Some SPI host controllers do not support full-duplex SPI transfers.

The function mcp251x_spi_trans() does a full duplex transfer. It is
used in several places in the driver, where a TX half duplex transfer
is sufficient.

To fix support for half duplex SPI host controllers, this patch
introduces a new function mcp251x_spi_write() and changes all callers
that do a TX half duplex transfer to use mcp251x_spi_write().

Fixes: e0e25001 ("can: mcp251x: add support for half duplex controllers")
Link: https://lore.kernel.org/r/20210330100246.1074375-1-mkl@pengutronix.de
Cc: Tim Harvey <tharvey@gateworks.com>
Tested-By: Tim Harvey <tharvey@gateworks.com>
Reported-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

KMSAN found uninitialized value at batadv_tt_prepare_tvlv_local_data()
[1], for commit ced72933 ("batman-adv: use CRC32C instead of CRC16
in TT code") inserted 'reserved' field into "struct batadv_tvlv_tt_data"
and commit 7ea7b4a1 ("batman-adv: make the TT CRC logic VLAN
specific") moved that field to "struct batadv_tvlv_tt_vlan_data" but left
that field uninitialized.

[1] https://syzkaller.appspot.com/bug?id=07f3e6dba96f0eb3cabab986adcd8a58b9bdbe9dReported-by: syzbot <syzbot+50ee810676e6a089487b@syzkaller.appspotmail.com>
Tested-by: syzbot <syzbot+50ee810676e6a089487b@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: ced72933 ("batman-adv: use CRC32C instead of CRC16 in TT code")
Fixes: 7ea7b4a1 ("batman-adv: make the TT CRC logic VLAN specific")
Acked-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Salil Mehta says:

====================
Misc. fixes for hns3 driver

Fixes for the miscellaneous problems found during the review of the code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Code to defer the reset(which caps the frequency of the reset) schedules the
timer and returns. Hence, following 'else-if' looks un-necessary.

Fixes: 9de0b86f ("net: hns3: Prevent to request reset frequently")
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This removes the left over check and assignment which is no longer used
anywhere in the function and should have been removed as part of the
below mentioned patch.

Fixes: 012fcb52 ("net: hns3: activate reset timer when calling reset_event")
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Found by virtue of ipv6 raw sockets not honouring the per-socket
IP{,V6}_FREEBIND setting.

Based on hits found via:
  git grep '[.]ip_nonlocal_bind'
We fix both raw ipv6 sockets to honour IP{,V6}_FREEBIND and IP{,V6}_TRANSPARENT,
and we fix sctp sockets to honour IP{,V6}_TRANSPARENT (they already honoured
FREEBIND), and not just the ipv6 'ip_nonlocal_bind' sysctl.

The helper is defined as:
  static inline bool ipv6_can_nonlocal_bind(struct net *net, struct inet_sock *inet) {
    return net->ipv6.sysctl.ip_nonlocal_bind || inet->freebind || inet->transparent;
  }
so this change only widens the accepted opt-outs and is thus a clean bugfix.

I'm not entirely sure what 'fixes' tag to add, since this is AFAICT an ancient bug,
but IMHO this should be applied to stable kernels as far back as possible.
As such I'm adding a 'fixes' tag with the commit that originally added the helper,
which happened in 4.19.  Backporting to older LTS kernels (at least 4.9 and 4.14)
would presumably require open-coding it or backporting the helper as well.

Other possibly relevant commits:
  v4.18-rc6-1502-g83ba4645 net: add helpers checking if socket can be bound to nonlocal address
  v4.18-rc6-1431-gd0c1f011 net/ipv6: allow any source address for sendmsg pktinfo with ip_nonlocal_bind
  v4.14-rc5-271-gb71d21c2 sctp: full support for ipv6 ip_nonlocal_bind & IP_FREEBIND
  v4.7-rc7-1883-g9b974202 sctp: support ipv6 nonlocal bind
  v4.1-12247-g35a256fe ipv6: Nonlocal bind

Cc: Lorenzo Colitti <lorenzo@google.com>
Fixes: 83ba4645 ("net: add helpers checking if socket can be bound to nonlocal address")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-By: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

'struct ovs_zone_limit' has more members than initialized in
ovs_ct_limit_get_default_limit().  The rest of the memory is a random
kernel stack content that ends up being sent to userspace.

Fix that by using designated initializer that will clear all
non-specified fields.

Fixes: 11efd5cb ("openvswitch: Support conntrack zone limit")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Restore CMP screener registers on resume path.

