- 14 Mar, 2019 40 commits
-
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit fa89a459 ] gcc warn this: net/ipv6/xfrm6_tunnel.c:143 __xfrm6_tunnel_alloc_spi() warn: always true condition '(spi <= 4294967295) => (0-u32max <= u32max)' 'spi' is u32, which always not greater than XFRM6_TUNNEL_SPI_MAX because of wrap around. So the second forloop will never reach. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Johannes Berg authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit efc38dd7 ] Due to the alignment handling, it actually matters where in the code we add the 4 bytes for the presence bitmap to the length; the first field is the timestamp with 8 byte alignment so we need to add the space for the extra vendor namespace presence bitmap *before* we do any alignment for the fields. Move the presence bitmap length accounting to the right place to fix the alignment for the data properly. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Christophe Leroy authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 05a4ab82 ] With the following piece of code, the following compilation warning is encountered: if (_IOC_DIR(ioc) != _IOC_NONE) { int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE : VERIFY_READ; if (!access_ok(verify, ioarg, _IOC_SIZE(ioc))) { drivers/platform/test/dev.c: In function 'my_ioctl': drivers/platform/test/dev.c:219:7: warning: unused variable 'verify' [-Wunused-variable] int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE : VERIFY_READ; This patch fixes it by referencing 'type' in the macro allthough doing nothing with it. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Mark Rutland authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 0d640732 ] When we emulate an MMIO instruction, we advance the CPU state within decode_hsr(), before emulating the instruction effects. Having this logic in decode_hsr() is opaque, and advancing the state before emulation is problematic. It gets in the way of applying consistent single-step logic, and it prevents us from being able to fail an MMIO instruction with a synchronous exception. Clean this up by only advancing the CPU state *after* the effects of the instruction are emulated. Cc: Peter Maydell <peter.maydell@linaro.org> Reviewed-by:
Alex Bennée <alex.bennee@linaro.org> Reviewed-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Beomho Seo authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 31e93364 ] Commit 391f93f2 ("serial: core: Rework hw-assited flow control support") has changed the way the autoCTS mode is handled. According to that change, serial drivers which enable H/W autoCTS mode must set UPSTAT_AUTOCTS to prevent the serial core from inadvertently disabling TX. This patch adds proper handling of UPSTAT_AUTOCTS flag. Signed-off-by:
Beomho Seo <beomho.seo@samsung.com> [mszyprow: rephrased commit message] Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit e03e303e ] We can use MEMSTICK_POWER_{ON,OFF} along with pm_runtime_{get,put} helpers to let memstick host support runtime pm. The rpm count may go down to zero before the memstick host powers on, so the host can be runtime suspended. So before doing card detection, increment the rpm count to avoid the host gets runtime suspended. Balance the rpm count after card detection is done. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Fabio Estevam authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit add68836 ] eukrea-tlv320.c machine driver runs on non-DT platforms and include <asm/mach-types.h> header file in order to be able to use some machine_is_eukrea_xxx() macros. Building it for ARM64 causes the following build error: sound/soc/fsl/eukrea-tlv320.c:28:10: fatal error: asm/mach-types.h: No such file or directory Avoid this error by not allowing to build the SND_SOC_EUKREA_TLV320 driver when ARM64 is selected. This is needed in preparation for the i.MX8M support. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 88af3209 ] WARNING: vmlinux.o(.text+0x19f90): Section mismatch in reference from the function littleton_init_lcd() to the function .init.text:pxa_set_fb_info() The function littleton_init_lcd() references the function __init pxa_set_fb_info(). This is often because littleton_init_lcd lacks a __init annotation or the annotation of pxa_set_fb_info is wrong. WARNING: vmlinux.o(.text+0xf824): Section mismatch in reference from the function zeus_register_ohci() to the function .init.text:pxa_set_ohci_info() The function zeus_register_ohci() references the function __init pxa_set_ohci_info(). This is often because zeus_register_ohci lacks a __init annotation or the annotation of pxa_set_ohci_info is wrong. WARNING: vmlinux.o(.text+0xf95c): Section mismatch in reference from the function cm_x300_init_u2d() to the function .init.text:pxa3xx_set_u2d_info() The function cm_x300_init_u2d() references the function __init pxa3xx_set_u2d_info(). This is often because cm_x300_init_u2d lacks a __init annotation or the annotation of pxa3xx_set_u2d_info is wrong. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Jan Kara authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit d288d958 ] When inode is corrupted so that extent type is invalid, some functions (such as udf_truncate_extents()) will just BUG. Check that extent type is valid when loading the inode to memory. Reported-by:
Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 4f5c85fe ] It was observed that when using seqentional mode contrary to the documentation, the SS bit (which is supposed to only be set if automatic/sequence command completed normally), is sometimes set together with NA (NAK in address phase) causing transfer to falsely be considered successful. My assumption is that this does not happen during manual mode since the controller is stopping its work the moment it sets NA/ND bit in status register. This is not the case in Automatic/Sequentional mode where it is still working to send STOP condition and the actual status we get depends on the time when the ISR is run. This patch changes the order of checking status bits in ISR - error conditions are checked first and only if none of them occurred, the transfer may be considered successful. This is required to introduce using of sequentional mode in next patch. Signed-off-by:
Krzysztof Adamski <krzysztof.adamski@nokia.com> Reviewed-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Yangtao Li authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 9456823c ] of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. bl_idle_init() doesn't do that, so fix it. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Acked-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Anson Huang authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 0efcc2c0 ] Same as other i.MX6 SoCs, ensure unused MMDC channel's handshake is bypassed, this is to make sure no request signal will be generated when periphe_clk_sel is changed or SRC warm reset is triggered. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Sergei Shtylyov authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 9f83cfdb ] The driver overrides the error codes returned by platform_get_irq() to -EINVAL, so if it returns -EPROBE_DEFER, the driver would fail the probe permanently instead of the deferred probing. Switch to propagating the error code upstream, still checking/overriding IRQ0 as libata regards it as "no IRQ" (thus polling) anyway... Fixes: 9ec36caf ("of/irq: do irq resolution in platform_get_irq") Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Will Deacon authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit a868e853 ] After removing an entry from a queue (e.g. reading an event in arm_smmu_evtq_thread()) it is necessary to advance the MMIO consumer pointer to free the queue slot back to the SMMU. A memory barrier is required here so that all reads targetting the queue entry have completed before the consumer pointer is updated. The implementation of queue_inc_cons() relies on a writel() to complete the previous reads, but this is incorrect because writel() is only guaranteed to complete prior writes. This patch replaces the call to writel() with an mb(); writel_relaxed() sequence, which gives us the read->write ordering which we require. Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Jiong Wang authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 17f6c83f ] For micro-mips, srlv inside POOL32A encoding space should use 0x50 sub-opcode, NOT 0x90. Some early version ISA doc describes the encoding as 0x90 for both srlv and srav, this looks to me was a typo. I checked Binutils libopcode implementation which is using 0x50 for srlv and 0x90 for srav. v1->v2: - Keep mm_srlv32_op sorted by value. Fixes: f31318fd ("MIPS: uasm: Add srlv uasm instruction") Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Jiong Wang <jiong.wang@netronome.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Russell King - ARM Linux authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 84fb6c7f ] It was noticed that unbinding and rebinding the KSZ8851 ethernet resulted in the driver reporting "failed to read device ID" at probe. Probing the reset line with a 'scope while repeatedly attempting to bind the driver in a shell loop revealed that the KSZ8851 RSTN pin is constantly held at zero, meaning the device is held in reset, and does not respond on the SPI bus. Experimentation with the startup delay on the regulator set to 50ms shows that the reset is positively released after 20ms. Schematics for this board are not available, and the traces are buried in the inner layers of the board which makes tracing where the RSTN pin extremely difficult. We can only guess that the RSTN pin is wired to a reset generator chip driven off the ethernet supply, which fits the observed