- 20 Dec, 2017 40 commits
-
-
Philipp Zabel authored
[ Upstream commit a3350f9c ] The pcf8563_clkout_recalc_rate function erroneously ignores the frequency index read from the CLKO register and always returns 32768 Hz. Fixes: a39a6405 ("rtc: pcf8563: add CLKOUT to common clock framework") Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christophe JAILLET authored
[ Upstream commit 8cae353e ] 'ret' is known to be 0 at this point. In case of memory allocation error in 'framebuffer_alloc()', return -ENOMEM instead. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 451f1306 ] We should go through the error handling code instead of returning -ENOMEM directly. Signed-off-by:
-
Ladislav Michl authored
[ Upstream commit c9876947 ] While usb_control_msg function expects timeout in miliseconds, a value of HZ is used. Replace it with USB_CTRL_GET_TIMEOUT and also fix error message which looks like: udlfb: Read EDID byte 78 failed err ffffff92 as error is either negative errno or number of bytes transferred use %d format specifier. Returned EDID is in second byte, so return error when less than two bytes are received. Fixes: 18dffdf8 ("staging: udlfb: enhance EDID and mode handling support") Signed-off-by:
Ladislav Michl <ladis@linux-mips.org> Cc: Bernie Thompson <bernie@plugable.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit ac831a37 ] Dan's static analysis says: drivers/video/fbdev/controlfb.c:560 control_setup() error: buffer overflow 'control_mac_modes' 20 <= 21 Indeed, control_mac_modes[] has only 20 elements, while VMODE_MAX is 22, which may lead to an out of bounds read when parsing vmode commandline options. The bug was introduced in v2.4.5.6, when 2 new modes were added to macmodes.h, but control_mac_modes[] wasn't updated: https://kernel.opensuse.org/cgit/kernel/diff/include/video/macmodes.h?h=v2.5.2&id=29f279c764808560eaceb88fef36cbc35c529aad Augment control_mac_modes[] with the two new video modes to fix this. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Robert Stonehouse authored
[ Upstream commit cbad52e9 ] Fixes: 535a6177 ("sfc: suppress handled MCDI failures when changing the MAC address") Signed-off-by:
Bert Kenward <bkenward@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Mike Christie authored
[ Upstream commit 760bf578 ] This fixes the following races: 1. core_alua_do_transition_tg_pt could have read tg_pt_gp_alua_access_state and gone into this if chunk: if (!explicit && atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) == ALUA_ACCESS_STATE_TRANSITION) { and then core_alua_do_transition_tg_pt_work could update the state. core_alua_do_transition_tg_pt would then only set tg_pt_gp_alua_pending_state and the tg_pt_gp_alua_access_state would not get updated with the second calls state. 2. core_alua_do_transition_tg_pt could be setting tg_pt_gp_transition_complete while the tg_pt_gp_transition_work is already completing. core_alua_do_transition_tg_pt then waits on the completion that will never be called. To handle these issues, we just call flush_work which will return when core_alua_do_transition_tg_pt_work has completed so there is no need to do the complete/wait. And, if core_alua_do_transition_tg_pt_work was running, instead of trying to sneak in the state change, we just schedule up another core_alua_do_transition_tg_pt_work call. Note that this does not handle a possible race where there are multiple threads call core_alua_do_transition_tg_pt at the same time. I think we need a mutex in target_tg_pt_gp_alua_access_state_store. Signed-off-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Mike Christie authored
[ Upstream commit d7175373 ] The implicit transition time tells initiators the min time to wait before timing out a transition. We currently schedule the transition to occur in tg_pt_gp_implicit_trans_secs seconds so there is no room for delays. If core_alua_do_transition_tg_pt_work->core_alua_update_tpg_primary_metadata needs to write out info to a remote file, then the initiator can easily time out the operation. Signed-off-by:
-
Mike Christie authored
[ Upstream commit 207ee841 ] If tcmu-runner is processing a STPG and needs to change the kernel's ALUA state then we cannot use the same work queue for task management requests and ALUA transitions, because we could deadlock. The problem occurs when a STPG times out before tcmu-runner is able to call into target_tg_pt_gp_alua_access_state_store-> core_alua_do_port_transition -> core_alua_do_transition_tg_pt -> queue_work. In this case, the tmr is on the work queue waiting for the STPG to complete, but the STPG transition is now queued behind the waiting tmr. Note: This bug will also be fixed by this patch: http://www.spinics.net/lists/target-devel/msg14560.html which switches the tmr code to use the system workqueues. For both, I am not sure if we need a dedicated workqueue since it is not a performance path and I do not think we need WQ_MEM_RECLAIM to make forward progress to free up memory like the block layer does. Signed-off-by:
-
Zygo Blaxell authored
[ Upstream commit e1699d2d ] This is a story about 4 distinct (and very old) btrfs bugs. Commit c8b97818 ("Btrfs: Add zlib compression support") added three data corruption bugs for inline extents (bugs #1-3). Commit 93c82d57 ("Btrfs: zero page past end of inline file items") fixed bug #1: uncompressed inline extents followed by a hole and more extents could get non-zero data in the hole as they were read. The fix was to add a memset in btrfs_get_extent to zero out the hole. Commit 166ae5a4 ("btrfs: fix inline compressed read err corruption") fixed bug #2: compressed inline extents which contained non-zero bytes might be replaced with zero bytes in some cases. This patch removed an unhelpful memset from uncompress_inline, but the case where memset is required was missed. There is also a memset in the decompression code, but this only covers decompressed data that is shorter than the ram_bytes from the extent ref record. This memset doesn't cover the region between the end of the decompressed data and the end of the page. It has also moved around a few times over the years, so there's no single patch to refer to. This patch fixes bug #3: compressed inline extents followed by a hole and more extents could get non-zero data in the hole as they were read (i.e. bug #3 is the same as bug #1, but s/uncompressed/compressed/). The fix is the same: zero out the hole in the compressed case too, by putting a memset back in uncompress_inline, but this time with correct parameters. The last and oldest bug, bug #0, is the cause of the offending inline extent/hole/extent pattern. Bug #0 is a subtle and mostly-harmless quirk of behavior somewhere in the btrfs write code. In a few special cases, an inline extent and hole are allowed to persist where they normally would be combined with later extents in the file. A fast reproducer for bug #0 is presented below. A few offending extents are also created in the wild during large rsync transfers with the -S flag. A Linux kernel build (git checkout; make allyesconfig; make -j8) will produce a handful of offending files as well. Once an offending file is created, it can present different content to userspace each time it is read. Bug #0 is at least 4 and possibly 8 years old. I verified every vX.Y kernel back to v3.5 has this behavior. There are fossil records of this bug's effects in commits all the way back to v2.6.32. I have no reason to believe bug #0 wasn't present at the beginning of btrfs compression support in v2.6.29, but I can't easily test kernels that old to be sure. It is not clear whether bug #0 is worth fixing. A fix would likely require injecting extra reads into currently write-only paths, and most of the exceptional cases caused by bug #0 are already handled now. Whether we like them or not, bug #0's inline extents followed by holes are part of the btrfs de-facto disk format now, and we need to be able to read them without data corruption or an infoleak. So enough about bug #0, let's get back to bug #3 (this patch). An example of on-disk structure leading to data corruption found in the wild: item 61 key (606890 INODE_ITEM 0) itemoff 9662 itemsize 160 inode generation 50 transid 50 size 47424 nbytes 49141 block group 0 mode 100644 links 1 uid 0 gid 0 rdev 0 flags 0x0(none) item 62 key (606890 INODE_REF 603050) itemoff 9642 itemsize 20 inode ref index 3 namelen 10 name: DB_File.so item 63 key (606890 EXTENT_DATA 0) itemoff 8280 itemsize 1362 inline extent data size 1341 ram 4085 compress(zlib) item 64 key (606890 EXTENT_DATA 4096) itemoff 8227 itemsize 53 extent data disk byte 5367308288 nr 20480 extent data offset 0 nr 45056 ram 45056 extent compression(zlib) Different data appears in userspace during each read of the 11 bytes between 4085 and 4096. The extent in item 63 is not long enough to fill the first page of the file, so a memset is required to fill the space between item 63 (ending at 4085) and item 64 (beginning at 4096) with zero. Here is a reproducer from Liu Bo, which demonstrates another method of creating the same inline extent and hole pattern: Using 'page_poison=on' kernel command line (or enable CONFIG_PAGE_POISONING) run the following: # touch foo # chattr +c foo # xfs_io -f -c "pwrite -W 0 1000" foo # xfs_io -f -c "falloc 4 8188" foo # od -x foo # echo 3 >/proc/sys/vm/drop_caches # od -x foo This produce the following on my box: Correct output: file contains 1000 data bytes followed by zeros: 0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd * 0001740 cdcd cdcd cdcd cdcd 0000 0000 0000 0000 0001760 0000 0000 0000 0000 0000 0000 0000 0000 * 0020000 Actual output: the data after the first 1000 bytes will be different each run: 0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd * 0001740 cdcd cdcd cdcd cdcd 6c63 7400 635f 006d 0001760 5f74 6f43 7400 435f 0053 5f74 7363 7400 0002000 435f 0056 5f74 6164 7400 645f 0062 5f74 (...) Signed-off-by:
Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Reviewed-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Olga Kornievskaia authored
[ Upstream commit 03385332 ] Currently client doesn't respect max sizes server returns in CREATE_SESSION. nfs4_session_set_rwsize() gets called and server->rsize, server->wsize are 0 so they never get set to the sizes returned by the server. Signed-off-by:
Olga Kornievskaia <kolga@netapp.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Daniel Drake authored
[ Upstream commit 822f5845 ] The Intel Compute Stick STCK1A8LFC and Weibu F3C platforms both log 2 error messages during boot: efi: requested map not found. esrt: ESRT header is not in the memory map. Searching the web, this seems to affect many other platforms too. Since these messages are logged as errors, they appear on-screen during the boot process even when using the "quiet" boot parameter used by distros. Demote the ESRT error to a warning so that it does not appear on-screen, and delete the error logging from efi_mem_desc_lookup; both callsites of that function log more specific messages upon failure. Out of curiosity I looked closer at the Weibu F3C. There is no entry in the UEFI-provided memory map which corresponds to the ESRT pointer, but hacking the code to map it anyway, the ESRT does appear to be valid with 2 entries. Signed-off-by:
Daniel Drake <drake@endlessm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Acked-by:
Peter Jones <pjones@redhat.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit e7ede72a ] The current symbols__fixup_end() heuristic for the last entry in the rb tree is suboptimal as it leads to not being able to recognize the symbol in the call graph in a couple of corner cases, for example: i) If the symbol has a start address (f.e. exposed via kallsyms) that is at a page boundary, then the roundup(curr->start, 4096) for the last entry will result in curr->start == curr->end with a symbol length of zero. ii) If the symbol has a start address that is shortly before a page boundary, then also here, curr->end - curr->start will just be very few bytes, where it's unrealistic that we could perform a match against. Instead, change the heuristic to roundup(curr->start, 4096) + 4096, so that we can catch such corner cases and have a better chance to find that specific symbol. It's still just best effort as the real end of the symbol is unknown to us (and could even be at a larger offset than the current range), but better than the current situation. Alexei reported that he recently run into case i) with a JITed eBPF program (these are all page aligned) as the last symbol which wasn't properly shown in the call graph (while other eBPF program symbols in the rb tree were displayed correctly). Since this is a generic issue, lets try to improve the heuristic a bit. Reported-and-Tested-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Fixes: 2e538c4a ("perf tools: Improve kernel/modules symbol lookup") Link: http://lkml.kernel.org/r/bb5c80d27743be6f12afc68405f1956a330e1bc9.1489614365.git.daniel@iogearbox.netSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Jack Morgenstein authored
[ Upstream commit 4cbe4dac ] Some Hypervisors detach VFs from VMs by instantly causing an FLR event to be generated for a VF. In the mlx4 case, this will cause that VF's comm channel to be disabled before the VM has an opportunity to invoke the VF device's "shutdown" method. For such Hypervisors, there is a race condition between the VF's shutdown method and its internal-error detection/reset thread. The internal-error detection/reset thread (which runs every 5 seconds) also detects a disabled comm channel. If the internal-error detection/reset flow wins the race, we still get delays (while that flow tries repeatedly to detect comm-channel recovery). The cited commit fixed the command timeout problem when the internal-error detection/reset flow loses the race. This commit avoids the unneeded delays when the internal-error detection/reset flow wins. Fixes: d585df1c ("net/mlx4_core: Avoid command timeouts during VF driver device shutdown") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Reported-by:
Simon Xiao <sixiao@microsoft.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 7286a35e ] Fix afs_kill_pages() in two ways: (1) If a writeback has been partially flushed, then if we try and kill the pages it contains, some of them may no longer be undergoing writeback and end_page_writeback() will assert. Fix this by checking to see whether the page in question is actually undergoing writeback before ending that writeback. (2) The loop that scans for pages to kill doesn't increase the first page index, and so the loop may not terminate, but it will try to process the same pages over and over again. Fix this by increasing the first page index to one after the last page we processed. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 6d06b0d2 ] afs_write_begin() leaks a ref and a lock on a page if afs_fill_page() fails. Fix the leak by unlocking and releasing the page in the error path. Signed-off-by:
-
Marc Dionne authored
[ Upstream commit ab94f5d0 ] The inode timestamps should be set from the client time in the status received from the server, rather than the server time which is meant for internal server use. Set AFS_SET_MTIME and populate the mtime for operations that take an input status, such as file/dir creation and StoreData. If an input time is not provided the server will set the vnode times based on the current server time. In a situation where the server has some skew with the client, this could lead to the client seeing a timestamp in the future for a file that it just created or wrote. Signed-off-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 146a1192 ] afs_fs_store_data() works out of the size of the write it's going to make, but it uses 32-bit unsigned subtraction in one place that gets automatically cast to loff_t. However, if to < offset, then the number goes negative, but as the result isn't signed, this doesn't get sign-extended to 64-bits when placed in a loff_t. Fix by casting the operands to loff_t. Signed-off-by:
-
Tina Ruchandani authored
[ Upstream commit 56e71431 ] get_seconds() returns real wall-clock seconds. On 32-bit systems this value will overflow in year 2038 and beyond. This patch changes afs_vnode record to use ktime_get_real_seconds() instead, for the fields cb_expires and cb_expires_at. Signed-off-by:
Tina Ruchandani <ruchandani.tina@gmail.com> Signed-off-by:
-
Tina Ruchandani authored
[ Upstream commit 8a79790b ] get_seconds() returns real wall-clock seconds. On 32-bit systems this value will overflow in year 2038 and beyond. This patch changes afs's vlocation record to use ktime_get_real_seconds() instead, for the fields time_of_death and update_at. Signed-off-by:
-
David Howells authored
[ Upstream commit 58fed94d ] Flush outstanding writes in afs when an fd is closed. This is what NFS and CIFS do. Reported-by:
Marc Dionne <marc.c.dionne@gmail.com> Signed-off-by:
-
Marc Dionne authored
[ Upstream commit 627f4694 ] Mode bits for an afs file should not be enforced in the usual way. For files, the absence of user bits can restrict file access with respect to what is granted by the server. These bits apply regardless of the owner or the current uid; the rest of the mode bits (group, other) are ignored. Signed-off-by:
-
Marc Dionne authored
[ Upstream commit 6186f078 ] The group was hard coded to GLOBAL_ROOT_GID; use the group ID that was received from the server. Signed-off-by:
-
David Howells authored
[ Upstream commit 29c8bbbd ] In afs_writepages_region(), inside the loop where we find dirty pages to deal with, one of the if-statements is missing a put_page(). Signed-off-by:
-
Alex Deucher authored
[ Upstream commit 66822d81 ] Higher sclks seem to be unstable on some boards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=100222Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
yong mao authored
[ Upstream commit 40ceda09 ] This patch can fix two issues: Issue 1: In previous code, div may be overflow when setting clock frequency as f_min. We can use DIV_ROUND_UP to fix this boundary related issue. Issue 2: In previous code, we can not set the correct clock frequency when div equals 0xff. Signed-off-by:
Yong Mao <yong.mao@mediatek.com> Signed-off-by:
Chaotian Jing <chaotian.jing@mediatek.com> Reviewed-by:
Daniel Kurtz <djkurtz@chromium.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
