1. 07 Apr, 2017 8 commits
    • Bart Van Assche's avatar
      dm rq: Avoid that request processing stalls sporadically · 6077c2d7
      Bart Van Assche authored
      While running the srp-test software I noticed that request
      processing stalls sporadically at the beginning of a test, namely
      when mkfs is run against a dm-mpath device. Every time when that
      happened the following command was sufficient to resume request
      processing:
      
          echo run >/sys/kernel/debug/block/dm-0/state
      
      This patch avoids that such request processing stalls occur. The
      test I ran is as follows:
      
          while srp-test/run_tests -d -r 30 -t 02-mq; do :; done
      Signed-off-by: default avatarBart Van Assche <bart.vanassche@sandisk.com>
      Cc: Mike Snitzer <snitzer@redhat.com>
      Cc: dm-devel@redhat.com
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      6077c2d7
    • Bart Van Assche's avatar
      scsi: Avoid that SCSI queues get stuck · 36e3cf27
      Bart Van Assche authored
      If a .queue_rq() function returns BLK_MQ_RQ_QUEUE_BUSY then the block
      driver that implements that function is responsible for rerunning the
      hardware queue once requests can be queued again successfully.
      
      commit 52d7f1b5 ("blk-mq: Avoid that requeueing starts stopped
      queues") removed the blk_mq_stop_hw_queue() call from scsi_queue_rq()
      for the BLK_MQ_RQ_QUEUE_BUSY case. Hence change all calls to functions
      that are intended to rerun a busy queue such that these examine all
      hardware queues instead of only stopped queues.
      
      Since no other functions than scsi_internal_device_block() and
      scsi_internal_device_unblock() should ever stop or restart a SCSI
      queue, change the blk_mq_delay_queue() call into a
      blk_mq_delay_run_hw_queue() call.
      
      Fixes: commit 52d7f1b5 ("blk-mq: Avoid that requeueing starts stopped queues")
      Fixes: commit 7e79dadc ("blk-mq: stop hardware queue in blk_mq_delay_queue()")
      Signed-off-by: default avatarBart Van Assche <bart.vanassche@sandisk.com>
      Cc: Martin K. Petersen <martin.petersen@oracle.com>
      Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
      Cc: Christoph Hellwig <hch@lst.de>
      Cc: Hannes Reinecke <hare@suse.de>
      Cc: Sagi Grimberg <sagi@grimberg.me>
      Cc: Long Li <longli@microsoft.com>
      Cc: K. Y. Srinivasan <kys@microsoft.com>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      36e3cf27
    • Bart Van Assche's avatar
      blk-mq: Introduce blk_mq_delay_run_hw_queue() · 7587a5ae
      Bart Van Assche authored
      Introduce a function that runs a hardware queue unconditionally
      after a delay. Note: there is already a function that stops and
      restarts a hardware queue after a delay, namely blk_mq_delay_queue().
      
      This function will be used in the next patch in this series.
      Signed-off-by: default avatarBart Van Assche <bart.vanassche@sandisk.com>
      Cc: Christoph Hellwig <hch@lst.de>
      Cc: Hannes Reinecke <hare@suse.de>
      Cc: Long Li <longli@microsoft.com>
      Cc: K. Y. Srinivasan <kys@microsoft.com>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      7587a5ae
    • Omar Sandoval's avatar
      blk-mq: remap queues when adding/removing hardware queues · ebe8bddb
      Omar Sandoval authored
      blk_mq_update_nr_hw_queues() used to remap hardware queues, which is the
      behavior that drivers expect. However, commit 4e68a011 changed
      blk_mq_queue_reinit() to not remap queues for the case of CPU
      hotplugging, inadvertently making blk_mq_update_nr_hw_queues() not remap
      queues as well. This breaks, for example, NBD's multi-connection mode,
      leaving the added hardware queues unused. Fix it by making
      blk_mq_update_nr_hw_queues() explicitly remap the queues.
      
      Fixes: 4e68a011 ("blk-mq: don't redistribute hardware queues on a CPU hotplug event")
      Reviewed-by: default avatarKeith Busch <keith.busch@intel.com>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Reviewed-by: default avatarSagi Grimberg <sagi@grimberg.me>
      Signed-off-by: default avatarOmar Sandoval <osandov@fb.com>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      ebe8bddb
    • Omar Sandoval's avatar
      blk-mq-sched: fix crash in switch error path · 54d5329d
      Omar Sandoval authored
      In elevator_switch(), if blk_mq_init_sched() fails, we attempt to fall
      back to the original scheduler. However, at this point, we've already
      torn down the original scheduler's tags, so this causes a crash. Doing
      the fallback like the legacy elevator path is much harder for mq, so fix
      it by just falling back to none, instead.
      Signed-off-by: default avatarOmar Sandoval <osandov@fb.com>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      54d5329d
    • Omar Sandoval's avatar
      blk-mq-sched: set up scheduler tags when bringing up new queues · 93252632
      Omar Sandoval authored
      If a new hardware queue is added at runtime, we don't allocate scheduler
      tags for it, leading to a crash. This hooks up the scheduler framework
      to blk_mq_{init,exit}_hctx() to make sure everything gets properly
      initialized/freed.
      Signed-off-by: default avatarOmar Sandoval <osandov@fb.com>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      93252632
    • Omar Sandoval's avatar
      blk-mq-sched: refactor scheduler initialization · 6917ff0b
      Omar Sandoval authored
      Preparation cleanup for the next couple of fixes, push
      blk_mq_sched_setup() and e->ops.mq.init_sched() into a helper.
      Signed-off-by: default avatarOmar Sandoval <osandov@fb.com>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      6917ff0b
    • Omar Sandoval's avatar
      blk-mq: use the right hctx when getting a driver tag fails · 81380ca1
      Omar Sandoval authored
      While dispatching requests, if we fail to get a driver tag, we mark the
      hardware queue as waiting for a tag and put the requests on a
      hctx->dispatch list to be run later when a driver tag is freed. However,
      blk_mq_dispatch_rq_list() may dispatch requests from multiple hardware
      queues if using a single-queue scheduler with a multiqueue device. If
      blk_mq_get_driver_tag() fails, it doesn't update the hardware queue we
      are processing. This means we end up using the hardware queue of the
      previous request, which may or may not be the same as that of the
      current request. If it isn't, the wrong hardware queue will end up
      waiting for a tag, and the requests will be on the wrong dispatch list,
      leading to a hang.
      
