- 25 May, 2018 40 commits
-
-
NeilBrown authored
[ Upstream commit 2fab9faf ] The lustre-release patch commit bdc5bb52c554 ("LU-4933 osc: Automatically increase the max_dirty_mb") changed - if (cli->cl_dirty + PAGE_CACHE_SIZE <= cli->cl_dirty_max && + if (cli->cl_dirty_pages < cli->cl_dirty_max_pages && When this patch landed in Linux a couple of years later, it landed as - if (cli->cl_dirty + PAGE_SIZE <= cli->cl_dirty_max && + if (cli->cl_dirty_pages <= cli->cl_dirty_max_pages && which is clearly different ('<=' vs '<'), and allows cl_dirty_pages to increase beyond cl_dirty_max_pages - which causes a latter assertion to fails. Fixes: 3147b268 ("staging: lustre: osc: Automatically increase the max_dirty_mb") Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Larry Finger authored
[ Upstream commit fed03fe7 ] The Asus Z370-I contains a Realtek RTL8822BE device with an associated BT chip using a USB ID of 0b05:185c. This device is added to the driver. Signed-off-by:
Hon Weng Chong <honwchong@gmail.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Brad Love authored
[ Upstream commit c7c7e8d7 ] Hauppauge em28xx bulk devices exhibit continuity errors and corrupted packets, when run in VMWare virtual machines. Unknown if other manufacturers bulk models exhibit the same issue. KVM/Qemu is unaffected. According to documentation the maximum packet multiplier for em28xx in bulk transfer mode is 256 * 188 bytes. This changes the size of bulk transfers to maximum supported value and have a bonus beneficial alignment. Before: After: This sets up USB to expect just as many bytes as the em28xx is set to emit. Successful usage under load afterwards natively and in both VMWare and KVM/Qemu virtual machines. Signed-off-by:
Brad Love <brad@nextdimension.cc> Reviewed-by:
Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Chris Dickens authored
[ Upstream commit 5d6ae4f0 ] When handling an OS descriptor request, one of the first operations is to zero out the request buffer using the wLength from the setup packet. There is no bounds checking, so a wLength > 4096 would clobber memory adjacent to the request buffer. Fix this by taking the min of wLength and the request buffer length prior to the memset. While at it, define the buffer length in a header file so that magic numbers don't appear throughout the code. When returning data to the host, the data length should be the min of the wLength and the valid data we have to return. Currently we are returning wLength, thus requests for a wLength greater than the amount of data in the OS descriptor buffer would return invalid (albeit zero'd) data following the valid descriptor data. Fix this by counting the number of bytes when constructing the data and using this when determining the length of the request. Signed-off-by:
Chris Dickens <christopher.a.dickens@gmail.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Wolfram Sang authored
[ Upstream commit ac87e560 ] Due to a typo, the mask was destroyed by a comparison instead of a bit shift. Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Lars-Peter Clausen authored
[ Upstream commit 4058ebf3 ] When using a AIO read() operation on the function FS gadget driver a URB is submitted asynchronously and on URB completion the received data is copied to the userspace buffer associated with the read operation. This is done from a kernel worker thread invoking copy_to_user() (through copy_to_iter()). And while the user space process memory is made available to the kernel thread using use_mm(), some architecture require in addition to this that the operation runs with USER_DS set. Otherwise the userspace memory access will fail. For example on ARM64 with Privileged Access Never (PAN) and User Access