Given .BTF section is not allocatable, it will get trimmed after module is
loaded. BPF system handles that properly by creating an independent copy of
data. But prevent any accidental misused by resetting the pointer to BTF data.

Fixes: 36e68442 ("bpf: Load and verify kernel module BTFs")
Suggested-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jessica Yu <jeyu@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/bpf/20201121070829.2612884-2-andrii@kernel.org

In some modes of operation, Kbuild allows to build modules without having
vmlinux image around. In such case, generation of module BTF is impossible.
This patch changes the behavior to emit a warning about impossibility of
generating kernel module BTF, instead of breaking the build. This is especially
important for out-of-tree external module builds.

In vmlinux-less mode:

$ make clean
$ make modules_prepare
$ touch drivers/acpi/button.c
$ make M=drivers/acpi
...
  CC [M]  drivers/acpi/button.o
  MODPOST drivers/acpi/Module.symvers
  LD [M]  drivers/acpi/button.ko
  BTF [M] drivers/acpi/button.ko
Skipping BTF generation for drivers/acpi/button.ko due to unavailability of vmlinux
...
$ readelf -S ~/linux-build/default/drivers/acpi/button.ko | grep BTF -A1
... empty ...

Now with normal build:

$ make all
...
LD [M]  drivers/acpi/button.ko
BTF [M] drivers/acpi/button.ko
...
$ readelf -S ~/linux-build/default/drivers/acpi/button.ko | grep BTF -A1
  [60] .BTF              PROGBITS         0000000000000000  00029310
       000000000000ab3f  0000000000000000           0     0     1

Fixes: 5f9ae91f ("kbuild: Build kernel module BTFs if BTF is enabled and pahole supports it")
Reported-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/bpf/20201121070829.2612884-1-andrii@kernel.org

A couple of places in the readme had invalid rst formatting causing the
rendering to be off. This patch fixes them with minimal edits.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201122022205.57229-2-andreimatei1@gmail.com

The link was bad because of invalid rst; it was pointing to itself and
was rendering badly.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201122022205.57229-1-andreimatei1@gmail.com

Simplify task_file_seq_get_next() by removing two in/out arguments: task
and fstruct. Use info->task and info->files instead.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201120002833.2481110-1-songliubraving@fb.com

Commit 47c09d6a("bpftool: Introduce "prog profile" command")
introduced "bpftool prog profile" command which can be used
to profile bpf program with metrics like # of instructions,

This patch added support for itlb_misses and dtlb_misses.
During an internal bpf program performance evaluation,
I found these two metrics are also very useful. The following
is an example output:

 $ bpftool prog profile id 324 duration 3 cycles itlb_misses

           1885029 run_cnt
        5134686073 cycles
            306893 itlb_misses

 $ bpftool prog profile id 324 duration 3 cycles dtlb_misses

           1827382 run_cnt
        4943593648 cycles
           5975636 dtlb_misses

 $ bpftool prog profile id 324 duration 3 cycles llc_misses

           1836527 run_cnt
        5019612972 cycles
           4161041 llc_misses

From the above, we can see quite some dtlb misses, 3 dtlb misses
perf prog run. This might be something worth further investigation.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201119073039.4060095-1-yhs@fb.com

Björn Töpel says:

====================

This series contain some fixes for selftests/bpf when building/running
on a RISC-V host. Details can be found in each individual commit.

v2:
  Makefile cosmetics. (Andrii)
  Simplified unpriv check and added comment. (Andrii)
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

A lot of tests require unaligned memory access to work. Mark the tests
as such, so that they can be avoided on unsupported architectures such
as RISC-V.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Luke Nelson <luke.r.nels@gmail.com>
Link: https://lore.kernel.org/bpf/20201118071640.83773-4-bjorn.topel@gmail.com

Some architectures have strict alignment requirements. In that case,
the BPF verifier detects if a program has unaligned accesses and
rejects them. A user can pass BPF_F_ANY_ALIGNMENT to a program to
override this check. That, however, will only work when a privileged
user loads a program. An unprivileged user loading a program with this
flag will be rejected prior entering the verifier.

