- 12 Jan, 2018 8 commits
-
-
Fuyun Liang authored
In the hardware, the coalesce configurable registers include GL0, GL1, GL2. In the driver, the TX queues use the register GL1 and the RX queues use the register GL0. This function initializes the configuration of the interrupt coalescing, but does not distinguish between the TX direction and the RX direction. It will cause some confusion. This patch refactors the function to initialize the TX GL and the RX GL separately. And the initialization of related variables also is added to this patch. Signed-off-by:
Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fuyun Liang authored
This patch adds ethtool_ops.set_coalesce support to PF. Signed-off-by:
Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fuyun Liang authored
This patch adds ethtool_ops.get_coalesce support to PF. Whilst our hardware supports per queue values, external interfaces support only a single shared value. As such we use the values for queue 0. Signed-off-by:
Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Peng Li authored
Only main PF can config TSO MSS length according to hardware. This patch removes TSO config command from VF driver. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Peng Li authored
This patch supports the ethtool's get_channels() for VF. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
BPF alignment tests got a conflict because the registers are output as Rn_w instead of just Rn in net-next, and in net a fixup for a testcase prohibits logical operations on pointers before using them. Also, we should attempt to patch BPF call args if JIT always on is enabled. Instead, if we fail to JIT the subprogs we should pass an error back up and fail immediately. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fixes from Ilya Dryomov: "Two rbd fixes for 4.12 and 4.2 issues respectively, marked for stable" * tag 'ceph-for-4.15-rc8' of git://github.com/ceph/ceph-client: rbd: set max_segments to USHRT_MAX rbd: reacquire lock should update lock owner client id
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fix from Linus Walleij: "Fix a raw vs elaborate GPIO descriptor bug introduced by yours truly" * tag 'gpio-v4.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()
-
- 11 Jan, 2018 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-01-11 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Various BPF related improvements and fixes to nfp driver: i) do not register XDP RXQ structure to control queues, ii) round up program stack size to word size for nfp, iii) restrict MTU changes when BPF offload is active, iv) add more fully featured relocation support to JIT, v) add support for signed compare instructions to the nfp JIT, vi) export and reuse verfier log routine for nfp, and many more, from Jakub, Quentin and Nic. 2) Fix a syzkaller reported GPF in BPF's copy_verifier_state() when we hit kmalloc failure path, from Alexei. 3) Add two follow-up fixes for the recent XDP RXQ series: i) kvzalloc() allocated memory was only kfree()'ed, and ii) fix a memory leak where RX queue was not freed in netif_free_rx_queues(), from Jakub. 4) Add a sample for transferring XDP meta data into the skb, here it is used for setting skb->mark with the buffer from XDP, from Jesper. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2018-01-11 Here's likely the last bluetooth-next pull request for the 4.16 kernel. - Added support for Bluetooth on 2015+ MacBook (Pro) - Fix to QCA Rome suspend/resume handling - Two new QCA_ROME USB IDs in btusb - A few other minor fixes Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference a bit later in the code. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Fix to return error code -ENODEV from the of_phy_connect() error handling case instead of 0, as done elsewhere in this function. Fixes: 533dd11a ("net: socionext: Add Synquacer NetSec driver") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
I ran into a randconfig build failure: drivers/net/ethernet/socionext/netsec.c: In function 'netsec_probe': drivers/net/ethernet/socionext/netsec.c:1583:17: error: implicit declaration of function 'devm_ioremap'; did you mean 'ioremap'? [-Werror=implicit-function-declaration] Including linux/io.h directly fixes this. Fixes: 533dd11a ("net: socionext: Add Synquacer NetSec driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2018-01-10 This series contains updates to i40e and i40evf only. Alice adds the displaying of priority xon/xoff packet stats, since we were already keeping track of them. Based on the recent changes, bump the driver versions. Jake changes how the driver determines whether or not the device is currently up to resolve the possible issue of freeing data structures and other memory before they have been fully allocated. Refactored the driver to simplify the locking