As the number of ksm zero pages is not included in ksm_merging_pages per
process when enabling use_zero_pages, it's unclear of how many actual
pages are merged by KSM. To let users accurately estimate their memory
demands when unsharing KSM zero-pages, it's necessary to show KSM zero-
pages per process. In addition, it help users to know the actual KSM
profit because KSM-placed zero pages are also benefit from KSM.

since unsharing zero pages placed by KSM accurately is achieved, then
tracking empty pages merging and unmerging is not a difficult thing any
longer.

Since we already have /proc/<pid>/ksm_stat, just add the information of
'ksm_zero_pages' in it.

Link: https://lkml.kernel.org/r/20230613030938.185993-1-yang.yang29@zte.com.cnSigned-off-by: xu xin <xu.xin16@zte.com.cn>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Xiaokai Ran <ran.xiaokai@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Xuexin Jiang <jiang.xuexin@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

As pages_sharing and pages_shared don't include the number of zero pages
merged by KSM, we cannot know how many pages are zero pages placed by KSM
when enabling use_zero_pages, which leads to KSM not being transparent
with all actual merged pages by KSM.  In the early days of use_zero_pages,
zero-pages was unable to get unshared by the ways like MADV_UNMERGEABLE so
it's hard to count how many times one of those zeropages was then
unmerged.

But now, unsharing KSM-placed zero page accurately has been achieved, so
we can easily count both how many times a page full of zeroes was merged
with zero-page and how many times one of those pages was then unmerged. 
and so, it helps to estimate memory demands when each and every shared
page could get unshared.

So we add ksm_zero_pages under /sys/kernel/mm/ksm/ to show the number
of all zero pages placed by KSM. Meanwhile, we update the Documentation.

Link: https://lkml.kernel.org/r/20230613030934.185944-1-yang.yang29@zte.com.cnSigned-off-by: xu xin <xu.xin16@zte.com.cn>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Xuexin Jiang <jiang.xuexin@zte.com.cn>
Reviewed-by: Xiaokai Ran <ran.xiaokai@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "ksm: support tracking KSM-placed zero-pages", v10.

The core idea of this patch set is to enable users to perceive the number
of any pages merged by KSM, regardless of whether use_zero_page switch has
been turned on, so that users can know how much free memory increase is
really due to their madvise(MERGEABLE) actions.  But the problem is, when
enabling use_zero_pages, all empty pages will be merged with kernel zero
pages instead of with each other as use_zero_pages is disabled, and then
these zero-pages are no longer monitored by KSM.

The motivations to do this is seen at:
https://lore.kernel.org/lkml/202302100915227721315@zte.com.cn/

In one word, we hope to implement the support for KSM-placed zero pages
tracking without affecting the feature of use_zero_pages, so that app
developer can also benefit from knowing the actual KSM profit by getting
KSM-placed zero pages to optimize applications eventually when
/sys/kernel/mm/ksm/use_zero_pages is enabled.


This patch (of 5):

When use_zero_pages of ksm is enabled, madvise(addr, len,
MADV_UNMERGEABLE) and other ways (like write 2 to /sys/kernel/mm/ksm/run)
to trigger unsharing will *not* actually unshare the shared zeropage as
placed by KSM (which is against the MADV_UNMERGEABLE documentation).  As
these KSM-placed zero pages are out of the control of KSM, the related
counts of ksm pages don't expose how many zero pages are placed by KSM
(these special zero pages are different from those initially mapped zero
pages, because the zero pages mapped to MADV_UNMERGEABLE areas are
expected to be a complete and unshared page).

To not blindly unshare all shared zero_pages in applicable VMAs, the patch
use pte_mkdirty (related with architecture) to mark KSM-placed zero pages.
Thus, MADV_UNMERGEABLE will only unshare those KSM-placed zero pages.

In addition, we'll reuse this mechanism to reliably identify KSM-placed
ZeroPages to properly account for them (e.g., calculating the KSM profit
that includes zeropages) in the latter patches.

