- 16 Jan, 2019 40 commits
-
-
Mathias Nyman authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 0472bf06 upstream. Don't allow USB3 U1 or U2 if the latency to wake up from the U-state reaches the service interval for a periodic endpoint. This is according to xhci 1.1 specification section 4.23.5.2 extra note: "Software shall ensure that a device is prevented from entering a U-state where its worst case exit latency approaches the ESIT." Allowing too long exit latencies for periodic endpoint confuses xHC internal scheduling, and new devices may fail to enumerate with a "Not enough bandwidth for new device state" error from the host. Cc: <stable@vger.kernel.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Chuck Lever authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 8dae5398 upstream. call_encode can be invoked more than once per RPC call. Ensure that each call to gss_wrap_req_priv does not overwrite pointers to previously allocated memory. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Cc: stable@kernel.org Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Halil Pasic authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 78b1a52e upstream. While ccw_io_helper() seems like intended to be exclusive in a sense that it is supposed to facilitate I/O for at most one thread at any given time, there is actually nothing ensuring that threads won't pile up at vcdev->wait_q. If they do, all threads get woken up and see the status that belongs to some other request than their own. This can lead to bugs. For an example see: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1788432 This race normally does not cause any problems. The operations provided by struct virtio_config_ops are usually invoked in a well defined sequence, normally don't fail, and are normally used quite infrequent too. Yet, if some of the these operations are directly triggered via sysfs attributes, like in the case described by the referenced bug, userspace is given an opportunity to force races by increasing the frequency of the given operations. Let us fix the problem by ensuring, that for each device, we finish processing the previous request before starting with a new one. Signed-off-by:
Halil Pasic <pasic@linux.ibm.com> Reported-by:
Colin Ian King <colin.king@canonical.com> Cc: stable@vger.kernel.org Message-Id: <20180925121309.58524-3-pasic@linux.ibm.com> Signed-off-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Halil Pasic authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 2448a299 upstream. Currently we have a race on vcdev->config in virtio_ccw_get_config() and in virtio_ccw_set_config(). This normally does not cause problems, as these are usually infrequent operations. However, for some devices writing to/reading from the config space can be triggered through sysfs attributes. For these, userspace can force the race by increasing the frequency. Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 5363857b upstream. As addressed in alsa-lib (commit b420056604f0), we need to fix the case where the evaluation of PCM interval "(x x+1]" leading to -EINVAL. After applying rules, such an interval may be translated as "(x x+1)". Fixes: ff2d6acd ("ALSA: pcm: Fix snd_interval_refine first/last with open min/max") Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit b51abed8 upstream. Currently the PCM core calls snd_pcm_unlink() always unconditionally at closing a stream. However, since snd_pcm_unlink() invokes the global rwsem down, the lock can be easily contended. More badly, when a thread runs in a high priority RT-FIFO, it may stall at spinning. Basically the call of snd_pcm_unlink() is required only for the linked streams that are already rare occasion. For normal use cases, this code path is fairly superfluous. As an optimization (and also as a workaround for the RT problem above in normal situations without linked streams), this patch adds a check before calling snd_pcm_unlink() and calls it only when needed. Reported-by:
Chanho Min <chanho.min@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Chanho Min authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit b888a5f7 upstream. Commit 67ec1072 ("ALSA: pcm: Fix rwsem deadlock for non-atomic PCM stream") fixes deadlock for non-atomic PCM stream. But, This patch causes antother stuck. If writer is RT thread and reader is a normal thread, the reader thread will be difficult to get scheduled. It may not give chance to release readlocks and writer gets stuck for a long time if they are pinned to single cpu. The deadlock described in the previous commit is because the linux rwsem queues like a FIFO. So, we might need non-FIFO writelock, not non-block one. My suggestion is that the writer gives reader a chance to be scheduled by using the minimum msleep() instaed of