Fixes: c1e85c6c ("net: macb: save/restore the remaining registers and features")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 'unlocked_driver_cb' struct field in 'bo' is not being initialized
in tcf_block_offload_init(). The uninitialized 'unlocked_driver_cb'
will be used when calling unlocked_driver_cb(). So initialize 'bo' to
zero to avoid the issue.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 0fdcf78d ("net: use flow_indr_dev_setup_offload()")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf 2021-04-01

The following pull-request contains BPF updates for your *net* tree.

We've added 11 non-merge commits during the last 8 day(s) which contain
a total of 10 files changed, 151 insertions(+), 26 deletions(-).

The main changes are:

1) xsk creation fixes, from Ciara.

2) bpf_get_task_stack fix, from Dave.

3) trampoline in modules fix, from Jiri.

4) bpf_obj_get fix for links and progs, from Lorenz.

5) struct_ops progs must be gpl compatible fix, from Toke.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-04-01

This series contains updates to i40e driver only.

Arkadiusz fixes warnings for inconsistent indentation.

Magnus fixes an issue on xsk receive where single packets over time
are batched rather than received immediately.

Eryk corrects warnings and reporting of veb-stats.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
mptcp: mptcp: fix deadlock in mptcp{,6}_release

syzkaller has reported a few deadlock triggered by
mptcp{,6}_release.

These patches address the issue in the easy way - blocking
the relevant, multicast related, sockopt options on MPTCP
sockets.

Note that later on net-next we are going to revert patch 1/2,
as a part of a larger MPTCP sockopt implementation refactor
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This change reverts commit ad98dd37 ("mptcp: provide subflow aware
release function"). The latter introduced a deadlock spotted by
syzkaller and is not needed anymore after the previous commit.

Fixes: ad98dd37 ("mptcp: provide subflow aware release function")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unrolling mcast state at msk dismantel time is bug prone, as
syzkaller reported:

======================================================
WARNING: possible circular locking dependency detected
5.11.0-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor905/8822 is trying to acquire lock:
ffffffff8d678fe8 (rtnl_mutex){+.+.}-{3:3}, at: ipv6_sock_mc_close+0xd7/0x110 net/ipv6/mcast.c:323

but task is already holding lock:
ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1600 [inline]
ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: mptcp6_release+0x57/0x130 net/mptcp/protocol.c:3507

which lock already depends on the new lock.

Instead we can simply forbit any mcast-related setsockopt

Fixes: 717e79c8 ("mptcp: Add setsockopt()/getsockopt() socket operations")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot reported memory leak in peak_usb.
The problem was in case of failure after calling
->dev_init()[2] in peak_usb_create_dev()[1]. The data
allocated int dev_init() wasn't freed, so simple
->dev_free() call fix this problem.

backtrace:
    [<0000000079d6542a>] kmalloc include/linux/slab.h:552 [inline]
    [<0000000079d6542a>] kzalloc include/linux/slab.h:682 [inline]
    [<0000000079d6542a>] pcan_usb_fd_init+0x156/0x210 drivers/net/can/usb/peak_usb/pcan_usb_fd.c:868   [2]
    [<00000000c09f9057>] peak_usb_create_dev drivers/net/can/usb/peak_usb/pcan_usb_core.c:851 [inline] [1]
    [<00000000c09f9057>] peak_usb_probe+0x389/0x490 drivers/net/can/usb/peak_usb/pcan_usb_core.c:949

Reported-by: syzbot+91adee8d9ebb9193d22d@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Support for UDP_GRO was added in the past but the implementation for
getsockopt was missed which did lead to an error when we tried to
retrieve the setting for UDP_GRO. This patch adds the missing switch
case for UDP_GRO

Fixes: e20cf8d3 ("udp: implement GRO for plain UDP sockets.")
Signed-off-by: Norman Maurer <norman_maurer@apple.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot reported memory leak in atusb_probe()[1].
The problem was in atusb_alloc_urbs().
Since urb is anchored, we need to release the reference
to correctly free the urb

backtrace:
    [<ffffffff82ba0466>] kmalloc include/linux/slab.h:559 [inline]
    [<ffffffff82ba0466>] usb_alloc_urb+0x66/0xe0 drivers/usb/core/urb.c:74
    [<ffffffff82ad3888>] atusb_alloc_urbs drivers/net/ieee802154/atusb.c:362 [inline][2]
    [<ffffffff82ad3888>] atusb_probe+0x158/0x820 drivers/net/ieee802154/atusb.c:1038 [1]

Reported-by: syzbot+28a246747e0a465127f3@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ciara Loftus says:

====================

This series fixes some issues around socket creation for AF_XDP.