The patch will not degrade the performance of use_zero_pages as it doesn't
change the way of merging empty pages in use_zero_pages's feature.

Link: https://lkml.kernel.org/r/202306131104554703428@zte.com.cn
Link: https://lkml.kernel.org/r/20230613030928.185882-1-yang.yang29@zte.com.cnSigned-off-by: xu xin <xu.xin16@zte.com.cn>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Xuexin Jiang <jiang.xuexin@zte.com.cn>
Reviewed-by: Xiaokai Ran <ran.xiaokai@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Migrating file pages and swapcache pages into device memory is not
supported.  Try to get rid of the swap cache, and if successful, go ahead
as with other anonymous pages.

Link: https://lkml.kernel.org/r/20230607172944.11713-1-mpenttil@redhat.comSigned-off-by: Mika Penttilä <mpenttil@redhat.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add a test to verify that when a memcg hits its limit in zswap, it doesn't
trigger an unwanted writeback that would result in pages not owned by that
memcg to be sent to disk, even if zswap isn't full.  This was fixed by
commit 0bdf0efa("zswap: do not shrink if cgroup may not zswap").

Link: https://lkml.kernel.org/r/20230621153548.428093-4-cerasuolodomenico@gmail.comSigned-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add a cgroup selftest that verifies memcg charging in zswap.  The original
issue was that kmem bypass was applied to pages swapped out to zswap by
kswapd, resulting in zswapped memory not being charged.  It was fixed by
commit cd08d80e("mm: correctly charge compressed memory to its
memcg").

Link: https://lkml.kernel.org/r/20230621153548.428093-3-cerasuolodomenico@gmail.comSigned-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "selftests: cgroup: add zswap test program".

This series adds 2 zswap related selftests that verify known and fixed
issues.  A new dedicated test program (test_zswap) is proposed since the
test cases are specific to zswap and hosts specific helpers.

The first patch adds the (empty) test program, while the other 2 add an
actual test function each.


This patch (of 3):

Add empty cgroup-zswap self test scaffold program, test functions to be
added in the next commits.

Link: https://lkml.kernel.org/r/20230621153548.428093-1-cerasuolodomenico@gmail.com
Link: https://lkml.kernel.org/r/20230621153548.428093-2-cerasuolodomenico@gmail.comSigned-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

__build_all_zonelists() acquires zonelist_update_seq by first disabling
interrupts via local_irq_save() and then acquiring the seqlock with
write_seqlock().  This is troublesome and leads to problems on PREEMPT_RT.
The problem is that the inner spinlock_t becomes a sleeping lock on
PREEMPT_RT and must not be acquired with disabled interrupts.

The API provides write_seqlock_irqsave() which does the right thing in one
step.  printk_deferred_enter() has to be invoked in non-migrate-able
context to ensure that deferred printing is enabled and disabled on the
same CPU.  This is the case after zonelist_update_seq has been acquired.

There was discussion on the first submission that the order should be:
	local_irq_disable();
	printk_deferred_enter();
	write_seqlock();

to avoid pitfalls like having an unaccounted printk() coming from
write_seqlock_irqsave() before printk_deferred_enter() is invoked.  The
only origin of such a printk() can be a lockdep splat because the lockdep
annotation happens after the sequence count is incremented.  This is
exceptional and subject to change.

It was also pointed that PREEMPT_RT can be affected by the printk problem
since its write_seqlock_irqsave() does not really disable interrupts. 
This isn't the case because PREEMPT_RT's printk implementation differs
from the mainline implementation in two important aspects:

- Printing happens in a dedicated threads and not at during the
  invocation of printk().
- In emergency cases where synchronous printing is used, a different
  driver is used which does not use tty_port::lock.

Acquire zonelist_update_seq with write_seqlock_irqsave() and then defer
printk output.

Link: https://lkml.kernel.org/r/20230623201517.yw286Knb@linutronix.de
Fixes: 1007843a ("mm/page_alloc: fix potential deadlock on zonelist_update_seq seqlock")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

__zs_compact always putback src_zspage into class list after
migrate_zspage.  Thus, we don't need to keep last position of src_zspage
any more.  Let's remove it.