Hence, it does not make sense to load unprivileged programs without
strict alignment when testing the verifier. This patch avoids exactly
that.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Luke Nelson <luke.r.nels@gmail.com>
Link: https://lore.kernel.org/bpf/20201118071640.83773-3-bjorn.topel@gmail.com

The selftests/bpf Makefile includes system include directories from
the host, when building BPF programs. On RISC-V glibc requires that
__riscv_xlen is defined. This is not the case for "clang -target bpf",
which messes up __WORDSIZE (errno.h -> ... -> wordsize.h) and breaks
the build.

By explicitly defining __risc_xlen correctly for riscv, we can
workaround this.

Fixes: 167381f3 ("selftests/bpf: Makefile fix "missing" headers on build with -idirafter")
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Luke Nelson <luke.r.nels@gmail.com>
Link: https://lore.kernel.org/bpf/20201118071640.83773-2-bjorn.topel@gmail.com

The helper uses CLOCK_MONOTONIC_COARSE source of time that is less
accurate but more performant.

We have a BPF CGROUP_SKB firewall that supports event logging through
bpf_perf_event_output(). Each event has a timestamp and currently we use
bpf_ktime_get_ns() for it. Use of bpf_ktime_get_coarse_ns() saves ~15-20
ns in time required for event logging.

bpf_ktime_get_ns():
EgressLogByRemoteEndpoint                              113.82ns    8.79M

bpf_ktime_get_coarse_ns():
EgressLogByRemoteEndpoint                               95.40ns   10.48M
Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201117184549.257280-1-me@ubique.spb.ru

The test forks a child process, updates the local storage to set/unset
the securexec bit.

The BPF program in the test attaches to bprm_creds_for_exec which checks
the local storage of the current task to set the secureexec bit on the
binary parameters (bprm).

The child then execs a bash command with the environment variable
TMPDIR set in the envp.  The bash command returns a different exit code
based on its observed value of the TMPDIR variable.

Since TMPDIR is one of the variables that is ignored by the dynamic
loader when the secureexec bit is set, one should expect the
child execution to not see this value when the secureexec bit is set.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201117232929.2156341-2-kpsingh@chromium.org

The helper allows modification of certain bits on the linux_binprm
struct starting with the secureexec bit which can be updated using the
BPF_F_BPRM_SECUREEXEC flag.

secureexec can be set by the LSM for privilege gaining executions to set
the AT_SECURE auxv for glibc.  When set, the dynamic linker disables the
use of certain environment variables (like LD_PRELOAD).
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201117232929.2156341-1-kpsingh@chromium.org

Magnus Karlsson says:

====================
This patch set improves the performance of mainly the Tx processing of
AF_XDP sockets. Though, patch 3 also improves the Rx path. All in all,
this patch set improves the throughput of the l2fwd xdpsock application
by around 11%. If we just take a look at Tx processing part, it is
improved by 35% to 40%.

Hopefully the new batched Tx interfaces should be of value to other
drivers implementing AF_XDP zero-copy support. But patch #3 is generic
and will improve performance of all drivers when using AF_XDP sockets
(under the premises explained in that patch).

@Daniel. In patch 3, I apply all the padding required to hinder the
adjacency prefetcher to prefetch the wrong things. After this patch
set, I will submit another patch set that introduces
____cacheline_padding_in_smp in include/linux/cache.h according to your
suggestions. The last patch in that patch set will then convert the
explicit paddings that we have now to ____cacheline_padding_in_smp.

v2 -> v3:
* Fixed #pragma warning with clang and defined a loop_unrolled_for macro
  for easier readability [lkp, Nick]
* Simplified invalid descriptor handling in xskq_cons_read_desc_batch()

v1 -> v2:
* Removed added parameter in i40e_setup_tx_descriptors and adopted a
  simpler solution [Maciej]
* Added test for !xs in xsk_tx_peek_release_desc_batch() [John]
* Simplified return path in xsk_tx_peek_release_desc_batch() [John]
* Dropped patch #1 in v1 that introduced lazy completions. Hopefully
  this is not needed when we get busy poll [Jakub]
* Iterate over local variable in xskq_prod_reserve_addr_batch() for
  improved performance
* Fixed the fallback path in xsk_tx_peek_release_desc_batch() so that
  it also produces a batch of descriptors, albeit by using the slower
  (but more general) older code. This improves the performance of the
  case when multiple sockets are sharing the same device and queue id.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Use the new batched xsk interfaces for the Tx path in the i40e driver
to improve performance. On my machine, this yields a throughput
increase of 4% for the l2fwd sample app in xdpsock. If we instead just
look at the Tx part, this patch set increases throughput with above
20% for Tx.