Patch 1 fixes a potential NULL pointer dereference in
xsk_socket__create_shared.

Patch 2 ensures that the umem passed to xsk_socket__create(_shared)
remains unchanged in event of failure.

Patch 3 makes it possible for xsk_socket__create(_shared) to
succeed even if the rx and tx XDP rings have already been set up by
introducing a new fields to struct xsk_umem which represent the ring
setup status for the xsk which shares the fd with the umem.

v3->v4:
* Reduced nesting in xsk_put_ctx as suggested by Alexei.
* Use bools instead of a u8 and flags to represent the
  ring setup status as suggested by Björn.

v2->v3:
* Instead of ignoring the return values of the setsockopt calls, introduce
  a new flag to determine whether or not to call them based on the ring
  setup status as suggested by Alexei.

v1->v2:
* Simplified restoring the _save pointers as suggested by Magnus.
* Fixed the condition which determines whether to unmap umem rings
 when socket create fails.

====================
Acked-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Prior to this commit xsk_socket__create(_shared) always attempted to create
the rx and tx rings for the socket. However this causes an issue when the
socket being setup is that which shares the fd with the UMEM. If a
previous call to this function failed with this socket after the rings were
set up, a subsequent call would always fail because the rings are not torn
down after the first call and when we try to set them up again we encounter
an error because they already exist. Solve this by remembering whether the
rings were set up by introducing new bools to struct xsk_umem which
represent the ring setup status and using them to determine whether or
not to set up the rings.

Fixes: 1cad0788 ("libbpf: add support for using AF_XDP sockets")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210331061218.1647-4-ciara.loftus@intel.com

If the call to xsk_socket__create fails, the user may want to retry the
socket creation using the same umem. Ensure that the umem is in the
same state on exit if the call fails by:
1. ensuring the umem _save pointers are unmodified.
2. not unmapping the set of umem rings that were set up with the umem
during xsk_umem__create, since those maps existed before the call to
xsk_socket__create and should remain in tact even in the event of
failure.

Fixes: 2f6324a3 ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210331061218.1647-3-ciara.loftus@intel.com

Calls to xsk_socket__create dereference the umem to access the
fill_save and comp_save pointers. Make sure the umem is non-NULL
before doing this.

Fixes: 2f6324a3 ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20210331061218.1647-2-ciara.loftus@intel.com

As for bpf_link, refuse creating a non-O_RDWR fd. Since program fds
currently don't allow modifications this is a precaution, not a
straight up bug fix.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210326160501.46234-2-lmb@cloudflare.com

Invoking BPF_OBJ_GET on a pinned bpf_link checks the path access
permissions based on file_flags, but the returned fd ignores flags.
This means that any user can acquire a "read-write" fd for a pinned
link with mode 0664 by invoking BPF_OBJ_GET with BPF_F_RDONLY in
file_flags. The fd can be used to invoke BPF_LINK_DETACH, etc.

Fix this by refusing non-O_RDWR flags in BPF_OBJ_GET. This works
because OBJ_GET by default returns a read write mapping and libbpf
doesn't expose a way to override this behaviour for programs
and links.

Fixes: 70ed506c ("bpf: Introduce pinnable bpf_link abstraction")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210326160501.46234-1-lmb@cloudflare.com

On x86 the struct pt_regs * grabbed by task_pt_regs() points to an
offset of task->stack. The pt_regs are later dereferenced in
__bpf_get_stack (e.g. by user_mode() check). This can cause a fault if
the task in question exits while bpf_get_task_stack is executing, as
warned by task_stack_page's comment:

* When accessing the stack of a non-current task that might exit, use
* try_get_task_stack() instead.  task_stack_page will return a pointer
* that could get freed out from under you.

Taking the comment's advice and using try_get_task_stack() and
put_task_stack() to hold task->stack refcount, or bail early if it's
already 0. Incrementing stack_refcount will ensure the task's stack
sticks around while we're using its data.

I noticed this bug while testing a bpf task iter similar to
bpf_iter_task_stack in selftests, except mine grabbed user stack, and
getting intermittent crashes, which resulted in dumps like:

  BUG: unable to handle page fault for address: 0000000000003fe0
  \#PF: supervisor read access in kernel mode
  \#PF: error_code(0x0000) - not-present page
  RIP: 0010:__bpf_get_stack+0xd0/0x230
  <snip...>
  Call Trace:
  bpf_prog_0a2be35c092cb190_get_task_stacks+0x5d/0x3ec
  bpf_iter_run_prog+0x24/0x81
  __task_seq_show+0x58/0x80
  bpf_seq_read+0xf7/0x3d0
  vfs_read+0x91/0x140
  ksys_read+0x59/0xd0
  do_syscall_64+0x48/0x120
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: fa28dcb8 ("bpf: Introduce helper bpf_get_task_stack()")
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210401000747.3648767-1-davemarchevsky@fb.com

If veb-stats was enabled, the ethtool stats triggered a warning
due to invalid size: 'unexpected stat size for veb.tc_%u_tx_packets'.
This was due to an incorrect structure definition for the statistics.
Structures and functions have been improved in line with requirements
for the presentation of statistics, in particular for the functions:
'i40e_add_ethtool_stats' and 'i40e_add_stat_strings'.

