- 23 Apr, 2008 6 commits
-
-
Ram Pai authored
[mszeredi@suse.cz] split big patch into managable chunks Add the following functions: dentry_path() seq_dentry() These are similar to d_path() and seq_path(). But instead of calculating the path within a mount namespace, they calculate the path from the root of the filesystem to a given dentry, ignoring mounts completely. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: [PATCH] get rid of __exit_files(), __exit_fs() and __put_fs_struct() [PATCH] proc_readfd_common() race fix [PATCH] double-free of inode on alloc_file() failure exit in create_write_pipe() [PATCH] teach seq_file to discard entries [PATCH] umount_tree() will unhash everything itself [PATCH] get rid of more nameidata passing in namespace.c [PATCH] switch a bunch of LSM hooks from nameidata to path [PATCH] lock exclusively in collect_mounts() and drop_collected_mounts() [PATCH] move a bunch of declarations to fs/internal.h
-
Linus Torvalds authored
Commit 88452565 ("PCI: clean up resource alignment management") didn't set the alignment information for the cardbus window resources, causing their subsequent allocations to fail miserably with a message like yenta_cardbus 0000:15:00.0: device not available because of BAR 7 [100:1ff] collisions yenta_cardbus: probe of 0000:15:00.0 failed with error -16 or similar. This fixes it and clarifies the code a bit too (we used to have to use the insane PCI bridge alignment logic that put the alignment in the "start" field, this makes it use the slightly easier-to-understand size-based alignment, and allows us to set the resource start to zero until it gets allocated). Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rafael J. Wysocki authored
Prevent bus_remove_device() from crashing if dev->knode_bus has not been initialized before it's called. This can happen if the device_add() ended up breaking out early due to an error, for example. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rafael J. Wysocki authored
Do not refuse to actually register children of suspended devices, but still warn about attempts to do that. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 22 Apr, 2008 34 commits
-
-
Al Viro authored
The only reason to have separated __...() for those was to keep them inlined for local users in exit.c. Since Alexey removed the inline on those, there's no reason whatsoever to keep them around; just collapse with normal variants. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Since we drop the rcu_read_lock inside the loop, we can't assume that files->fdt will remain unchanged (and not freed) between iterations. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Duh... Fortunately, the bug is quite recent (post-2.6.25) and, embarrassingly, mine ;-/ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] run drivers/misc/sgi-xp through scripts/checkpatch.pl [IA64] run rest drivers/misc/sgi-xp through scripts/Lindent [IA64] run some drivers/misc/sgi-xp through scripts/Lindent [IA64] move XP and XPC to drivers/misc/sgi-xp [IA64] minor irq handler cleanups [IA64] simplify notify hooks in mca.c [IA64] do notify DIE_MCA_MONARCH_PROCESS for each monarchs [IA64] disable interrupts on exit of ia64_trace_syscall
-
David Sterba authored
Use offset type consistently. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: SELinux fixups needed for preemptable RCU from -rt SELinux: no BUG_ON(!ss_initialized) in selinux_clone_mnt_opts
-
Dean Nelson authored
Addressed issues raised by scripts/checkpatch.pl. Removed unnecessary curly braces. Eliminated uses of volatiles and use of kernel_thread() and daemonize(). Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Dean Nelson authored
Ran patches through scripts/Lindent (part 2). Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Dean Nelson authored
Ran patches through scripts/Lindent (part 1). Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Dean Nelson authored
Move XPC and XPNET from arch/ia64/sn/kernel to drivers/misc/sgi-xp. Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds authored
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c: Fix platform driver hotplug/coldplug i2c: New driver for the SuperH Mobile I2C bus controller i2c/scx200_acb: Don't use 0 as NULL pointer i2c-bfin-twi: Fix mismatch in add timer and delete timer i2c-bfin-twi: Just let i2c-bfin-twi driver depends on BLACKFIN i2c-bfin-twi: Use simpler comment headers and strip out information that is maintained in the scm's log i2c-bfin-twi: Cleanup driver descriptions, versions and some module useful information i2c-bfin-twi: Add missing pin mux operation i2c-bfin-twi: Add platform_resource interface to support multi-port TWI controllers i2c-bfin-twi: Add repeat start feature to avoid break of a bundle of i2c master xfer operation i2c: Remove trailing whitespaces in busses/Kconfig i2c: Replace remaining __FUNCTION__ occurrences i2c: Renesas SH7760 I2C master driver i2c-dev: Split i2cdev_ioctl i2c-ibm_iic: Support building as an of_platform driver i2c-ibm_iic: Change the log levels i2c: Add platform driver on top of the new pca-algorithm i2c-algo-pca: Extend for future drivers i2c-algo-pca: Remove trailing whitespaces and unnecessary UTF i2c: Remove the algorithm drivers from the config menu
-
Randy Dunlap authored
Add missing kernel-doc in kernel/sched.c: Warning(linux-2.6.25-git3//kernel/sched.c:7044): No description found for parameter 'span' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlmLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: linux/{dlm,dlm_device}.h: cleanup for userspace dlm: common max length definitions dlm: move plock code from gfs2 dlm: recover nodes that are removed and re-added dlm: save master info after failed no-queue request dlm: make dlm_print_rsb() static dlm: match signedness between dlm_config_info and cluster_set