Override (UAO) enabled the following crash occurs. Internal error: Accessing user space memory with fs=KERNEL_DS: 9600004f [#1] SMP Modules linked in: CPU: 2 PID: 1636 Comm: kworker/2:1 Not tainted 4.9.0-04081-g8ab2dfb-dirty #487 Hardware name: ZynqMP ZCU102 Rev1.0 (DT) Workqueue: events ffs_user_copy_worker task: ffffffc87afc8080 task.stack: ffffffc87a00c000 PC is at __arch_copy_to_user+0x190/0x220 LR is at copy_to_iter+0x78/0x3c8 [...] [<ffffff800847b790>] __arch_copy_to_user+0x190/0x220 [<ffffff80086f25d8>] ffs_user_copy_worker+0x70/0x130 [<ffffff80080b8c64>] process_one_work+0x1dc/0x460 [<ffffff80080b8f38>] worker_thread+0x50/0x4b0 [<ffffff80080bf5a0>] kthread+0xd8/0xf0 [<ffffff8008083680>] ret_from_fork+0x10/0x50 Address this by placing a set_fs(USER_DS) before of the copy operation and revert it again once the copy operation has finished. This patch is analogous to commit d7ffde35 ("vhost: use USER_DS in vhost_worker thread") which addresses the same underlying issue. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Lars-Peter Clausen authored
[ Upstream commit 946ef68a ] Some UDC drivers (like the DWC3) expect that the response to a setup() request is queued from within the setup function itself so that it is available as soon as setup() has completed. Upon receiving a setup request the function fs driver creates an event that is made available to userspace. And only once userspace has acknowledged that event the response to the setup request is queued. So it violates the requirement of those UDC drivers and random failures can be observed. This is basically a race condition and if userspace is able to read the event and queue the response fast enough all is good. But if it is not, for example because other processes are currently scheduled to run, the USB host that sent the setup request will observe an error. To avoid this the gadget framework provides the USB_GADGET_DELAYED_STATUS return code. If a setup() callback returns this value the UDC driver is aware that response is not yet available and can uses the appropriate methods to handle this case. Since in the case of function fs the response will never be available when the setup() function returns make sure that this status code is used. This fixed random occasional failures that were previously observed on a DWC3 based system under high system load. Signed-off-by:
-
Minas Harutyunyan authored
[ Upstream commit 92a8dd26 ] Added missing GUSBCFG programming in host mode, which fixes transaction errors issue on HiKey and Altera Cyclone V boards. These field even if was programmed in device mode (in function dwc2_hsotg_core_init_disconnected()) will be resetting to POR values after core soft reset applied. So, each time when switching to host mode required to set this field to correct value. Acked-by:
John Youn <johnyoun@synopsys.com> Signed-off-by:
Minas Harutyunyan <hminas@synopsys.com> Signed-off-by:
Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by:
-
Grigor Tovmasyan authored
[ Upstream commit 12814a3f ] The maximum value that unsigned char can hold is 255, meanwhile the maximum value of interval is 2^(bIntervalMax-1)=2^15. Signed-off-by:
-
Mathias Nyman authored
[ Upstream commit a400efe4 ] set udev->slot_id to zero when disabling and freeing the xhci slot. Prevents usb core from calling xhci with a stale slot id. xHC controller may be reset during resume to recover from some error. All slots are unusable as they are disabled and freed. xhci driver starts slot enumeration again from 1 in the order they are enabled. In the worst case a stale udev->slot_id for one device matches a newly enabled slot_id for a different device, causing us to perform a action on the wrong device. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Thinh Nguyen authored