Fixes: 1510ae0b ("i40e: convert VEB TC stats to use an i40e_stats array")
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Fix so that single packets are received immediately instead of in
batches of 8. If you sent 1 pps to a system, you received 8 packets
every 8 seconds instead of 1 packet every second. The problem behind
this was that the work_done reporting from the Tx part of the driver
was broken. The work_done reporting in i40e controls not only the
reporting back to the napi logic but also the setting of the interrupt
throttling logic. When Tx or Rx reports that it has more to do,
interrupts are throttled or coalesced and when they both report that
they are done, interrupts are armed right away. If the wrong work_done
value is returned, the logic will start to throttle interrupts in a
situation where it should have just enabled them. This leads to the
undesired batching behavior seen in user-space.

Fix this by returning the correct boolean value from the Tx xsk
zero-copy path. Return true if there is nothing to do or if we got
fewer packets to process than we asked for. Return false if we got as
many packets as the budget since there might be more packets we can
process.

Fixes: 3106c580 ("i40e: Use batched xsk Tx interfaces to increase performance")
Reported-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Fixed new static analysis findings:
"warn: inconsistent indenting" - introduced lately,
reported with lkp and smatch build.

Fixes: 4b208eaa ("i40e: Add init and default config of software based DCB")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

xdp_return_frame() may be called outside of NAPI context to return
xdpf back to page_pool. xdp_return_frame() calls __xdp_return() with
napi_direct = false. For page_pool memory model, __xdp_return() calls
xdp_return_frame_no_direct() unconditionally and below false negative
kernel BUG throw happened under preempt-rt build:

[  430.450355] BUG: using smp_processor_id() in preemptible [00000000] code: modprobe/3884
[  430.451678] caller is __xdp_return+0x1ff/0x2e0
[  430.452111] CPU: 0 PID: 3884 Comm: modprobe Tainted: G     U      E     5.12.0-rc2+ #45

Changes in v2:
 - This patch fixes the issue by making xdp_return_frame_no_direct() is
   only called if napi_direct = true, as recommended for better by
   Jesper Dangaard Brouer. Thanks!

Fixes: 2539650f ("xdp: Helpers for disabling napi_direct of xdp_return_frame")
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit f211ac15.

We had similar attempt in the past, and we reverted it.

History:

64a14651 [NET]: Revert incorrect accept queue backlog changes.
8488df89 [NET]: Fix bugs in "Whether sock accept queue is full" checking

I am adding a fat comment so that future attempts will
be much harder.

Fixes: f211ac15 ("net: correct sk_acceptq_is_full()")
Cc: iuyacan <yacanliu@163.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5 fixes 2021-03-31

This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2021-03-31

1) Fix ipv4 pmtu checks for xfrm anf vti interfaces.
   From Eyal Birger.

2) There are situations where the socket passed to
   xfrm_output_resume() is not the same as the one
   attached to the skb. Use the socket passed to
   xfrm_output_resume() to avoid lookup failures
   when xfrm is used with VRFs.
   From Evan Nimmo.

3) Make the xfrm_state_hash_generation sequence counter per
   network namespace because but its write serialization
   lock is also per network namespace. Write protection
   is insufficient otherwise.
   From Ahmed S. Darwish.

4) Fixup sctp featue flags when used with esp offload.
   From Xin Long.

5) xfrm BEET mode doesn't support fragments for inner packets.
   This is a limitation of the protocol, so no fix possible.
   Warn at least to notify the user about that situation.
   From Xin Long.

6) Fix NULL pointer dereference on policy lookup when
   namespaces are uses in combination with esp offload.

7) Fix incorrect transformation on esp offload when
   packets get segmented at layer 3.

8) Fix some user triggered usages of WARN_ONCE in
   the xfrm compat layer.
   From Dmitry Safonov.

Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In rds_message_map_pages, the rm is freed by rds_message_put(rm).
But rm is still used by rm->data.op_sg in return value.