behaviour. Include this delay in the regulator startup delay - effectively treating the reset as a "supply stable" indicator. This can not be modelled as a delay in the KSZ8851 driver since the reset generation is board specific - if the RSTN pin had been wired to a GPIO, reset could be released earlier via the already provided support in the KSZ8851 driver. This also got confirmed by Peter Ujfalusi <peter.ujfalusi@ti.com> based on Blaze schematics that should be very close to SDP4430: TPS22902YFPR is used as the regulator switch (gpio48 controlled): Convert arm boot_lock to raw The VOUT is routed to TPS3808G01DBV. (SCH Note: Threshold set at 90%. Vsense: 0.405V). According to the TPS3808 data sheet the RESET delay time when Ct is open (this is the case in the schema): MIN/TYP/MAX: 12/20/28 ms. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> [tony@atomide.com: updated with notes from schematics from Peter] Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Bart Van Assche authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit ce10a5b3 ] tk_core.seq is initialized open coded, but that misses to initialize the lockdep map when lockdep is enabled. Lockdep splats involving tk_core seq consequently lack a name and are hard to read. Use the proper initializer which takes care of the lockdep map initialization. [ tglx: Massaged changelog ] Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Cc: tj@kernel.org Cc: johannes.berg@intel.com Link: https://lkml.kernel.org/r/20181128234325.110011-12-bvanassche@acm.orgSigned-off-by:
-
Mathias Nyman authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit e8610894 ] When initializing a hub we want to give a USB3 port in link training the same debounce delay time before autosuspening the hub as already trained, connected enabled ports. USB3 ports won't reach the enabled state with "current connect status" and "connect status change" bits set until the USB3 link training finishes. Catching the port in link training (polling) and adding the debounce delay prevents unnecessary failed attempts to autosuspend the hub. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Zoran Markovic authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 5b841bfa ] Function smack_key_permission() only issues smack requests for the following operations: - KEY_NEED_READ (issues MAY_READ) - KEY_NEED_WRITE (issues MAY_WRITE) - KEY_NEED_LINK (issues MAY_WRITE) - KEY_NEED_SETATTR (issues MAY_WRITE) A blank smack request is issued in all other cases, resulting in smack access being granted if there is any rule defined between subject and object, or denied with -EACCES otherwise. Request MAY_READ access for KEY_NEED_SEARCH and KEY_NEED_VIEW. Fix the logic in the unlikely case when both MAY_READ and MAY_WRITE are needed. Validate access permission field for valid contents. Signed-off-by:
Zoran Markovic <zmarkovic@sierrawireless.com> Signed-off-by:
Casey Schaufler <casey@schaufler-ca.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Signed-off-by:
-
Alexey Khoroshilov authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit aa35dc3c ] If vpbe_set_default_output() or vpbe_set_default_mode() fails, vpbe_initialize() returns error code without releasing resources. The patch adds error handling for that case. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Sebastian Andrzej Siewior authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 6637401c ] Every user of user_insn() passes an user memory pointer to this macro. Add might_fault() to user_insn() so we can spot users which are using this macro in sections where page faulting is not allowed. [ bp: Space it out to make it more visible. ] Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Rik van Riel <riel@surriel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm ML <kvm@vger.kernel.org> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20181128222035.2996-6-bigeasy@linutronix.deSigned-off-by:
-
Lubomir Rintel authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 1147e05a ] Marvell keeps their MMP2 datasheet secret, but there are good clues that TWSI2 is not on 0xd4025000 on that platform, not does it use IRQ 58. In fact, the IRQ 58 on MMP2 seems to be a signal processor: arch/arm/mach-mmp/irqs.h:#define IRQ_MMP2_MSP 58 I'm taking a somewhat educated guess that is probably a copy & paste error from PXA168 or PXA910 and that the real controller in fact hides at address 0xd4031000 and uses an interrupt line multiplexed via IRQ 17. I'm also copying some properties from TWSI1 that were missing or incorrect. Tested on a OLPC XO 1.75 machine, where the RTC is on TWSI2. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Tested-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Mark Rutland authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 6e803e2e ] The core ftrace code requires that when it is handed the PC of an instrumented function, this PC is the address of the instrumented instruction. This is necessary so that the core ftrace code can identify the specific instrumentation site. Since the instrumented function will be a BL, the address of the instrumented function is LR - 4 at entry to the ftrace code. This fixup is applied in the mcount_get_pc and mcount_get_pc0 helpers, which acquire the PC of the instrumented function. The mcount_get_lr helper is used to acquire the LR of the instrumented function, whose value does not require this adjustment, and cannot be adjusted to anything meaningful. No adjustment of this value is made on other architectures, including arm. However, arm64 adjusts this value by 4. This patch brings arm64 in line with other architectures and removes the adjustment of the LR value. Signed-off-by:
-
J. Bruce Fields authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 62a063b8 ] Anatoly Trosinenko reports that this: 1) Checkout fresh master Linux branch (tested with commit e195ca6c) 2) Copy x84_64-config-4.14 to .config, then enable NFS server v4 and build 3) From `kvm-xfstests shell`: results in NULL dereference in locks_end_grace. Check that nfsd has been started before trying to end the grace period. Reported-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Young Xiao authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit a11f6ca9 ] __vdc_tx_trigger should only loop on EAGAIN a finite number of times. See commit adddc32d ("sunvnet: Do not spin in an infinite loop when vio_ldc_send() returns EAGAIN") for detail. Signed-off-by:
Young Xiao <YangX92@hotmail.com> Signed-off-by:
-
Tiezhu Yang authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit f6176473 ] When call f2fs_acl_create_masq() failed, the caller f2fs_acl_create() should return -EIO instead of -ENOMEM, this patch makes it consistent with posix_acl_create() which has been fixed in commit beaf226b ("posix_acl: don't ignore return value of posix_acl_create_masq()"). Fixes: 83dfe53c ("f2fs: fix reference leaks in f2fs_acl_create") Signed-off-by:
Tiezhu Yang <kernelpatch@126.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Yunlei He authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit b61ac5b7 ] This patch move dir data flush to write checkpoint process, by doing this, it may reduce some time for dir fsync. pre: -f2fs_do_sync_file enter -file_write_and_wait_range <- flush & wait -write_checkpoint -do_checkpoint <- wait all -f2fs_do_sync_file exit now: -f2fs_do_sync_file enter -write_checkpoint -block_operations <- flush dir & no wait -do_checkpoint <- wait all -f2fs_do_sync_file exit Signed-off-by:
Yunlei He <heyunlei@huawei.com> Signed-off-by:
-
Yangtao Li authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 9eb40fa2 ] of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. soc_is_tegra() doesn't do that, so fix it. Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> [treding: slightly rewrite to avoid inline comparison] Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Pu Wen authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 4787eff3 ] The tool perf is useful for the performance analysis on the Hygon Dhyana platform. But right now there is no Hygon support for it to analyze the KVM guest os data. So add Hygon Dhyana support to it by checking vendor string to share the code path of AMD. Signed-off-by:
Pu Wen <puwen@hygon.cn> Acked-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Sami Tolvanen authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 5818c683 ] If an ARM mapping symbol shares an address with a valid symbol, find_elf_symbol can currently return the mapping symbol instead, as the symbol is not validated. This can result in confusing warnings: WARNING: vmlinux.o(.text+0x18f4028): Section mismatch in reference from the function set_reset_devices() to the variable .init.text:$x.0 This change adds a call to is_valid_name to find_elf_symbol, similarly to how it's already used in find_elf_symbol2. Signed-off-by:
Sami Tolvanen <samitolvanen@google.com> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit c10b26ab ] When building the kernel with Clang, the following section mismatch warnings appears: WARNING: vmlinux.o(.text+0x2d398): Section mismatch in reference from the function _setup() to the function .init.text:_setup_iclk_autoidle() The function _setup() references the function __init _setup_iclk_autoidle(). This is often because _setup lacks a __init annotation or the annotation of _setup_iclk_autoidle is wrong. WARNING: vmlinux.o(.text+0x2d3a0): Section mismatch in reference from the function _setup() to the function .init.text:_setup_reset() The function _setup() references the function __init _setup_reset(). This is often because _setup lacks a __init annotation or the annotation of _setup_reset is wrong. WARNING: vmlinux.o(.text+0x2d408): Section mismatch in reference from the function _setup() to the function .init.text:_setup_postsetup() The function _setup() references the function __init _setup_postsetup(). This is often because _setup lacks a __init annotation or the annotation of _setup_postsetup is wrong. _setup is used in omap_hwmod_allocate_module, which isn't marked __init and looks like it shouldn't be, meaning to fix these warnings, those functions must be moved out of the init section, which this patch does. Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Renato Lui Geh authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 336650c7 ] The ad7780 driver previously did not read the correct device output, as it read an outdated value set at initialization. It now updates its voltage on read. Signed-off-by:
Renato Lui Geh <renatogeh@gmail.com> Acked-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Matheus Tavares authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit b3a3eafe ] Previously, ad2s90_probe ignored the return code from spi_setup, not handling its possible failure. This patch makes ad2s90_probe check if the code is an error code and, if so, do the following: - Call dev_err with an appropriate error message. - Return the spi_setup's error code. Note: The 'return ret' statement could be out of the 'if' block, but this whole block will be moved up in the function in the patch: 'staging:iio:ad2s90: Move device registration to the end of probe'. Signed-off-by:
Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by:
-
Miroslav Lichvar authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 83d0bdc7 ] If a gettime64 call fails, return the error and avoid copying data back to user. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Andy Duan authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 397bd921 ] Current driver only enable parity enable bit and never clear it when user set the termios. The fix clear the parity enable bit when PARENB flag is not set in termios->c_cflag. Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by:
Andy Duan <fugang.duan@nxp.com> Reviewed-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Frank Rowand authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 5b3f5c40 ] The previous commit, "of: overlay: add missing of_node_get() in __of_attach_node_sysfs" added a missing of_node_get() to __of_attach_node_sysfs(). This results in a refcount imbalance for nodes attached with dlpar_attach_node(). The calling sequence from dlpar_attach_node() to __of_attach_node_sysfs() is: dlpar_attach_node() of_attach_node() __of_attach_node_sysfs() For more detailed description of the node refcount, see commit 68baf692 ("powerpc/pseries: Fix of_node_put() underflow during DLPAR remove"). Tested-by:
Alan Tull <atull@kernel.org> Acked-by:
Frank Rowand <frank.rowand@sony.com> Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 53bb565f ] In the expression "word1 << 16", word1 starts as u16, but is promoted to a signed int, then sign-extended to resource_size_t, which is probably not what was intended. Cast to resource_size_t to avoid the sign extension. This fixes an identical issue as fixed by commit 0b2d7076 ("x86/PCI: Fix Broadcom CNB20LE unintended sign extension") back in 2014. Detected by CoverityScan, CID#138749, 138750 ("Unintended sign extension") Fixes: 3f6ea84a ("PCI: read memory ranges out of Broadcom CNB20LE host bridge") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Bjorn Helgaas <helgaas@kernel.org> Signed-off-by:
-
Bob Peterson authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 216f0efd ] Before this patch, recovery would cause all callbacks to be delayed, put on a queue, and afterward they were all queued to the callback work queue. This patch does the same thing, but occasionally takes a break after 25 of them so it won't swamp the CPU at the expense of other RT processes like corosync. Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
David Teigland <teigland@redhat.com> Signed-off-by:
-
Yufen Wang authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 82c08c3e ] In case panic() and panic() called at the same time on different CPUS. For example: CPU 0: panic() __crash_kexec machine_crash_shutdown crash_smp_send_stop machine_kexec BUG_ON(num_online_cpus() > 1); CPU 1: panic() local_irq_disable panic_smp_self_stop If CPU 1 calls panic_smp_self_stop() before crash_smp_send_stop(), kdump fails. CPU1 can't receive the ipi irq, CPU1 will be always online. To fix this problem, this patch split out the panic_smp_self_stop() and add set_cpu_online(smp_processor_id(), false). Signed-off-by:
Yufen Wang <wangyufen@huawei.com> Signed-off-by:
-
James Smart authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit b114d900 ] When LCB's are rejected, if beaconing was already in progress, the Reason Code Explanation was not being set. Should have been set to command in progress. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
