- 10 Sep, 2019 20 commits
-
-
YueHaibing authored
[ Upstream commit 68e03b85 ] when do randbuilding, I got this error: In file included from drivers/hwmon/pmbus/ucd9000.c:19:0: ./include/linux/gpio/driver.h:576:1: error: redefinition of gpiochip_add_pin_range gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name, ^~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/hwmon/pmbus/ucd9000.c:18:0: ./include/linux/gpio.h:245:1: note: previous definition of gpiochip_add_pin_range was here gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name, ^~~~~~~~~~~~~~~~~~~~~~ Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: 964cb341 ("gpio: move pincontrol calls to <linux/gpio/driver.h>") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190731123814.46624-1-yuehaibing@huawei.comSigned-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Thomas Falcon authored
[ Upstream commit 66cf4710 ] The ibm,mac-address-filters property defines the maximum number of addresses the hypervisor's multicast filter list can support. It is encoded as a big-endian integer in the OF device tree, but the virtual ethernet driver does not convert it for use by little-endian systems. As a result, the driver is not behaving as it should on affected systems when a large number of multicast addresses are assigned to the device. Reported-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Matthias Kaehlcke authored
[ Upstream commit 8059ba0b ] On WCN3990 downloading the NVM sometimes fails with a "TLV response size mismatch" error: [ 174.949955] Bluetooth: btqca.c:qca_download_firmware() hci0: QCA Downloading qca/crnv21.bin [ 174.958718] Bluetooth: btqca.c:qca_tlv_send_segment() hci0: QCA TLV response size mismatch It seems the controller needs a short time after downloading the firmware before it is ready for the NVM. A delay as short as 1 ms seems sufficient, make it 10 ms just in case. No event is received during the delay, hence we don't just silently drop an extra event. Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 125b7e09 ] clang warns: drivers/net/ethernet/toshiba/tc35815.c:1507:30: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand] if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN) ^ ~~~~~~~~~~~~ drivers/net/ethernet/toshiba/tc35815.c:1507:30: note: use '&' for a bitwise operation if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN) ^~ & drivers/net/ethernet/toshiba/tc35815.c:1507:30: note: remove constant to silence this warning if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN) ~^~~~~~~~~~~~~~~ 1 warning generated. Explicitly check that NET_IP_ALIGN is not zero, which matches how this is checked in other parts of the tree. Because NET_IP_ALIGN is a build time constant, this check will be constant folded away during optimization. Fixes: 82a9928d ("tc35815: Enable StripCRC feature") Link: https://github.com/ClangBuiltLinux/linux/issues/608Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dexuan Cui authored
[ Upstream commit 6d0d779d ] This fixes a warning of "suspicious rcu_dereference_check() usage" when nload runs. Fixes: 776e726b ("netvsc: fix RCU warning in get_stats") Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit b3e78adc ] Change an error message to work for any object being pinned not just programs. Fixes: 71bb428f ("tools: bpf: add bpftool") Signed-off-by:
Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit 6a0a8d10 ] If a rule that has already a bound anonymous set fails to be added, the preparation phase releases the rule and the bound set. However, the transaction object from the abort path still has a reference to the set object that is stale, leading to a use-after-free when checking for the set->bound field. Add a new field to the transaction that specifies if the set is bound, so the abort path can skip releasing it since the rule command owns it and it takes care of releasing it. After this update, the set->bound field is removed. [ 24.649883] Unable to handle kernel paging request at virtual address 0000000000040434 [ 24.657858] Mem abort info: [ 24.660686] ESR = 0x96000004 [ 24.663769] Exception class = DABT (current EL), IL = 32 bits [ 24.669725] SET = 0, FnV = 0 [ 24.672804] EA = 0, S1PTW = 0 [ 24.675975] Data abort info: [ 24.678880] ISV = 0, ISS = 0x00000004 [ 24.682743] CM = 0, WnR = 0 [ 24.685723] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000428952000 [ 24.692207] [0000000000040434] pgd=0000000000000000 [ 24.697119] Internal error: Oops: 96000004 [#1] SMP [...] [ 24.889414] Call trace: [ 24.891870] __nf_tables_abort+0x3f0/0x7a0 [ 24.895984] nf_tables_abort+0x20/0x40 [ 24.899750] nfnetlink_rcv_batch+0x17c/0x588 [ 24.904037] nfnetlink_rcv+0x13c/0x190 [ 24.907803] netlink_unicast+0x18c/0x208 [ 24.911742] netlink_sendmsg+0x1b0/0x350 [ 24.915682] sock_sendmsg+0x4c/0x68 [ 24.919185] ___sys_sendmsg+0x288/0x2c8 [ 24.923037] __sys_sendmsg+0x7c/0xd0 [ 24.926628] __arm64_sys_sendmsg+0x2c/0x38 [ 24.930744] el0_svc_common.constprop.0+0x94/0x158 [ 24.935556] el0_svc_handler+0x34/0x90 [ 24.939322] el0_svc+0x8/0xc [ 24.942216] Code: 37280300 f9404023 91014262 aa1703e0 (f9401863) [ 24.948336] ---[ end trace cebbb9dcbed3b56f ]--- Fixes: f6ac8585 ("netfilter: nf_tables: unbind set in rule from commit path") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Fuqian Huang authored
[ Upstream commit 8c25d088 ] As spin_unlock_irq will enable interrupts. Function tsi108_stat_carry is called from interrupt handler tsi108_irq. Interrupts are enabled in interrupt handler. Use spin_lock_irqsave/spin_unlock_irqrestore instead of spin_(un)lock_irq in IRQ context to avoid this. Signed-off-by:
Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by:
-
Martin Sperl authored
[ Upstream commit 73b114ee ] On long running tests with a mcp2517fd can controller it showed that on rare occations the data read shows corruptions for longer spi transfers. Example of a 22 byte transfer: expected (as captured on logic analyzer): FF FF 78 00 00 00 08 06 00 00 91 20 77 56 84 85 86 87 88 89 8a 8b read by the driver: FF FF 78 00 00 00 08 06 00 00 91 20 77 56 84 88 89 8a 00 00 8b 9b To fix this use BCM2835_AUX_SPI_STAT_RX_LVL to determine when we may read data from the fifo reliably without any corruption. Surprisingly the only values ever empirically read in BCM2835_AUX_SPI_STAT_RX_LVL are 0x00, 0x10, 0x20 and 0x30. So whenever the mask is not 0 we can read from the fifo in a safe manner. The patch has now been tested intensively and we are no longer able to reproduce the "RX" issue any longer. Fixes: 1ea29b39 ("spi: bcm2835aux: add bcm2835 auxiliary spi device...") Reported-by:
Hubert Denkmair <h.denkmair@intence.de> Signed-off-by:
Martin Sperl <kernel@martin.sperl.org> Acked-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Martin Sperl authored
[ Upstream commit c7de8500 ] This read of the fifo is a potential candidate for a race condition as the spi transfer is not necessarily finished and so can lead to an early read of the fifo that still misses data. So it has been removed. Fixes: 1ea29b39 ("spi: bcm2835aux: add bcm2835 auxiliary spi device...") Suggested-by:
-
Martin Sperl authored
[ Upstream commit 7188a6f0 ] Sharing more code between polling and interrupt-driven mode. Signed-off-by:
-
John S. Gruber authored
commit 29d9a0b5 upstream. Commit a90118c4 ("x86/boot: Save fields explicitly, zero out everything else") now zeroes the secure boot setting information (enabled/disabled/...) passed by the boot loader or by the kernel's EFI handover mechanism. The problem manifests itself with signed kernels using the EFI handoff protocol with grub and the kernel loses the information whether secure boot is enabled in the firmware, i.e., the log message "Secure boot enabled" becomes "Secure boot could not be determined". efi_main() arch/x86/boot/compressed/eboot.c sets this field early but it is subsequently zeroed by the above referenced commit. Include boot_params.secure_boot in the preserve field list. [ bp: restructure commit message and massage. ] Fixes: a90118c4 ("x86/boot: Save fields explicitly, zero out everything else") Signed-off-by:
John S. Gruber <JohnSGruber@gmail.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Mark Brown <broonie@kernel.org> Cc: stable <stable@vger.kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/CAPotdmSPExAuQcy9iAHqX3js_fc4mMLQOTr5RBGvizyCOPcTQQ@mail.gmail.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ka-Cheong Poon authored