Link: https://lkml.kernel.org/r/20230624053120.643409-4-senozhatsky@chromium.orgSigned-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Alexey Romanov <avromanov@sberdevices.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Destination zspage fullness check need to be done after zs_object_copy()
because that's where source and destination zspages fullness change. 
Checking destination zspage fullness before zs_object_copy() may cause
migration to loop through source zspage sub-pages scanning for allocate
objects just to find out at the end that the destination zspage is full.

Link: https://lkml.kernel.org/r/20230624053120.643409-3-senozhatsky@chromium.orgSigned-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org> 
Cc: Alexey Romanov <avromanov@sberdevices.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "zsmalloc: small compaction improvements", v2.

A tiny series that can reduce the number of find_alloced_obj() invocations
(which perform a linear scan of sub-page) during compaction.  Inspired by
Alexey Romanov's findings.


This patch (of 3):

zspage migration can terminate as soon as it moves the last allocated
object from the source zspage.  Add a simple helper zspage_empty() that
tests zspage ->inuse on each migration iteration.

Link: https://lkml.kernel.org/r/20230624053120.643409-2-senozhatsky@chromium.orgSigned-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Suggested-by: Alexey Romanov <AVRomanov@sberdevices.ru>
Reviewed-by: Alexey Romanov <avromanov@sberdevices.ru>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

HASH_SMALL only works when parameter numentries is 0. But the sole caller
futex_init() never calls alloc_large_system_hash() with numentries set to
0. So HASH_SMALL is obsolete and remove it.

Link: https://lkml.kernel.org/r/20230625021323.849147-1-linmiaohe@huawei.comSigned-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The current calculation of min_free_kbytes only uses ZONE_DMA and
ZONE_NORMAL pages,but the ZONE_MOVABLE zone->_watermark[WMARK_MIN] will
also divide part of min_free_kbytes.This will cause the min watermark of
ZONE_NORMAL to be too small in the presence of ZONE_MOVEABLE.

__GFP_HIGH and PF_MEMALLOC allocations usually don't need movable zone
pages, so just like ZONE_HIGHMEM, cap pages_min to a small value in
__setup_per_zone_wmarks().

On my testing machine with 16GB of memory (transparent hugepage is turned
off by default, and movablecore=12G is configured) The following is a
comparative test data of watermark_min

		no patch	add patch
ZONE_DMA	1		8
ZONE_DMA32	151		709
ZONE_NORMAL	233		1113
ZONE_MOVABLE	1434		128
min_free_kbytes	7288		7326

Link: https://lkml.kernel.org/r/20230625031656.23941-1-liuq131@chinatelecom.cnSigned-off-by: liuq <liuq131@chinatelecom.cn>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

block_commit_write() always returns 0, this patch changes it to return
void.

Link: https://lkml.kernel.org/r/20230626055518.842392-3-beanhuo@iokpp.deSigned-off-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Luís Henriques <ocfs2-devel@oss.oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Originally inode is used to get blksize, after commit 45bce8f3
("fs/buffer.c: make block-size be per-page and protected by the page
lock"), __block_commit_write no longer uses this parameter inode.

[akpm@linux-foundation.org: remove now-unused local `inode']
Link: https://lkml.kernel.org/r/20230626055518.842392-2-beanhuo@iokpp.deSigned-off-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Luís Henriques <ocfs2-devel@oss.oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Remove unneeded 'inline' annotation from num_poisoned_pages_inc() and
num_poisoned_pages_sub().  No functional change intended.

Link: https://lkml.kernel.org/r/20230626114343.1846587-1-linmiaohe@huawei.comSigned-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Use helper function destroy_memory_type() to release memtype instead of
open code it to help improve code readability a bit.  No functional change
intended.

