- 15 Apr, 2019 14 commits
-
-
Kangjie Lu authored
In case spi_sync_locked fails, the fix reports the error and returns the error code upstream. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Yangbo Lu authored
For some controllers, in Present State Register, Data Line Active bit is not reliable for commands (such as CMD6, CMD7, CMD12, CMD28, CMD29, or CMD38) with busy signal. DLA affects Command with Data Inhibit bit. Therefore, software driver may not know the busy status in DLA/CDIHB. Futunately MMC core driver has already polled card status with CMD13 after sending any command with busy signal. So we can just ignore CDIHB never released issue for such controllers. This patch is to add a quirk to handle this. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Yinbo Zhu authored
Invalid Transfer Complete (IRQSTAT[TC]) bit could be set during multi-write operation even when the BLK_CNT in BLKATTR register has not reached zero. Therefore, Transfer Complete might be reported twice due to this erratum since a valid Transfer Complete occurs when BLK_CNT reaches zero. This erratum is to fix this issue Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Yinbo Zhu authored
In the event of that any data error (like, IRQSTAT[DCE]) occurs during an eSDHC data transaction where DMA is used for data transfer to/from the system memory, setting the SYSCTL[RSTD] register may cause a system hang. If software sets the register SYSCTL[RSTD] to 1 for error recovery while DMA transferring is not complete, eSDHC may hang the system bus. This happens because the software register SYSCTL[RSTD] resets the DMA engine without waiting for the completion of pending system transactions. This erratum is to fix this issue. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Yinbo Zhu authored
eSDHC-A001: The data timeout counter (SYSCTL[DTOCV]) is not reliable for DTOCV values 0x4(2^17 SD clock), 0x8(2^21 SD clock), and 0xC(2^25 SD clock). The data timeout counter can count from 2^13–2^27, but for values 2^17, 2^21, and 2^25, the timeout counter counts for only 2^13 SD clocks. A-008358: The data timeout counter value loaded into the timeout counter is less than expected and can result into early timeout error in case of eSDHC data transactions. The table below shows the expected vs actual timeout period for different values of SYSCTL[DTOCV]: these two erratum has the same quirk to control it, and set SDHCI_QUIRK_RESET_AFTER_REQUEST to fix above issue. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Yinbo Zhu authored
Software writing to the Transfer Type configuration register (system clock domain) can cause a setup/hold violation in the CRC flops (card clock domain), which can cause write accesses to be sent with corrupt CRC values. This issue occurs only for write preceded by read. this erratum is to fix this issue. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Yinbo Zhu authored
This patch is to add erratum A011334 support in lx2160 2.0 SoC Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Enrico Weigelt, metux IT consult authored
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Ulf Hansson authored
As mmci_variant_init() is a local function to mmci.c, let's convert it into static. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
-
Ulf Hansson authored
It's good practice to share functions via header files, rather than from the c-files. Therefore, let's move sdmmc_variant_init() to mmci.h. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Ludovic Barre <ludovic.barre@st.com> Tested-by: Ludovic Barre <ludovic.barre@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
-
Ulf Hansson authored
It seems a bit silly to have a header file to share only the qcom_variant_init() function. So, let's just drop it and move the declaration of the function into the common mmci.h instead. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
-
Ulf Hansson authored
Having mmci_dmae_start() to invoke the shared function, dml_start_xfer(), explicitly for the qcom variant isn't very nice. Let's clean up this code by moving the qcom specific parts into the qcom ->dma_start() callback and then drop dml_start_xfer() altogether. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
-
Ulf Hansson authored
There's no point clearing the variant flag in case the qcom variant fails to setup DMA. This is because if mmci_dma_setup() fails, then the use_dma flag remains set to false, which leads to mmci using PIO mode and not DMA. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
-
Ulf Hansson authored
Some of the DMA functions are shared via mmci.h, however they are not implemented unless CONFIG_DMA_ENGINE is set. Therefore, add that constraint to the header file as well. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