Note that I had to explicitly loop unroll the inner loop to get to
this performance level, by using a pragma. It is honored by both clang
and gcc and should be ignored by versions that do not support
it. Using the -funroll-loops compiler command line switch on the
source file resulted in a loop unrolling on a higher level that
lead to a performance decrease instead of an increase.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/1605525167-14450-6-git-send-email-magnus.karlsson@gmail.com

Introduce batched descriptor interfaces in the xsk core code for the
Tx path to be used in the driver to write a code path with higher
performance. This interface will be used by the i40e driver in the
next patch. Though other drivers would likely benefit from this new
interface too.

Note that batching is only implemented for the common case when
there is only one socket bound to the same device and queue id. When
this is not the case, we fall back to the old non-batched version of
the function.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/1605525167-14450-5-git-send-email-magnus.karlsson@gmail.com

Introduce one cache line worth of padding between the consumer pointer
and the flags field as well as between the flags field and the start
of the descriptors in all the lockless rings. This so that the x86 HW
adjacency prefetcher will not prefetch the adjacent pointer/field when
only one pointer/field is going to be used. This improves throughput
performance for the l2fwd sample app with 1% on my machine with HW
prefetching turned on in the BIOS.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/1605525167-14450-4-git-send-email-magnus.karlsson@gmail.com

Remove the unnecessary access to the software ring for the AF_XDP
zero-copy driver. This was used to record the length of the packet so
that the driver Tx completion code could sum this up to produce the
total bytes sent. This is now performed during the transmission of the
packet, so no need to record this in the software ring.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/1605525167-14450-3-git-send-email-magnus.karlsson@gmail.com

Increment the statistics over how many Tx packets have been sent at
the time of sending instead of at the time of completion. This as a
completion event means that the buffer has been sent AND returned to
user space. The packet always gets sent shortly after sendto() is
called. The kernel might, for performance reasons, decide to not
return every single buffer to user space immediately after sending,
for example, only after a batch of packets have been
transmitted. Incrementing the number of packets sent at completion,
will in that case be confusing as if you send a single packet, the
counter might show zero for a while even though the packet has been
transmitted.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/1605525167-14450-2-git-send-email-magnus.karlsson@gmail.com

When operating on split BTF, btf__find_by_name[_kind] will not
iterate over all types since they use btf->nr_types to show
the number of types to iterate over. For split BTF this is
the number of types _on top of base BTF_, so it will
underestimate the number of types to iterate over, especially
for vmlinux + module BTF, where the latter is much smaller.

Use btf__get_nr_types() instead.

Fixes: ba451366 ("libbpf: Implement basic split BTF support")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1605437195-2175-1-git-send-email-alan.maguire@oracle.com

The intention of the current check is to avoid using bpf_sk_storage
in irq and nmi.  Jakub pointed out that the current check cannot
do that.  For example, in_serving_softirq() returns true
if the softirq handling is interrupted by hard irq.

