- 16 Jun, 2017 12 commits
-
-
Chris Wilson authored
When choosing a slot for an execbuffer, we ideally want to use the same address as last time (so that we don't have to rebind it) and the same address as expected by the user (so that we don't have to fixup any relocations pointing to it). If we first try to bind the incoming execbuffer->offset from the user, or the currently bound offset that should hopefully achieve the goal of avoiding the rebind cost and the relocation penalty. However, if the object is not currently bound there we don't want to arbitrarily unbind an object in our chosen position and so choose to rebind/relocate the incoming object instead. After we report the new position back to the user, on the next pass the relocations should have settled down. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Joonas Lahtinen <joonas.lahtien@linux.intel.com>
-
Chris Wilson authored
If we take a reference to the object/vma when it is first used in an execbuf, we can keep that reference until the object's file-local handle is closed. Thereby saving a frequent ref/unref pair. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
The major scaling bottleneck in execbuffer is the processing of the execobjects. Creating an auxiliary list is inefficient when compared to using the execobject array we already have allocated. Reservation is then split into phases. As we lookup up the VMA, we try and bind it back into active location. Only if that fails, do we add it to the unbound list for phase 2. In phase 2, we try and add all those objects that could not fit into their previous location, with fallback to retrying all objects and evicting the VM in case of severe fragmentation. (This is the same as before, except that phase 1 is now done inline with looking up the VMA to avoid an iteration over the execobject array. In the ideal case, we eliminate the separate reservation phase). During the reservation phase, we only evict from the VM between passes (rather than currently as we try to fit every new VMA). In testing with Unreal Engine's Atlantis demo which stresses the eviction logic on gen7 class hardware, this speed up the framerate by a factor of 2. The second loop amalgamation is between move_to_gpu and move_to_active. As we always submit the request, even if incomplete, we can use the current request to track active VMA as we perform the flushes and synchronisation required. The next big advancement is to avoid copying back to the user any execobjects and relocations that are not changed. v2: Add a Theory of Operation spiel. v3: Fall back to slow relocations in preparation for flushing userptrs. v4: Document struct members, factor out eb_validate_vma(), add a few more comments to explain some magic and hide other magic behind macros. Signed-off-by:
-
Chris Wilson authored
If we write a relocation into the buffer, we require our own implicit synchronisation added after the start of the execbuf, outside of the user's control. As we may end up clflushing, or doing the patch itself on the GPU, asynchronously we need to look at the implicit serialisation on obj->resv and hence need to disable EXEC_OBJECT_ASYNC for this object. If the user does trigger a stall for relocations, we make sure the stall is complete enough so that the batch is not submitted before we complete those relocations. Fixes: 77ae9957 ("drm/i915: Enable userspace to opt-out of implicit fencing") Signed-off-by:
-
Chris Wilson authored
We can simplify our tracking of pending writes in an execbuf to the single bit in the vma->exec_entry->flags, but that requires the relocation function knowing the object's vma. Pass it along. Note we have only been using a single bit to track flushing since commit cc889e0f Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Jun 13 20:45:19 2012 +0200 drm/i915: disable flushing_list/gpu_write_list unconditionally flushed all render caches before the breadcrumb and commit 6ac42f41 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Jul 21 12:25:01 2012 +0200 drm/i915: Replace the complex flushing logic with simple invalidate/flush all did away with the explicit GPU domain tracking. This was then codified into the ABI with NO_RELOC in commit ed5982e6 Author: Daniel Vetter <daniel.vetter@ffwll.ch> # Oi! Patch stealer! Date: Thu Jan 17 22:23:36 2013 +0100 drm/i915: Allow userspace to hint that the relocations were known Signed-off-by:
-
Chris Wilson authored
