- 08 Feb, 2023 30 commits
-
-
Hans de Goede authored
Calling v4l2_ctrl_s_ctrl(asd->run_mode, pipe->default_run_mode) when the stream is already active (through another /dev/video# node) causes the stream to stop. Move the call to set the default run-mode so that it is only done on the first open of one of the 4 /dev/video# nodes of one of the 2 streams (atomisp-sub-devices / asd-s). Fixes: 2c45e343 ("media: atomisp: set per-device's default mode") Reviewed-by:
Andy Shevchenko <andy@kernel.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Hans de Goede authored
If set_fmt() fails make queue_setup() actually return the error instead of returning 0. This fixes the following oops on set_fmt() failures: [ 1060.378662] ------------[ cut here ]------------ [ 1060.378805] WARNING: CPU: 0 PID: 2080 at drivers/media/common/videobuf2/videobuf2-core.c:840 vb2_core_reqbufs+0x3f7/0x430 [videobuf2_common] ... [ 1060.381414] RIP: 0010:vb2_core_reqbufs+0x3f7/0x430 [videobuf2_common] ... [ 1060.382066] vb2_ioctl_reqbufs+0x9d/0xe0 [videobuf2_v4l2] [ 1060.382181] __video_do_ioctl+0x18e/0x3c0 [videodev] Reviewed-by:
-
Hans Verkuil authored
Don't touch q->start_streaming_called directly, use the vb2_start_streaming_called() function instead. Link: https://lore.kernel.org/r/bc6c24ec-72ea-64a1-9061-311cc7339827@xs4all.nlSigned-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Arnd Bergmann authored
The recent conversion missed the Kconfig bit, so it can now end up in a link error on randconfig builds: ld.lld: error: undefined symbol: vb2_vmalloc_memops >>> referenced by atomisp_fops.c >>> drivers/staging/media/atomisp/pci/atomisp_fops.o:(atomisp_open) in archive vmlinux.a Link: https://lore.kernel.org/r/20230104082212.3770415-1-arnd@kernel.org Fixes: cb48ae89 ("media: atomisp: Convert to videobuf2") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Tested-by:
-
Duoming Zhou authored
When the ene device is detaching, function ene_remove() will be called. But there is no function to cancel tx_sim_timer in ene_remove(), the timer handler ene_tx_irqsim() could race with ene_remove(). As a result, the UAF bugs could happen, the process is shown below. (cleanup routine) | (timer routine) | mod_timer(&dev->tx_sim_timer, ..) ene_remove() | (wait a time) | ene_tx_irqsim() | dev->hw_lock //USE | ene_tx_sample(dev) //USE Fix by adding del_timer_sync(&dev->tx_sim_timer) in ene_remove(), The tx_sim_timer could stop before ene device is deallocated. What's more, The rc_unregister_device() and del_timer_sync() should be called first in ene_remove() and the deallocated functions such as free_irq(), release_region() and so on should be called behind them. Because the rc_unregister_device() is well synchronized. Otherwise, race conditions may happen. The situations that may lead to race conditions are shown below. Firstly, the rx receiver is disabled with ene_rx_disable() before rc_unregister_device() in ene_remove(), which means it can be enabled again if a process opens /dev/lirc0 between ene_rx_disable() and rc_unregister_device(). Secondly, the irqaction descriptor is freed by free_irq() before the rc device is unregistered, which means irqaction descriptor may be accessed again after it is deallocated. Thirdly, the timer can call ene_tx_sample() that can write to the io ports, which means the io ports could be accessed again after they are deallocated by release_region(). Therefore, the rc_unregister_device() and del_timer_sync() should be called first in ene_remove(). Suggested by: Sean Young <sean@mess.org> Fixes: 9ea53b74 ("V4L/DVB: STAGING: remove lirc_ene0100 driver") Signed-off-by:Duoming Zhou <duoming@zju.edu.cn> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Li Jun authored
