- 23 Feb, 2011 11 commits
-
-
Tomoya MORINAGA authored
Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Tomoya MORINAGA authored
Currently, auto-flow control setting processing is not set correctly. This patch fixes the issue. Signed-off-by:
-
Tomoya MORINAGA authored
Currently, uart clock is not set correctly. This patch fixes the issue. Signed-off-by:
-
Tomoya MORINAGA authored
For easy to understad which port the message is out, replace pr_xxx with dev_xxx. Signed-off-by:
-
Tomoya MORINAGA authored
Reduce memcpy for performance improvement. Signed-off-by:
-
Tomoya MORINAGA authored
Currently, spin_lock is not initialized. Thus, add spin_lock_init(). Signed-off-by:
-
Tomoya MORINAGA authored
Currently, this driver can handle only single scatterlist. Thus, it can't send data beyond FIFO size. This patch enables this driver can handle multiple scatter list. Signed-off-by:
-
Greg Kroah-Hartman authored
As planned by Arnd Bergmann, this moves the following drivers to the drivers/staging/generic_serial directory where they will be removed after 2.6.41 if no one steps up to claim them. generic_serial rio ser_a2232 sx vme_scc Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: -
Greg Kroah-Hartman authored
As planned by Arnd Bergmann, this moves the following drivers to the drivers/staging/tty/ directory where they will be removed after 2.6.41 if no one steps up to claim them. epca epca ip2 istallion riscom8 serial167 specialix stallion Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: -
Greg Kroah-Hartman authored
As planned by Arnd Bergmann, this moves the ipwireless driver to the drivers/tty/ directory as that's where it really belongs. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jiri Slaby <jslaby@suse.cz> Cc: David Sterba <dsterba@suse.cz> Signed-off-by: -
Greg Kroah-Hartman authored
As planned by Arnd Bergmann, this moves the following drivers from drivers/char/ to drivers/tty/ as that's where they really belong: amiserial nozomi synclink rocket cyclades moxa mxser isicom bfin_jtag_comm Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
- 22 Feb, 2011 8 commits
-
-
Tobias Klauser authored
port->flags is of type upf_t, which corresponds to UPF_* flags. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Tobias Klauser authored
This will make it easier to get the driver to support device tree. The old platform data method is still supported though. Also change the driver to use only one platform device per port. Signed-off-by:
-
Tobias Klauser authored
This is not even used in nios2 arch code anymore. Signed-off-by:
-
Tobias Klauser authored
This fixes a sparse warning. Signed-off-by:
-
Feng Tang authored
The three identical uart ports can work either in DMA or PIO mode. Adding such a module parameter "hsu_dma_enable" will enable user to chose working modes for each port. If the mfd driver is built in kernel, adding a "mfd.hsu_dma_enable=x" in kernel command line has the same effect. Signed-off-by:
Feng Tang <feng.tang@intel.com> Signed-off-by:
-
Feng Tang authored
In A0 stepping, TX half-empty interrupt is not working, so have to use the full-empty interrupts whose performance will be 15% lower. Now re-enable the half-empty interrrupt after it is enabled in silicon. Signed-off-by:
-
Luck, Tony authored
Alan missed the ia64 simulator serial driver (because it was hidden in arch/... rather than located under drivers/... where one might expect to find a driver). Drop the "file *" argument from rs_ioctl() in arch/ia64/hp/sim/simserial.c Signed-off-by:
Tony Luck <tony.luck@intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>, Signed-off-by:
-
Greg Kroah-Hartman authored
The Kconfig options for the drivers/tty/ files still were hanging around in the "big" drivers/char/Kconfig file, so move them to the proper location under drivers/tty and drivers/tty/hvc/ Signed-off-by:
-
- 17 Feb, 2011 21 commits
-
-
Kay Sievers authored
This is useful for system management software so that it can kick off things like gettys and everything that's started from a tty, before we reuse it from/for something else or shut it down. Without this ioctl it would have to temporarily become the owner of the tty, then call vhangup() and then give it up again. Cc: Lennart Poettering <lennart@poettering.net> Signed-off-by:
Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
-
Alan Cox authored
Was this exploitable - who knows, but it was certainly totally broken Signed-of-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Alan Cox authored
This basically encapsulates the small bit of locking knowledge needed. While we are at it make sure we blow up on any more abusers and unsafe misuses of ioctl for this kind of stuff. We change the function to return an argument as at some point it needs to honour the POSIX 'I asked for changes but got none of them' error reporting corner case. Signed-off-by:
-
Greg Kroah-Hartman authored
This was caused by the previous patch to remove the file pointer from the tty ioctl handler. Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: -
Alan Cox authored
Only oddities here are a couple of drivers that bogusly called the ldisc helpers instead of returning -ENOIOCTLCMD. Fix the bug and the rest goes away. Signed-off-by:
-
Alan Cox authored
We don't use it so we can trim it from here as we try and stamp the file object dependencies out of the serial code. Signed-off-by:
-
Alan Cox authored
Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by:
-
Alan Cox authored
We don't actually need this and it causes problems for internal use of this functionality. Currently there is a single use of the FILE * pointer. That is the serial core which uses it to check tty_hung_up_p. However if that is true then IO_ERROR is also already set so the check may be removed. Signed-off-by:
-
Tobias Klauser authored
Signed-off-by:
-
Tobias Klauser authored
Use the regshift member of struct uart_port to store the address stride from platform data. This way we can save one dereference per call of altera_uart_readl and altera_uart_writel. This also allows us to use the driver without platform data, which is needed for device tree support in the Nios2 port. Acked-by:
Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by:
-
Tobias Klauser authored
Commit 6b5756f1 introduced the possibility for pdev->id being -1 but the change was not done equally in altera_uart_remove. This patch fixes this. Acked-by:
-
Jiri Olsa authored
using VT_SETACTIVATE ioctl for console switch did not work, since it put wrong param to the set_console function. Also ioctl returned misleading error, because of the missing break statement. I wonder anyone has ever used this one :). Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Signed-off-by:
-
Viktar Palstsiuk authored
Enables PPS support in atmel serial driver to make PPS API working. Signed-off-by:
Viktar Palstsiuk <viktar.palstsiuk@promwad.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by:
-
Niranjana Vishwanathapura authored
msm_smd_tty driver provides tty device interface to 'DS' and 'GPSNMEA' streaming SMD ports. Cc: Brian Swetland <swetland@google.com> Signed-off-by:
Niranjana Vishwanathapura <nvishwan@codeaurora.org> Acked-by:
-
Yin Kangkai authored
In 8250.c original ns16550 autoconfig code, we change the divisor latch when we goto to high speed mode, we're assuming the previous speed is legacy. This some times is not true. For example in a system with both CONFIG_SERIAL_8250 and CONFIG_SERIAL_8250_PNP set, in this case, the code (autoconfig) will be called twice, one in serial8250_init/probe() and the other is from serial_pnp_probe. When serial_pnp_probe calls the autoconfig for NS16550A, it's already in high speed mode, change the divisor latch (quot << 3) in this case will make the UART console garbled. CC: Greg Kroah-Hartman <greg@kroah.com> CC: David Woodhouse <dwmw2@infradead.org> CC: linux-kernel@vger.kernel.org CC: stable@kernel.org Signed-off-by:
Yin Kangkai <kangkai.yin@linux.intel.com> Signed-off-by:
-
Yin Kangkai authored
For any reason if the NS16550A was not work in high speed mode (e.g. we hold NS16550A from going to high speed mode in autoconfig_16550a()), now we are resume from suspend, we should also set the uartclk to the correct value. Otherwise it is still the old 1843200 and that will bring issues. CC: Greg Kroah-Hartman <greg@kroah.com> CC: David Woodhouse <dwmw2@infradead.org> CC: linux-kernel@vger.kernel.org CC: stable@kernel.org Signed-off-by:
-
Russ Gorby authored
renamed spi_driver variable to not be h/w specific set driver name to use DRVNAME define removed commented-out define Signed-off-by:
Russ Gorby <russ.gorby@intel.com> Signed-off-by:
-
Russ Gorby authored
The probe routine should call spi_setup() to configure the SPI bus so it can properly communicate with the device. E.g. the device operates in SPI mode 1. Called spi_setup to configure SPI mode, max_speed_hz, and bpw Signed-off-by:
-
Russ Gorby authored
Platforms containing the 6260 can run up to 25Mhz. For these platforms set max_speed_hz to 25Mhz. Signed-off-by:
-
Russ Gorby authored
driver should support 32bit SPI transfers. The boolean variable only allowed 8/16. Changed to support 8/16/32 for future enabling of 32 bpw. Signed-off-by:
-
Russ Gorby authored
This driver is a SPI protocol driver and has no DMA ops associated with the device so the call will fail. Furthermore, the DMA allocation made here will be used by the SPI controller driver (parent dev) so it makes sense to pass that device instead. Signed-off-by:
-