[ Upstream commit 2317d5f1 ] I was testing Daniel's changes with his test case, and tweaked it a little. Instead of having the runtime equal to the deadline, I increased the deadline ten fold. Daniel's test case had: attr.sched_runtime = 2 * 1000 * 1000; /* 2 ms */ attr.sched_deadline = 2 * 1000 * 1000; /* 2 ms */ attr.sched_period = 2 * 1000 * 1000 * 1000; /* 2 s */ To make it more interesting, I changed it to: attr.sched_runtime = 2 * 1000 * 1000; /* 2 ms */ attr.sched_deadline = 20 * 1000 * 1000; /* 20 ms */ attr.sched_period = 2 * 1000 * 1000 * 1000; /* 2 s */ The results were rather surprising. The behavior that Daniel's patch was fixing came back. The task started using much more than .1% of the CPU. More like 20%. Looking into this I found that it was due to the dl_entity_overflow() constantly returning true. That's because it uses the relative period against relative runtime vs the absolute deadline against absolute runtime. runtime / (deadline - t) > dl_runtime / dl_period There's even a comment mentioning this, and saying that when relative deadline equals relative period, that the equation is the same as using deadline instead of period. That comment is backwards! What we really want is: runtime / (deadline - t) > dl_runtime / dl_deadline We care about if the runtime can make its deadline, not its period. And then we can say "when the deadline equals the period, the equation is the same as using dl_period instead of dl_deadline". After correcting this, now when the task gets enqueued, it can throttle correctly, and Daniel's fix to the throttling of sleeping deadline tasks works even when the runtime and deadline are not the same. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Juri Lelli <juri.lelli@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luca Abeni <luca.abeni@santannapisa.it> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Romulo Silva de Oliveira <romulo.deoliveira@ufsc.br> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it> Link: http://lkml.kernel.org/r/02135a27f1ae3fe5fd032568a5a2f370e190e8d7.1488392936.git.bristot@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Daniel Bristot de Oliveira authored
[ Upstream commit df8eac8c ] During the activation, CBS checks if it can reuse the current task's runtime and period. If the deadline of the task is in the past, CBS cannot use the runtime, and so it replenishes the task. This rule works fine for implicit deadline tasks (deadline == period), and the CBS was designed for implicit deadline tasks. However, a task with constrained deadline (deadine < period) might be awakened after the deadline, but before the next period. In this case, replenishing the task would allow it to run for runtime / deadline. As in this case deadline < period, CBS enables a task to run for more than the runtime / period. In a very loaded system, this can cause a domino effect, making other tasks miss their deadlines. To avoid this problem, in the activation of a constrained deadline task after the deadline but before the next period, throttle the task and set the replenishing timer to the begin of the next period, unless it is boosted. Reproducer: --------------- %< --------------- int main (int argc, char **argv) { int ret; int flags = 0; unsigned long l = 0; struct timespec ts; struct sched_attr attr; memset(&attr, 0, sizeof(attr)); attr.size = sizeof(attr); attr.sched_policy = SCHED_DEADLINE; attr.sched_runtime = 2 * 1000 * 1000; /* 2 ms */ attr.sched_deadline = 2 * 1000 * 1000; /* 2 ms */ attr.sched_period = 2 * 1000 * 1000 * 1000; /* 2 s */ ts.tv_sec = 0; ts.tv_nsec = 2000 * 1000; /* 2 ms */ ret = sched_setattr(0, &attr, flags); if (ret < 0) { perror("sched_setattr"); exit(-1); } for(;;) { /* XXX: you may need to adjust the loop */ for (l = 0; l < 150000; l++); /* * The ideia is to go to sleep right before the deadline * and then wake up before the next period to receive * a new replenishment. */ nanosleep(&ts, NULL); } exit(0); } --------------- >% --------------- On my box, this reproducer uses almost 50% of the CPU time, which is obviously wrong for a task with 2/2000 reservation. Signed-off-by:
-
Daniel Bristot de Oliveira authored
[ Upstream commit 5ac69d37 ] Currently, the replenishment timer is set to fire at the deadline of a task. Although that works for implicit deadline tasks because the deadline is equals to the begin of the next period, that is not correct for constrained deadline tasks (deadline < period). For instance: f.c: --------------- %< --------------- int main (void) { for(;;); } --------------- >% --------------- # gcc -o f f.c # trace-cmd record -e sched:sched_switch \ -e syscalls:sys_exit_sched_setattr \ chrt -d --sched-runtime 490000000 \ --sched-deadline 500000000 \ --sched-period 1000000000 0 ./f # trace-cmd report | grep "{pid of ./f}" After setting parameters, the task is replenished and continue running until being throttled: f-11295 [003] 13322.113776: sys_exit_sched_setattr: 0x0 The task is throttled after running 492318 ms, as expected: f-11295 [003] 13322.606094: sched_switch: f:11295 [-1] R ==> watchdog/3:32 [0] But then, the task is replenished 500719 ms after the first replenishment: <idle>-0 [003] 13322.614495: sched_switch: swapper/3:0 [120] R ==> f:11295 [-1] Running for 490277 ms: f-11295 [003] 13323.104772: sched_switch: f:11295 [-1] R ==> swapper/3:0 [120] Hence, in the first period, the task runs 2 * runtime, and that is a bug. During the first replenishment, the next deadline is set one period away. So the runtime / period starts to be respected. However, as the second replenishment took place in the wrong instant, the next replenishment will also be held in a wrong instant of time. Rather than occurring in the nth period away from the first activation, it is taking place in the (nth period - relative deadline). Signed-off-by:
Luca Abeni <luca.abeni@santannapisa.it> Reviewed-by:
Juri Lelli <juri.lelli@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Romulo Silva de Oliveira <romulo.deoliveira@ufsc.br> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it> Link: http://lkml.kernel.org/r/ac50d89887c25285b47465638354b63362f8adff.1488392936.git.bristot@redhat.comSigned-off-by:
-
Alex Deucher authored
[ Upstream commit 0f424de1 ] OLAND 0x1002:0x6604 0x1028:0x066F 0x00 seems to have problems with higher sclks. Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Taku Izumi authored
[ Upstream commit fe8daf5f ] This patch fixes netdev->features for Extended Socket network device. Currently Extended Socket network device's netdev->feature claims NETIF_F_HW_CSUM, however this is completely wrong. There's no feature of checksum offloading. That causes invalid TCP/UDP checksum and packet rejection when IP forwarding from Extended Socket network device to other network device. NETIF_F_HW_CSUM should be omitted. Signed-off-by:
Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by:
-
Don Brace authored
[ Upstream commit 87b9e6aa ] Avoid rescan storms. No need to queue another if one is pending. Reviewed-by:
Scott Benesh <scott.benesh@microsemi.com> Reviewed-by:
Scott Teel <scott.teel@microsemi.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Don Brace authored
[ Upstream commit 85b29008 ] - Add in a new case for volume offline. Resolves internal testing bug for multilun array management. - Return correct status for failed TURs. Reviewed-by:
-
Stafford Horne authored
[ Upstream commit 154e67cd ] Was getting the following error with allmodconfig: ERROR: "__get_user_bad" [lib/test_user_copy.ko] undefined! This was simply a missing break statement, causing an unwanted fall through. Signed-off-by:
Stafford Horne <shorne@gmail.com> Signed-off-by:
-
Alexander Shishkin authored
[ Upstream commit 340837f9 ] This adds Intel(R) Trace Hub PCI ID for Gemini Lake SOC. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
-
Jiri Pirko authored
[ Upstream commit e9093b11 ] The num_rec field is 8 bit, so the maximal count number is 255. This fixes vlans learning not being enabled for wider ranges than 255. Fixes: a4feea74 ("mlxsw: reg: Add Switch Port VLAN MAC Learning register definition") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
[ Upstream commit f004ec06 ] The num_rec field is 8 bit, so the maximal count number is 255. This fixes vlans not being enabled for wider ranges than 255. Fixes: b2e345f9 ("mlxsw: reg: Add Switch Port VID and Switch Port VLAN Membership registers definitions") Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit 37c343b4 ] When we notify peers of potential changes, it's also good to update IGMP memberships. For example, during VM migration, updating IGMP memberships will redirect existing multicast streams to the VM at the new location. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Matthias Kaehlcke authored
[ Upstream commit 23f963e9 ] This fixes the following warning when building with clang and CONFIG_DMA_ENGINE_RAID=n : drivers/dma/dmaengine.c:1102:11: error: array index 2 is past the end of the array (which contains 1 element) [-Werror,-Warray-bounds] return &unmap_pool[2]; ^ ~ drivers/dma/dmaengine.c:1083:1: note: array 'unmap_pool' declared here static struct dmaengine_unmap_pool unmap_pool[] = { ^ drivers/dma/dmaengine.c:1104:11: error: array index 3 is past the end of the array (which contains 1 element) [-Werror,-Warray-bounds] return &unmap_pool[3]; ^ ~ drivers/dma/dmaengine.c:1083:1: note: array 'unmap_pool' declared here static struct dmaengine_unmap_pool unmap_pool[] = { Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 6e526fdf ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. The endpoints are specifically dereferenced in the i2400m_bootrom_init path during probe (e.g. in i2400mu_tx_bulk_out). Fixes: f398e424 ("i2400m/USB: probe/disconnect, dev init/shutdown and reset backends") Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
