- 25 Apr, 2011 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/lwfinger/linux-stagingGreg Kroah-Hartman authored
* git://git.kernel.org/pub/scm/linux/kernel/git/lwfinger/linux-staging: staging: rt2860sta and rt2870sta: Remove drivers replaced in net/wireless Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Vasiliy Kulikov authored
stli_brdstats is defined as global variable. After de-BKL-ization in the patch b4eda9cb an access to the variable is not serialized anymore. This leads to the race window between the check and the use in stli_getbrdstats(): if (copy_from_user(&stli_brdstats, bp, sizeof(combrd_t))) return -EFAULT; if (stli_brdstats.brd >= STL_MAXBRDS) <<< return -ENODEV; brdp = stli_brds[stli_brdstats.brd]; <<< If one process calls COM_GETBRDSTATS ioctl() with sane .brd, second process calls COM_GETBRDSTATS ioctl() with invalid .brd, and the second process' copy_from_user() executes exactly between the check and stli_brds[] indexation of the first process, then the first process gets contents of memory at *stli_brds[stli_brdstats.brd] address. Also the resulting .nrpanels field may be too big, in this case stli_brdstats.panels array overflows. Signed-off-by:
Vasiliy Kulikov <segoon@openwall.com> Signed-off-by:
-
Roland Vossen authored
Driver modules from the staging directory are marked 'tainted' by module.c. Subsequently, tainted modules are denied dynamic debugging. This is unwanted behavior, since staging modules should be able to use the dynamic debugging mechanism. Please merge this also into the staging-linus branch. Signed-off-by:
Roland Vossen <rvossen@broadcom.com> Acked-by:
Jason Baron <jbaron@redhat.com> Signed-off-by:
-
Franky Lin authored
dhdsdio_chip_attach and it sub functions are added for si/sb utils removal. It will replace si_attach in following patches. Signed-off-by:
Franky Lin <frankyl@broadcom.com> Signed-off-by:
-
Franky Lin authored
bcmchip.h contains chip specific core register base address and address translation macro for core register access. This is introduced for si/sb utils dependence removal in fullmac driver. Signed-off-by:
-
Arend van Spriel authored
Source file included bcmotp.h but did not use any declared item from that include file so it can safely be removed. Reviewed-by:
Henry Ptasinski <henryp@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Roland Vossen authored
Caused by brcmsmac.ko suppling a 0 value to Mac80211. Mac80211 subsequently divides by this number. Bug only occurred on AMPDU traffic. This is a fix for https://bugzilla.kernel.org/show_bug.cgi?id=32032, titled 'Divide error in minstrel_ht_tx_status followed by hang', reported by Wouter Cloetens. Signed-off-by:
-
Roland Vossen authored
Code cleanup. Signed-off-by:
-
Roland Vossen authored
Code cleanup. Signed-off-by:
-
Stanislav Fomichev authored
- replaced sizeof(struct pci_config_regs) with exact size; removed struct - cleaned up the rest of broadcom PCI specific defines Signed-off-by:
Stanislav Fomichev <kernel@fomichev.me> Signed-off-by:
-
Stanislav Fomichev authored
Signed-off-by:
-
Stanislav Fomichev authored
Signed-off-by:
-
Stanislav Fomichev authored
Signed-off-by:
-
Stanislav Fomichev authored
Signed-off-by:
-
Naveen Singh authored
The cfg80211 ops for power management were completely broken. If we were asked for to go into power save it was putting device in awake, and when we were asked to become awake we were putting the device into power save... This fixes the powersave operations to do the right thing. Signed-off-by:
Naveen Singh <nsingh@atheros.com> Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
-
Naveen Singh authored
If a scan operation is pending and in between a disconnect event is received from firmware the scan results never get sent back to cfg80211. This causes a scan failure and yields a device/resource busy state upon retries. If a disconnect event is received and scan is pending return the scan done to the cfg80211 to enable futher scans to be issued. Signed-off-by:
-
Naveen Singh authored
The firmware expects the device ID to be added on the data and command packets sent to firmware for AR6003 v2.1.1. Signed-off-by:
-
Naveen Singh authored
These commands and event IDs are used by AR6003 v2.1.1. Some events are no longer needed so these are removed now. Signed-off-by:
-
Naveen Singh authored
This adds support for AR6003 v2.1.1. Highlights changes for this new hardware are: 1. Host interest area, through which driver communicates with FW has been enhanced to accomodate additional members for proper functioanlity of new HW. 2. The firmware and the board data files are different for AR6003 v2.1.1. The capability to read those file have been added in the driver. 3. Certain parameters like numdevice, firmware mode needs to be programmed for proper functionality of new driver. Signed-off-by:
-
Naveen Singh authored
1) ATH6K_CONFIG_HIF_VIRTUAL_SCATTER needs to be ATH6KL_CONFIG_HIF_VIRTUAL_SCATTER in file ar6000_drv.h Signed-off-by: -
K. Y. Srinivasan authored
Now get rid of IDE details from blkvsc_drv.c. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
Hank Janssen <hjanssen@microsoft.com> Signed-off-by:
-
K. Y. Srinivasan authored
In preparation for removing the IDE details from the block driver, implement a function that maps channel properties to block device information. Signed-off-by:
-
K. Y. Srinivasan authored
One of the jump labels was named Remove; change it to remove. Signed-off-by:
-
K. Y. Srinivasan authored
One of the goto labels was named Cleanup; change it to cleanup. Signed-off-by:
-
K. Y. Srinivasan authored
Given that we don't support removable media, cleanup blkvsc_open(). Signed-off-by:
-
K. Y. Srinivasan authored
It is never the case that the dev_add function pointer will not be set (we set it in this code!). Get rid of this meaningless check. Signed-off-by:
-
K. Y. Srinivasan authored
Get rid of some DPRINT_ERR() calls. Signed-off-by:
-
K. Y. Srinivasan authored
The Hyper-V block driver does not handle removable media. Get rid of the code to manage removable media. Signed-off-by:
-
K. Y. Srinivasan authored
storvsc_remove() cannot fail, clean it up accordingly. Signed-off-by:
-
K. Y. Srinivasan authored
blkvsc_remove() cannot fail. Clean it up accordingly. Signed-off-by:
-
K. Y. Srinivasan authored
Get rid of some of the DPRINT_DBG() statements. Signed-off-by:
-
K. Y. Srinivasan authored
Get rid of some of the DPRINT_INFO() statements. Signed-off-by:
-
K. Y. Srinivasan authored
Simplyfify blkvsc_init_rw() by using a single scsi command independent of the start sector. Signed-off-by:
-
K. Y. Srinivasan authored
The block driver in Hyper-V does not support removable media, get rid of the blkvsc_revalidate_disk(). Signed-off-by:
-
K. Y. Srinivasan authored
The block driver in Hyper-V does not handle removable media, get rid of the media_not_present state. Signed-off-by:
-
K. Y. Srinivasan authored
Get rid of the function blkvsc_do_flush() and instead use the common function to force a device flush. Signed-off-by:
-
K. Y. Srinivasan authored
Get rid of blkvsc_do_read_capacity16() and instead use the common function for retrieving capacity. Signed-off-by:
-
K. Y. Srinivasan authored
Now that we have a common function for some of the operations on the device, use that and get rid of the function blkvsc_do_read_capacity(). Signed-off-by:
-
K. Y. Srinivasan authored
There are multiple functions to either get info about the device (INQUIRY, CAPACITY etc) or to FLUSH the device cache. The majority of the code for these functions is identical. Introduce a common function for doing all these operations. Signed-off-by:
-
K. Y. Srinivasan authored
We are making up the geometry anyway, keep it simple. Signed-off-by:
-
