This can be local to mach-omap2.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This is only used by omap1.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This is only used by omap1.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This is only used by omap1.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This is only used by omap1.

And to fix things properly, this should not be included
from the drivers at all.
Acked-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Cc: linux-mtd@lists.infradead.org
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Liam Girdwood <lrg@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Tony Lindgren <tony@atomide.com>

We are moving omap2+ to use the device tree based pinctrl-single.c
and will be removing the old mux framework. This will remove the
omap1 specific parts from plat-omap.
Acked-by: Felipe Balbi <balbi@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-usb@vger.kernel.org
Cc: linux-pcmcia@lists.infradead.org
Cc: spi-devel-general@lists.sourceforge.net
Signed-off-by: Tony Lindgren <tony@atomide.com>

This is no longer needed.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This is no longer needed.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the omap include directories
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: "Benoît Cousson" <b-cousson@ti.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Jarkko Nikula <jarkko.nikula@bitmer.com>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Jean Pihet <j-pihet@ti.com>
Cc: J Keerthy <j-keerthy@ti.com>
Cc: linux-omap@vger.kernel.org

Merge tag 'cleanup-fixes-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

From Tony Lindgren:

These fixes are needed to fix non-omap build breakage for
twl-core driver and to fix omap1_defconfig compile when
led driver changes and omap sparse IRQ changes are merged
together. Also fix warnings for omaps not using pinctrl
framework yet.

* tag 'cleanup-fixes-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP1: Include gpio-omap.h for board-h2 and board-h3
  ARM: OMAP2+: Enable pinctrl dummy states
  mfd: Fix compile for twl-core.c by removing cpu_is_omap usage

Merge of the LED related changes with omap sparse IRQ and
hardware.h related changes causes a build issue otherwise:

arch/arm/mach-omap1/board-h2.c:319: error: implicit declaration of function ‘OMAP_MPUIO’
arch/arm/mach-omap1/board-h2.c:319: error: initializer element is not constant
arch/arm/mach-omap1/board-h2.c:319: error: (near initialization for ‘h2_gpio_led_pins[1].gpio’)
Signed-off-by: Tony Lindgren <tony@atomide.com>

Enable pinctrl dummy states for all OMAP platforms that don't
populate DT. This allows drivers to be converted to pinctrl
and not generate new warnings on platforms that do not provide
pinctrl data. These platforms already have pinmuxes configured
before the drivers probe.
Signed-off-by: Matt Porter <mporter@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Commit 7d7e1eba (ARM: OMAP2+: Prepare for irqs.h removal) broke
compile for non-omap as include plat/cpu.h was added. This header
was indirectly included earlier when SPARSE_IRQ was not set, but
does not exist on most platforms.

Fix the problem by removing the cpu_is_omap usage that should
not exist in drivers at all. We can do this by adding proper
clock aliases for the twl-core.c drivers, and drop separate
handling for cases when clock framework is not available as
the behaviour will stay the same.

Note that we need to add a platform device to avoid using the
i2c provided names that may be different on various omaps.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Walmsley <paul@pwsan.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge tag 'omap-cleanup-makefile-sparse-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

From Tony Lindgren:
From Paul Walmsley <paul@pwsan.com>:

Clean up and standardize several parts of
arch/arm/mach-omap2/Makefile.  Beyond readability and diffstat
improvements, the series should reduce the risk of conflicts during
future cleanups by ensuring related lines are in the same section of the
Makefile.

smatch and string-wrapping cleanups for the OMAP subarch code.

These changes fix some of the more meaningful warnings that smatch
returns for the OMAP subarch code, and unwraps strings that are
wrapped at the 80-column boundary, to conform with the current
practice.

* tag 'omap-cleanup-makefile-sparse-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: unwrap strings
  ARM: OMAP: clean up some smatch warnings, fix some printk(KERN_ERR ...
  ARM: OMAP2+: clean up PRCM sections of the Makefile
  ARM: OMAP2+: clean up OMAP clock Makefile sections
  ARM: OMAP2+: clean up OMAP4 PRM & sleep build directives in Makefile
  ARM: OMAP2+: move MPU INTCPS, secure monitor, SDRC build directives in Makefile
  ARM: OMAP2+: clean up omap_hwmod.o build directives in Makefile
  ARM: OMAP2+: clean up whitespace in Makefile

Merge tag 'omap-cleanup-sparseirq-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

From Tony Lindgren:

This branch contains changes needed to make omap2+
work properly with sparse IRQ. It also removes
dependencies to mach/hardware.h. These help moving
things towards ARM single zImage support.