Link: https://lkml.kernel.org/r/20230626121053.1916447-1-linmiaohe@huawei.comSigned-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Wei Xu <weixugc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Remove unneeded PageLRU(p) and is_free_buddy_page(p) check as slab caches
are not shrunk now.  This check can be added back when a lightweight range
based shrinker is available.

Link: https://lkml.kernel.org/r/20230628014929.3441386-1-linmiaohe@huawei.comSigned-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When expanding a range in two directions, only partially overwriting the
previous and next ranges, the number of entries will not be increased, so
we can just update the pivots as a fast path. However, it may introduce
potential risks in RCU mode, because it updates two pivots. We only
enable it in non-RCU mode.

Link: https://lkml.kernel.org/r/20230628073657.75314-5-zhangpeng.00@bytedance.comSigned-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When the new range can be completely covered by the original last range
without touching the boundaries on both sides, two new entries can be
appended to the end as a fast path. We update the original last pivot at
the end, and the newly appended two entries will not be accessed before
this, so it is also safe in RCU mode.

This is useful for sequential insertion, which is what we do in
dup_mmap(). Enabling BENCH_FORK in test_maple_tree and just running
bench_forking() gives the following time-consuming numbers:

before:               after:
17,874.83 msec        15,738.38 msec

It shows about a 12% performance improvement for duplicating VMAs.

Link: https://lkml.kernel.org/r/20230628073657.75314-4-zhangpeng.00@bytedance.comSigned-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add test for expanding range in RCU mode. If we use the fast path of the
slot store to expand range in RCU mode, this test will fail.

Link: https://lkml.kernel.org/r/20230628073657.75314-3-zhangpeng.00@bytedance.comSigned-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "Optimize the fast path of mas_store()", v4.

Add fast paths for mas_wr_append() and mas_wr_slot_store() respectively.
The newly added fast path of mas_wr_append() is used in fork() and how
much it benefits fork() depends on how many VMAs are duplicated.

Thanks Liam for the review.


This patch (of 4):

Add tests for all cases of mas_wr_append() and mas_wr_slot_store().

Link: https://lkml.kernel.org/r/20230628073657.75314-1-zhangpeng.00@bytedance.com
Link: https://lkml.kernel.org/r/20230628073657.75314-2-zhangpeng.00@bytedance.comSigned-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

ra->prev_pos tracks the last visited byte in the previous read request. 
It is used to check whether it is sequential read in ondemand_readahead
and thus affects the readahead window.

After commit 06c04442 ("mm/filemap.c: generic_file_buffered_read() now
uses find_get_pages_contig"), update logic of prev_pos is changed.  It
updates prev_pos after each return from filemap_get_pages().  But the read
request from user may be not fully completed at this point.  The updated
prev_pos impacts the subsequent readahead window.

The real problem is performance drop of fsck_msdos between linux-5.4 and
linux-5.15(also linux-6.4).  Comparing to linux-5.4,It spends about 110%
time and read 140% pages.  The read pattern of fsck_msdos is not fully
sequential.

Simplified read pattern of fsck_msdos likes below:
1.read at page offset 0xa,size 0x1000
2.read at other page offset like 0x20,size 0x1000
3.read at page offset 0xa,size 0x4000
4.read at page offset 0xe,size 0x1000

Here is the read status on linux-6.4:
1.after read at page offset 0xa,size 0x1000
    ->page ofs 0xa go into pagecache
2.after read at page offset 0x20,size 0x1000
    ->page ofs 0x20 go into pagecache
3.read at page offset 0xa,size 0x4000
    ->filemap_get_pages read ofs 0xa from pagecache and returns
    ->prev_pos is updated to 0xb and goto next loop
    ->filemap_get_pages tends to read ofs 0xb,size 0x3000
    ->initial_readahead case in ondemand_readahead since prev_pos is
      the same as request ofs.
    ->read 8 pages while async size is 5 pages
      (PageReadahead flag at page 0xe)
4.read at page offset 0xe,size 0x1000
    ->hit page 0xe with PageReadahead flag set,double the ra_size.
      read 16 pages while async size is 16 pages
Now it reads 24 pages while actually uses 5 pages

on linux-5.4:
1.the same as 6.4
2.the same as 6.4
3.read at page offset 0xa,size 0x4000
    ->read ofs 0xa from pagecache
    ->read ofs 0xb,size 0x3000 using page_cache_sync_readahead
      read 3 pages
    ->prev_pos is updated to 0xd before generic_file_buffered_read
      returns
4.read at page offset 0xe,size 0x1000
    ->initial_readahead case in ondemand_readahead since
      request ofs-prev_pos==1
    ->read 4 pages while async size is 3 pages