-
- 14 Apr, 2019 6 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge page ref overflow branch. Jann Horn reported that he can overflow the page ref count with sufficient memory (and a filesystem that is intentionally extremely slow). Admittedly it's not exactly easy. To have more than four billion references to a page requires a minimum of 32GB of kernel memory just for the pointers to the pages, much less any metadata to keep track of those pointers. Jann needed a total of 140GB of memory and a specially crafted filesystem that leaves all reads pending (in order to not ever free the page references and just keep adding more). Still, we have a fairly straightforward way to limit the two obvious user-controllable sources of page references: direct-IO like page references gotten through get_user_pages(), and the splice pipe page duplication. So let's just do that. * branch page-refs: fs: prevent page refcount overflow in pipe_buf_get mm: prevent get_user_pages() from overflowing page refcount mm: add 'try_get_page()' helper function mm: make page ref count overflow check tighter and more explicit
-
Matthew Wilcox authored
Change pipe_buf_get() to return a bool indicating whether it succeeded in raising the refcount of the page (if the thing in the pipe is a page). This removes another mechanism for overflowing the page refcount. All callers converted to handle a failure. Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Matthew Wilcox <willy@infradead.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
If the page refcount wraps around past zero, it will be freed while there are still four billion references to it. One of the possible avenues for an attacker to try to make this happen is by doing direct IO on a page multiple times. This patch makes get_user_pages() refuse to take a new page reference if there are already more than two billion references to the page. Reported-by: Jann Horn <jannh@google.com> Acked-by: Matthew Wilcox <willy@infradead.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This is the same as the traditional 'get_page()' function, but instead of unconditionally incrementing the reference count of the page, it only does so if the count was "safe". It returns whether the reference count was incremented (and is marked __must_check, since the caller obviously has to be aware of it). Also like 'get_page()', you can't use this function unless you already had a reference to the page. The intent is that you can use this exactly like get_page(), but in situations where you want to limit the maximum reference count. The code currently does an unconditional WARN_ON_ONCE() if we ever hit the reference count issues (either zero or negative), as a notification that the conditional non-increment actually happened. NOTE! The count access for the "safety" check is inherently racy, but that doesn't matter since the buffer we use is basically half the range of the reference count (ie we look at the sign of the count). Acked-by: Matthew Wilcox <willy@infradead.org> Cc: Jann Horn <jannh@google.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
We have a VM_BUG_ON() to check that the page reference count doesn't underflow (or get close to overflow) by checking the sign of the count. That's all fine, but we actually want to allow people to use a "get page ref unless it's already very high" helper function, and we want that one to use the sign of the page ref (without triggering this VM_BUG_ON). Change the VM_BUG_ON to only check for small underflows (or _very_ close to overflowing), and ignore overflows which have strayed into negative territory. Acked-by: Matthew Wilcox <willy@infradead.org> Cc: Jann Horn <jannh@google.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 13 Apr, 2019 14 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Set of fixes that should go into this round. This pull is larger than I'd like at this time, but there's really no specific reason for that. Some are fixes for issues that went into this merge window, others are not. Anyway, this contains: - Hardware queue limiting for virtio-blk/scsi (Dongli) - Multi-page bvec fixes for lightnvm pblk - Multi-bio dio error fix (Jason) - Remove the cache hint from the io_uring tool side, since we didn't move forward with that (me) - Make io_uring SETUP_SQPOLL root restricted (me) - Fix leak of page in error handling for pc requests (Jérôme) - Fix BFQ regression introduced in this merge window (Paolo) - Fix break logic for bio segment iteration (Ming) - Fix NVMe cancel request error handling (Ming) - NVMe pull request