- 03 Jun, 2015 1 commit
-
-
Tej Parkash authored
Fix the firmware assert, during target logout in case driver received FIN from target before waiting for asyncronous response. Signed-off-by:
Tej Parkash <tej.parkash@qlogic.com> Signed-off-by:
Nilesh Javali <nilesh.javali@qlogic.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Odin.com>
-
- 02 Jun, 2015 14 commits
-
-
Yaniv Gardi authored
Newer revisions of QUALCOMM Technologies UFS host controller may not advertise the correct version information in UFS HCI VER register. To handle this, enable UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION to let UFS standard host controller driver call into vendor specific operation to get right UFS HCI VER register value. Signed-off-by:
Yaniv Gardi <ygardi@codeaurora.org> Reviewed-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Yaniv Gardi authored
Some host controller hardware controllers may not advertise correct version in UFS HCI VER register. To workaround this, add new quirk and call the host controller hardware vendor specific callback to get the correct UFS HCI version register value. Signed-off-by:
-
Yaniv Gardi authored
Current version of host controller on QUALCOMM Technologies requires this quirk to be enabled, as DME commands to device must be sent only in AUTO mode (SLOW AUTO or FAST AUTO). Signed-off-by:
-
Yaniv Gardi authored
Some UFS host controllers may only allow accessing the peer DME attribute in AUTO mode (FAST AUTO or SLOW AUTO) hence we had added a quirk for switching to AUTO power mode before accessing the peer DME attribute. Signed-off-by:
-
Yaniv Gardi authored
With the G3 UFS devices, changing gear into HS is failing in UFS host controllers of version 0x2. The quirk solves the problem of changing gear into HS by enabling the attribute that specifies whether or not the inbound Link supports unterminated line in HS mode. Signed-off-by:
-
Yaniv Gardi authored
The attribute PA_RXHSUNTERMCAP specifies whether or not the inbound Link supports unterminated line in HS mode. enabling this attribute to 1 fixes moving to HS gear. Signed-off-by:
-
Yaniv Gardi authored
LCC (Line Control Command) are being used for communication between UFS host and UFS device. But UFS host controller on QUALCOMM Technologies have an issue with issuing the LCC commands to UFS device and hence this quirk is enabled in order to to disable LCC from the host side. Signed-off-by:
-
Yaniv Gardi authored
LCC (Line Control Command) are being used for communication between UFS host and UFS device. New commercial UFS devices don't have the issues with LCC processing but UFS host controller might still have the issue with LCC processing, hence, added a routine to disable TX LCC on the device. Signed-off-by:
-
Yaniv Gardi authored
Current versions of UFS host controllers on QUALCOMM Technologies have interrupt aggregation logic broken. Interrupt aggregation may not work if both threshold count and timeout is enabled. Hence disable interrupt aggregation by enabling UFSHCD_QUIRK_BROKEN_INTR_AGGR quirk until its fixed in the newer UFS host controller revisions. Signed-off-by:
-
Yaniv Gardi authored
UFS HCI (Host Controller Interface) allows the transfer requests interrupts to be aggregated to generate the single interrupt but this can impact the performance. Hence introduce the capability which gives choice to use the interrupt aggregation capability or not. By default interrupt aggregation capability is kept disabled. This change also introduces a quirk for broken interrupt aggregation feature, as in some UFS controllers, this feature may not work. Signed-off-by:
-
Brian King authored
Increase the default init stage change timeout from 15 seconds to 30 seconds. This resolves issues we have seen with some adapters not transitioning to the first init stage within 15 seconds, which results in adapter initialization failures. Cc: <stable@vger.kernel.org> Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Seymour, Shane M authored
This patch implements tape statistics in the st module via sysfs. Current no statistics are available for tape I/O and there is no easy way to reuse the block layer statistics for tape as tape is a character device and does not have perform I/O in sector sized chunks (the size of the data written to tape can change). For tapes we also need extra stats related to things like tape movement (via other I/O). There have been multiple end users requesting statistics including AT&T (and some HP customers who have not given permission to be named). It is impossible for them to investigate any issues related to tape performance in a non-invasive way. [jejb: eliminate PRId64] Signed-off-by:
Shane Seymour <shane.seymour@hp.com> Tested-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Bart Van Assche authored