spinning without blocking by writer. Also, The *_nonblock may be changed to *_nonfifo appropriately to this concept. In terms of performance, when trylock is failed, this minimum periodic msleep will have the same performance as the tick-based schedule()/wake_up_q(). [ Although this has a fairly high performance penalty, the relevant code path became already rare due to the previous commit ("ALSA: pcm: Call snd_pcm_unlink() conditionally at closing"). That is, now this unconditional msleep appears only when using linked streams, and this must be a rare case. So we accept this as a quick workaround until finding a more suitable one -- tiwai ] Fixes: 67ec1072 ("ALSA: pcm: Fix rwsem deadlock for non-atomic PCM stream") Suggested-by:
Wonmin Jung <wonmin.jung@lge.com> Signed-off-by:
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 3deef52c upstream. It's similar to other AMD audio devices, it also supports D3, which can save some power drain. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hui Peng authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 5f8cf712 upstream. If a USB sound card reports 0 interfaces, an error condition is triggered and the function usb_audio_probe errors out. In the error path, there was a use-after-free vulnerability where the memory object of the card was first freed, followed by a decrement of the number of active chips. Moving the decrement above the atomic_dec fixes the UAF. [ The original problem was introduced in 3.1 kernel, while it was developed in a different form. The Fixes tag below indicates the original commit but it doesn't mean that the patch is applicable cleanly. -- tiwai ] Fixes: 362e4e49 ("ALSA: usb-audio - clear chip->probing on error exit") Reported-by:
Hui Peng <benquike@gmail.com> Reported-by:
Mathias Payer <mathias.payer@nebelwelt.net> Signed-off-by:
-
Mathias Payer authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 704620af upstream. When reading an extra descriptor, we need to properly check the minimum and maximum size allowed, to prevent from invalid data being sent by a device. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Alexander Theissen authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit d7859905 upstream. Add another Apple Cinema Display to the list of supported displays. Signed-off-by:
Alexander Theissen <alex.theissen@me.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Harry Pan authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 2f2dde6b upstream. Some lower volume SanDisk Ultra Flair in 16GB, which the VID:PID is in 0781:5591, will aggressively request LPM of U1/U2 during runtime, when using this thumb drive as the OS installation key we found the device will generate failure during U1 exit path making it dropped from the USB bus, this causes a corrupted installation in system at the end. i.e., [ 166.918296] hub 2-0:1.0: state 7 ports 7 chg 0000 evt 0004 [ 166.918327] usb usb2-port2: link state change [ 166.918337] usb usb2-port2: do warm reset [ 166.970039] usb usb2-port2: not warm reset yet, waiting 50ms [ 167.022040] usb usb2-port2: not warm reset yet, waiting 200ms [ 167.276043] usb usb2-port2: status 02c0, change 0041, 5.0 Gb/s [ 167.276050] usb 2-2: USB disconnect, device number 2 [ 167.276058] usb 2-2: unregistering device [ 167.276060] usb 2-2: unregistering interface 2-2:1.0 [ 167.276170] xhci_hcd 0000:00:15.0: shutdown urb ffffa3c7cc695cc0 ep1in-bulk [ 167.284055] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 167.284064] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 33 04 90 00 01 00 00 ... Analyzed the USB trace in the link layer we realized it is because of the 6-ms timer of tRecoveryConfigurationTimeout which documented on the USB 3.2 Revision 1.0, the section 7.5.10.4.2 of "Exit from Recovery.Configuration"; device initiates U1 exit -> Recovery.Active -> Recovery.Configuration, then the host timer timeout makes the link transits to eSS.Inactive -> Rx.Detect follows by a Warm Reset. Interestingly, the other higher volume of SanDisk Ultra Flair sharing the same VID:PID, such as 64GB, would not request LPM during runtime, it sticks at U0 always, thus disabling LPM does not affect those thumb drives at all. The same odd occures in SanDisk Ultra Fit 16GB, VID:PID in 0781:5583. Signed-off-by:
Harry Pan <harry.pan@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Yangtao Li authored
BugLink: https://bugs.launchpad.net/bugs/1811077 [ Upstream commit c44c749d ] of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place doesn't do that, so fix it. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Pan Bian authored
BugLink: https://bugs.launchpad.net/bugs/1811077 [ Upstream commit 829383e1 ] memunmap() should be used to free the return of memremap(), not iounmap(). Fixes: dfddb969 ('iommu/vt-d: Switch from ioremap_cache to memremap') Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Vincent Chen authored