with two fixes (Christoph): - fix the initial CSN for nvme-fc (James) - handle log page offsets properly in the target (Keith)" * tag 'for-linus-20190412' of git://git.kernel.dk/linux-block: block: fix the return errno for direct IO nvmet: fix discover log page when offsets are used nvme-fc: correct csn initialization and increments on error block: do not leak memory in bio_copy_user_iov() lightnvm: pblk: fix crash in pblk_end_partial_read due to multipage bvecs nvme: cancel request synchronously blk-mq: introduce blk_mq_complete_request_sync() scsi: virtio_scsi: limit number of hw queues by nr_cpu_ids virtio-blk: limit number of hw queues by nr_cpu_ids block, bfq: fix use after free in bfq_bfqq_expire io_uring: restrict IORING_SETUP_SQPOLL to root tools/io_uring: remove IOCQE_FLAG_CACHEHIT block: don't use for-inside-for in bio_for_each_segment_all
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable fix: - Fix a deadlock in close() due to incorrect draining of RDMA queues Bugfixes: - Revert "SUNRPC: Micro-optimise when the task is known not to be sleeping" as it is causing stack overflows - Fix a regression where NFSv4 getacl and fs_locations stopped working - Forbid setting AF_INET6 to "struct sockaddr_in"->sin_family. - Fix xfstests failures due to incorrect copy_file_range() return values" * tag 'nfs-for-5.1-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: Revert "SUNRPC: Micro-optimise when the task is known not to be sleeping" NFSv4.1 fix incorrect return value in copy_file_range xprtrdma: Fix helper that drains the transport NFS: Fix handling of reply page vector NFS: Forbid setting AF_INET6 to "struct sockaddr_in"->sin_family.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fix from James Bottomley: "One obvious fix for a ciostor data corruption on error bug" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: csiostor: fix missing data copy in csio_scsi_err_handler()
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "Here's more than a handful of clk driver fixes for changes that came in during the merge window: - Fix the AT91 sama5d2 programmable clk prescaler formula - A bunch of Amlogic meson clk driver fixes for the VPU clks - A DMI quirk for Intel's Bay Trail SoC's driver to properly mark pmc clks as critical only when really needed - Stop overwriting CLK_SET_RATE_PARENT flag in mediatek's clk gate implementation - Use the right structure to test for a frequency table in i.MX's PLL_1416x driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: imx: Fix PLL_1416X not rounding rates clk: mediatek: fix clk-gate flag setting platform/x86: pmc_atom: Drop __initconst on dmi table clk: x86: Add system specific quirk to mark clocks as critical clk: meson: vid-pll-div: remove warning and return 0 on invalid config clk: meson: pll: fix rounding and setting a rate that matches precisely clk: meson-g12a: fix VPU clock parents clk: meson: g12a: fix VPU clock muxes mask clk: meson-gxbb: round the vdec dividers to closest clk: at91: fix programmable clock for sama5d2
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: - Add a DMA alias quirk for another Marvell SATA device (Andre Przywara) - Fix a pciehp regression that broke safe removal of devices (Sergey Miroshnichenko) * tag 'pci-v5.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: pciehp: Ignore Link State Changes after powering off a slot PCI: Add function 1 DMA alias quirk for Marvell 9170 SATA controller
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "A minor build fix for 64-bit FLATMEM configs. A fix for a boot failure on 32-bit powermacs. My commit to fix CLOCK_MONOTONIC across Y2038 broke the 32-bit VDSO on 64-bit kernels, ie. compat mode, which is only used on big endian. The rewrite of the SLB code we merged in 4.20 missed the fact that the 0x380 exception is also used with the Radix MMU to report out of range accesses. This could lead to an oops if userspace tried to read from addresses outside the user or kernel range. Thanks to: Aneesh Kumar K.V, Christophe Leroy, Larry Finger, Nicholas Piggin" * tag 'powerpc-5.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Define MAX_PHYSMEM_BITS for all 64-bit configs powerpc/64s/radix: Fix radix segment exception handling powerpc/vdso32: fix CLOCK_MONOTONIC on PPC64 powerpc/32: Fix early boot failure with RTAS built-in
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "The main thing is a fix to our FUTEX_WAKE_OP implementation which was unbelievably broken, but did actually work for the one scenario that GLIBC used to use. Summary: - Fix stack unwinding so we ignore user stacks - Fix ftrace module PLT trampoline initialisation checks - Fix terminally broken implementation of FUTEX_WAKE_OP atomics" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value arm64: backtrace: Don't bother trying to unwind the userspace stack arm64/ftrace: fix inadvertent BUG() in trampoline check