The advent of full-ppgtt lead to an extra indirection between the object and its binding. That extra indirection has a noticeable impact on how fast we can convert from the user handles to our internal vma for execbuffer. In order to bypass the extra indirection, we use a resizable hashtable to jump from the object to the per-ctx vma. rhashtable was considered but we don't need the online resizing feature and the extra complexity proved to undermine its usefulness. Instead, we simply reallocate the hastable on demand in a background task and serialize it before iterating. In non-full-ppgtt modes, multiple files and multiple contexts can share the same vma. This leads to having multiple possible handle->vma links, so we only use the first to establish the fast path. The majority of buffers are not shared and so we should still be able to realise speedups with multiple clients. v2: Prettier names, more magic. v3: Many style tweaks, most notably hiding the misuse of execobj[].rsvd2 Signed-off-by:
-
Chris Wilson authored
The default context is always supported (as it contains the global hangcheck stats) and the contexts for hangcheck are not limited to any ring. This was dropped in 2013 because it was supposed to have been included with Ben's full-ppgtt patch set. It never landed and the bug remains. References: https://bugs.freedesktop.org/show_bug.cgi?id=65845 Link: http://patchwork.freedesktop.org/patch/msgid/1372175222-27622-1-git-send-email-mika.kuoppala@intel.comSigned-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170616132849.29597-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
For ease of use (i.e. avoiding a few checks and function calls), store the object's cache coherency next to the cache is dirty bit. Specifically this patch aims to reduce the frequency of no-op calls to i915_gem_object_clflush() to counter-act the increase of such calls for GPU only objects in the previous patch. v2: Replace cache_dirty & ~cache_coherent with cache_dirty && !cache_coherent as gcc generates much better code for the latter (Tvrtko) Signed-off-by:
Dongwon Kim <dongwon.kim@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170616105455.16977-1-chris@chris-wilson.co.ukReviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
Chris Wilson authored
Currently, we only mark the CPU cache as dirty if we skip a clflush. This leads to some confusion where we have to ask if the object is in the write domain or missed a clflush. If we always mark the cache as dirty, this becomes a much simply question to answer. The goal remains to do as few clflushes as required and to do them as late as possible, in the hope of deferring the work to a kthread and not block the caller (e.g. execbuf, flips). v2: Always call clflush before GPU execution when the cache_dirty flag is set. This may cause some extra work on llc systems that migrate dirty buffers back and forth - but we do try to limit that by only setting cache_dirty at the end of the gpu sequence. v3: Always mark the cache as dirty upon a level change, as we need to invalidate any stale cachelines due to external writes. Reported-by:
-
Chris Wilson authored
i915_vma_destroy() is now not used outside of i915_vma.c so we can remove the export and make the function static. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
-
Ville Syrjälä authored
Attach the tv_format property to the SDVO connector instead of passing a '0' in place of the pointer to the property. This got broken when the SDVO connector properties were converted to atomic. We can thank sparse for catching this: drivers/gpu/drm/i915/intel_sdvo.c:2742:75: warning: Using plain integer as NULL pointer Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Fixes: 630d30a4 ("drm/i915: Convert intel_sdvo connector properties to atomic.") Link: http://patchwork.freedesktop.org/patch/msgid/20170615172308.10121-1-ville.syrjala@linux.intel.comReviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com>
-
https://github.com/01org/gvt-linuxJani Nikula authored
gvt-next-2017-06-08 First gvt-next pull for 4.13: - optimization for per-VM mmio save/restore (Changbin) - optimization for mmio hash table (Changbin) - scheduler optimization with event (Ping) - vGPU reset refinement (Fred) - other misc refactor and cleanups, etc. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170608093547.bjgs436e3iokrzdm@zhen-hp.sh.intel.com
-
- 15 Jun, 2017 15 commits
-
-
Rodrigo Vivi authored
This reverts commit bb9d85f6. New ddb allocation algorithm is a show stopper on my SKL system. Besides not be able to get external DP 4k@60 (through USB type C), It fully hang my screen when unplugging the USB type C. Bugzilla: https://patchwork.freedesktop.org/patch/161571/ Fixes: bb9d85f6 ("drm/i915/skl: New ddb allocation algorithm") Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1497376350-3400-1-git-send-email-rodrigo.vivi@intel.com
-
Madhav Chauhan authored
As per BSEPC, if device ready bit is '0' in enable IO sequence then its a cold boot/reset scenario eg: S3/S4 resume. If cold boot scenario detected in enable IO, then prepare port immediately. In normal boot scenario, prepare port after glk_dsi_device_ready(). Without cold boot sequence enabled, features like S3/S4 doesn't work. Signed-off-by:
Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by:
-
Madhav Chauhan authored
This patch divides glk_dsi_device_ready() function into two part. First part will program LP wake and MIPI DSI mode to MIPI_CTRL reg using newly defined function glk_dsi_enable_io(). glk_dsi_enable_io() will be called from intel_dsi_pre_enable. Second part will do remaining device ready activities using the existing function glk_dsi_device_ready(). Signed-off-by:
-
Dhinakaran Pandiyan authored
Maarten and Ville noticed that we are enabling backlight via DP aux very early in the modeset_init path via the intel_dp_aux_setup_backlight() function, since commit e7156c83 ("drm/i915: Add Backlight Control using DPCD for eDP connectors (v9)"). Looks like all we need to do during _setup_backlight() is read the current brightness state instead of modifying it. v2: Rewrote commit message. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Yetunde Adebisi <yetundex.adebisi@intel.com> Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by:
Puthikorn Voravootivat <puthik@chromium.org> Fixes: e7156c83 ("drm/i915: Add Backlight Control using DPCD for eDP connectors (v9)") Link: http://patchwork.freedesktop.org/patch/msgid/1497384239-2965-1-git-send-email-dhinakaran.pandiyan@intel.comSigned-off-by:
-
Colin Ian King authored
The function cnl_ddi_dp_set_dpll_hw_state does not need to be in global scope, so make it static. Cleans up sparse warning: "symbol 'cnl_ddi_dp_set_dpll_hw_state' was not declared. Should it be static?" Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170613134751.29196-1-colin.king@canonical.comReviewed-by:
-
Ville Syrjälä authored
With 830 the only thing needing pipe quirks, we can just drop the quirk defines and replace the checks with IS_I830() checks. Signed-off-by:
-
Ville Syrjälä authored
The pipe A force quirk shouldn't needed except on 830. So let's nuke it for the IBM Thinkpad T60 945 machines. This quirk pre-dates KMS so it's usefulness is doubtful at best now. The original bug report [1] describes the symptoms as "system hang on closing T60 panel lid", and we already dropped a similar quirk for another 945 machine in commit 736a69ca ("drm/i915: Drop PIPE-A quirk for 945GSE HP Mini") so I'm hopeful we can drop this one as well. The quirk was added into xf86-video-intel in commit 08903abe4dc0 ("Add pipe a force enable quirk for Lenovo T60") [1] https://bugs.freedesktop.org/show_bug.cgi?id=16494Signed-off-by:
-
Ville Syrjälä authored
The pipe A force quirk shouldn't needed except on 830. So let's nuke it for the Toshiba Protege R-205/S-209 945 machines. This quirk pre-dates KMS so it's usefulness is doubtful at best now. Unfortunately the original bug report [1] isn't very helpful since it doesn't describe the symptoms. And the commit message in xf86-video-intel commit ecdb5963ef68 ("Add pipe A force enable quirk for Toshiba Portege R205-S209") is not much help either. However, if we assume the problem was the typical "closing the lid hangs the box" type of thing, we already nuked the quirk for another 945 machine in commit 736a69ca ("drm/i915: Drop PIPE-A quirk for 945GSE HP Mini") and so I hope we can drop this one as well. [1] https://bugs.freedesktop.org/show_bug.cgi?id=14944Signed-off-by: -
Ville Syrjälä authored
830 more or less requires both pipes and DPLLs to remain on as long as either pipe is needed. However, when neither pipe is actually needed, we can save a bit of power by turning everything off. To do that we add a new "power well" that turns both pipes and DPLLs on and off in the right order. Seems to save ~50mW on my Fujitsu-Siemens Lifebook S6010. This also avoids having to abuse the load detection to force pipe A on at init time. That was never very robust, and it only worked for one pipe, whereas 830 really needs both pipes enabled. As a bonus the 830 pipe quirk is now a bit more isolated from the rest of the mode setting infrastructure, which should mean that it's much less likely someone will accidentally break it in the future. The extra cost is of course slight code duplication, but that seems like a worthwile tradeoff here. v2; s/BIT/BIT_ULL/ Signed-off-by:
-
Ville Syrjälä authored
The magic "enable the DPLL three times" sequence feels like it deserves a loop. Signed-off-by:
-
Ville Syrjälä authored
If intel_crtc_disable_noatomic() were to ever get called during resume we'd end up deadlocking since resume has its own acqcuire_ctx but intel_crtc_disable_noatomic() still tries to use the mode_config.acquire_ctx. Pass down the correct acquire ctx from the top. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: e2c8b870 ("drm/i915: Use atomic helpers for suspend, v2.") Signed-off-by:
-
Ville Syrjälä authored
Pass down the correct acquire context to the pipe A quirk load detect hack during display resume. Avoids deadlocking the entire thing. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: e2c8b870 ("drm/i915: Use atomic helpers for suspend, v2.") Signed-off-by:
-
Chris Wilson authored
Currently the vma has one link member that is used for both holding its place in the execbuf reservation list, and in any eviction list. This dual property is quite tricky and error prone. Signed-off-by:
-
Chris Wilson authored
This has the benefit of not requiring us to manipulate the vma->exec_link list when tearing down the execbuffer, and is a marginally cheaper test to detect the user error. Signed-off-by:
-
Chris Wilson authored
Combine the two slightly overlapping parameter structures we pass around the execbuffer routines into one. Signed-off-by:
-
- 14 Jun, 2017 13 commits
-
-
Lionel Landwerlin authored
Add OA support for Geminilake (pretty much identical to Broxton), and also add the associated OA configurations. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Link: http://patchwork.freedesktop.org/patch/msgid/20170613112309.4088-2-lionel.g.landwerlin@intel.com
-
Lionel Landwerlin authored
Add OA support for Kabylake (pretty much identical to Skylake), and also add the associated OA configurations. Signed-off-by:
-
Lionel Landwerlin authored
Add macros to detect GT2/GT3 skus so we can apply the proper OA configuration later. Signed-off-by:
-
Robert Bragg authored
In earlier iterations of the i915-perf driver we had a number of callbacks/hooks from other parts of the i915 driver to e.g. notify us when a legacy context was pinned and these could run asynchronously with respect to the stream file operations and might also run in atomic context. dev_priv->perf.hook_lock had been for serialising access to state needed within these callbacks, but as the code has evolved some of the hooks have gone away or are implemented to avoid needing to lock any state. The remaining use of this lock was actually redundant considering how the gen7 oacontrol state used to be updated as part of a context pin hook. Signed-off-by:
Robert Bragg <robert@sixbynine.org> Signed-off-by:
-
Robert Bragg authored
An oa_exponent_to_ns() utility and per-gen timebase constants where recently removed when updating the tail pointer race condition WA, and this restores those so we can update the _PROP_OA_EXPONENT validation done in read_properties_unlocked() to not assume we have a 12.5MHz timebase as we did for Haswell. Accordingly the oa_sample_rate_hard_limit value that's referenced by proc_dointvec_minmax defining the absolute limit for the OA sampling frequency is now initialized to (timestamp_frequency / 2) instead of the 6.25MHz constant for Haswell. v2: Specify frequency of 19.2MHz for BXT (Ville) Initialize oa_sample_rate_hard_limit per-gen too (Lionel) Signed-off-by: -
Robert Bragg authored
These are auto generated from an XML description of metric sets, currently maintained in gputop, ref: https://github.com/rib/gputop > gputop-data/oa-*.xml > scripts/i915-perf-kernelgen.py $ make -C gputop-data -f Makefile.xml Signed-off-by:
-
Robert Bragg authored
Enables access to OA unit metrics for BDW, CHV, SKL and BXT which all share (more-or-less) the same OA unit design. Of particular note in comparison to Haswell: some OA unit HW config state has become per-context state and as a consequence it is somewhat more complicated to manage synchronous state changes from the cpu while there's no guarantee of what context (if any) is currently actively running on the gpu. The periodic sampling frequency which can be particularly useful for system-wide analysis (as opposed to command stream synchronised MI_REPORT_PERF_COUNT commands) is perhaps the most surprising state to have become per-context save and restored (while the OABUFFER destination is still a shared, system-wide resource). This support for gen8+ takes care to consider a number of timing challenges involved in synchronously updating per-context state primarily by programming all config state from the cpu and updating all current and saved contexts synchronously while the OA unit is still disabled. The driver intentionally avoids depending on command streamer programming to update OA state considering the lack of synchronization between the automatic loading of OACTXCONTROL state (that includes the periodic sampling state and enable state) on context restore and the parsing of any general purpose BB the driver can control. I.e. this implementation is careful to avoid the possibility of a context restore temporarily enabling any out-of-date periodic sampling state. In addition to the risk of transiently-out-of-date state being loaded automatically; there are also internal HW latencies involved in the loading of MUX configurations which would be difficult to account for from the command streamer (and we only want to enable the unit when once the MUX configuration is complete). Since the Gen8+ OA unit design no longer supports clock gating the unit off for a single given context (which