[ Upstream commit 7d0a0658 ] The rds6_inc_info_copy() function has a couple struct members which are leaking stack information. The ->tos field should hold actual information and the ->flags field needs to be zeroed out. Fixes: 3eb45036 ("rds: add type of service(tos) infrastructure") Fixes: b7ff8b10 ("rds: Extend RDS API for IPv6 support") Reported-by:
黄ID蝴蝶 <butterflyhuangxx@gmail.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit fdfc5c85 ] Vladimir Rutsky reported stuck TCP sessions after memory pressure events. Edge Trigger epoll() user would never receive an EPOLLOUT notification allowing them to retry a sendmsg(). Jason tested the case of sk_stream_alloc_skb() returning NULL, but there are other paths that could lead both sendmsg() and sendpage() to return -1 (EAGAIN), with an empty skb queued on the write queue. This patch makes sure we remove this empty skb so that Jason code can detect that the queue is empty, and call sk->sk_write_space(sk) accordingly. Fixes: ce5ec440 ("tcp: ensure epoll edge trigger wakeup when write queue is empty") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Jason Baron <jbaron@akamai.com> Reported-by:
Vladimir Rutsky <rutsky@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 888a5c53 ] TCP associates tx timestamp requests with a byte in the bytestream. If merging skbs in tcp_mtu_probe, migrate the tstamp request. Similar to MSG_EOR, do not allow moving a timestamp from any segment in the probe but the last. This to avoid merging multiple timestamps. Tested with the packetdrill script at https://github.com/wdebruij/packetdrill/commits/mtu_probe-1 Link: http://patchwork.ozlabs.org/patch/1143278/#2232897 Fixes: 4ed2d765 ("net-timestamp: TCP timestamping") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Chen-Yu Tsai authored
[ Upstream commit 3b25528e ] The devicetree binding lists the phy phy as optional. As such, the driver should not bail out if it can't find a regulator. Instead it should just skip the remaining regulator related code and continue on normally. Skip the remainder of phy_power_on() if a regulator supply isn't available. This also gets rid of the bogus return code. Fixes: 2e12f536 ("net: stmmac: dwmac-rk: Use standard devicetree property for phy regulator") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 981471bd ] The net pointer in struct xt_tgdtor_param is not explicitly initialized therefore is still NULL when dereferencing it. So we have to find a way to pass the correct net pointer to ipt_destroy_target(). The best way I find is just saving the net pointer inside the per netns struct tcf_idrinfo, which could make this patch smaller. Fixes: 0c66dc1e ("netfilter: conntrack: register hooks in netns when needed by ruleset") Reported-and-tested-by: itugrok@yahoo.com Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Vlad Buslov authored
[ Upstream commit dbf47a2a ] Action sample doesn't properly handle psample_group pointer in overwrite case. Following issues need to be fixed: - In tcf_sample_init() function RCU_INIT_POINTER() is used to set s->psample_group, even though we neither setting the pointer to NULL, nor preventing concurrent readers from accessing the pointer in some way. Use rcu_swap_protected() instead to safely reset the pointer. - Old value of s->psample_group is not released or deallocated in any way, which results resource leak. Use psample_group_put() on non-NULL value obtained with rcu_swap_protected(). - The function psample_group_put() that released reference to struct psample_group pointed by rcu-pointer s->psample_group doesn't respect rcu grace period when deallocating it. Extend struct psample_group with rcu head and use kfree_rcu when freeing it. Fixes: 5c5670fa ("net/sched: Introduce sample tc action") Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
-
Feng Sun authored