[ Upstream commit 0cab8d26 ] Update two GTXFIFOSIZ bit fields for the DWC_usb31 controller. TXFDEP is a 15-bit value instead of 16-bit value, and bit 15 is TXFRAMNUM. The GTXFIFOSIZ register for DWC_usb31 is as follows: +-------+-----------+----------------------------------+ | BITS | Name | Description | +=======+===========+==================================+ | 31:16 | TXFSTADDR | Transmit FIFOn RAM Start Address | | 15 | TXFRAMNUM | Asynchronous/Periodic TXFIFO | | 14:0 | TXFDEP | TXFIFO Depth | +-------+-----------+----------------------------------+ Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
-
Thinh Nguyen authored
[ Upstream commit fab38333 ] >From DWC_usb31 programming guide section 1.3.2, once DWC3_DCTL_CSFTRST bit is cleared, we must wait at least 50ms before accessing the PHY domain (synchronization delay). Signed-off-by:
-
Nobutaka Okabe authored
[ Upstream commit 71426535 ] Add native DSD support quirk for Luxman DA-06 DAC, by adding the PID/VID 1852:5065. Rename "is_marantz_denon_dac()" function to "is_itf_usb_dsd_2alts_dac()" to cover broader device family sharing the same USB audio implementation(*). For the same reason, rename "is_teac_dsd_dac()" function to "is_itf_usb_dsd_3alts_dac()". (*) These devices have the same USB controller "ITF-USB DSD", supplied by INTERFACE Co., Ltd. "ITF-USB DSD" USB controller has two patterns, Pattern 1. (2 altsets version) - Altset 0: for control - Altset 1: for stream (S32) - Altset 2: for stream (S32, DSD_U32) Pattern 2. (3 altsets version) - Altset 0: for control - Altset 1: for stream (S16) - Altset 2: for stream (S32) - Altset 3: for stream (S32, DSD_U32) "is_itf_usb_dsd_2alts_dac()" returns true, if the DAC has "Pattern 1" USB controller, and "is_itf_usb_dsd_3alts_dac()" returns true, if "Pattern2". Signed-off-by:
Nobutaka Okabe <nob77413@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Vicente Bergas authored
[ Upstream commit a41e0796 ] This WiFi/Bluetooth USB dongle uses a Realtek chipset, so, use btrtl for it. Product information: https://wikidevi.com/wiki/Edimax_EW-7611ULB >From /sys/kernel/debug/usb/devices T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=7392 ProdID=a611 Rev= 2.00 S: Manufacturer=Realtek S: Product=Edimax Wi-Fi N150 Bluetooth4.0 USB Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 6 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8723bu E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=500us E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Tested-by:
Vicente Bergas <vicencb@gmail.com> Signed-off-by:
-
Giuseppe Lippolis authored
[ Upstream commit d4c4bc11 ] This modem is embedded on dlink dwr-921 router. The oem configuration states: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=0918 Rev= 2.32 S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution Signed-off-by:
Giuseppe Lippolis <giu.lippolis@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Torsten Hilbrich authored
[ Upstream commit f3d801ba ] This is needed to support the modem found in HP EliteBook 820 G3. Signed-off-by:
Torsten Hilbrich <torsten.hilbrich@secunet.com> Signed-off-by:
-
Fredrik Noring authored