This branch is based on a commit in tty-next
branch with omap-devel-gpmc-fixed-for-v3.7 and
cleanup-omap-tags-for-v3.7 merged in to keep things
compiling and sort out some merge conflicts.

* tag 'omap-cleanup-sparseirq-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP1: Move SoC specific headers from plat to mach for omap1
  ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2
  ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+
  ARM: OMAP: Remove unused old gpio-switch.h
  ARM: OMAP1: Move plat/irqs.h to mach/irqs.h
  ARM: OMAP2+: Remove hardcoded IRQs and enable SPARSE_IRQ
  ARM: OMAP2+: Prepare for irqs.h removal
  W1: OMAP HDQ1W: Remove dependencies to mach/hardware.h
  Input: omap-keypad: Remove dependencies to mach includes
  ARM: OMAP: Move gpio.h to include/linux/platform_data
  ARM: OMAP2+: Remove hardcoded twl4030 gpio_base, irq_base and irq_end
  ARM: OMAP2+: Remove unused nand_irq for GPMC
  ARM: OMAP2+: Make INTCPS_NR_IRQS local for mach-omap2/irq.c
  ARM: OMAP1: Define OMAP1_INT_I2C locally
  ARM: OMAP1: Move define of OMAP_LCD_DMA to dma.h

This part of the tty tree (unfortunately with all the preceding patches
as well) is a dependency for some of the OMAP cleanups, so we've pulled
it in as a dependency based on agreement with Greg.
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'cleanup-omap-tags-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

From Tony Lindgren:

Remove the ancient omap specific atags that are no longer needed.

At some point we were planning to pass the bootloader information
with custom atags that did not work out too well.

There's no need for these any longer as the kernel has been booting
fine without them for quite some time. And Now we have device tree
support that can be used instead.

* tag 'cleanup-omap-tags-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: remove plat/board.h file
  ARM: OMAP: move debug_card_init() function
  ARM: OMAP1: move lcd pdata out of arch/arm/*
  ARM: OMAP1: move omap1_bl pdata out of arch/arm/*
  ARM: OMAP: remove the omap custom tags
  ARM: OMAP1: remove the crystal type tag parsing
  ARM: OMAP: remove the sti console workaround
  ARM: OMAP: omap3evm: cleanup revision bits
  ARM: OMAP: cleanup struct omap_board_config_kernel
  + sync to 3.6-rc5

Merge tag 'omap-devel-gpmc-fixed-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

From Tony Lindgren:

Changes for GPMC (General Purpose Memory Controller) that take it
closer for being just a regular device driver.

* tag 'omap-devel-gpmc-fixed-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  mtd: nand: omap2: use gpmc provided irqs
  ARM: OMAP2+: gpmc-nand: Modify Interrupt handling
  ARM: OMAP2+: gpmc: Modify interrupt handling
  mtd: onenand: omap2: obtain memory from resource
  mtd: nand: omap2: obtain memory from resource
  ARM: OMAP2+: gpmc-onenand: provide memory as resource
  ARM: OMAP2+: gpmc-nand: update resource with memory
  mtd: nand: omap2: handle nand on gpmc
  ARM: OMAP2+: gpmc-nand: update gpmc-nand regs
  ARM: OMAP2+: gpmc: update nand register helper

Merge tag 'tegra-for-3.7-board-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup

From Stephen Warren:

ARM: tegra: remove board files

This branch removes all remaining board files for Tegra; booting is
now through device tree only.

Related, the Harmony DT is augmented with regulators, since this allows
removal of board-harmony-power.c; no other boards had regulator support.
This change depends on an enhancement to the TPS6586x regulator driver,
hence the dependency mentioned below.

* tag 'tegra-for-3.7-board-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ARM: dt: tegra: harmony: configure power off
  ARM: dt: tegra: harmony: add regulators
  ARM: tegra: remove board (but not DT) support for Harmony
  ARM: tegra: remove board (but not DT) support for Paz00
  ARM: tegra: remove board (but not DT) support for TrimSlice

Pull in a dependent branch from Mark Brown's regulator tree for the tegra/cleanup branch.

* depends/tps6589x-dt:
  regulator: tps6586x: add support for SYS rail

Merge tag 'tegra-for-3.7-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup

From Stephen Warren:

This branch contains a few early cleanups; consistent use of IO_ADDRESS,
always selecting USE_OF since we're converting to device-tree-only this
merge window, and removing includes of some header files as part of
working towards single zImage.