Fixes: 8e4597c6 ("bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201116200113.2868539-1-kafai@fb.com

From second fragment on, IPV6FR program must stop the dissection of IPV6
fragmented packet. This is the same approach used for IPV4 fragmentation.
This fixes the flow keys calculation for the upper-layer protocols.
Note that according to RFC8200, the first fragment packet must include
the upper-layer header.
Signed-off-by: Santucci Pierpaolo <santucci@epigenesys.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/X7JUzUj34ceE2wBm@santucci.pierpaolo

Shannon Nelson says:

====================
ionic updates

These updates are a bit of code cleaning and a minor
bit of performance tweaking.

v3: convert ionic_lif_quiesce() to void
v2: added void cast on call to ionic_lif_quiesce()
    lowered batching threshold
    added patch to flatten calls to ionic_lif_rx_mode
    added patch to change from_ndo to can_sleep
====================

Link: https://lore.kernel.org/r/20201112182208.46770-1-snelson@pensando.ioSigned-off-by: Jakub Kicinski <kuba@kernel.org>

With a few more uses of true and false in function calls, we
need to give them some useful names so we can tell from the
calling point what we're doing.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of having two different ways of expressing the same
sleepability concept, using opposite logic, we can rework the
from_ndo to can_sleep for a more consistent usage.

Fixes: 1800eee1 ("net: ionic: Replace in_interrupt() usage.")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The _ionic_lif_rx_mode() is only used once and really doesn't
need to be broken out.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We should be using the multicast sync routines for the multicast
filters.  Also, let's just flatten the logic a bit and pull
the small unicast routine back into ionic_set_rx_mode().

Fixes: 1800eee1 ("net: ionic: Replace in_interrupt() usage.")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We don't need to refill the rx descriptors on every napi
if only a few were handled.  Waiting until we can batch up
a few together will save us a few Rx cycles.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

After the queues are stopped, expressly quiesce the lif.
This assures that even if the queues were in an odd state,
the firmware will close up everything cleanly.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Request a link check as soon as the netdev is registered rather
than waiting for the watchdog to go off in order to get the
interface operational a little more quickly.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Change the order of operations in the link_up handling to be
sure that the queues are up and ready before we announce that
the link is up.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Check PTR_ERR with IS_ERR to fix this.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20201112144936.54776-1-yuehaibing@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit bdb7cc64 ("ipv6: Count interface receive statistics on the
ingress netdev") removed all callees for ipv6_skb_idev(). Hence, since
then, ipv6_skb_idev() is unused and make CC=clang W=1 warns:

  net/ipv6/exthdrs.c:909:33:
    warning: unused function 'ipv6_skb_idev' [-Wunused-function]

So, remove this unused function and a -Wunused-function warning.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20201113135012.32499-1-lukas.bulwahn@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf-next 2020-11-14

1) Add BTF generation for kernel modules and extend BTF infra in kernel
   e.g. support for split BTF loading and validation, from Andrii Nakryiko.

2) Support for pointers beyond pkt_end to recognize LLVM generated patterns
   on inlined branch conditions, from Alexei Starovoitov.

3) Implements bpf_local_storage for task_struct for BPF LSM, from KP Singh.

4) Enable FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage
   infra, from Martin KaFai Lau.

5) Add XDP bulk APIs that introduce a defer/flush mechanism to optimize the
   XDP_REDIRECT path, from Lorenzo Bianconi.

6) Fix a potential (although rather theoretical) deadlock of hashtab in NMI
   context, from Song Liu.

7) Fixes for cross and out-of-tree build of bpftool and runqslower allowing build
   for different target archs on same source tree, from Jean-Philippe Brucker.

8) Fix error path in htab_map_alloc() triggered from syzbot, from Eric Dumazet.

9) Move functionality from test_tcpbpf_user into the test_progs framework so it
   can run in BPF CI, from Alexander Duyck.

10) Lift hashtab key_size limit to be larger than MAX_BPF_STACK, from Florian Lehner.

Note that for the fix from Song we have seen a sparse report on context
imbalance which requires changes in sparse itself for proper annotation
detection where this is currently being discussed on linux-sparse among
developers [0]. Once we have more clarification/guidance after their fix,
Song will follow-up.