BugLink: https://bugs.launchpad.net/bugs/1811077 [ Upstream commit 426a593e ] In the original ftmac100_interrupt(), the interrupts are only disabled when the condition "netif_running(netdev)" is true. However, this condition causes kerenl hang in the following case. When the user requests to disable the network device, kernel will clear the bit __LINK_STATE_START from the dev->state and then call the driver's ndo_stop function. Network device interrupts are not blocked during this process. If an interrupt occurs between clearing __LINK_STATE_START and stopping network device, kernel cannot disable the interrupts due to the condition "netif_running(netdev)" in the ISR. Hence, kernel will hang due to the continuous interruption of the network device. In order to solve the above problem, the interrupts of the network device should always be disabled in the ISR without being restricted by the condition "netif_running(netdev)". [V2] Remove unnecessary curly braces. Signed-off-by:
Vincent Chen <vincentc@andestech.com> Signed-off-by:
-
Aya Levin authored
BugLink: https://bugs.launchpad.net/bugs/1811077 [ Upstream commit a463146e ] UBSAN: Undefined behavior in drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:626:29 signed integer overflow: 1802201963 + 1802201963 cannot be represented in type 'int' The union of res_reserved and res_port_rsvd[MLX4_MAX_PORTS] monitors granting of reserved resources. The grant operation is calculated and protected, thus both members of the union cannot be negative. Changed type of res_reserved and of res_port_rsvd[MLX4_MAX_PORTS] from signed int to unsigned int, allowing large value. Fixes: 5a0d0a61 ("mlx4: Structures and init/teardown for VF resource quotas") Signed-off-by:
Aya Levin <ayal@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Tariq Toukan authored
BugLink: https://bugs.launchpad.net/bugs/1811077 [ Upstream commit 3ea7e7ea ] Initialize the uid variable to zero to avoid the compilation warning. Fixes: 7a89399f ("net/mlx4: Add mlx4_bitmap zone allocator") Signed-off-by:
-
Jack Morgenstein authored
BugLink: https://bugs.launchpad.net/bugs/1811077 [ Upstream commit bd85fbc2 ] When re-registering a user mr, the mpt information for the existing mr when running SRIOV is obtained via the QUERY_MPT fw command. The returned information includes the mpt's lkey. This retrieved mpt information is used to move the mpt back to hardware ownership in the rereg flow (via the SW2HW_MPT fw command when running SRIOV). The fw API spec states that for SW2HW_MPT, the lkey field must be zero. Any ConnectX-3 PF driver which checks for strict spec adherence will return failure for SW2HW_MPT if the lkey field is not zero (although the fw in practice ignores this field for SW2HW_MPT). Thus, in order to conform to the fw API spec, set the lkey field to zero before invoking SW2HW_MPT when running SRIOV. Fixes: e630664c ("mlx4_core: Add helper functions to support MR re-registration") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Denis Bolotin authored
BugLink: https://bugs.launchpad.net/bugs/1811077 [ Upstream commit ed4eac20 ] The value of "sb_index" is written by the hardware. Reading its value and writing it to "index" must finish before checking the loop condition. Signed-off-by:
Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by:
Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by:
-
Denis Bolotin authored
BugLink: https://bugs.launchpad.net/bugs/1811077 [ Upstream commit 9aaa4e8b ] Release PTT before entering error flow. Signed-off-by:
-
Sudarsana Reddy Kalluru authored
BugLink: https://bugs.launchpad.net/bugs/1811077 [ Upstream commit 77e461d1 ] Driver assigns DMAE channel 0 for FW as part of START_RAMROD command. FW uses this channel for DMAE operations (e.g., TIME_SYNC implementation). Driver also uses the same channel 0 for DMAE operations for some of the PFs (e.g., PF0 on Port0). This could lead to concurrent access to the DMAE channel by FW and driver which is not legal. Hence need to assign unique DMAE id for FW. Currently following DMAE channels are used by the clients, MFW - OCBB/OCSD functionality uses DMAE channel 14/15 Driver 0-3 and 8-11 (for PF dmae operations) 4 and 12 (for stats requests) Assigning unique dmae_id '13' to the FW. Changes from previous version: ------------------------------ v2: Incorporated the review comments. Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
-
Sven Eckelmann authored