Only include SCSI initiator header files in target code that needs these header files, namely the SCSI pass-through code and the tcm_loop driver. Change SCSI_SENSE_BUFFERSIZE into TRANSPORT_SENSE_BUFFER in target code because the former is intended for initiator code and the latter for target code. With this patch the only initiator include directives in target code that remain are as follows: $ git grep -nHE 'include .scsi/(scsi.h|scsi_host.h|scsi_device.h|scsi_cmnd.h)' drivers/target drivers/infiniband/ulp/{isert,srpt} drivers/usb/gadget/legacy/tcm_*.[ch] drivers/{vhost,xen} include/{target,trace/events/target.h} drivers/target/loopback/tcm_loop.c:29:#include <scsi/scsi.h> drivers/target/loopback/tcm_loop.c:31:#include <scsi/scsi_host.h> drivers/target/loopback/tcm_loop.c:32:#include <scsi/scsi_device.h> drivers/target/loopback/tcm_loop.c:33:#include <scsi/scsi_cmnd.h> drivers/target/target_core_pscsi.c:39:#include <scsi/scsi_device.h> drivers/target/target_core_pscsi.c:40:#include <scsi/scsi_host.h> drivers/xen/xen-scsiback.c:52:#include <scsi/scsi_host.h> /* SG_ALL */ Signed-off-by:Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
-
Bart Van Assche authored
Correct the comment above the definition of TCM_MAX_COMMAND_SIZE. A quote from Christoph: There aren't any legacy issues, we just decided to handle > 16 byte CDBs in the slow path. Signed-off-by:Hannes Reinecke <hare@suse.de> Signed-off-by:
-
- 01 Jun, 2015 7 commits
-
-
Bart Van Assche authored
Move the functions that are used by both the initiator and target subsystems into scsi_common.c/.h. This change will allow to remove the initiator SCSI header include directives from most SCSI target source files in a later patch. Signed-off-by:
-
Bart Van Assche authored
Move the constants that are used by both initiator and target drivers into the new header file <scsi/scsi_proto.h>. This change will allow to remove the initiator SCSI header include directives from most SCSI target source files in a later patch. Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d98 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by:
Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by:
Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Hannes Reinecke authored
'0' is now used as the default cmd_per_lun value, so there's no need to explicitly set it to '1' in the host template. Signed-off-by:
-
Don Brace authored
update driver version Reviewed-by:
Scott Teel <scott.teel@pmcs.com> Reviewed-by:
Kevin Barnett <kevin.barnett@pmcs.com> Reviewed-by:
Don Brace <don.brace@pmcs.com> Reviewed-by:
-
Don Brace authored
add in support for latest PMC controller Reviewed-by:
-
Webb Scales authored
Synchronize completion the reset with completion of outstanding commands Extending the newly-added synchronous abort functionality, now also synchronize resets with the completion of outstanding commands. Rename the wait queue to reflect the fact that it's being used for both types of waits. Also, don't complete commands which are terminated due to a reset operation. fix for controller lockup during reset Reviewed-by:
Webb Scales <webbnh@hp.com> Signed-off-by:
-
- 31 May, 2015 18 commits
-
-
Robert Elliott authored
If hpsa_wait_for_board_state fails, hpsa_kdump_soft_reset should propagate its return value (e.g., -ENODEV) rather than just returning -1. Reviewed-by:
Robert Elliott <elliott@hp.com> Signed-off-by:
-
Robert Elliott authored
Rather than numbering the hpsa controllers with an incrementing 0..n value (e.g., that shows up in /proc/interrupts), use the scsi midlayer host_no (e.g. matching /sys/class/scsi_host/hostNN). Reviewed-by:
-
Webb Scales authored
Rework slave allocation: - separate the tagging support setup from the hostdata setup - make the hostdata setup act consistently when the lookup fails - make the hostdata setup act consistently when the device is not added - set up the queue depth consistently across these scenarios - if the block layer mq support is not available, explicitly enable and activate the SCSI layer tcq support (and do this at allocation-time so that the tags will be available for INQUIRY commands) Tweak slave configuration so that devices which are masked are also not attached. Reviewed-by: -
Robert Elliott authored
Add the interrupt number to the interrupt names that appear in /proc/interrupts, so they are unique Also, delete the IRQ and DAC prints. Other parts of the kernel already print the IRQ assignments, and dual-address-cycle support has not been interesting since the parallel PCI bus went from 32 to 64 bits wide. Reviewed-by:
-
Robert Elliott authored
Don't create the resubmit workqueue in hpsa_init_one until everything else is ready to use, so everything can be freed in reverse order of when they were allocated without risking freeing things while workqueue items are still active. Destroy the workqueue in the right order in hpsa_undo_allocations_after_kdump_soft_reset too. Reviewed-by:
-
Robert Elliott authored