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Suppress hidinput for Samsung IR control HID: remove 60x GTCO devices from blacklist HID: export headers properly HID: WiseGroup 866 Dual Joypad needs output reports quirk HID: ThrustMaster FF driver is no longer experimental HID: Logitech diNovo Mini pad support HID: fix race between open() and disconnect() in usbhid HID: make hid_input_field and usbhid_modify_dquirk static HID: pass numbered reports properly to hidraw HID: fix misplaced rdesc quirk HID: force feedback driver for Logitech Rumblepad 2 HID: move wait from hid to usbhid HID: make function from dbg_hid HID: fix sparse warnings HID: only dump report traffic with debug level 2 HID: patch to add NOGET for DMI/Acomdata HID: Sunplus Wireless Desktop needs report descriptor fixup HID: quirk for MS Wireless Desktop Receiver (model 1028) HID: fixup fullspeed interval on highspeed Afatech DVB-T IR kbd HID: fix build failure in hiddev_ioctl with gcc 3.2
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6: (41 commits) udf: use crc_itu_t from lib instead of udf_crc udf: Fix compilation warnings when UDF debug is on udf: Fix bug in VAT mapping code udf: Add read-only support for 2.50 UDF media udf: Fix handling of multisession media udf: Mount filesystem read-only if it has pseudooverwrite partition udf: Handle VAT packed inside inode properly udf: Allow loading of VAT inode udf: Fix detection of VAT version udf: Silence warning about accesses beyond end of device udf: Improve anchor block detection udf: Cleanup anchor block detection. udf: Move processing of virtual partitions udf: Move filling of partition descriptor info into a separate function udf: Improve error recovery on mount udf: Cleanup volume descriptor sequence processing udf: fix anchor point detection udf: Remove declarations of arrays of size UDF_NAME_LEN (256 bytes) udf: Remove checking of existence of filename in udf_add_entry() udf: Mark udf_process_sequence() as noinline ...
-
Petr Tesarik authored
While looking at the implementation of the Ram backed block device driver, I stumbled across a write-only local variable, which makes little sense, so I assume it should actually work like this: Signed-off-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Kay Sievers authored
Since 43cc71ee, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable I2C platform drivers, to allow module auto loading. [ db: add some more drivers ] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Magnus Damm authored
This is V5 of the SuperH Mobile I2C Controller Driver. A simple Master only driver for the I2C block included in processors such as sh7343, sh7722 and sh7723. Tested on a sh7722 MigoR using a rs5c732b rtc. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Adrian Bunk authored
Don't use 0 as NULL pointer. Spotted by sparse. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Hans Schillstrom authored
Move init_completion to just before i2c transfer. http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3385Signed-off-by: Hans Schillstrom <hans.schillstrom@shlsys.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Bryan Wu authored
Simply use "depends on BLACKFIN" (which is technically correct) and just document which machines have the device. Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Mike Frysinger authored
i2c-bfin-twi: Use simpler comment headers and strip out information that is maintained in the scm's log Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Bryan Wu authored
Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Bryan Wu authored
Blackfin TWI controller hardware pin should be requested from GPIO port controller Before BF54x, there is no need to do this. But as long as BF54x and BF52x are supported by this generic driver, the missing pin mux operation should be added. Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Bryan Wu authored
- Dynamic alloc the resource of TWI driver data according to board information - TWI register read/write accessor based on dynamic regs_base - Support TWI0/TWI1 for BF54x Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Sonic Zhang authored
- Create a new mode TWI_I2C_MODE_REPEAT. - No change to smbus operation. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Wolfram Sang authored
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Manuel Lauss authored
Driver for I2C interfaces in master mode on SH7760. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
Split the handling of the I2C_RDWR and I2C_SMBUS ioctls to their own functions. This limits the stack usage, saves one level of indentation and makes the code more readable. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Sean MacLennan authored
This patch allows the i2c-ibm_iic driver to be built either as an ocp driver or an of_platform driver. This allows it to run under the powerpc arch but maintains backward compatibility with the ppc arch. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Sean MacLennan authored
Change the log levels based on feedback from linxppc-dev. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Wolfram Sang authored
Tested on a blackfin. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Wolfram Sang authored
The separation between algorithm and adapter was unsharp at places. This was partly hidden by the fact, that the ISA-driver allowed just one instance and had all private data in static variables. This patch makes neccessary preparations to add a platform driver on top of the algorithm, while still supporting ISA. Note: Due to lack of hardware, the ISA-driver could not be tested except that it builds. Concerning the core struct i2c_algo_pca_data: - A private data field was added, all hardware dependant data may go here. Similar to other algorithms, now a pointer to this data is passed to the adapter's functions. In order to make as less changes as possible to the ISA-driver, it leaves the private data empty and still only uses its static variables. - A "reset_chip" function pointer was added; such a functionality must come from the adapter, not the algorithm. - use a variable "i2c_clock" instead of a function pointer "get_clock", allowing for write access to a default in case a wrong value was supplied. In the algorithm-file: - move "i2c-pca-algo.h" into "linux/i2c-algo-pca.h" - now using per_instance timeout values (i2c_adap->timeout) - error messages specify the device, not only the driver name - restructure initialization to easily support "i2c_add_numbered_adapter" - drop "retries" and "own" (i2c address) as they were unused (The state-machine for I2C-communication was not touched.) In the ISA-driver: - adapt to new algorithm Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-