BugLink: https://bugs.launchpad.net/bugs/1811077 [ Upstream commit d7d8bbb4 ] The complete size ("total_size") of the fragmented packet is stored in the fragment header and in the size of the fragment chain. When the fragments are ready for merge, the skbuff's tail of the first fragment is expanded to have enough room after the data pointer for at least total_size. This means that it gets expanded by total_size - first_skb->len. But this is ignoring the fact that after expanding the buffer, the fragment header is pulled by from this buffer. Assuming that the tailroom of the buffer was already 0, the buffer after the data pointer of the skbuff is now only total_size - len(fragment_header) large. When the merge function is then processing the remaining fragments, the code to copy the data over to the merged skbuff will cause an skb_over_panic when it tries to actually put enough data to fill the total_size bytes of the packet. The size of the skb_pull must therefore also be taken into account when the buffer's tailroom is expanded. Fixes: 610bfc6b ("batman-adv: Receive fragmented packets and merge") Reported-by:
Martin Weinelt <martin@darmstadt.freifunk.net> Co-authored-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Fabrizio Castro authored
BugLink: https://bugs.launchpad.net/bugs/1811077 [ Upstream commit 68c8d209 ] Assigning 2 to "renesas,can-clock-select" tricks the driver into registering the CAN interface, even though we don't want that. This patch improves one of the checks to prevent that from happening. Fixes: 862e2b6a ("can: rcar_can: support all input clocks") Signed-off-by:
Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by:
Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1811077 [ Upstream commit e5b78f2e ] If iommu_ops.add_device() fails, iommu_ops.domain_free() is still called, leading to a crash, as the domain was only partially initialized: ipmmu-vmsa e67b0000.mmu: Cannot accommodate DMA translation for IOMMU page tables sata_rcar ee300000.sata: Unable to initialize IPMMU context iommu: Failed to add device ee300000.sata to group 0: -22 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038 ... Call trace: ipmmu_domain_free+0x1c/0xa0 iommu_group_release+0x48/0x68 kobject_put+0x74/0xe8 kobject_del.part.0+0x3c/0x50 kobject_put+0x60/0xe8 iommu_group_get_for_dev+0xa8/0x1f0 ipmmu_add_device+0x1c/0x40 of_iommu_configure+0x118/0x190 Fix this by checking if the domain's context already exists, before trying to destroy it. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Robin Murphy <robin.murphy@arm.com> Fixes: d25a2a16 ('iommu: Add driver for Renesas VMSA-compatible IPMMU') Signed-off-by:
-
Lu Baolu authored
BugLink: https://bugs.launchpad.net/bugs/1811077 [ Upstream commit 19ed3e2d ] When handling page request without pasid event, go to "no_pasid" branch instead of "bad_req". Otherwise, a NULL pointer deference will happen there. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Fixes: a222a7f0 'iommu/vt-d: Implement page request handling' Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 7661ca09 upstream. gcc-8 points out two comparisons that are clearly bogus and almost certainly not what the author intended to write: drivers/usb/gadget/udc/dummy_hcd.c: In function 'set_link_state_by_speed': drivers/usb/gadget/udc/dummy_hcd.c:379:31: error: bitwise comparison always evaluates to false [-Werror=tautological-compare] USB_PORT_STAT_ENABLE) == 1 && ^~ drivers/usb/gadget/udc/dummy_hcd.c:381:25: error: bitwise comparison always evaluates to false [-Werror=tautological-compare] USB_SS_PORT_LS_U0) == 1 && ^~ I looked at the code for a bit and came up with a change that makes it look like what the author probably meant here. This makes it look reasonable to me and to gcc, shutting up the warning. It does of course change behavior as the two conditions are actually evaluated rather than being hardcoded to false, and I have made no attempt at verifying that the changed logic makes sense in the context of a USB HCD, so that part needs to be reviewed carefully. Fixes: 1cd8fd28 ("usb: gadget: dummy_hcd: add SuperSpeed support") Cc: Tatyana Brokhman <tlinder@codeaurora.org> Cc: Felipe Balbi <balbi@kernel.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Pavel Tikhomirov authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 6ff38bd4 upstream. If all pages are deleted from the mapping by memory reclaim and also moved to the cleancache: __delete_from_page_cache (no shadow case) unaccount_page_cache_page cleancache_put_page page_cache_delete mapping->nrpages -= nr (nrpages becomes 0) We don't clean the cleancache for an inode after final file truncation (removal). truncate_inode_pages_final check (nrpages || nrexceptional) is false no truncate_inode_pages no cleancache_invalidate_inode(mapping) These way when reading the new file created with same inode we may get these trash leftover pages from cleancache and see wrong data instead of the contents of the new file. Fix it by always doing truncate_inode_pages which is already ready for nrpages == 0 && nrexceptional == 0 case and just invalidates inode. [akpm@linux-foundation.org: add comment, per Jan] Link: http://lkml.kernel.org/r/20181112095734.17979-1-ptikhomirov@virtuozzo.com Fixes: commit 91b0abe3 ("mm + fs: store shadow entries in page cache") Signed-off-by:
Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Reviewed-by:
Vasily Averin <vvs@virtuozzo.com> Reviewed-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Alexey Brodkin authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 6b04114f upstream. By default NFSv3 doesn't support ACL (Access Control Lists) which might be quite convenient to have so that mounted NFS behaves exactly as any other local file-system. In particular missing support of ACL makes umask useless. This among other thigs fixes Glibc's "nptl/tst-umask1". Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: Cupertino Miranda <cmiranda@synopsys.com> Cc: stable@vger.kernel.org #4.14+ Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Kevin Hilman authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit b7cc40c3 upstream. Change the default defconfig (used with 'make defconfig') to the ARCv2 nsim_hs_defconfig, and also switch the default Kconfig ISA selection to ARCv2. This allows several default defconfigs (e.g. make defconfig, make allnoconfig, make tinyconfig) to all work with ARCv2 by default. Note since we change default architecture from ARCompact to ARCv2 it's required to explicitly mention architecture type in ARCompact defconfigs otherwise ARCv2 will be implied and binaries will be generated for ARCv2. Cc: <stable@vger.kernel.org> # 4.4.x Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Filipe Manana authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 9084cb6a upstream. We were iterating a block group's free space cache rbtree without locking first the lock that protects it (the free_space_ctl->free_space_offset rbtree is protected by the free_space_ctl->tree_lock spinlock). KASAN reported an use-after-free problem when iterating such a rbtree due to a concurrent rbtree delete: [ 9520.359168] ================================================================== [ 9520.359656] BUG: KASAN: use-after-free in rb_next+0x13/0x90 [ 9520.359949] Read of size 8 at addr ffff8800b7ada500 by task btrfs-transacti/1721 [ 9520.360357] [ 9520.360530] CPU: 4 PID: 1721 Comm: btrfs-transacti Tainted: G L 4.19.0-rc8-nbor #555 [ 9520.360990] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 9520.362682] Call Trace: [ 9520.362887] dump_stack+0xa4/0xf5 [ 9520.363146] print_address_description+0x78/0x280 [ 9520.363412] kasan_report+0x263/0x390 [ 9520.363650] ? rb_next+0x13/0x90 [ 9520.363873] __asan_load8+0x54/0x90 [ 9520.364102] rb_next+0x13/0x90 [ 9520.364380] btrfs_dump_free_space+0x146/0x160 [btrfs] [ 9520.364697] dump_space_info+0x2cd/0x310 [btrfs] [ 9520.364997] btrfs_reserve_extent+0x1ee/0x1f0 [btrfs] [ 9520.365310] __btrfs_prealloc_file_range+0x1cc/0x620 [btrfs] [ 9520.365646] ? btrfs_update_time+0x180/0x180 [btrfs] [ 9520.365923] ? _raw_spin_unlock+0x27/0x40 [ 9520.366204] ? btrfs_alloc_data_chunk_ondemand+0x2c0/0x5c0 [btrfs] [ 9520.366549] btrfs_prealloc_file_range_trans+0x23/0x30 [btrfs] [ 9520.366880] cache_save_setup+0x42e/0x580 [btrfs] [ 9520.367220] ? btrfs_check_data_free_space+0xd0/0xd0 [btrfs] [ 9520.367518] ? lock_downgrade+0x2f0/0x2f0 [ 9520.367799] ? btrfs_write_dirty_block_groups+0x11f/0x6e0 [btrfs] [ 9520.368104] ? kasan_check_read+0x11/0x20 [ 9520.368349] ? do_raw_spin_unlock+0xa8/0x140 [ 9520.368638] btrfs_write_dirty_block_groups+0x2af/0x6e0 [btrfs] [ 9520.368978] ? btrfs_start_dirty_block_groups+0x870/0x870 [btrfs] [ 9520.369282] ? do_raw_spin_unlock+0xa8/0x140 [ 9520.369534] ? _raw_spin_unlock+0x27/0x40 [ 9520.369811] ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs] [ 9520.370137] commit_cowonly_roots+0x4b9/0x610 [btrfs] [ 9520.370560] ? commit_fs_roots+0x350/0x350 [btrfs] [ 9520.370926] ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs] [ 9520.371285] btrfs_commit_transaction+0x5e5/0x10e0 [btrfs] [ 9520.371612] ? btrfs_apply_pending_changes+0x90/0x90 [btrfs] [ 9520.371943] ? start_transaction+0x168/0x6c0 [btrfs] [ 9520.372257] transaction_kthread+0x21c/0x240 [btrfs] [ 9520.372537] kthread+0x1d2/0x1f0 [ 9520.372793] ? btrfs_cleanup_transaction+0xb50/0xb50 [btrfs] [ 9520.373090] ? kthread_park+0xb0/0xb0 [ 9520.373329] ret_from_fork+0x3a/0x50 [ 9520.373567] [ 9520.373738] Allocated by task 1804: [ 9520.373974] kasan_kmalloc+0xff/0x180 [ 9520.374208] kasan_slab_alloc+0x11/0x20 [ 9520.374447] kmem_cache_alloc+0xfc/0x2d0 [ 9520.374731] __btrfs_add_free_space+0x40/0x580 [btrfs] [ 9520.375044] unpin_extent_range+0x4f7/0x7a0 [btrfs] [ 9520.375383] btrfs_finish_extent_commit+0x15f/0x4d0 [btrfs] [ 9520.375707] btrfs_commit_transaction+0xb06/0x10e0 [btrfs] [ 