[ Upstream commit 2c1644cf ] After commit baeababb ("tun: return NET_XMIT_DROP for dropped packets"), when tun_net_xmit drop packets, it will free skb and return NET_XMIT_DROP, netpoll_send_skb_on_dev will run into following use after free cases: 1. retry netpoll_start_xmit with freed skb; 2. queue freed skb in npinfo->txq. queue_process will also run into use after free case. hit netpoll_send_skb_on_dev first case with following kernel log: [ 117.864773] kernel BUG at mm/slub.c:306! [ 117.864773] invalid opcode: 0000 [#1] SMP PTI [ 117.864774] CPU: 3 PID: 2627 Comm: loop_printmsg Kdump: loaded Tainted: P OE 5.3.0-050300rc5-generic #201908182231 [ 117.864775] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 117.864775] RIP: 0010:kmem_cache_free+0x28d/0x2b0 [ 117.864781] Call Trace: [ 117.864781] ? tun_net_xmit+0x21c/0x460 [ 117.864781] kfree_skbmem+0x4e/0x60 [ 117.864782] kfree_skb+0x3a/0xa0 [ 117.864782] tun_net_xmit+0x21c/0x460 [ 117.864782] netpoll_start_xmit+0x11d/0x1b0 [ 117.864788] netpoll_send_skb_on_dev+0x1b8/0x200 [ 117.864789] __br_forward+0x1b9/0x1e0 [bridge] [ 117.864789] ? skb_clone+0x53/0xd0 [ 117.864790] ? __skb_clone+0x2e/0x120 [ 117.864790] deliver_clone+0x37/0x50 [bridge] [ 117.864790] maybe_deliver+0x89/0xc0 [bridge] [ 117.864791] br_flood+0x6c/0x130 [bridge] [ 117.864791] br_dev_xmit+0x315/0x3c0 [bridge] [ 117.864792] netpoll_start_xmit+0x11d/0x1b0 [ 117.864792] netpoll_send_skb_on_dev+0x1b8/0x200 [ 117.864792] netpoll_send_udp+0x2c6/0x3e8 [ 117.864793] write_msg+0xd9/0xf0 [netconsole] [ 117.864793] console_unlock+0x386/0x4e0 [ 117.864793] vprintk_emit+0x17e/0x280 [ 117.864794] vprintk_default+0x29/0x50 [ 117.864794] vprintk_func+0x4c/0xbc [ 117.864794] printk+0x58/0x6f [ 117.864795] loop_fun+0x24/0x41 [printmsg_loop] [ 117.864795] kthread+0x104/0x140 [ 117.864795] ? 0xffffffffc05b1000 [ 117.864796] ? kthread_park+0x80/0x80 [ 117.864796] ret_from_fork+0x35/0x40 Signed-off-by:
Feng Sun <loyou85@gmail.com> Signed-off-by:
Xiaojun Zhao <xiaojunzhao141@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit a84d0164 ] Similar to the fix done for IPv4 in commit e5b1c6c6 ("igmp: fix memory leak in igmpv3_del_delrec()"), we need to make sure mca_tomb and mca_sources are not blindly overwritten. Using swap() then a call to ip6_mc_clear_src() will take care of the missing free. BUG: memory leak unreferenced object 0xffff888117d9db00 (size 64): comm "syz-executor247", pid 6918, jiffies 4294943989 (age 25.350s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 fe 88 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000005b463030>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<000000005b463030>] slab_post_alloc_hook mm/slab.h:522 [inline] [<000000005b463030>] slab_alloc mm/slab.c:3319 [inline] [<000000005b463030>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3548 [<00000000939cbf94>] kmalloc include/linux/slab.h:552 [inline] [<00000000939cbf94>] kzalloc include/linux/slab.h:748 [inline] [<00000000939cbf94>] ip6_mc_add1_src net/ipv6/mcast.c:2236 [inline] [<00000000939cbf94>] ip6_mc_add_src+0x31f/0x420 net/ipv6/mcast.c:2356 [<00000000d8972221>] ip6_mc_source+0x4a8/0x600 net/ipv6/mcast.c:449 [<000000002b203d0d>] do_ipv6_setsockopt.isra.0+0x1b92/0x1dd0 net/ipv6/ipv6_sockglue.c:748 [<000000001f1e2d54>] ipv6_setsockopt+0x89/0xd0 net/ipv6/ipv6_sockglue.c:944 [<00000000c8f7bdf9>] udpv6_setsockopt+0x4e/0x90 net/ipv6/udp.c:1558 [<000000005a9a0c5e>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3139 [<00000000910b37b2>] __sys_setsockopt+0x10f/0x220 net/socket.c:2084 [<00000000e9108023>] __do_sys_setsockopt net/socket.c:2100 [inline] [<00000000e9108023>] __se_sys_setsockopt net/socket.c:2097 [inline] [<00000000e9108023>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2097 [<00000000f4818160>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:296 [<000000008d367e8f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1666d49e ("mld: do not remove mld souce list info when set link down") Fixes: 9c8bb163 ("igmp, mld: Fix memory leak in igmpv3/mld_del_delrec()") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
- 06 Sep, 2019 20 commits
-
-
Greg Kroah-Hartman authored
-
Benjamin Tissoires authored
This reverts commit 3d180fe5 which is commit 883a2a80 upstream. This patch depends on an other series: https://patchwork.kernel.org/project/linux-input/list/?series=122327&state=%2A&archive=both It was a mistake to backport it in the v5.2 branch, as there is a high chance we encounter a touchpad that needs the series above. Link: https://bugzilla.kernel.org/show_bug.cgi?id=204733 Link: https://bugzilla.kernel.org/show_bug.cgi?id=204771Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit 714a8438 which is commit 40aa5383 upstream. Mark Brown writes: I nacked this patch when Sasha posted it - it only improves diagnostics and might make systems that worked by accident break since it turns things into a hard failure, it won't make anything that didn't work previously work. Reported-by:
-
Stanislaw Gruszka authored
commit 8f2d163c upstream. On some machines mt76x0u firmware can hung during resume, what result on messages like below: [ 475.480062] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 475.990066] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 475.990075] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 476.500003] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 476.500012] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.010046] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 477.010055] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.529997] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 477.530006] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.824907] mt76x0 1-8:1.0: Error: send MCU cmd failed:-71 [ 477.824916] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.825029] usb 1-8: USB disconnect, device number 6 and possible whole system freeze. This can be avoided, if we do not perform mt76x0_chip_onoff() reset. Cc: stable@vger.kernel.org Fixes: 134b2d0d ("mt76x0: init files") Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Greg Kroah-Hartman authored
I incorrectly merged commit 31a2fbb3 ("x86/ptrace: Fix possible spectre-v1 in ptrace_get_debugreg()") when backporting it, as was graciously pointed out at https://grsecurity.net/teardown_of_a_failed_linux_lts_spectre_fix.php Resolve the upstream difference with the stable kernel merge to properly protect things. Reported-by:
Brad Spengler <spender@grsecurity.net> Cc: Dianzhang Chen <dianzhangchen0@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <bp@alien8.de> Cc: <hpa@zytor.com> Signed-off-by:
-
Andrew Cooks authored
[ Upstream commit c7c06a15 ] Family 16h Model 30h SMBus controller needs the same port selection fix as described and fixed in commit 0fe16195 ("i2c: piix4: Fix SMBus port selection for AMD Family 17h chips") commit 6befa3fd ("i2c: piix4: Support alternative port selection register") also fixed the port selection for Hudson2, but unfortunately this is not the exact same device and the AMD naming and PCI Device IDs aren't particularly helpful here. The SMBus port selection register is common to the following Families and models, as documented in AMD's publicly available BIOS and Kernel Developer Guides: 50742 - Family 15h Model 60h-6Fh (PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) 55072 - Family 15h Model 70h-7Fh (PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) 52740 - Family 16h Model 30h-3Fh (PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) The Hudson2 PCI Device ID (PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) is shared between Bolton FCH and Family 16h Model 30h, but the location of the SmBus0Sel port selection bits are different: 51192 - Bolton Register Reference Guide We distinguish between Bolton and Family 16h Model 30h using the PCI Revision ID: Bolton is device 0x780b, revision 0x15 Family 16h Model 30h is device 0x780b, revision 0x1F Family 15h Model 60h and 70h are both device 0x790b, revision 0x4A. The following additional public AMD BKDG documents were checked and do not share the same port selection register: 42301 - Family 15h Model 00h-0Fh doesn't mention any 42300 - Family 15h Model 10h-1Fh doesn't mention any 49125 - Family 15h Model 30h-3Fh doesn't mention any 48751 - Family 16h Model 00h-0Fh uses the previously supported index register SB800_PIIX4_PORT_IDX_ALT at 0x2e Signed-off-by:
Andrew Cooks <andrew.cooks@opengear.com> Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org [v4.6+] Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit eb2c50da ] If the attempt to resend the I/O results in no bytes being read/written, we must ensure that we report the error. Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Fixes: 0a00b77b ("nfs: mirroring support for direct io") Cc: stable@vger.kernel.org # v3.20+ Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit df3accb8 ] Allow the caller to pass error information when cleaning up a failed I/O request so that we can conditionally take action to cancel the request altogether if the error turned out to be fatal. Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit f4340e93 ] If the attempt to resend the pages fails, we need to ensure that we clean up those pages that were not transmitted. Fixes: d600ad1f ("NFS41: pop some layoutget errors to application") Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 078b5fd9 ] In several places we're just moving the struct nfs_page from one list to another by first removing from the existing list, then adding to the new one. Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 82e40f55 ] A guest is not allowed to inject a SGI (or clear its pending state) by writing to GICD_ISPENDR0 (resp. GICD_ICPENDR0), as these bits are defined as WI (as per ARM IHI 0048B 4.3.7 and 4.3.8). Make sure we correctly emulate the architecture. Fixes: 96b29800 ("KVM: arm/arm64: vgic-new: Add PENDING registers handlers") Cc: stable@vger.kernel.org # 4.7+ Reported-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Heyi Guo authored
[ Upstream commit d4a8061a ] If the ap_list is longer than 256 entries, merge_final() in list_sort() will call the comparison callback with the same element twice, causing a deadlock in vgic_irq_cmp(). Fix it by returning early when irqa == irqb. Cc: stable@vger.kernel.org # 4.7+ Fixes: 8e444745 ("KVM: arm/arm64: vgic-new: Add IRQ sorting") Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
Heyi Guo <guoheyi@huawei.com> [maz: massaged commit log and patch, added Fixes and Cc-stable] Signed-off-by:
-
Alexey Kardashevskiy authored
[ Upstream commit ddfd151f ] H_PUT_TCE_INDIRECT handlers receive a page with up to 512 TCEs from a guest. Although we verify correctness of TCEs before we do anything with the existing tables, there is a small window when a check in kvmppc_tce_validate might pass and right after that the guest alters the page of TCEs, causing an early exit from the handler and leaving srcu_read_lock(&vcpu->kvm->srcu) (virtual mode) or lock_rmap(rmap) (real mode) locked. This fixes the bug by jumping to the common exit code with an appropriate unlock. Cc: stable@vger.kernel.org # v4.11+ Fixes: 121f80ba ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO") Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Denis Kenzior authored
commit f8b43c5c upstream. The noencrypt flag was intended to be set if the "frame was received unencrypted" according to include/uapi/linux/nl80211.h. However, the current behavior is opposite of this. Cc: stable@vger.kernel.org Fixes: 018f6fbf ("mac80211: Send control port frames over nl80211") Signed-off-by:
Denis Kenzior <denkenz@gmail.com> Link: https://lore.kernel.org/r/20190827224120.14545-3-denkenz@gmail.comSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Denis Kenzior authored
commit c8a41c6a upstream. In ieee80211_deliver_skb_to_local_stack intercepts EAPoL frames if mac80211 is configured to do so and forwards the contents over nl80211. During this process some additional data is also forwarded, including whether the frame was received encrypted or not. Unfortunately just prior to the call to ieee80211_deliver_skb_to_local_stack, skb->cb is cleared, resulting in incorrect data being exposed over nl80211. Fixes: 018f6fbf ("mac80211: Send control port frames over nl80211") Cc: stable@vger.kernel.org Signed-off-by:
-
Johannes Berg authored
commit 5fd2f91a upstream. If TDLS station addition is rejected, the sta memory is leaked. Avoid this by moving the check before the allocation. Cc: stable@vger.kernel.org Fixes: 7ed52853 ("mac80211: don't initiate TDLS connection if station is not associated to AP") Link: https://lore.kernel.org/r/20190801073033.7892-1-johannes@sipsolutions.netSigned-off-by:
-
Hodaszi, Robert authored
commit 0d31d4db upstream. This reverts commit 96cce12f ("cfg80211: fix processing world regdomain when non modular"). Re-triggering a reg_process_hint with the last request on all events, can make the regulatory domain fail in case of multiple WiFi modules. On slower boards (espacially with mdev), enumeration of the WiFi modules can end up in an intersected regulatory domain, and user cannot set it with 'iw reg set' anymore. This is happening, because: - 1st module enumerates, queues up a regulatory request - request gets processed by __reg_process_hint_driver(): - checks if previous was set by CORE -> yes - checks if regulator domain changed -> yes, from '00' to e.g. 