      The fix is twofold:
      
      1. Make sure we save which hardware queue we were trying to get a
         request for in blk_mq_get_driver_tag() regardless of whether it
         succeeds or not.
      2. Make blk_mq_dispatch_rq_list() take a request_queue instead of a
         blk_mq_hw_queue to make it clear that it must handle multiple
         hardware queues, since I've already messed this up on a couple of
         occasions.
      
      This didn't appear in testing with nvme and mq-deadline because nvme has
      more driver tags than the default number of scheduler tags. However,
      with the blk_mq_update_nr_hw_queues() fix, it showed up with nbd.
      Signed-off-by: default avatarOmar Sandoval <osandov@fb.com>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      81380ca1
  2. 04 Apr, 2017 1 commit
  3. 02 Apr, 2017 5 commits
  4. 30 Mar, 2017 2 commits
  5. 29 Mar, 2017 12 commits
  6. 28 Mar, 2017 9 commits
  7. 27 Mar, 2017 3 commits
    • Linus Torvalds's avatar
      Merge tag 'edac_for_4.11_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp · ad0376eb
      Linus Torvalds authored
      Pull EDAC updates from Borislav Petkov:
       "A new EDAC driver for the Pondicherry2 memory controller IP found in
        the Intel Apollo Lake platform and the Denverton microserver.
      
        Plus small fixlets.
      
        Normally I had this queued for 4.12 but Tony requested for the
        pnd2_edac driver to possibly land in 4.11 therefore I'm sending it to
        you now.
      
        It is a driver for new hardware which people don't have yet so it
        shouldn't cause any regressions.
      
        The couple of patches ontop of it show that Qiuxu actually did test it
        on the hardware he has access to :)"
      
      * tag 'edac_for_4.11_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
        EDAC, pnd2_edac: Fix reported DIMM number
        EDAC, pnd2_edac: Fix !EDAC_DEBUG build
        EDAC: Select DEBUG_FS
        EDAC, pnd2_edac: Add new EDAC driver for Intel SoC platforms
        EDAC, i5000, i5400: Fix use of MTR_DRAM_WIDTH macro
        EDAC, xgene: Fix wrongly spelled "procesing"
      ad0376eb
    • Linus Torvalds's avatar
      Merge tag 'pinctrl-v4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl · 85f91d5c
      Linus Torvalds authored
      Pull more pin control fixes from Linus Walleij:
       "Here is a bunch of pin control fixes again
      
        A bit more than I'd like for this subsystem at this point, but what
        can I do. They are all driver fixes for hardware issues, as like "we
        forgot", "we didn't think of the fact that this could happen", "oops
        that one goes there" etc
      
         - Kconfig fixup for the TI IOdelay pinctrl-single add-on
      
         - fix up a typo in the meson i2c ao groups
      
         - switch a remapping back to use devm_ioremap() as
           devm_ioremap_resource() does not allow for sharing memory regions
      
         - do not clear the Qualcomm irq status bit in irq_unmask(), as this
           can lead to missing interrupts while the irq handler is executing
      
         - add irq_request/release_resources() on the ST driver
      
         - add a bunch of mysteriously missing pingroups for high numbered
           pins in the Qualcomm ipq4019 driver"
      
      * tag 'pinctrl-v4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
        pinctrl: qcom: ipq4019: add missing pingroups for pins > 70
        pinctrl: st: add irq_request/release_resources callbacks
        pinctrl: qcom: Don't clear status bit on irq_unmask
        pinctrl: samsung: Fix memory mapping code
        pinctrl: meson-gxbb: Fix typo in i2c ao groups
        pinctrl: ti: The IODelay driver is a DRA7xxx feature so depend on that SoC
      85f91d5c
    • Linus Torvalds's avatar
      Merge tag 'm68k-for-v4.11-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k · d3e68cef
      Linus Torvalds authored
      Pull m68k updates from Geert Uytterhoeven:
      
        - build warning fix
      
        - defconfig updates
      
        - wire up new statx syscall
      
      * tag 'm68k-for-v4.11-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
        m68k: Wire up statx
        m68k/defconfig: Update defconfigs for v4.11-rc1
        m68k/bitops: Correct signature of test_bit()
      d3e68cef