9520.376027] btrfs_alloc_data_chunk_ondemand+0x237/0x5c0 [btrfs] [ 9520.376365] btrfs_check_data_free_space+0x81/0xd0 [btrfs] [ 9520.376689] btrfs_delalloc_reserve_space+0x25/0x80 [btrfs] [ 9520.377018] btrfs_direct_IO+0x42e/0x6d0 [btrfs] [ 9520.377284] generic_file_direct_write+0x11e/0x220 [ 9520.377587] btrfs_file_write_iter+0x472/0xac0 [btrfs] [ 9520.377875] aio_write+0x25c/0x360 [ 9520.378106] io_submit_one+0xaa0/0xdc0 [ 9520.378343] __se_sys_io_submit+0xfa/0x2f0 [ 9520.378589] __x64_sys_io_submit+0x43/0x50 [ 9520.378840] do_syscall_64+0x7d/0x240 [ 9520.379081] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 9520.379387] [ 9520.379557] Freed by task 1802: [ 9520.379782] __kasan_slab_free+0x173/0x260 [ 9520.380028] kasan_slab_free+0xe/0x10 [ 9520.380262] kmem_cache_free+0xc1/0x2c0 [ 9520.380544] btrfs_find_space_for_alloc+0x4cd/0x4e0 [btrfs] [ 9520.380866] find_free_extent+0xa99/0x17e0 [btrfs] [ 9520.381166] btrfs_reserve_extent+0xd5/0x1f0 [btrfs] [ 9520.381474] btrfs_get_blocks_direct+0x60b/0xbd0 [btrfs] [ 9520.381761] __blockdev_direct_IO+0x10ee/0x58a1 [ 9520.382059] btrfs_direct_IO+0x25a/0x6d0 [btrfs] [ 9520.382321] generic_file_direct_write+0x11e/0x220 [ 9520.382623] btrfs_file_write_iter+0x472/0xac0 [btrfs] [ 9520.382904] aio_write+0x25c/0x360 [ 9520.383172] io_submit_one+0xaa0/0xdc0 [ 9520.383416] __se_sys_io_submit+0xfa/0x2f0 [ 9520.383678] __x64_sys_io_submit+0x43/0x50 [ 9520.383927] do_syscall_64+0x7d/0x240 [ 9520.384165] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 9520.384439] [ 9520.384610] The buggy address belongs to the object at ffff8800b7ada500 which belongs to the cache btrfs_free_space of size 72 [ 9520.385175] The buggy address is located 0 bytes inside of 72-byte region [ffff8800b7ada500, ffff8800b7ada548) [ 9520.385691] The buggy address belongs to the page: [ 9520.385957] page:ffffea0002deb680 count:1 mapcount:0 mapping:ffff880108a1d700 index:0x0 compound_mapcount: 0 [ 9520.388030] flags: 0x8100(slab|head) [ 9520.388281] raw: 0000000000008100 ffffea0002deb608 ffffea0002728808 ffff880108a1d700 [ 9520.388722] raw: 0000000000000000 0000000000130013 00000001ffffffff 0000000000000000 [ 9520.389169] page dumped because: kasan: bad access detected [ 9520.389473] [ 9520.389658] Memory state around the buggy address: [ 9520.389943] ffff8800b7ada400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 9520.390368] ffff8800b7ada480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 9520.390796] >ffff8800b7ada500: fb fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc [ 9520.391223] ^ [ 9520.391461] ffff8800b7ada580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 9520.391885] ffff8800b7ada600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 9520.392313] ================================================================== [ 9520.392772] BTRFS critical (device vdc): entry offset 2258497536, bytes 131072, bitmap no [ 9520.393247] BUG: unable to handle kernel NULL pointer dereference at 0000000000000011 [ 9520.393705] PGD 800000010dbab067 P4D 800000010dbab067 PUD 107551067 PMD 0 [ 9520.394059] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 9520.394378] CPU: 4 PID: 1721 Comm: btrfs-transacti Tainted: G B L 4.19.0-rc8-nbor #555 [ 9520.394858] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 9520.395350] RIP: 0010:rb_next+0x3c/0x90 [ 9520.396461] RSP: 0018:ffff8801074ff780 EFLAGS: 00010292 [ 9520.396762] RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff81b5ac4c [ 9520.397115] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000011 [ 9520.397468] RBP: ffff8801074ff7a0 R08: ffffed0021d64ccc R09: ffffed0021d64ccc [ 9520.397821] R10: 0000000000000001 R11: ffffed0021d64ccb R12: ffff8800b91e0000 [ 9520.398188] R13: ffff8800a3ceba48 R14: ffff8800b627bf80 R15: 0000000000020000 [ 9520.398555] FS: 0000000000000000(0000) GS:ffff88010eb00000(0000) knlGS:0000000000000000 [ 9520.399007] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9520.399335] CR2: 0000000000000011 CR3: 0000000106b52000 CR4: 00000000000006a0 [ 9520.399679] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 9520.400023] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 9520.400400] Call Trace: [ 9520.400648] btrfs_dump_free_space+0x146/0x160 [btrfs] [ 9520.400974] dump_space_info+0x2cd/0x310 [btrfs] [ 9520.401287] btrfs_reserve_extent+0x1ee/0x1f0 [btrfs] [ 9520.401609] __btrfs_prealloc_file_range+0x1cc/0x620 [btrfs] [ 9520.401952] ? btrfs_update_time+0x180/0x180 [btrfs] [ 9520.402232] ? _raw_spin_unlock+0x27/0x40 [ 9520.402522] ? btrfs_alloc_data_chunk_ondemand+0x2c0/0x5c0 [btrfs] [ 9520.402882] btrfs_prealloc_file_range_trans+0x23/0x30 [btrfs] [ 9520.403261] cache_save_setup+0x42e/0x580 [btrfs] [ 9520.403570] ? btrfs_check_data_free_space+0xd0/0xd0 [btrfs] [ 9520.403871] ? lock_downgrade+0x2f0/0x2f0 [ 