If registering the special interrupt handlers in hpsa_init_one before a soft reset fails, the error exit needs to deallocate everything that was allocated before. Reviewed-by:
-
Robert Elliott authored
In hpsa_undo_allocations_after_kdump_soft_reset, the things allocated in hpsa_init_one step 2 - h->resubmit_wq and h->lockup_detected need to be freed, in the right order. Reviewed-by:
-
Robert Elliott authored
If try_soft_reset fails to re-allocate irqs, the error exit starts with free_irq calls, which generate kernel WARN messages since they were already freed a few lines earlier. Jump to the next exit label to skip the free_irq calls. Reviewed-by:
-
Robert Elliott authored
Despite the fact that PCI devices are enabled in this order: 1. pci_enable_device 2. pci_request_regions Documentation/PCI/pci.txt specifies that they be undone in this order 1. pci_disable_device 2. pci_release_regions Tested by injecting error in the call to pci_enable_device in hpsa_init_one -> hpsa_pci_init: [ 9.095001] hpsa 0000:04:00.0: failed to enable PCI device [ 9.095005] hpsa: probe of 0000:04:00.0 failed with error -22 (-22 is -EINVAL) and then in the call pci_request_regions: [ 9.178623] hpsa 0000:04:00.0: failed to obtain PCI resources [ 9.178671] hpsa: probe of 0000:04:00.0 failed with error -16 (-16 is -EBUSY) and then by adding reset_devices to the kernel command line and inject errors into the two calls to pci_enable_device and the call to pci_request_regions in hpsa_init_one -> hpsa_init_reset_devices. (inject on 6th call, 1st to hpsa2) [ 62.413750] hpsa 0000:04:00.0: Failed to enable PCI device (inject on 7th call, 2nd to hpsa2) [ 62.807571] hpsa 0000:04:00.0: failed to enable device. (inject on 8th call, 3rd to hpsa2) [ 62.697198] hpsa 0000:04:00.0: failed to obtain PCI resources [ 62.697234] hpsa: probe of 0000:04:00.0 failed with error -16 The reset_devices path calls return -ENODEV on failure rather than passing the result, which apparently doesn't cause the pci driver to print anything. Reviewed-by: -
Webb Scales authored
Divide the loop in hpsa_scatter_gather() into two, one for the initial SG list and a second one for the chained list, if any. This allows the conditional check which resets the indicies for the chained list to be performed outside the loop instead of being done on every iteration inside the loop. Reviewed-by:
-
Webb Scales authored
Factor out the code which sends the TEST_UNIT_READY from wait_for_device_to_become_ready() into its own function. Move the code which waits for the TEST_UNIT_READY from wait_for_device_to_become_ready() into its own function. If a logical drive has failed, resetting it will ensure outstanding commands are completed, but polling it with TURs after the reset will not work because the TURs will never report good status. So successful TUR should not be a condition of success for the device reset error handler. Reviewed-by:
-
Webb Scales authored
Don't return from the abort request until the target command is complete. Mark outstanding commands which have a pending abort, and do not send them to the host if we can avoid it. If the current command has been aborted, do not call the SCSI command completion routine from the I/O path: when the abort returns successfully, the SCSI mid-layer will handle the completion implicitly. The following race was possible in theory. 1. LLD is requested to abort a scsi command 2. scsi command completes 3. The struct CommandList associated with 2 is made available. 4. new io request to LLD to another LUN re-uses struct CommandList 5. abort handler follows scsi_cmnd->host_scribble and finds struct CommandList and tries to aborts it. Now we have aborted the wrong command. Fix by resetting the scsi_cmd field of struct CommandList upon completion and making the abort handler check that the scsi_cmd pointer in the CommadList struct matches the scsi_cmnd that it has been asked to abort. Reviewed-by:
-
Webb Scales authored
cleanup command completions Reviewed-by:
-
Stephen Cameron authored
add support for tmf when in ioaccel2 mode Reviewed-by:
Joe Handzik <joseph.t.handzik@hp.com> Signed-off-by:
-
Robert Elliott authored
The SCSI midlayer already prints more detail about completions, and has logging level options to filter them if not wanted. These just slow down the system if a lot of errors occur, stressing error handling even more. Reviewed-by:
-
Robert Elliott authored
report more useful information on aborts Reviewed-by:
-
Robert Elliott authored
Improve initialization error handling in hpsa_init_one Clean up style and indent issues Rename functions for consistency Improve error messaging on allocations Fix return status from hpsa_put_ctlr_into_performant_mode Correct free order in hpsa_init_one using new function hpsa_free_performant_mode Prevent inadvertent use of null pointers by nulling out the parent structures and zeroing out associated size variables. Reviewed-by:
-
Robert Elliott authored
correct return codes for error conditions Reviewed-by:
-