Now it reads 7 pages while actually uses 5 pages.

In above demo, the initial_readahead case is triggered by offset of user
request on linux-5.4.  While it may be triggered by update logic of
prev_pos on linux-6.4.

To fix the performance drop, update prev_pos after finishing one read
request.

Link: https://lkml.kernel.org/r/20230628110220.120134-1-haibo.li@mediatek.comSigned-off-by: Haibo Li <haibo.li@mediatek.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add a matrix for testing gup based on the current gup_test.  Only run the
matrix when -a is specified because it's a bit slow.

It covers:

  - Different types of huge pages: thp, hugetlb, or no huge page
  - Permissions: Write / Read-only
  - Fast-gup, with/without
  - Types of the GUP: pin / gup / longterm pins
  - Shared / Private memories
  - GUP size: 1 / 512 / random page sizes

Link: https://lkml.kernel.org/r/20230628215310.73782-9-peterx@redhat.comSigned-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A . Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Allows to specify optional tests in run_vmtests.sh, where we can run time
consuming test matrix only when user specified "-a".

Link: https://lkml.kernel.org/r/20230628215310.73782-8-peterx@redhat.comSigned-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A . Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Now __get_user_pages() should be well prepared to handle thp completely,
as long as hugetlb gup requests even without the hugetlb's special path.

Time to retire follow_hugetlb_page().

Tweak misc comments to reflect reality of follow_hugetlb_page()'s removal.

Link: https://lkml.kernel.org/r/20230628215310.73782-7-peterx@redhat.comSigned-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A . Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The acceleration of THP was done with ctx.page_mask, however it'll be
ignored if **pages is non-NULL.

The old optimization was introduced in 2013 in 240aadee ("mm:
accelerate mm_populate() treatment of THP pages").  It didn't explain why
we can't optimize the **pages non-NULL case.  It's possible that at that
time the major goal was for mm_populate() which should be enough back
then.

Optimize thp for all cases, by properly looping over each subpage, doing
cache flushes, and boost refcounts / pincounts where needed in one go.

This can be verified using gup_test below:

  # chrt -f 1 ./gup_test -m 512 -t -L -n 1024 -r 10

Before:    13992.50 ( +-8.75%)
After:       378.50 (+-69.62%)

Link: https://lkml.kernel.org/r/20230628215310.73782-6-peterx@redhat.comSigned-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A . Shutemov <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The only path that doesn't use generic "**pages" handling is the gate vma.
Make it use the same path, meanwhile tune the next_page label upper to
cover "**pages" handling.  This prepares for THP handling for "**pages".

Link: https://lkml.kernel.org/r/20230628215310.73782-5-peterx@redhat.comSigned-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A . Shutemov <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

follow_page() doesn't need it, but we'll start to need it when unifying
gup for hugetlb.

Link: https://lkml.kernel.org/r/20230628215310.73782-4-peterx@redhat.comSigned-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A . Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

follow_page() doesn't use FOLL_PIN, meanwhile hugetlb seems to not be the
target of FOLL_WRITE either.  However add the checks.

Namely, either the need to CoW due to missing write bit, or proper
unsharing on !AnonExclusive pages over R/O pins to reject the follow page.
That brings this function closer to follow_hugetlb_page().

So we don't care before, and also for now.  But we'll care if we switch
over slow-gup to use hugetlb_follow_page_mask().  We'll also care when to
return -EMLINK properly, as that's the gup internal api to mean "we should
unshare".  Not really needed for follow page path, though.