My patch assigns ERR_CAST(rm->data.op_sg) to err before the rm is
freed to avoid the uaf.

Fixes: 7dba9203 ("net/rds: Use ERR_PTR for rds_message_alloc_sgs()")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After a short network outage, the dst_entry is timed out and put
in DST_OBSOLETE_DEAD. We are in this code because arp reply comes
from this neighbour after network recovers. There is a potential
race condition that dst_entry is still in DST_OBSOLETE_DEAD.
With that, another neighbour lookup causes more harm than good.

In best case all packets in arp_queue are lost. This is
counterproductive to the original goal of finding a better path
for those packets.

I observed a worst case with 4.x kernel where a dst_entry in
DST_OBSOLETE_DEAD state is associated with loopback net_device.
It leads to an ethernet header with all zero addresses.
A packet with all zero source MAC address is quite deadly with
mac80211, ath9k and 802.11 block ack.  It fails
ieee80211_find_sta_by_ifaddr in ath9k (xmit.c). Ath9k flushes tx
queue (ath_tx_complete_aggr). BAW (block ack window) is not
updated. BAW logic is damaged and ath9k transmission is disabled.
Signed-off-by: Tong Zhu <zhutong@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

XSK wakeup flow triggers an IRQ by posting a NOP WQE and hitting
the doorbell on the async ICOSQ.
It maintains its state so that it doesn't issue another NOP WQE
if it has an outstanding one already.

For this flow to work properly, the NOP post must not fail.
Make sure to reserve room for the NOP WQE in all WQE posts to the
async ICOSQ.

Fixes: 8d94b590 ("net/mlx5e: Turn XSK ICOSQ into a general asynchronous one")
Fixes: 1182f365 ("net/mlx5e: kTLS, Add kTLS RX HW offload support")
Fixes: 0419d8c9 ("net/mlx5e: kTLS, Add kTLS RX resync support")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Current algorithm for encap keys is legacy from initial vxlan
implementation and doesn't take into account all possible fields of a
tunnel. For example, for a Geneve tunnel, which may have additional TLV
options, they are ignored when comparing encap keys and a rule can be
attached to an incorrect encap entry.

Fix that by introducing encap_info_equal() operation in
struct mlx5e_tc_tunnel. Geneve tunnel type uses custom implementation,
which extends generic algorithm and considers options if they are set.

Fixes: 7f1a546e ("net/mlx5e: Consider tunnel type for encap contexts")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Calculating the number of compeltion EQs based on the number of
available IRQ vectors doesn't work now that all async EQs share one IRQ.
Thus the max number of EQs can be exceeded on systems with more than
approximately 256 CPUs. Take this into account when calculating the
number of available completion EQs.

Fixes: 81bfa206 ("net/mlx5: Use a single IRQ for all async EQs")
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Some TLS RX counters increment per socket/connection, and are not
protected against parallel modifications from several cores.
Switch them to atomic counters by taking them out of the RQ stats into
the global atomic TLS stats.

In this patch, we touch 'rx_tls_ctx/del' that count the number of
device-offloaded RX TLS connections added/deleted.
These counters are updated in the add/del callbacks, out of the fast
data-path.

This change is not needed for counters that increment only in NAPI
context, as they are protected by the NAPI mechanism.
Keep them as tls_* counters under 'struct mlx5e_rq_stats'.

Fixes: 76c1e1ac ("net/mlx5e: kTLS, Add kTLS RX stats")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Some TLS TX counters increment per socket/connection, and are not
protected against parallel modifications from several cores.
Switch them to atomic counters by taking them out of the SQ stats into
the global atomic TLS stats.

In this patch, we touch a single counter 'tx_tls_ctx' that counts the
number of device-offloaded TX TLS connections added.
Now that this counter can be increased without the for having the SQ
context in hand, move it to the mlx5e_ktls_add_tx() callback where it
really belongs, out of the fast data-path.

This change is not needed for counters that increment only in NAPI
context or under the TX lock, as they are already protected.
Keep them as tls_* counters under 'struct mlx5e_sq_stats'.

Fixes: d2ead1f3 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Create send to vport miss group was added in order to support traffic
recirculation to root table with metadata source rewrite.
This group is created also in case source rewrite isn't supported.

Fixed by creating send to vport miss group only if source rewrite is
supported by FW.

Fixes: 8e404fef ("net/mlx5e: Match recirculated packet miss in slow table using reg_c1")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Use connector_type read from PTYS register when it's valid, based on
corresponding capability bit.

Fixes: 5b4793f8 ("net/mlx5e: Add support for reading connector type from PTYS")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>