behavior and to consistently use spinlocks instead of an overloaded bit lock to protect MAC and filter lists. Created a helper function which can convert the AdminQ link speed definition into a virtchnl definition. Colin Ian King cleans up a redundant variable initialization. Alex cleans up the driver to stop clearing the pending bit array for each vector manually, since it is prone to dropping an interrupt and based on the hardware specs, the pending bit array will be cleared automatically in MSI-X mode. Cleaned up flags for promiscuous mode to resolve an issue where enabling & disabling promiscuous mode on a VF would leave us in a high polling rate for the adminq task. Cleaned up code that was prone to race issues. Jingjing renames pipeline personalization profile (ppp) to dynamic device personalization (ddp) because it was being confused with the well known point to point protocol. Also removed checks for "track_id" being zero, since it is valid for it to be zero for profiles that do not have any 'write' commands. v2: cleaned up commit message for patch 12 based on feedback from Sergei Shtylyov and Alex Duyck v3: dropped patch 15 from the original series while Mariusz Stachura works on the changes that Jakub Kicinski has suggested ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nathan Fontenot authored
Initiating a kdump via the command line can cause a pending interrupt to be handled by the ibmvnic driver when initializing the sub-CRQ irqs during driver initialization. NIP [d000000000ca34f0] ibmvnic_interrupt_rx+0x40/0xd0 [ibmvnic] LR [c000000008132ef0] __handle_irq_event_percpu+0xa0/0x2f0 Call Trace: [c000000047fcfde0] [c000000008132ef0] __handle_irq_event_percpu+0xa0/0x2f0 [c000000047fcfea0] [c00000000813317c] handle_irq_event_percpu+0x3c/0x90 [c000000047fcfee0] [c00000000813323c] handle_irq_event+0x6c/0xd0 [c000000047fcff10] [c0000000081385e0] handle_fasteoi_irq+0xf0/0x250 [c000000047fcff40] [c0000000081320a0] generic_handle_irq+0x50/0x80 [c000000047fcff60] [c000000008014984] __do_irq+0x84/0x1d0 [c000000047fcff90] [c000000008027564] call_do_irq+0x14/0x24 [c00000003c92af00] [c000000008014b70] do_IRQ+0xa0/0x120 [c00000003c92af50] [c000000008002594] hardware_interrupt_common+0x114/0x180 Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ganesh Goudar authored
Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ganesh Goudar authored
add changes to t4_eth_xmit to enable vxlan segmentation offload support. Original work by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ganesh Goudar authored
Implement ndo_udp_tunnel_add and ndo_udp_tunnel_del to support vxlan tunnelling. Original work by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ganesh Goudar authored
Add data structures and macros to be used in vxlan offload. Original work by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs regression fix from Al Viro/ Fix a leak in socket() introduced by commit 8e1611e2 ("make sock_alloc_file() do sock_release() on failures"). * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Fix a leak in socket(2) when we fail to allocate a file descriptor.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) BPF speculation prevention and BPF_JIT_ALWAYS_ON, from Alexei Starovoitov. 2) Revert dev_get_random_name() changes as adjust the error code returns seen by userspace definitely breaks stuff. 3) Fix TX DMA map/unmap on older iwlwifi devices, from Emmanuel Grumbach. 4) From wrong AF family when requesting sock diag modules, from Andrii Vladyka. 5) Don't add new ipv6 routes attached to the null_entry, from Wei Wang. 6) Some SCTP sockopt length fixes from Marcelo Ricardo Leitner. 7) Don't leak when removing VLAN ID 0, from Cong Wang. 8) Hey there's a potential leak in ipv6_make_skb() too, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) ipv6: sr: fix TLVs not being copied using setsockopt ipv6: fix possible mem leaks in ipv6_make_skb() mlxsw: spectrum_qdisc: Don't use variable array in mlxsw_sp_tclass_congestion_enable mlxsw: pci: Wait after reset before accessing HW nfp: always unmask aux interrupts at init 8021q: fix a memory leak for VLAN 0 device of_mdio: avoid MDIO bus removal when a PHY is missing caif_usb: use strlcpy() instead of strncpy() doc: clarification about setting SO_ZEROCOPY net: gianfar_ptp: move set_fipers() to spinlock protecting area sctp: make use of pre-calculated len sctp: add a ceiling to optlen in some sockopts sctp: GFP_ATOMIC is not needed in sctp_setsockopt_events bpf: introduce BPF_JIT_ALWAYS_ON config bpf: avoid false sharing of map refcount with max_entries ipv6: remove null_entry before adding default route SolutionEngine771x: add Ether TSU resource SolutionEngine771x: fix Ether platform data docs-rst: networking: wire up msg_zerocopy net: ipv4: emulate READ_ONCE() on ->hdrincl bit-field in raw_sendmsg() ...