When at it, switching the try_grab_page() to use WARN_ON_ONCE(), to be
clear that it just should never fail.  When error happens, instead of
setting page==NULL, capture the errno instead.

Link: https://lkml.kernel.org/r/20230628215310.73782-3-peterx@redhat.comSigned-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A . Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "mm/gup: Unify hugetlb, speed up thp", v4.

Hugetlb has a special path for slow gup that follow_page_mask() is
actually skipped completely along with faultin_page().  It's not only
confusing, but also duplicating a lot of logics that generic gup already
has, making hugetlb slightly special.

This patchset tries to dedup the logic, by first touching up the slow gup
code to be able to handle hugetlb pages correctly with the current follow
page and faultin routines (where we're mostly there..  due to 10 years ago
we did try to optimize thp, but half way done; more below), then at the
last patch drop the special path, then the hugetlb gup will always go the
generic routine too via faultin_page().

Note that hugetlb is still special for gup, mostly due to the pgtable
walking (hugetlb_walk()) that we rely on which is currently per-arch.  But
this is still one small step forward, and the diffstat might be a proof
too that this might be worthwhile.

Then for the "speed up thp" side: as a side effect, when I'm looking at
the chunk of code, I found that thp support is actually partially done. 
It doesn't mean that thp won't work for gup, but as long as **pages
pointer passed over, the optimization will be skipped too.  Patch 6 should
address that, so for thp we now get full speed gup.

For a quick number, "chrt -f 1 ./gup_test -m 512 -t -L -n 1024 -r 10"
gives me 13992.50us -> 378.50us.  Gup_test is an extreme case, but just to
show how it affects thp gups.


This patch (of 8):

Firstly, the no_page_table() is meaningless for hugetlb which is a no-op
there, because a hugetlb page always satisfies:

  - vma_is_anonymous() == false
  - vma->vm_ops->fault != NULL

So we can already safely remove it in hugetlb_follow_page_mask(), alongside
with the page* variable.

Meanwhile, what we do in follow_hugetlb_page() actually makes sense for a
dump: we try to fault in the page only if the page cache is already
allocated.  Let's do the same here for follow_page_mask() on hugetlb.

It should so far has zero effect on real dumps, because that still goes
into follow_hugetlb_page().  But this may start to influence a bit on
follow_page() users who mimics a "dump page" scenario, but hopefully in a
good way.  This also paves way for unifying the hugetlb gup-slow.

Link: https://lkml.kernel.org/r/20230628215310.73782-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20230628215310.73782-2-peterx@redhat.comSigned-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A . Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

As a result of the patches "mm: Call arch_swap_restore() from
do_swap_page()" and "mm: Call arch_swap_restore() from unuse_pte()", there
are no circumstances in which a swapped-in page is installed in a page
table without first having arch_swap_restore() called on it.  Therefore,
we no longer need the logic in set_pte_at() that restores the tags, so
remove it.

Link: https://lkml.kernel.org/r/20230523004312.1807357-4-pcc@google.com
Link: https://linux-review.googlesource.com/id/I8ad54476f3b2d0144ccd8ce0c1d7a2963e5ff6f3Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: kasan-dev@googlegroups.com
Cc: kasan-dev <kasan-dev@googlegroups.com>
Cc: "Kuan-Ying Lee (李冠穎)" <Kuan-Ying.Lee@mediatek.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

We would like to move away from requiring architectures to restore
metadata from swap in the set_pte_at() implementation, as this is not only
error-prone but adds complexity to the arch-specific code.  This requires
us to call arch_swap_restore() before calling swap_free() whenever pages
are restored from swap.  We are currently doing so everywhere except in
unuse_pte(); do so there as well.