effectively stopped any progress of counters while any other context was running) and instead supports tagging OA reports with a context ID for filtering on the CPU, it means we can no longer hide the system-wide progress of counters from a non-privileged application only interested in metrics for its own context. Although we could theoretically try and subtract the progress of other contexts before forwarding reports via read() we aren't in a position to filter reports captured via MI_REPORT_PERF_COUNT commands. As a result, for Gen8+, we always require the dev.i915.perf_stream_paranoid to be unset for any access to OA metrics if not root. v5: Drain submitted requests when enabling metric set to ensure no lite-restore erases the context image we just updated (Lionel) v6: In addition to drain, switch to kernel context & update all context in place (Chris) v7: Add missing mutex_unlock() if switching to kernel context fails (Matthew) v8: Simplify OA period/flex-eu-counters programming by using the batchbuffer instead of modifying ctx-image (Lionel) v9: Back to updating the context image (due to erroneous testing, batchbuffer programming the OA unit doesn't actually work) (Lionel) Pin context before updating context image (Chris) Drop MMIO programming now that we switch to a kernel context with right values in initial context image (Chris) v10: Just pin_map the contexts we want to modify or let the configuration happen on first use (Chris) v11: Update kernel context OA config through the batchbuffer rather than on the fly ctx-image update (Lionel) v12: Rework OA context registers update again by swithing away from user contexts and reconfiguring the kernel context through the batchbuffer and updating all the other contexts' context image. Also take care to lock slice/subslice configuration when OA is on. (Lionel) v13: Request rpcs updates on all engine when updating the OA config (Lionel) v14: Drop any kind of rpcs management now that we monitor sseu configuration changes in a later patch (Lionel) Remove usleep after programming the NOA configs on Gen8+, this doesn't seem to be needed (Lionel) v15: Respect coding style for block comments (Chris) v16: Add missing i915_add_request() in case we fail to emit OA configuration (Matthew) Signed-off-by: -
Robert Bragg authored
Adds a static OA unit, MUX, B Counter + Flex EU configurations for basic render metrics on Broadwell, Cherryview, Skylake and Broxton. These are auto generated from an XML description of metric sets, currently maintained in gputop, ref: https://github.com/rib/gputop > gputop-data/oa-*.xml > scripts/i915-perf-kernelgen.py $ make -C gputop-data -f Makefile.xml WHITELIST=RenderBasic v2: add newlines to debug messages + fix comment (Matthew Auld) Signed-off-by:
-
Lionel Landwerlin authored
Gen8+ might have mux configurations per slices/subslices. Depending on whether slices/subslices have been fused off, only part of the configuration needs to be applied. This change reworks the mux configurations query mechanism to allow more than one set of registers to be programmed. v2: s/n_mux_regs/n_mux_configs/ (Matthew) Signed-off-by:
-
Robert Bragg authored
Assuming a uniform mask across all slices, this enables userspace to determine the specific sub slices can be enabled. This information is required, for example, to be able to analyse some OA counter reports where the counter configuration depends on the HW sub slice configuration. Signed-off-by:
-
Robert Bragg authored
Enables userspace to determine the maximum number of slices that can be enabled on the device and also know what specific slices can be enabled. This information is required, for example, to be able to analyse some OA counter reports where the counter configuration depends on the HW slice configuration. Signed-off-by:
-
Chris Wilson authored
I removed the zapping of the reservation_object->fence array of shared fences prematurely. We don't yet have the code to zap that array when retiring the object, and so currently it remains possible to continually grow the shared array trapping requests when reusing the batch_pool object across many timelines. Signed-off-by:
-
Chris Wilson authored
Having resolved whether or not we would deadlock upon a call to mutex_lock(&dev->struct_mutex), we can then spin for the contended struct_mutex if we are not the owner. We cannot afford to simply block and wait for the mutex, as the owner may itself be waiting for the allocator -- i.e. a cyclic deadlock. This should significantly improve the chance of running the shrinker for other processes whilst the GPU is busy. A more balanced approach would be to optimistically spin whilst the mutex owner was on the cpu and there was an opportunity to acquire the mutex for ourselves quickly. However, that requires support from kernel/locking/ and a new mutex_spin_trylock() primitive. Signed-off-by:
-