[ Upstream commit d6c931ea ] Scatter-gather needs to be disabled when using dma_declare_coherent_memory and HCD_LOCAL_MEM. Andrea Righi made the equivalent fix for EHCI drivers in commit 4307a28e "USB: EHCI: fix NULL pointer dererence in HCDs that use HCD_LOCAL_MEM". The following NULL pointer WARN_ON_ONCE triggered with OHCI drivers: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 49 at drivers/usb/core/hcd.c:1379 hcd_alloc_coherent+0x4c/0xc8 Modules linked in: CPU: 0 PID: 49 Comm: usb-storage Not tainted 4.15.0+ #1014 Stack : 00000000 00000000 805a78d2 0000003a 81f5c2cc 8053d367 804d77fc 00000031 805a3a08 00000563 81ee9400 805a0000 00000000 10058c00 81f61b10 805c0000 00000000 00000000 805a0000 00d9038e 00000004 803ee818 00000006 312e3420 805c0000 00000000 00000073 81f61958 00000000 00000000 802eb380 804fd538 00000009 00000563 81ee9400 805a0000 00000002 80056148 00000000 805a0000 ... Call Trace: [<578af360>] show_stack+0x74/0x104 [<2f3702c6>] __warn+0x118/0x120 [<ae93fc9e>] warn_slowpath_null+0x44/0x58 [<a891a517>] hcd_alloc_coherent+0x4c/0xc8 [<3578fa36>] usb_hcd_map_urb_for_dma+0x4d8/0x534 [<110bc94c>] usb_hcd_submit_urb+0x82c/0x834 [<02eb5baf>] usb_sg_wait+0x14c/0x1a0 [<ccd09e85>] usb_stor_bulk_transfer_sglist.part.1+0xac/0x124 [<87a5c34c>] usb_stor_bulk_srb+0x40/0x60 [<ff1792ac>] usb_stor_Bulk_transport+0x160/0x37c [<b9e2709c>] usb_stor_invoke_transport+0x3c/0x500 [<004754f4>] usb_stor_control_thread+0x258/0x28c [<22edf42e>] kthread+0x134/0x13c [<a419ffd0>] ret_from_kernel_thread+0x14/0x1c ---[ end trace bcdb825805eefdcc ]--- Signed-off-by:
Fredrik Noring <noring@nocrew.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Dominik Bozek authored
[ Upstream commit b86b8eb6 ] ACM driver may accept data to transmit while system is not fully resumed. In this case ACM driver buffers data and prepare URBs on usb anchor list. There is a little chance that two tasks put a char and initiate acm_tty_flush_chars(). In such a case, driver will put one URB twice on usb anchor list. This patch also reset length of data before resue of a buffer. This not only prevent sending rubbish, but also lower risc of race. Without this patch we hit following kernel panic in one of our stabilty/stress tests. [ 46.884442] *list_add double add*: new=ffff9b2ab7289330, prev=ffff9b2ab7289330, next=ffff9b2ab81e28e0. [ 46.884476] Modules linked in: hci_uart btbcm bluetooth rfkill_gpio igb_avb(O) cfg80211 snd_soc_sst_bxt_tdf8532 snd_soc_skl snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_soc_sst_acpi snd_soc_sst_match snd_hda_ext_core snd_hda_core trusty_timer trusty_wall trusty_log trusty_virtio trusty_ipc trusty_mem trusty_irq trusty virtio_ring virtio intel_ipu4_mmu_bxtB0 lib2600_mod_bxtB0 intel_ipu4_isys_mod_bxtB0 lib2600psys_mod_bxtB0 intel_ipu4_psys_mod_bxtB0 intel_ipu4_mod_bxtB0 intel_ipu4_wrapper_bxtB0 intel_ipu4_acpi videobuf2_dma_contig as3638 dw9714 lm3643 crlmodule smiapp smiapp_pll [ 46.884480] CPU: 1 PID: 33 Comm: kworker/u8:1 Tainted: G U W O 4.9.56-quilt-2e5dc0ac-g618ed69ced6e-dirty #4 [ 46.884489] Workqueue: events_unbound flush_to_ldisc [ 46.884494] ffffb98ac012bb08 ffffffffad3e82e5 ffffb98ac012bb58 0000000000000000 [ 46.884497] ffffb98ac012bb48 ffffffffad0a23d1 00000024ad6374dd ffff9b2ab7289330 [ 46.884500] ffff9b2ab81e28e0 ffff9b2ab7289330 0000000000000002 0000000000000000 [ 46.884501] Call Trace: [ 46.884507] [<ffffffffad3e82e5>] dump_stack+0x67/0x92 [ 46.884511] [<ffffffffad0a23d1>] __warn+0xd1/0xf0 [ 46.884513] [<ffffffffad0a244f>] warn_slowpath_fmt+0x5f/0x80 [ 46.884516] [<ffffffffad407443>] __list_add+0xb3/0xc0 [ 46.884521] [<ffffffffad71133c>] *usb_anchor_urb*+0x4c/0xa0 [ 46.884524] [<ffffffffad782c6f>] *acm_tty_flush_chars*+0x8f/0xb0 [ 46.884527] [<ffffffffad782cd1>] *acm_tty_put_char*+0x41/0x100 [ 46.884530] [<ffffffffad4ced34>] tty_put_char+0x24/0x40 [ 46.884533] [<ffffffffad4d3bf5>] do_output_char+0xa5/0x200 [ 46.884535] [<ffffffffad4d3e98>] __process_echoes+0x148/0x290 [ 46.884538] [<ffffffffad4d654c>] n_tty_receive_buf_common+0x57c/0xb00 [ 46.884541] [<ffffffffad4d6ae4>] n_tty_receive_buf2+0x14/0x20 [ 46.884543] [<ffffffffad4d9662>] tty_ldisc_receive_buf+0x22/0x50 [ 46.884545] [<ffffffffad4d9c05>] flush_to_ldisc+0xc5/0xe0 [ 46.884549] [<ffffffffad0bcfe8>] process_one_work+0x148/0x440 [ 46.884551] [<ffffffffad0bdc19>] worker_thread+0x69/0x4a0 [ 46.884554] [<ffffffffad0bdbb0>] ? max_active_store+0x80/0x80 [ 46.884556] [<ffffffffad0c2e10>] kthread+0x110/0x130 [ 46.884559] [<ffffffffad0c2d00>] ? kthread_park+0x60/0x60 [ 46.884563] [<ffffffffadad9917>] ret_from_fork+0x27/0x40 [ 46.884566] ---[ end trace 3bd599058b8a9eb3 ]--- Signed-off-by:
Dominik Bozek <dominikx.bozek@intel.com> Signed-off-by:
Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Vardan Mikayelyan authored
[ Upstream commit 755d7395 ] We should call dwc2_hsotg_enqueue_setup() after properly setting lx_state. Because it may cause error-out from dwc2_hsotg_enqueue_setup() due to wrong value in lx_state. Issue can be reproduced by loading driver while connected A-Connector (start in A-HOST mode) then disconnect A-Connector to switch to B-DEVICE. Acked-by:
Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by:
-
Stefan Agner authored
[ Upstream commit 20c63f40 ] Clang reports the following warning: drivers/usb/gadget/udc/fsl_udc_core.c:1312:10: warning: address of array 'ep->name' will always evaluate to 'true' [-Wpointer-bool-conversion] if (ep->name) ~~ ~~~~^~~~ It seems that the authors intention was to check if the ep has been configured through struct_ep_setup. Check whether struct usb_ep name pointer has been set instead. Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
-
Manu Gautam authored
[ Upstream commit e74bd4d3 ] Driver is tracing usb_request after freeing it. Fix it by changing the order. Signed-off-by:
Manu Gautam <mgautam@codeaurora.org> Signed-off-by:
-
Roger Quadros authored
[ Upstream commit c49f6305 ] The USB cable state can change during suspend/resume so be sure to check and update the extcon state. Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Brian Norris authored
[ Upstream commit 00b42170 ] In this function, we init the USB2 and USB3 PHYs, but if soft reset times out, we don't unwind this. Noticed by inspection. Signed-off-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
-
John Keeping authored
[ Upstream commit 8813a59e ] If there are multiple functions associated with a configuration, then the UAC2 interfaces may not start at zero. Set the correct first interface number in the association descriptor so that the audio interfaces are enumerated correctly in this case. Reviewed-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
John Keeping <john@metanate.com> Signed-off-by:
-
Tetsuo Handa authored
commit a466ef76 upstream. >From ff82bedd3e12f0d3353282054ae48c3bd8c72012 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Date: Wed, 9 May 2018 12:12:39 +0900 Subject: x86/kexec: Avoid double free_page() upon do_kexec_load() failure syzbot is reporting crashes after memory allocation failure inside do_kexec_load() [1]. This is because free_transition_pgtable() is called by both init_transition_pgtable() and machine_kexec_cleanup() when memory allocation failed inside init_transition_pgtable(). Regarding 32bit code, machine_kexec_free_page_tables() is called by both machine_kexec_alloc_page_tables() and machine_kexec_cleanup() when memory allocation failed inside machine_kexec_alloc_page_tables(). Fix this by leaving the error handling to machine_kexec_cleanup() (and optionally setting NULL after free_page()). [1] https://syzkaller.appspot.com/bug?id=91e52396168cf2bdd572fe1e1bc0bc645c1c6b40 Fixes: f5deb796 ("x86: kexec: Use one page table in x86_64 machine_kexec") Fixes: 92be3d6b ("kexec/i386: allocate page table pages dynamically") Reported-by:
syzbot <syzbot+d96f60296ef613fe1d69@syzkaller.appspotmail.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Baoquan He <bhe@redhat.com> Cc: thomas.lendacky@amd.com Cc: prudo@linux.vnet.ibm.com Cc: Huang Ying <ying.huang@intel.com> Cc: syzkaller-bugs@googlegroups.com Cc: takahiro.akashi@linaro.org Cc: H. Peter Anvin <hpa@zytor.com> Cc: akpm@linux-foundation.org Cc: dyoung@redhat.com Cc: kirill.shutemov@linux.intel.com Link: https://lkml.kernel.org/r/201805091942.DGG12448.tMFVFSJFQOOLHO@I-love.SAKURA.ne.jpSigned-off-by:
-
Tetsuo Handa authored
commit 66072c29 upstream. syzbot is reporting ODEBUG messages at hfsplus_fill_super() [1]. This is because hfsplus_fill_super() forgot to call cancel_delayed_work_sync(). As far as I can see, it is hfsplus_mark_mdb_dirty() from hfsplus_new_inode() in hfsplus_fill_super() that calls queue_delayed_work(). Therefore, I assume that hfsplus_new_inode() does not fail if queue_delayed_work() was called, and the out_put_hidden_dir label is the appropriate location to call cancel_delayed_work_sync(). [1] https://syzkaller.appspot.com/bug?id=a66f45e96fdbeb76b796bf46eb25ea878c42a6c9 Link: http://lkml.kernel.org/r/964a8b27-cd69-357c-fe78-76b066056201@I-love.SAKURA.ne.jpSigned-off-by:
syzbot <syzbot+4f2e5f086147d543ab03@syzkaller.appspotmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Johannes Berg authored
commit a7cfebcb upstream. There's currently no limit on wiphy names, other than netlink message size and memory limitations, but that causes issues when, for example, the wiphy name is used in a uevent, e.g. in rfkill where we use the same name for the rfkill instance, and then the buffer there is "only" 2k for the environment variables. This was reported by syzkaller, which used a 4k name. Limit the name to something reasonable, I randomly picked 128. Reported-by: syzbot+230d9e642a85d3fec29c@syzkaller.appspotmail.com Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Jens Remus authored
commit fa89adba upstream. zfcp_erp_adapter_reopen() schedules blocking of all of the adapter's rports via zfcp_scsi_schedule_rports_block() and enqueues a reopen adapter ERP action via zfcp_erp_action_enqueue(). Both are separately processed asynchronously and concurrently. Blocking of rports is done in a kworker by zfcp_scsi_rport_work(). It calls zfcp_scsi_rport_block(), which then traces a DBF REC "scpdely" via zfcp_dbf_rec_trig(). zfcp_dbf_rec_trig() acquires the DBF REC spin lock and then iterates with list_for_each() over the adapter's ERP ready list without holding the ERP lock. This opens a race window in which the current list entry can be moved to another list, causing list_for_each() to iterate forever on the wrong list, as the erp_ready_head is never encountered as terminal condition. Meanwhile the ERP action can be processed in the ERP thread by zfcp_erp_thread(). It calls zfcp_erp_strategy(), which acquires the ERP lock and then calls zfcp_erp_action_to_running() to move the ERP action from the ready to the running list. zfcp_erp_action_to_running() can move the ERP action using list_move() just during the aforementioned race window. It then traces a REC RUN "erator1" via zfcp_dbf_rec_run(). zfcp_dbf_rec_run() tries to acquire the DBF REC spin lock. If this is held by the infinitely looping kworker, it effectively spins forever. Example Sequence Diagram: Process ERP Thread rport_work ------------------- ------------------- ------------------- zfcp_erp_adapter_reopen() zfcp_erp_adapter_block() zfcp_scsi_schedule_rports_block() lock ERP zfcp_scsi_rport_work() zfcp_erp_action_enqueue(ZFCP_ERP_ACTION_REOPEN_ADAPTER) list_add_tail() on ready !