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Fix typos in user-visible resctrl parameters, and also fix assembly constraint bugs that might result in miscompilation" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm: Use stricter assembly constraints in bitops x86/resctrl: Fix typos in the mba_sc mount option
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Ingo Molnar: "Fix the alarm_timer_remaining() return value" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: alarmtimer: Return correct remaining time
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Ingo Molnar: "Fix a NULL pointer dereference crash in certain environments" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Do not re-read ->h_load_next during hierarchical load calculation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Six kernel side fixes: three related to NMI handling on AMD systems, a race fix, a kexec initialization fix and a PEBS sampling fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix perf_event_disable_inatomic() race x86/perf/amd: Remove need to check "running" bit in NMI handler x86/perf/amd: Resolve NMI latency issues for active PMCs x86/perf/amd: Resolve race condition when disabling PMC perf/x86/intel: Initialize TFA MSR perf/x86/intel: Fix handling of wakeup_events for multi-entry PEBS
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fix from Ingo Molnar: "Fixes a crash when accessing /proc/lockdep" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Zap lock classes even with lock debugging disabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Ingo Molnar: "Two genirq fixes, plus an irqchip driver error handling fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Respect IRQCHIP_SKIP_SET_WAKE in irq_chip_set_wake_parent() genirq: Initialize request_mutex if CONFIG_SPARSE_IRQ=n irqchip/irq-ls1x: Missing error code in ls1x_intc_of_init()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core fixes from Ingo Molnar: "Fix an objtool warning plus fix a u64_to_user_ptr() macro expansion bug" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Add rewind_stack_do_exit() to the noreturn list linux/kernel.h: Use parentheses around argument in u64_to_user_ptr()
-
- 12 Apr, 2019 6 commits
-
-
Leonard Crestez authored
Code which initializes the "clk_init_data.ops" checks pll->rate_table before that field is ever assigned to so it always picks "clk_pll1416x_min_ops". This breaks dynamic rate rounding for features such as cpufreq. Fix by checking pll_clk->rate_table instead, here pll_clk refers to the constant initialization data coming from per-soc clk driver. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Fixes: 8646d4dc ("clk: imx: Add PLLs driver for imx8mm soc") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Weiyi Lu authored
CLK_SET_RATE_PARENT would be dropped. Merge two flag setting together to correct the error. Fixes: 5a1cc4c2 ("clk: mediatek: Add flags to mtk_gate") Cc: <stable@vger.kernel.org> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: "Fix a sparc64 sun4v_pci regression introduced in this merged window, and a dma-debug stracktrace regression from the big refactor last merge window" * tag 'dma-mapping-5.1-1' of git://git.infradead.org/users/hch/dma-mapping: dma-debug: only skip one stackframe entry sparc64/pci_sun4v: fix ATU checks for large DMA masks
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU fix from Joerg Roedel: "Fix an AMD IOMMU issue where the driver didn't correctly setup the exclusion range in the hardware registers, resulting in exclusion ranges being one page too big. This can cause data corruption of the address of that last page is used by DMA operations" * tag 'iommu-fix-v5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Set exclusion range correctly
-
git://github.com/ojeda/linuxLinus Torvalds authored
Pull clang-format update from Miguel Ojeda: "The usual roughly-per-release .clang-format macro list update" * tag 'clang-format-for-linus-v5.1-rc5' of git://github.com/ojeda/linux: clang-format: Update with the latest for_each macro list
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC host fixes from Ulf Hansson: - alcor: Stabilize data write requests - sdhci-omap: Fix command error path during tuning * tag 'mmc-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-omap: Don't finish_mrq() on a command error during tuning mmc: alcor: don't write data before command has completed
-