9520.404161] ? btrfs_write_dirty_block_groups+0x11f/0x6e0 [btrfs] [ 9520.404481] ? kasan_check_read+0x11/0x20 [ 9520.404732] ? do_raw_spin_unlock+0xa8/0x140 [ 9520.405026] btrfs_write_dirty_block_groups+0x2af/0x6e0 [btrfs] [ 9520.405375] ? btrfs_start_dirty_block_groups+0x870/0x870 [btrfs] [ 9520.405694] ? do_raw_spin_unlock+0xa8/0x140 [ 9520.405958] ? _raw_spin_unlock+0x27/0x40 [ 9520.406243] ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs] [ 9520.406574] commit_cowonly_roots+0x4b9/0x610 [btrfs] [ 9520.406899] ? commit_fs_roots+0x350/0x350 [btrfs] [ 9520.407253] ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs] [ 9520.407589] btrfs_commit_transaction+0x5e5/0x10e0 [btrfs] [ 9520.407925] ? btrfs_apply_pending_changes+0x90/0x90 [btrfs] [ 9520.408262] ? start_transaction+0x168/0x6c0 [btrfs] [ 9520.408582] transaction_kthread+0x21c/0x240 [btrfs] [ 9520.408870] kthread+0x1d2/0x1f0 [ 9520.409138] ? btrfs_cleanup_transaction+0xb50/0xb50 [btrfs] [ 9520.409440] ? kthread_park+0xb0/0xb0 [ 9520.409682] ret_from_fork+0x3a/0x50 [ 9520.410508] Dumping ftrace buffer: [ 9520.410764] (ftrace buffer empty) [ 9520.411007] CR2: 0000000000000011 [ 9520.411297] ---[ end trace 01a0863445cf360a ]--- [ 9520.411568] RIP: 0010:rb_next+0x3c/0x90 [ 9520.412644] RSP: 0018:ffff8801074ff780 EFLAGS: 00010292 [ 9520.412932] RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff81b5ac4c [ 9520.413274] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000011 [ 9520.413616] RBP: ffff8801074ff7a0 R08: ffffed0021d64ccc R09: ffffed0021d64ccc [ 9520.414007] R10: 0000000000000001 R11: ffffed0021d64ccb R12: ffff8800b91e0000 [ 9520.414349] R13: ffff8800a3ceba48 R14: ffff8800b627bf80 R15: 0000000000020000 [ 9520.416074] FS: 0000000000000000(0000) GS:ffff88010eb00000(0000) knlGS:0000000000000000 [ 9520.416536] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9520.416848] CR2: 0000000000000011 CR3: 0000000106b52000 CR4: 00000000000006a0 [ 9520.418477] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 9520.418846] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 9520.419204] Kernel panic - not syncing: Fatal exception [ 9520.419666] Dumping ftrace buffer: [ 9520.419930] (ftrace buffer empty) [ 9520.420168] Kernel Offset: disabled [ 9520.420406] ---[ end Kernel panic - not syncing: Fatal exception ]--- Fix this by acquiring the respective lock before iterating the rbtree. Reported-by:
Nikolay Borisov <nborisov@suse.com> CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Cc: Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
Nikolay Borisov authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit f8397d69 upstream. When a metadata read is served the endio routine btree_readpage_end_io_hook is called which eventually runs the tree-checker. If tree-checker fails to validate the read eb then it sets EXTENT_BUFFER_CORRUPT flag. This leads to btree_read_extent_buffer_pages wrongly assuming that all available copies of this extent buffer are wrong and failing prematurely. Fix this modify btree_read_extent_buffer_pages to read all copies of the data. This failure was exhibitted in xfstests btrfs/124 which would spuriously fail its balance operations. The reason was that when balance was run following re-introduction of the missing raid1 disk __btrfs_map_block would map the read request to stripe 0, which corresponded to devid 2 (the disk which is being removed in the test): item 2 key (FIRST_CHUNK_TREE CHUNK_ITEM 3553624064) itemoff 15975 itemsize 112 length 1073741824 owner 2 stripe_len 65536 type DATA|RAID1 io_align 65536 io_width 65536 sector_size 4096 num_stripes 2 sub_stripes 1 stripe 0 devid 2 offset 2156920832 dev_uuid 8466c350-ed0c-4c3b-b17d-6379b445d5c8 stripe 1 devid 1 offset 3553624064 dev_uuid 1265d8db-5596-477e-af03-df08eb38d2ca This caused read requests for a checksum item that to be routed to the stale disk which triggered the aforementioned logic involving EXTENT_BUFFER_CORRUPT flag. This then triggered cascading failures of the balance operation. Fixes: a826d6dc ("Btrfs: check items for correctness as we search") CC: stable@vger.kernel.org # 4.4+ Suggested-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
Adam Wong authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit bf87ade0 upstream. Added the ability to detect the ELAN0621 touchpad found in some Lenovo laptops. Signed-off-by:
Adam Wong <adam@adamwong.me> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Noah Westervelt authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit ad33429c upstream. Add ELAN061E to the ACPI table to support Elan touchpad found in Lenovo IdeaPad 330-15ARR. Signed-off-by:
Noah Westervelt <nwestervelt@outlook.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Patrick Gaskin authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 3ed64da3 upstream. Add ELAN0620 to the ACPI table to support the elan touchpad in the Lenovo IdeaPad 130-15IKB. Signed-off-by:
Patrick Gaskin <patrick@pgaskin.net> Cc: stable@vger.kernel.org Signed-off-by:
-
Christian Hoff authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit d55bda1b upstream. "of_get_named_gpio()" returns a negative error value if it fails and drivers should check for this. This missing check was now added to the matrix_keypad driver. In my case "of_get_named_gpio()" returned -EPROBE_DEFER because the referenced GPIOs belong to an I/O expander, which was not yet probed at the point in time when the matrix_keypad driver was loading. Because the driver did not check for errors from the "of_get_named_gpio()" routine, it was assuming that "-EPROBE_DEFER" is actually a GPIO number and continued as usual, which led to further errors like this later on: WARNING: CPU: 3 PID: 167 at drivers/gpio/gpiolib.c:114 gpio_to_desc+0xc8/0xd0 invalid GPIO -517 Note that the "GPIO number" -517 in the error message above is actually "-EPROBE_DEFER". As part of the patch a misleading error message "no platform data defined" was also removed. This does not lead to information loss because the other error paths in matrix_keypad_parse_dt() already print an error. Signed-off-by:
Christian Hoff <christian_hoff@gmx.net> Suggested-by:
Sebastian Reichel <sre@kernel.org> Reviewed-by:
-
Cameron Gutman authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit a6754fae upstream. Since we continue to find tons of new variants [0,1,2,3,4,5,6] that need the PDP quirk, let's just quirk all devices from PDP. [0]: https://github.com/paroj/xpad/pull/104 [1]: https://github.com/paroj/xpad/pull/105 [2]: https://github.com/paroj/xpad/pull/108 [3]: https://github.com/paroj/xpad/pull/109 [4]: https://github.com/paroj/xpad/pull/112 [5]: https://github.com/paroj/xpad/pull/115 [6]: https://github.com/paroj/xpad/pull/116 Fixes: e5c9c6a8 ("Input: xpad - add support for PDP Xbox One controllers") Cc: stable@vger.kernel.org Signed-off-by:
Cameron Gutman <aicommander@gmail.com> Signed-off-by:
-
Wei Yongjun authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 2d88a331 upstream. In case of error, the function gpio_to_desc() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Milo Kim authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit d1aa577f upstream. Workqueue, 'set_brightness_work' is used for scheduling brightness control. This workqueue is canceled when the LED class device is unregistered. Currently, LED subsystem handles like below. cancel_work_sync(&led_cdev->set_brightness_work) led_set_brightness(led_cdev, LED_OFF) However, this could be a problem. Workqueue is going to be canceled but LED device needs to be off. The worst case is null pointer access due to scheduling a workqueue. LED module is loaded. LED driver private data is allocated by using devm_zalloc(). LED module is unloaded. led_classdev_unregister() is called. cancel_work_sync() led_set_brightness(led_cdev, LED_OFF) schedule_work() if LED driver uses brightness_set_blocking() In the meantime, driver private data will be freed. ..scheduling.. brightness_set_blocking() callback is invoked. For the brightness control, LED driver tries to access private data but resource is removed! To avoid this problem, LED subsystem should turn off the brightness first and wait for completion. led_set_brightness(led_cdev, LED_OFF) flush_work(&led_cdev->set_brightness_work) It guarantees that LED driver turns off the brightness prior to resource management. Cc: linux-leds@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Milo Kim <milo.kim@ti.com> Signed-off-by:
-
Markus Hofstaetter authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit f1670336 upstream. Some PWMs are disabled by default or the default pin setting does not match the LED_OFF state (e.g., active-low leds). Hence, the driver may end up reporting 0 brightness, but the leds are actually on using full brightness, because it never enforces its default configuration. So enforce it by calling led_pwm_set() after successfully registering the device. Tested on a Phytec phyFLEX i.MX6Q board based on kernel v3.19.5. Signed-off-by:
Markus Hofstaetter <markus.hofstaetter@ait.ac.at> Tested-by:
-
Laura Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 1cd25cbb upstream. After 2dd45316 ("kgdboc: Fix restrict error"), kgdboc_option_setup is now only used when built in, resulting in a warning when compiled as a module: drivers/tty/serial/kgdboc.c:134:12: warning: 'kgdboc_option_setup' defined but not used [-Wunused-function] static int kgdboc_option_setup(char *opt) ^~~~~~~~~~~~~~~~~~~ Move the function under the appropriate ifdef for builtin only. Fixes: 2dd45316 ("kgdboc: Fix restrict error") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
-
