl.c") Link: https://lore.kernel.org/r/20220104155024.48023-2-mic@digikod.net [1] Reported-by: kernel test robot <lkp@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Ogness <john.ogness@linutronix.de> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com> Link: https://lore.kernel.org/r/20220203145029.272640-1-mic@digikod.netSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Igor Pylypiv authored
This reverts commit 774a1221. We need to finish all async code before the module init sequence is done. In the reverted commit the PF_USED_ASYNC flag was added to mark a thread that called async_schedule(). Then the PF_USED_ASYNC flag was used to determine whether or not async_synchronize_full() needs to be invoked. This works when modprobe thread is calling async_schedule(), but it does not work if module dispatches init code to a worker thread which then calls async_schedule(). For example, PCI driver probing is invoked from a worker thread based on a node where device is attached: if (cpu < nr_cpu_ids) error = work_on_cpu(cpu, local_pci_probe, &ddi); else error = local_pci_probe(&ddi); We end up in a situation where a worker thread gets the PF_USED_ASYNC flag set instead of the modprobe thread. As a result, async_synchronize_full() is not invoked and modprobe completes without waiting for the async code to finish. The issue was discovered while loading the pm80xx driver: (scsi_mod.scan=async) modprobe pm80xx worker ... do_init_module() ... pci_call_probe() work_on_cpu(local_pci_probe) local_pci_probe() pm8001_pci_probe() scsi_scan_host() async_schedule() worker->flags |= PF_USED_ASYNC; ... < return from worker > ... if (current->flags & PF_USED_ASYNC) <--- false async_synchronize_full(); Commit 21c3c5d2 ("block: don't request module during elevator init") fixed the deadlock issue which the reverted commit 774a1221 ("module, async: async_synchronize_full() on module init iff async is used") tried to fix. Since commit 0fdff3ec ("async, kmod: warn on synchronous request_module() from async workers") synchronous module loading from async is not allowed. Given that the original deadlock issue is fixed and it is no longer allowed to call synchronous request_module() from async we can remove PF_USED_ASYNC flag to make module init consistently invoke async_synchronize_full() unless async module probe is requested. Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Reviewed-by: Changyuan Lyu <changyuanl@google.com> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup fixes from Tejun Heo: - Eric's fix for a long standing cgroup1 permission issue where it only checks for uid 0 instead of CAP which inadvertently allows unprivileged userns roots to modify release_agent userhelper - Fixes for the fallout from Waiman's recent cpuset work * 'for-5.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup/cpuset: Fix "suspicious RCU usage" lockdep warning cgroup-v1: Require capabilities to set release_agent cpuset: Fix the bug that subpart_cpus updated wrongly in update_cpumask() cgroup/cpuset: Make child cpusets restrict parents on v1 hierarchy
-
Jakub Kicinski authored
Alex Elder says: ==================== net: ipa: enable register retention With runtime power management in place, we sometimes need to issue a command to enable retention of IPA register values before power collapse. This requires a new Device Tree property, whose presence will also be used to signal that the command is required. ==================== Link: https://lore.kernel.org/r/20220201150205.468403-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Alex Elder authored
In some cases, the IPA hardware needs to request the always-on subsystem (AOSS) to coordinate with the IPA microcontroller to retain IPA register values at power collapse. This is done by issuing a QMP request to the AOSS microcontroller. A similar request ondoes that request. We must get and hold the "QMP" handle early, because we might get back EPROBE_DEFER for that. But the actual request should be sent while we know the IPA clock is active, and when we know the microcontroller is operational. Fixes: 1aac309d ("net: ipa: use autosuspend") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Alex Elder authored
For some systems, the IPA driver must make a request to ensure that its registers are retained across power collapse of the IPA hardware. On such systems, we'll use the existence of the "qcom,qmp" property as a signal that this request is required. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Waiman Long authored
It was found that a "suspicious RCU usage" lockdep warning was issued with the rcu_read_lock() call in update_sibling_cpumasks(). It is because the update_cpumasks_hier() function may sleep. So we have to release the RCU lock, call update_cpumasks_hier() and reacquire it afterward. Also add a percpu_rwsem_assert_held() in update_sibling_cpumasks() instead of stating that in the comment. Fixes: 4716909c ("cpuset: Track cpusets that use parent's effective_cpus") Signed-off-by: Waiman Long <longman@redhat.com> Tested-by: Phil Auld <pauld@redhat.com> Reviewed-by: Phil Auld <pauld@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
-
Nathan Chancellor authored
When building with 'make -s', there is some output from resolve_btfids: $ make -sj"$(nproc)" oldconfig prepare MKDIR .../tools/bpf/resolve_btfids/libbpf/ MKDIR .../tools/bpf/resolve_btfids//libsubcmd LINK resolve_btfids Silent mode means that no information should be emitted about what is currently being done. Use the $(silent) variable from Makefile.include to avoid defining the msg macro so that there is no information printed. Fixes: fbbb68de ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220201212503.731732-1-nathan@kernel.org
-
John Hubbard authored
This reverts commit 54d516b1 That commit did a refactoring that effectively combined fast and slow gup paths (again). And that was again incorrect, for two reasons: a) Fast gup and slow gup get reference counts on pages in different ways and with different goals: see Linus' writeup in commit cd1adf1b ("Revert "mm/gup: remove try_get_page(), call try_get_compound_head() directly""), and b) try_grab_compound_head() also has a specific check for "FOLL_LONGTERM && !is_pinned(page)", that assumes that the caller can fall back to slow gup. This resulted in new failures, as recently report by Will McVicker [1]. But (a) has problems too, even though they may not have been reported yet. So just revert this. Link: https://lore.kernel.org/r/20220131203504.3458775-1-willmcvicker@google.com [1] Fixes: 54d516b1 ("mm/gup: small refactoring: simplify try_grab_page()") Reported-and-tested-by: Will McVicker <willmcvicker@google.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Minchan Kim <minchan@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: stable@vger.kernel.org # 5.15 Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Thomas Bogendoerfer: - fix missed change for PTR->PTR_WD conversion - kernel-doc fixes * tag 'mips-fixes-5.17_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: KVM: fix vz.c kernel-doc notation MIPS: octeon: Fix missed PTR->PTR_WD conversion
-
David S. Miller authored
Russell King says: ==================== net: dsa: mv88e6xxx: convert to phylink_generic_validate() The overall objective of this series is to convert the mv88e6xxx DSA driver to use phylink_generic_validate(). Patch 1 adds a new helper mv88e6352_g2_scratch_port_has_serdes() which indicates whether an 88e6352 port has a serdes associated with it. This is necessary as ports 4 and 5 will normally be in automedia mode, where the CMODE field in the port status register will change e.g. between 15 (internal PHY) and 9 (1000base-X) depending on whether the serdes has link. The existing code caches the cmode field, and depending whether the serdes has link at probe time, determines whether we allow things such as the serdes statistics to be accessed. This means if the link isn't up at probe time, the serdes is essentially unavailable. Patch 1 addresses this by reading the pin configuration to find out whether the serdes is attached to port 4 or port 5. Patch 2 is a joint effort between myself and Marek Behún, adding the supported interfaces and MAC capabilities to all mv88e6xxx supported switch devices. This is slightly more restrictive than the original code as we didn't used to care too much about the interface mode, but with this we do - which is why we must know if there's a serdes associated now. Patch 3 switches mv88e6xxx to use the generic validation by removing the initialisation of the phylink_validate pointer in the dsa_ops struct. Patch 4 updates the statistics code to use the new helper in patch 1, so the serdes statistics are available even if the link was down at driver probe time. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-