* tag 'tegra-for-3.7-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  mmc: tegra: remove useless include of <mach/*.h>
  gpio: tegra: remove useless includes of <mach/*.h>
  ARM: tegra: remove duplicate select USE_OF
  ARM: tegra: use IO_ADDRESS for getting virtual address

Merge tag 'msm-cleanup-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into next/cleanup

From David Brown:

Various cleanups for the msm targets.  Most of this is removing dead
code, along with a fix of a sparse warning, a list fix from a semantic
patch, and marking some functions as static.

* tag 'msm-cleanup-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm:
  ARM: msm: Remove uncompiled board-msm7x27
  ARM: msm: Remove unused acpuclock-arm11
  ARM: msm: dma: use list_move_tail instead of list_del/list_add_tail
  ARM: msm: Fix sparse warnings due to incorrect type
  ARM: msm: Remove unused idle.c
  ARM: msm: clock-pcom: Mark functions static
  ARM: msm: Remove msm_hw_reset_hook

ARM i.MX cleanup patches

* tag 'imx-cleanup' of git://git.pengutronix.de/git/imx/linux-2.6:
  ARM i.MX53 clk: Fix ldb parent clocks
  serial/imx: fix IMX UART macro usage to reflect correct processor
  ARM: i.MX remove last leftovers from legacy clock support
  ARM: i.MX clk pllv1: move mxc_decode_pll code to its user
  ARM: imx27-phytec-phycore: Fix I2C EEPROM address
  ARM i.MX mx2_camera: Remove MX2_CAMERA_SWAP16 and MX2_CAMERA_PACK_DIR_MSB flags.
  ARM i.MX: remove duplicated include from clk-imx21.c
  ARM: plat-mxc: Remove unused imx_ioremap

Add DT property to tell the TPS6586x that it should provide the
pm_power_off() implementation. This allows "shutdown" to work.
Signed-off-by: Stephen Warren <swarren@nvidia.com>

Harmony uses a TPS6586x regulator. Instantiate this, and hook up a
couple of fixed GPIO-controlled regulators too.

Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com>
and converted to Harmony.

swarren made the following changes:
* Added ldo0 regulator configuration to device tree, and updated
  board-harmony-pcie.c for the new regulator name.
* Fixed vdd_1v05's voltage from 10.5V to 1.05V.
* Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at
  run-time from device tree instead of hard-coding it.
* Removed board-harmony{-power.c,.h} now that they're unused.
* Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks
  this GPIO for now. This will be fixed when the PCIe driver is re-
  written as a driver. The code can't regulator_get("vdd_1v05") right
  now, because the vdd_1v05 regulator's probe gets deferred due to its
  supply being the PMIC, which gets probed after the regulator the first
  time around, and this dependency is only resolved by repeated probing,
  which happens when deferred_probe_initcall() is called, which happens
  in a late initcall, whose runtime order relative to harmony_pcie_init()
  is undefined, since that's also called from a late initcall.
* Removed unused harmony_pcie_initcall().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

Harmony can be booted using device tree with equal functionality as when
booted using a board file. Remove as much of the board file as is
possible, since it's no longer needed.

Two special-cases are still left in board-dt-tegra20.c, since the Tegra
PCIe driver doesn't support device tree yet, and the Harmony .dts file
doesn't yet describe regulators which are needed for PCIe. This logic is
now enabled unconditionally rather than via CONFIG_MACH_HARMONY. While
this is more code than other boards, it's still unlikely to be much of a
problem, and both regulators and PCIe should be supported via device tree
in the near future, allowing the remaining code to be removed.
Signed-off-by: Stephen Warren <swarren@nvidia.com>

Paz00 (Toshiba AC100) can be booted using device tree with equal
functionality as when booted using a board file. Remove as much of the
board file as is possible, since it's no longer needed.

One special-case is still left in board-dt-tegra20.c, since there is no
way to create a WiFi rfkill device from device tree yet. This logic is
now enabled unconditionally rather than via CONFIG_MACH_PAZ00. The extra
cases where it's enabled (.configs which did not enable Paz00 support)
shouldn't impact much since the amount of code is tiny.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-By: Marc Dietrich <marvin24@gmx.de>

TrimSlice can be booted using device tree with equal functionality as
when booted using a board file. Remove the board file since it's no
longer needed.

One special-case is still left in board-dt-tegra20.c, since the Tegra
PCIe driver doesn't support device tree yet. This logic is now enabled
by CONFIG_TEGRA_PCI rather than via CONFIG_MACH_TRIMSLICE. The extra
cases where it's enabled (.configs which did not enable TrimSlice
support) shouldn't impact much since the amount of code is tiny.
Signed-off-by: Stephen Warren <swarren@nvidia.com>

This board file has never been compiled. Let's just remove it
along with the one Kconfig reference to it in io.c.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>