In case runtime PM is enabled, do runtime PM clean up to remove cpu latency qos request, otherwise driver removal may have below kernel dump: [ 19.463299] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048 [ 19.472161] Mem abort info: [ 19.474985] ESR = 0x0000000096000004 [ 19.478754] EC = 0x25: DABT (current EL), IL = 32 bits [ 19.484081] SET = 0, FnV = 0 [ 19.487149] EA = 0, S1PTW = 0 [ 19.490361] FSC = 0x04: level 0 translation fault [ 19.495256] Data abort info: [ 19.498149] ISV = 0, ISS = 0x00000004 [ 19.501997] CM = 0, WnR = 0 [ 19.504977] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000049f81000 [ 19.511432] [0000000000000048] pgd=0000000000000000, p4d=0000000000000000 [ 19.518245] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 19.524520] Modules linked in: gpio_ir_recv(+) rc_core [last unloaded: rc_core] [ 19.531845] CPU: 0 PID: 445 Comm: insmod Not tainted 6.2.0-rc1-00028-g2c397a46d47c #72 [ 19.531854] Hardware name: FSL i.MX8MM EVK board (DT) [ 19.531859] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 19.551777] pc : cpu_latency_qos_remove_request+0x20/0x110 [ 19.557277] lr : gpio_ir_recv_runtime_suspend+0x18/0x30 [gpio_ir_recv] [ 19.557294] sp : ffff800008ce3740 [ 19.557297] x29: ffff800008ce3740 x28: 0000000000000000 x27: ffff800008ce3d50 [ 19.574270] x26: ffffc7e3e9cea100 x25: 00000000000f4240 x24: ffffc7e3f9ef0e30 [ 19.574284] x23: 0000000000000000 x22: ffff0061803820f4 x21: 0000000000000008 [ 19.574296] x20: ffffc7e3fa75df30 x19: 0000000000000020 x18: ffffffffffffffff [ 19.588570] x17: 0000000000000000 x16: ffffc7e3f9efab70 x15: ffffffffffffffff [ 19.595712] x14: ffff800008ce37b8 x13: ffff800008ce37aa x12: 0000000000000001 [ 19.602853] x11: 0000000000000001 x10: ffffcbe3ec0dff87 x9 : 0000000000000008 [ 19.609991] x8 : 0101010101010101 x7 : 0000000000000000 x6 : 000000000f0bfe9f [ 19.624261] x5 : 00ffffffffffffff x4 : 0025ab8e00000000 x3 : ffff006180382010 [ 19.631405] x2 : ffffc7e3e9ce8030 x1 : ffffc7e3fc3eb810 x0 : 0000000000000020 [ 19.638548] Call trace: [ 19.640995] cpu_latency_qos_remove_request+0x20/0x110 [ 19.646142] gpio_ir_recv_runtime_suspend+0x18/0x30 [gpio_ir_recv] [ 19.652339] pm_generic_runtime_suspend+0x2c/0x44 [ 19.657055] __rpm_callback+0x48/0x1dc [ 19.660807] rpm_callback+0x6c/0x80 [ 19.664301] rpm_suspend+0x10c/0x640 [ 19.667880] rpm_idle+0x250/0x2d0 [ 19.671198] update_autosuspend+0x38/0xe0 [ 19.675213] pm_runtime_set_autosuspend_delay+0x40/0x60 [ 19.680442] gpio_ir_recv_probe+0x1b4/0x21c [gpio_ir_recv] [ 19.685941] platform_probe+0x68/0xc0 [ 19.689610] really_probe+0xc0/0x3dc [ 19.693189] __driver_probe_device+0x7c/0x190 [ 19.697550] driver_probe_device+0x3c/0x110 [ 19.701739] __driver_attach+0xf4/0x200 [ 19.705578] bus_for_each_dev+0x70/0xd0 [ 19.709417] driver_attach+0x24/0x30 [ 19.712998] bus_add_driver+0x17c/0x240 [ 19.716834] driver_register+0x78/0x130 [ 19.720676] __platform_driver_register+0x28/0x34 [ 19.725386] gpio_ir_recv_driver_init+0x20/0x1000 [gpio_ir_recv] [ 19.731404] do_one_initcall+0x44/0x2ac [ 19.735243] do_init_module+0x48/0x1d0 [ 19.739003] load_module+0x19fc/0x2034 [ 19.742759] __do_sys_finit_module+0xac/0x12c [ 19.747124] __arm64_sys_finit_module+0x20/0x30 [ 19.751664] invoke_syscall+0x48/0x114 [ 19.755420] el0_svc_common.constprop.0+0xcc/0xec [ 19.760132] do_el0_svc+0x38/0xb0 [ 19.763456] el0_svc+0x2c/0x84 [ 19.766516] el0t_64_sync_handler+0xf4/0x120 [ 19.770789] el0t_64_sync+0x190/0x194 [ 19.774460] Code: 910003fd a90153f3 aa0003f3 91204021 (f9401400) [ 19.780556] ---[ end trace 0000000000000000 ]--- Signed-off-by:
Li Jun <jun.li@nxp.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Convert ST STIH4xx HDMI CEC bindings to DT schema. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Convert NVIDIA Tegra HDMI CEC bindings to DT schema. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Convert HDMI CEC GPIO bindings to DT schema. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert Samsung S5P HDMI CEC adapter bindings to DT schema. Signed-off-by:
-
Krzysztof Kozlowski authored
Reference common HDMI CEC adapter properties to simplify the binding and have only one place of definition for common properties. The common CEC binding expects also node name to be 'cec'. Signed-off-by:
-
Krzysztof Kozlowski authored
Reference common HDMI CEC adapter properties to simplify the binding and have only one place of definition for common properties. Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by:
-
Krzysztof Kozlowski authored
Convert common HDMI CEC adapter bindings to DT schema. Signed-off-by:
-
Krzysztof Kozlowski authored
Move st,stm32-cec.yaml bindings to cec subfolder and drop unneeded "bindings" in the title. Signed-off-by:
-
Krzysztof Kozlowski authored
Move amlogic,meson-gx-ao-cec.yaml bindings to cec subfolder and drop unneeded quotes. Signed-off-by:
-
Dong Chuanjian authored
When the pointer variable is judged to be null, null is returned directly. [hverkuil: fix two checkpatch warnings] Signed-off-by:
Dong Chuanjian <chuanjian@nfschina.com> Acked-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Fixes: d3f756ad ("media: v4l2: Trace calculated p/b0/b1 initial reflist") Signed-off-by:
-
Chen-Yu Tsai authored
The Hantro driver uses a hardcoded value for the bus_info field in the media device and |struct v4l2_capability|. This worked well when there was just one device. However with the iMX.8 series we are now seeing two Hantro blocks on the same chip. The static bus_info is no longer sufficient for differentiating devices. Since commit f2d8b691 ("media: v4l: ioctl: Set bus_info in v4l_querycap()"), the V4L2 core provides a default value for the bus_info field for platform and PCI devices. This value will match the default value for media devices added by commit cef69974 ("media: mc: Set bus_info in media_device_init()"). These defaults are stable and device-specific. Drop the static bus_info values from the hantro driver and use the defaults. Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Reviewed-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
-
Yunfei Dong authored
pm_runtime_put will set RPM_ASYNC flag then queue an idle-notification request again, won't return error immediately until current request is scheduled. But pm_runtime_put_sync run the ->runtime_idle() callback directly, return error immediately no matter whether current request is scheduled. Signed-off-by:
Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by:
-
Ming Qian authored
in the E.2.1 of Rec. ITU-T H.264 (06/2019), 0 of colour primaries is reserved, and 2 is unspecified. driver can map V4L2_COLORSPACE_LAST to 0, and map V4L2_COLORSPACE_DEFAULT to 2. v4l2_xfer_func and v4l2_ycbcr_encoding are similar case. Fixes: 3cd08451 ("media: amphion: add vpu v4l2 m2m support") Signed-off-by:
Ming Qian <ming.qian@nxp.com> Signed-off-by:
-
Ming Qian authored
using the api of clk_bulk can simplify the code. and the clock of the jpeg codec may be changed, the clk_bulk api can be compatible with the future change. Fixes: 4c2e5156 ("media: imx-jpeg: Add pm-runtime support for imx-jpeg") Signed-off-by:
-
Oleg Verych authored
When removing the module, balance PM runtime enable with the corresponding disable call. Signed-off-by:
Oleg Verych <olecom@gmail.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the const arrays on the stack, instead make them static. Also makes the object code smaller. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the read-only const array DURATION on the stack but instead make it static. Also makes the object code a little smaller. Signed-off-by:
-
Deepak R Varma authored
At present, the function imx_media_fim_set_stream() always returns 0. So, convert it to be a function returning void instead. Issue identified using the returnvar.cocci Coccinelle semantic patch. Signed-off-by:
Deepak R Varma <drv@mailo.com> Reviewed-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
-
Nicolas Dufresne authored
Since 79c987de, enumerating framesize on format set with "MODE_NONE" (any raw formats) is reporting an invalid frmsize. Size: Stepwise 0x0 - 0x0 with step 0/0 Before this change, the driver would return EINVAL, which is also invalid but worked in GStreamer. The original intent was not to implement it, hence the -ENOTTY return in this change. While drivers should implement ENUM_FRMSIZE for all formats and queues, this change is limited in scope to fix the regression. This fixes taking picture in Gnome Cheese software, or any software using GSteamer to encode JPEG with hardware acceleration. Fixes: 79c987de ("media: hantro: Use post processor scaling capacities") Reported-by:
Robert Mader <robert.mader@collabora.com> Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by:
-
Zhou jie authored
The void * type pointer does not need to be cast. Signed-off-by:
Zhou jie <zhoujie@nfschina.com> Signed-off-by:
-
Ming Qian authored
The legal identifier of APP14 is "Adobe\0", but sometimes it may be "This is an unknown APP marker . Compliant decoders must ignore it." In this case, just ignore it. It won't affect the decode result. Fixes: b8035f79 ("media: Add parsing for APP14 data segment in jpeg helpers") Signed-off-by:
-
Ming Qian authored
The curr pointer has advanced 14 bytes in jpeg_parse_app14_data. 1. jpeg_get_word_be(stream), it goes forward 2 bytes. 2. jpeg_skip(stream, 11), it goes forward 11 bytes. 3. jpeg_get_byte(stream), it goes forward 1 bytes. so the remain bytes of this segment should be (lp - 2 - 11 - 1), but not (lp - 2 - 11). if driver skip 1 extra bytes, the following parsing may go wrong. Fixes: b8035f79 ("media: Add parsing for APP14 data segment in jpeg helpers") Signed-off-by:
-
Arnd Bergmann authored
The new mdp3 driver uses 'select' to force-enable a couple of drivers it depends on. This is error-prone and likely to cause dependency loops as well as warnings like: WARNING: unmet direct dependencies detected for VIDEO_MEDIATEK_VPU Depends on [n]: MEDIA_SUPPORT [=m] && MEDIA_PLATFORM_SUPPORT [=y] && MEDIA_PLATFORM_DRIVERS [=y] && V4L_MEM2MEM_DRIVERS [=n] && VIDEO_DEV [=m] && (ARCH_MEDIATEK [=y] || COMPILE_TEST [=y]) Selected by [m]: - VIDEO_MEDIATEK_MDP3 [=m] && MEDIA_SUPPORT [=m] && MEDIA_PLATFORM_SUPPORT [=y] && MEDIA_PLATFORM_DRIVERS [=y] && (MTK_IOMMU [=m] || COMPILE_TEST [=y]) && VIDEO_DEV [=m] && (ARCH_MEDIATEK [=y] || COMPILE_TEST [=y]) && HAS_DMA [=y] && REMOTEPROC [=y] This specific warning was already addressed in a previous patch, but there are similar unnecessary 'select' statements, so turn those into 'depends on'. This also means the dependency on ARCH_MEDIATEK is redundant and can be dropped. Fixes: 61890cca ("media: platform: mtk-mdp3: add MediaTek MDP3 driver") Fixes: 9195a860 ("media: platform: mtk-mdp3: remove unused VIDEO_MEDIATEK_VPU config") Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
-
Arnd Bergmann authored
Marking a case of the switch statement as unreachable means the compiler treats it as undefined behavior, which is then caught by an objtool warning: drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.o: warning: objtool: csiphy_lanes_enable() falls through to next function csiphy_lanes_disable() Instead of simply continuing execution at a random place of the driver, print a warning and return from to the caller, which makes it possible to understand what happens and avoids the warning. Fixes: 53655d2a ("media: camss: csiphy-3ph: add support for SM8250 CSI DPHY") Signed-off-by:
Robert Foss <robert.foss@linaro.org> Signed-off-by:
-
- 06 Feb, 2023 10 commits
-
-
Uwe Kleine-König authored
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by:
Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Uwe Kleine-König authored
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by:
-
Hans Verkuil authored
The streaming state is maintained by the vb2 core, so drivers must never change it themselves. Signed-off-by:
-
Hans Verkuil authored
Don't touch q->streaming directly, use the vb2_is_streaming() function instead. Signed-off-by:
-
Hans Verkuil authored
Don't touch q->streaming directly, use the vb2_is_streaming() function instead. Signed-off-by:
-
Jammy Huang authored
Use URL rather than plain text. Signed-off-by:
Jammy Huang <jammy_huang@aspeedtech.com> Signed-off-by:
-
Jammy Huang authored
Use URL rather than plain text. Signed-off-by:
-
Krzysztof Kozlowski authored
The field 'pctrl' in 'struct fimc_is' is not used, just like linux/pinctrl/consumer.h headers in the headers. Signed-off-by:
-
Krzysztof Kozlowski authored
The bindings expect "cec" for HDMI CEC node. Signed-off-by:
-