'US' -> sends request to the 'crda' - 2nd module enumerates, queues up a regulator request (which triggers the reg_todo() work) - reg_todo() -> reg_process_pending_hints() sees, that the last request is not processed yet, so it tries to process it again. __reg_process_hint driver() will run again, and: - checks if the last request's initiator was the core -> no, it was the driver (1st WiFi module) - checks, if the previous initiator was the driver -> yes - checks if the regulator domain changed -> yes, it was '00' (set by core, and crda call did not return yet), and should be changed to 'US' ------> __reg_process_hint_driver calls an intersect Besides, the reg_process_hint call with the last request is meaningless since the crda call has a timeout work. If that timeout expires, the first module's request will lost. Cc: stable@vger.kernel.org Fixes: 96cce12f ("cfg80211: fix processing world regdomain when non modular") Signed-off-by:
Robert Hodaszi <robert.hodaszi@digi.com> Link: https://lore.kernel.org/r/20190614131600.GA13897@a1-hrSigned-off-by:
-
Gary R Hook authored
commit 5871cd93 upstream. If a CCP is unconfigured (e.g. there are no available queues) then there will be no data structures allocated for the device. Thus, we must check for validity of a pointer before trying to access structure members. Fixes: 720419f0 ("crypto: ccp - Introduce the AMD Secure Processor device") Cc: <stable@vger.kernel.org> Signed-off-by:
Gary R Hook <gary.hook@amd.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Nadav Amit authored
commit ba03a9bb upstream. Francois reported that VMware balloon gets stuck after a balloon reset, when the VMCI doorbell is removed. A similar error can occur when the balloon driver is removed with the following splat: [ 1088.622000] INFO: task modprobe:3565 blocked for more than 120 seconds. [ 1088.622035] Tainted: G W 5.2.0 #4 [ 1088.622087] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1088.622205] modprobe D 0 3565 1450 0x00000000 [ 1088.622210] Call Trace: [ 1088.622246] __schedule+0x2a8/0x690 [ 1088.622248] schedule+0x2d/0x90 [ 1088.622250] schedule_timeout+0x1d3/0x2f0 [ 1088.622252] wait_for_completion+0xba/0x140 [ 1088.622320] ? wake_up_q+0x80/0x80 [ 1088.622370] vmci_resource_remove+0xb9/0xc0 [vmw_vmci] [ 1088.622373] vmci_doorbell_destroy+0x9e/0xd0 [vmw_vmci] [ 1088.622379] vmballoon_vmci_cleanup+0x6e/0xf0 [vmw_balloon] [ 1088.622381] vmballoon_exit+0x18/0xcc8 [vmw_balloon] [ 1088.622394] __x64_sys_delete_module+0x146/0x280 [ 1088.622408] do_syscall_64+0x5a/0x130 [ 1088.622410] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1088.622415] RIP: 0033:0x7f54f62791b7 [ 1088.622421] Code: Bad RIP value. [ 1088.622421] RSP: 002b:00007fff2a949008 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 1088.622426] RAX: ffffffffffffffda RBX: 000055dff8b55d00 RCX: 00007f54f62791b7 [ 1088.622426] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055dff8b55d68 [ 1088.622427] RBP: 000055dff8b55d00 R08: 00007fff2a947fb1 R09: 0000000000000000 [ 1088.622427] R10: 00007f54f62f5cc0 R11: 0000000000000206 R12: 000055dff8b55d68 [ 1088.622428] R13: 0000000000000001 R14: 000055dff8b55d68 R15: 00007fff2a94a3f0 The cause for the bug is that when the "delayed" doorbell is invoked, it takes a reference on the doorbell entry and schedules work that is supposed to run the appropriate code and drop the doorbell entry reference. The code ignores the fact that if the work is already queued, it will not be scheduled to run one more time. As a result one of the references would not be dropped. When the code waits for the reference to get to zero, during balloon reset or module removal, it gets stuck. Fix it. Drop the reference if schedule_work() indicates that the work is already queued. Note that this bug got more apparent (or apparent at all) due to commit ce664331 ("vmw_balloon: VMCI_DOORBELL_SET does not check status"). Fixes: 83e2ec76 ("VMCI: doorbell implementation.") Reported-by:
Francois Rigault <rigault.francois@gmail.com> Cc: Jorgen Hansen <jhansen@vmware.com> Cc: Adit Ranadive <aditr@vmware.com> Cc: Alexios Zavras <alexios.zavras@intel.com> Cc: Vishnu DASA <vdasa@vmware.com> Cc: stable@vger.kernel.org Signed-off-by:
Nadav Amit <namit@vmware.com> Reviewed-by:
Vishnu Dasa <vdasa@vmware.com> Link: https://lore.kernel.org/r/20190820202638.49003-1-namit@vmware.comSigned-off-by:
-