(rport_task==RPORT_ADD) wake_up() ERP thread zfcp_scsi_rport_block() zfcp_dbf_rec_trig() zfcp_erp_strategy() zfcp_dbf_rec_trig() unlock ERP lock DBF REC zfcp_erp_wait() lock ERP | zfcp_erp_action_to_running() | list_for_each() ready | list_move() current entry | ready to running | zfcp_dbf_rec_run() endless loop over running | zfcp_dbf_rec_run_lvl() | lock DBF REC spins forever Any adapter recovery can trigger this, such as setting the device offline or reboot. V4.9 commit 4eeaa4f3 ("zfcp: close window with unblocked rport during rport gone") introduced additional tracing of (un)blocking of rports. It missed that the adapter->erp_lock must be held when calling zfcp_dbf_rec_trig(). This fix uses the approach formerly introduced by commit aa0fec62 ("[SCSI] zfcp: Fix sparse warning by providing new entry in dbf") that got later removed by commit ae0904f6 ("[SCSI] zfcp: Redesign of the debug tracing for recovery actions."). Introduce zfcp_dbf_rec_trig_lock(), a wrapper for zfcp_dbf_rec_trig() that acquires and releases the adapter->erp_lock for read. Reported-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Jens Remus <jremus@linux.ibm.com> Fixes: 4eeaa4f3 ("zfcp: close window with unblocked rport during rport gone") Cc: <stable@vger.kernel.org> # 2.6.32+ Reviewed-by:
Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Alexander Potapenko authored
commit a45b599a upstream. This shall help avoid copying uninitialized memory to the userspace when calling ioctl(fd, SG_IO) with an empty command. Reported-by: syzbot+7d26fc1eea198488deab@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by:
Alexander Potapenko <glider@google.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Jason Yan authored
commit 318aaf34 upstream. When ata device doing EH, some commands still attached with tasks are not passed to libata when abort failed or recover failed, so libata did not handle these commands. After these commands done, sas task is freed, but ata qc is not freed. This will cause ata qc leak and trigger a warning like below: WARNING: CPU: 0 PID: 28512 at drivers/ata/libata-eh.c:4037 ata_eh_finish+0xb4/0xcc CPU: 0 PID: 28512 Comm: kworker/u32:2 Tainted: G W OE 4.14.0#1 ...... Call trace: [<ffff0000088b7bd0>] ata_eh_finish+0xb4/0xcc [<ffff0000088b8420>] ata_do_eh+0xc4/0xd8 [<ffff0000088b8478>] ata_std_error_handler+0x44/0x8c [<ffff0000088b8068>] ata_scsi_port_error_handler+0x480/0x694 [<ffff000008875fc4>] async_sas_ata_eh+0x4c/0x80 [<ffff0000080f6be8>] async_run_entry_fn+0x4c/0x170 [<ffff0000080ebd70>] process_one_work+0x144/0x390 [<ffff0000080ec100>] worker_thread+0x144/0x418 [<ffff0000080f2c98>] kthread+0x10c/0x138 [<ffff0000080855dc>] ret_from_fork+0x10/0x18 If ata qc leaked too many, ata tag allocation will fail and io blocked for ever. As suggested by Dan Williams, defer ata device commands to libata and merge sas_eh_finish_cmd() with sas_eh_defer_cmd(). libata will handle ata qcs correctly after this. Signed-off-by:
Jason Yan <yanaijie@huawei.com> CC: Xiaofei Tan <tanxiaofei@huawei.com> CC: John Garry <john.garry@huawei.com> CC: Dan Williams <dan.j.williams@intel.com> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit de5cb6eb ] The BPF JIT need safe guarding against spectre v2 in the sk_load_xxx assembler stubs and the indirect branches generated by the JIT itself need to be converted to expolines. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit 6deaa3bb ] The BPF JIT uses a 'b <disp>(%r<x>)' instruction in the definition of the sk_load_word and sk_load_half functions. Add support for branch-on-condition instructions contained in the thunk code of an expoline. Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit 4253b0e0 ] The nospec-branch.c file is compiled without the gcc options to generate expoline thunks. The return branch of the sysfs show functions cpu_show_spectre_v1 and cpu_show_spectre_v2 is an indirect branch as well. These need to be compiled with expolines. Move the sysfs functions for spectre reporting to a separate file and loose an '.' for one of the messages. Cc: stable@vger.kernel.org # 4.16 Fixes: d424986f ("s390: add sysfs attributes for spectre") Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit c50c84c3 ] The assember code in arch/s390/kernel uses a few more indirect branches which need to be done with execute trampolines for CONFIG_EXPOLINE=y. Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5e ("s390: introduce execute-trampolines for branches") Reviewed-by:
Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit 23a4d7fd ] The return from the ftrace_stub, _mcount, ftrace_caller and return_to_handler functions is done with "br %r14" and "br %r1". These are indirect branches as well and need to use execute trampolines for CONFIG_EXPOLINE=y. The ftrace_caller function is a special case as it returns to the start of a function and may only use %r0 and %r1. For a pre z10 machine the standard execute trampoline uses a LARL + EX to do this, but this requires *two* registers in the range %r1..%r15. To get around this the 'br %r1' located in the lowcore is used, then the EX instruction does not need an address register. But the lowcore trick may only be used for pre z14 machines, with noexec=on the mapping for the first page may not contain instructions. The solution for that is an ALTERNATIVE in the expoline THUNK generated by 'GEN_BR_THUNK %r1' to switch to EXRL, this relies on the fact that a machine that supports noexec=on has EXRL as well. Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5e ("s390: introduce execute-trampolines for branches") Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit 97489e06 ] The return from the memmove, memset, memcpy, __memset16, __memset32 and __memset64 functions are done with "br %r14". These are indirect branches as well and need to use execute trampolines for CONFIG_EXPOLINE=y. Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5e ("s390: introduce execute-trampolines for branches") Reviewed-by:
-
Martin Schwidefsky authored
[ Upstream commit 467a3bf2 ] The return from the crc32_le_vgfm_16/crc32c_le_vgfm_16 and the crc32_be_vgfm_16 functions are done with "br %r14". These are indirect branches as well and need to use execute trampolines for CONFIG_EXPOLINE=y. Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5e ("s390: introduce execute-trampolines for branches") Reviewed-by:
-
Martin Schwidefsky authored
[ Upstream commit 6dd85fbb ] To be able to use the expoline branches in different assembler files move the associated macros from entry.S to a new header nospec-insn.h. While we are at it make the macros a bit nicer to use. Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5e ("s390: introduce execute-trampolines for branches") Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit fba9eb79 ] Add a header with macros usable in assembler files to emit alternative code sequences. It works analog to the alternatives for inline assmeblies in C files, with the same restrictions and capabilities. The syntax is ALTERNATIVE "<default instructions sequence>", \ "<alternative instructions sequence>", \ "<features-bit>" and ALTERNATIVE_2 "<default instructions sequence>", \ "<alternative instructions sqeuence #1>", \ "<feature-bit #1>", "<alternative instructions sqeuence #2>", \ "<feature-bit #2>" Reviewed-by:
Vasily Gorbik <gor@linux.vnet.ibm.com> Signed-off-by:
-
Al Viro authored
commit 5aa1437d upstream. open file, unlink it, then use ioctl(2) to make it immutable or append only. Now close it and watch the blocks *not* freed... Immutable/append-only checks belong in ->setattr(). Note: the bug is old and backport to anything prior to 737f2e93 ("ext2: convert to use the new truncate convention") will need these checks lifted into ext2_setattr(). Cc: stable@kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