  [0] https://lore.kernel.org/linux-sparse/CAHk-=wh4bx8A8dHnX612MsDO13st6uzAz1mJ1PaHHVevJx_ZCw@mail.gmail.com/T/
      https://lore.kernel.org/linux-sparse/20201109221345.uklbp3lzgq6g42zb@ltop.local/T/

* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (66 commits)
  net: mlx5: Add xdp tx return bulking support
  net: mvpp2: Add xdp tx return bulking support
  net: mvneta: Add xdp tx return bulking support
  net: page_pool: Add bulk support for ptr_ring
  net: xdp: Introduce bulking for xdp tx return path
  bpf: Expose bpf_d_path helper to sleepable LSM hooks
  bpf: Augment the set of sleepable LSM hooks
  bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TP
  bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP
  bpf: Rename some functions in bpf_sk_storage
  bpf: Folding omem_charge() into sk_storage_charge()
  selftests/bpf: Add asm tests for pkt vs pkt_end comparison.
  selftests/bpf: Add skb_pkt_end test
  bpf: Support for pointers beyond pkt_end.
  tools/bpf: Always run the *-clean recipes
  tools/bpf: Add bootstrap/ to .gitignore
  bpf: Fix NULL dereference in bpf_task_storage
  tools/bpftool: Fix build slowdown
  tools/runqslower: Build bpftool using HOSTCC
  tools/runqslower: Enable out-of-tree build
  ...
====================

Link: https://lore.kernel.org/r/20201114020819.29584-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add VSC8572 and VSC8574 in the PTP configuration
as they also support PTP.

The relevant datasheets can be found here:
  - VSC8572: https://www.microchip.com/wwwproducts/en/VSC8572
  - VSC8574: https://www.microchip.com/wwwproducts/en/VSC8574Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20201112092250.914079-1-steen.hegelund@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Lorenzo Bianconi says:

====================
XDP bulk APIs introduce a defer/flush mechanism to return
pages belonging to the same xdp_mem_allocator object
(identified via the mem.id field) in bulk to optimize
I-cache and D-cache since xdp_return_frame is usually
run inside the driver NAPI tx completion loop.

Convert mvneta, mvpp2 and mlx5 drivers to xdp_return_frame_bulk APIs.

More details on benchmarks run on mlx5 can be found here:
https://github.com/xdp-project/xdp-project/blob/master/areas/mem/xdp_bulk_return01.org

Changes since v5:
- do not keep looping over ptr_ring if the cache is full but release leftover
  pages running page_pool_return_page

Changes since v4:
- fix comments
- introduce xdp_frame_bulk_init utility routine
- compiler annotations for I-cache code layout
- move rcu_read_lock outside fast-path
- mlx5 xdp bulking code optimization

Changes since v3:
- align DEV_MAP_BULK_SIZE to XDP_BULK_QUEUE_SIZE
- refactor page_pool_put_page_bulk to avoid code duplication

Changes since v2:
- move mvneta changes in a dedicated patch

Changes since v1:
- improve comments
- rework xdp_return_frame_bulk routine logic
- move count and xa fields at the beginning of xdp_frame_bulk struct
- invert logic in page_pool_put_page_bulk for loop
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>

Convert mlx5 driver to xdp_return_frame_bulk APIs.

XDP_REDIRECT (upstream codepath): 8.9Mpps
XDP_REDIRECT (upstream codepath + bulking APIs): 10.2Mpps
Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/250460319fd868b7b5668fc1deca74dd42813a90.1605267335.git.lorenzo@kernel.org

Convert mvpp2 driver to xdp_return_frame_bulk APIs.

XDP_REDIRECT (upstream codepath): 1.79Mpps
XDP_REDIRECT (upstream codepath + bulking APIs): 1.93Mpps
Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Matteo Croce <mcroce@microsoft.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/0b38c295e58e8ce251ef6b4e2187a2f457f9f7a3.1605267335.git.lorenzo@kernel.org

Convert mvneta driver to xdp_return_frame_bulk APIs.

XDP_REDIRECT (upstream codepath): 275Kpps
XDP_REDIRECT (upstream codepath + bulking APIs): 284Kpps
Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/9af8014006d022fc0fec78cdaa71beb56999750d.1605267335.git.lorenzo@kernel.org

Introduce the capability to batch page_pool ptr_ring refill since it is
usually run inside the driver NAPI tx completion loop.
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/bpf/08dd249c9522c001313f520796faa777c4089e1c.1605267335.git.lorenzo@kernel.org