Link: https://lkml.kernel.org/r/20230523004312.1807357-3-pcc@google.com
Link: https://linux-review.googlesource.com/id/I68276653e612d64cde271ce1b5a99ae05d6bbc4fSigned-off-by: Peter Collingbourne <pcc@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: kasan-dev <kasan-dev@googlegroups.com>
Cc: "Kuan-Ying Lee (李冠穎)" <Kuan-Ying.Lee@mediatek.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

All callers of show_free_areas() pass 0 and NULL, so we can directly use
show_mem() instead of show_free_areas(0, NULL), which could make
show_free_areas() a static function.

Link: https://lkml.kernel.org/r/20230630062253.189440-2-wangkefeng.wang@huawei.comSigned-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

All callers of show_mem() pass 0 and NULL, so we can remove the two
arguments by directly calling __show_mem(0, NULL, MAX_NR_ZONES - 1) in
show_mem().

Link: https://lkml.kernel.org/r/20230630062253.189440-1-wangkefeng.wang@huawei.comSigned-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The memfd_create() syscall, enabled by CONFIG_MEMFD_CREATE, is useful on
its own even when not required by CONFIG_TMPFS or CONFIG_HUGETLBFS.

Split it into its own proper bool option that can be enabled by users.

Move that option into mm/ where the code itself also lies.  Also add
"select" statements to CONFIG_TMPFS and CONFIG_HUGETLBFS so they
automatically enable CONFIG_MEMFD_CREATE as before.

Link: https://lkml.kernel.org/r/20230630-config-memfd-v1-1-9acc3ae38b5a@weissschuh.netSigned-off-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Zhangjin Wu <falcon@tinylab.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

After converting the last user to folio_raw_mapping(), we can safely
remove the function.

Link: https://lkml.kernel.org/r/20230701032853.258697-3-zhangpeng362@huawei.comSigned-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

We can replace four implicit calls to compound_head() with one by using
folio.

Link: https://lkml.kernel.org/r/20230701032853.258697-2-zhangpeng362@huawei.comSigned-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Our test finds a WARN_ON in add_to_avail_list.  During add_to_avail_list,
avail_lists is already in swap_avail_heads, while leads to this WARN_ON.

Here is the simplified calltrace:

------------[ cut here ]------------
Call trace:
 add_to_avail_list+0xb8/0xc0
 swap_range_free+0x110/0x138
 swapcache_free_entries+0x100/0x1c0
 free_swap_slot+0xbc/0xe0
 put_swap_folio+0x1f0/0x2ec
 delete_from_swap_cache+0x6c/0xd0
 folio_free_swap+0xa4/0xe4
 __try_to_reclaim_swap+0x9c/0x190
 free_swap_and_cache+0x84/0x88
 unmap_page_range+0x31c/0x934
 unmap_single_vma.isra.0+0x48/0x84
 unmap_vmas+0x98/0x10c
 exit_mmap+0xa4/0x210
 mmput+0x88/0x158
 do_exit+0x284/0x970
 do_group_exit+0x34/0x90
 post_copy_siginfo_from_user32+0x0/0x1cc
 do_notify_resume+0x15c/0x470
 el0_svc+0x74/0x84
 el0t_64_sync_handler+0xb8/0xbc
 el0t_64_sync+0x190/0x194

During swapoff, try_to_unuse fails to alloc memory due to memory limit and
this leads to the failure of swapoff and causes re-insertion of swap space
back into swap_list.  During _enable_swap_info, this swap device is added
to avail list even this swap device if full.  At the same time, one entry
in this full swap device in released and we try to add this device into
avail list and find it is already in the avail list.  This causes this
WARN_ON.

To fix this.  Don't add to avail list is swap is full.

[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20230627120833.2230766-3-mawupeng1@huawei.comSigned-off-by: Ma Wupeng <mawupeng1@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "fix WARN_ON in add_to_avail_list".


Empty check for plist_node is checked in add_to_avail_list and plist_add. 
Drop the duplicate one in add_to_avail_list.

Link: https://lkml.kernel.org/r/20230627120833.2230766-1-mawupeng1@huawei.com
Link: https://lkml.kernel.org/r/20230627120833.2230766-2-mawupeng1@huawei.comSigned-off-by: Ma Wupeng <mawupeng1@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>