-
Jesper Dangaard Brouer authored
Creating a bpf sample that shows howto use the XDP 'data_meta' infrastructure, created by Daniel Borkmann. Very few drivers support this feature, but I wanted a functional sample to begin with, when working on adding driver support. XDP data_meta is about creating a communication channel between BPF programs. This can be XDP tail-progs, but also other SKB based BPF hooks, like in this case the TC clsact hook. In this sample I show that XDP can store info named "mark", and TC/clsact chooses to use this info and store it into the skb->mark. It is a bit annoying that XDP and TC samples uses different tools/libs when attaching their BPF hooks. As the XDP and TC programs need to cooperate and agree on a struct-layout, it is best/easiest if the two programs can be contained within the same BPF restricted-C file. As the bpf-loader, I choose to not use bpf_load.c (or libbpf), but instead wrote a bash shell scripted named xdp2skb_meta.sh, which demonstrate howto use the iproute cmdline tools 'tc' and 'ip' for loading BPF programs. To make it easy for first time users, the shell script have command line parsing, and support --verbose and --dry-run mode, if you just want to see/learn the tc+ip command syntax: # ./xdp2skb_meta.sh --dev ixgbe2 --dry-run # Dry-run mode: enable VERBOSE and don't call TC+IP tc qdisc del dev ixgbe2 clsact tc qdisc add dev ixgbe2 clsact tc filter add dev ixgbe2 ingress prio 1 handle 1 bpf da obj ./xdp2skb_meta_kern.o sec tc_mark # Flush XDP on device: ixgbe2 ip link set dev ixgbe2 xdp off ip link set dev ixgbe2 xdp obj ./xdp2skb_meta_kern.o sec xdp_mark Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net>
-
- 10 Jan, 2018 18 commits
-
-
Al Viro authored
Got broken by "make sock_alloc_file() do sock_release() on failures" - cleanup after sock_map_fd() failure got pulled all the way into sock_alloc_file(), but it used to serve the case when sock_map_fd() failed *before* getting to sock_alloc_file() as well, and that got lost. Trivial to fix, fortunately. Fixes: 8e1611e2 (make sock_alloc_file() do sock_release() on failures) Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David S. Miller authored
Edward Cree says: ==================== sfc: support 25G configuration with ethtool Adds support for advertise bits beyond the 32-bit legacy masks, and plumbs in translation of the new 25/50/100G bits to/from MCDI. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edward Cree authored
Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edward Cree authored
Store and handle ethtool link mode masks within the driver instead of just a single u32. However, quite a significant amount of existing code wants to manipulate the masks directly, and thus now uses the first unsigned long (i.e. mask[0]) as though it were a legacy u32 mask. This is ok because all the bits that code is interested in are in the first 32 bits of the mask; but it might be a good idea to change them in future to use the proper bitmap API. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edward Cree authored
Only handles direct speed setting, not autoneg, because the driver is still trying to pretend it uses the legacy ethtool API which doesn't have advertised/supported bits for 25/50/100G. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw qdisc refactoring This patchset refactors the qdisc handling in mlxsw driver in order to make it more object oriented like. It helps readability, laying the groundwork for the offloading of additional qdiscs by the driver This patchset also makes the qdiscs statistics more generic. Patch 1 moves the qdiscs declaration to the spectrum_qdisc.c Patches 2-3 clean the offloaded stats requests. Patch 2 changes the RED generic stats struct to be sharable by other offloaded qdiscs. Patch 3 changes the xstats request to be like the stats. Note that these patches are outside the driver scope. Patches 4-5 clean the statistics related functions and structs within the driver. Patches 6-7 decrease the need for the same parameters to be sent to many functions. Patches 8-11 create a functions pointers struct, to make the qdiscs handling more object oriented like. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nogah Frankel authored
If a qdisc is being replaced by another qdisc of the same type, it can simply override over its configuration. However, if it replaces a qdisc of another type, it needs to be removed before setting the new qdisc. Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Reviewed-by:
Yuval Mintz <yuvalm@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nogah Frankel authored
Create a generic qdisc replace function. For that goal, add three functions to the qdisc ops struct: * check_params: Checks if the given parameters are offloadable. * replace: Offload the given parameters. * clean_stats: clean the qdisc stats for the offloaded qdisc. integrate RED offloading into using the new internal replace API. Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Reviewed-by:
Yuval Mintz <yuvalm@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nogah Frankel authored
Add a destroy function to the qdiscs ops struct. Create a generic qdisc destroy function, that clears the qdisc metadata as well as calling the specific qdisc destroy function. Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Reviewed-by:
Yuval Mintz <yuvalm@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nogah Frankel authored
Qdisc struct have the Qdisc_class_ops struct. This patch introduces the similar ops struct for the mlxsw_sp_qdisc_ops struct. It allows better readability as well as code reusability for the common parts of some functions like destroy. The first operations to be added are the statistics getters. Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Reviewed-by:
Yuval Mintz <yuvalm@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nogah Frankel authored
Every qdisc op gets the qdisc handle ID as well as its location. Each one of them, beside replace, checks if the handle doesn't match the qdisc in the given location, and if so, it returns without running the actual op. Unite these checks to one comparison function and avoid sending the handle id to these ops. Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Reviewed-by:
Yuval Mintz <yuvalm@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nogah Frankel authored
Tclass number is needed for most of the operations related to the qdisc in the driver. Create a field for it in the mlxsw_sp_qdisc instead of passing it to every function as parameter. Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Reviewed-by:
Yuval Mintz <yuvalm@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nogah Frankel authored
Improve readability by changing the clean stats function to handle only RED. Qdiscs that will be offloaded in the future will have a clean stats function of their own. Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Reviewed-by:
Yuval Mintz <yuvalm@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nogah Frankel authored
Clean RED offloaded stats and make them more generic by breaking the generic qdisc stats to a struct of their own. Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Reviewed-by:
Yuval Mintz <yuvalm@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nogah Frankel authored
Change the value of the xstats requested from the driver for offloaded RED to be incremental, like the normal stats. It increases consistency - if a qdisc stops being offloaded its xstats don't change. Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Reviewed-by:
Yuval Mintz <yuvalm@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nogah Frankel authored
Change the name of the stats struct to be generic, so it could be used for other qdisc offload, that will be added in the next patches. Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Reviewed-by:
Yuval Mintz <yuvalm@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nogah Frankel authored
Move all the qdisc related data from the spectrum.h to spectrum_qdisc.c. Create an init and fini functions for the qdiscs. Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Reviewed-by:
Yuval Mintz <yuvalm@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-