1. 21 Jul, 2008 40 commits
    • David Brownell's avatar
      usb gadget serial: split out generic serial function · 61d8baea
      David Brownell authored
      Split out the generic serial support into a "function driver".  This
      closely mimics the ACM support, but with a MUCH simpler control model.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      61d8baea
    • David Brownell's avatar
      usb gadget serial: split out CDC ACM function · 4d5a73dc
      David Brownell authored
      Split out CDC ACM parts of "gadget serial" to a "function driver".
      Some key structural differences from the previous ACM support, shared
      with with the generic serial function (next patch):
      
       - As a function driver, it can be combined with other functions.
         One gadget configuration could offer both serial and network
         links, as an example.
      
       - One serial port can be exposed in multiple configurations;
         the /dev/ttyGS0 node could be exposed regardless of which
         config the host selected.
      
       - One configuration can expose multiple serial ports, such as
         ttyGS0, ttyGS1, ttyGS2, and ttyGS3.
      
      This code should be a lot easier to understand than the previous
      all-in-one-big-file version of the driver.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      4d5a73dc
    • David Brownell's avatar
      usb gadget zero: use composite gadget framework · 097db1d0
      David Brownell authored
      Update Gadget Zero to use the more modular versions of the loopback
      and source/sink configuration drivers which build on the new gadget
      framework code.
      
      The core code is a LOT simpler, and it should be much easier now to
      understand how the parts fit together.  The conversion is an overall
      source shrink in terms of this gadget, since it uses more midlayer
      support.  However, it's an overall increase in object size because
      there's less sharing between the two configurations (improves code
      clarity) and because the midlayer is a bit more functional than this
      driver actually needs.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      097db1d0
    • David Brownell's avatar
      usb gadget zero: split out loopback config · e5760fda
      David Brownell authored
      This splits the gadget zero "loopback" configuration into a standalone
      "configuration driver", building on the composite gadget framework code.
      It doesn't yet pull the original code out of gadget zero or update how
      that driver is built.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      e5760fda
    • David Brownell's avatar
      usb gadget zero: split out source/sink config · a400cadc
      David Brownell authored
      This splits the gadget zero "source/sink" configuration into a standalone
      "configuration driver", building on the composite gadget framework code.
      It doesn't yet pull the original code out of gadget zero or update how
      that driver is built.
      
      Neither this, nor its sibling "loopback" configuration, is a function
      driver that can be combined with other functions.  (The host "usbtest"
      driver wouldn't know how to deal with that!)  However the code becomes
      simpler because of this conversion, so it's a net win.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      a400cadc
    • David Brownell's avatar
      usb gadget: composite gadget core · 40982be5
      David Brownell authored
      Add <linux/usb/composite.h> interfaces for composite gadget drivers, and
      basic implementation support behind it:
      
        - struct usb_function ... groups one or more interfaces into a function
          managed as one unit within a configuration, to which it's added by
          usb_add_function().
      
        - struct usb_configuration ... groups one or more such functions into
          a configuration managed as one unit by a driver, to which it's added
          by usb_add_config().  These operate at either high or full/low speeds
          and at a given bMaxPower.
      
        - struct usb_composite_driver ... groups one or more such configurations
          into a gadget driver, which may be registered or unregistered.
      
        - struct usb_composite_dev ... a usb_composite_driver manages this; it
          wraps the usb_gadget exposed by the controller driver.
      
      This also includes some basic kerneldoc.
      
      How to use it (the short version):  provide a usb_composite_driver with a
      bind() that calls usb_add_config() for each of the needed configurations.
      The configurations in turn have bind() calls, which will usb_add_function()
      for each function required.  Each function's bind() allocates resources
      needed to perform its tasks, like endpoints; sometimes configurations will
      allocate resources too.
      
      Separate patches will convert most gadget drivers to this infrastructure.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      40982be5
    • David Brownell's avatar
      usb gadget: descriptor copying support · a4c39c41
      David Brownell authored
      Define three new descriptor manipulation utilities, for use when
      setting up functions that may have multiple instances:
      
      	usb_copy_descriptors() to copy a vector of descriptors
      	usb_free_descriptors() to free the copy
      	usb_find_endpoint() to find a copied version
      
      These will be used as follows.  Functions will continue to have static
      tables of descriptors they update, now used as __initdata templates.
      
      When a function creates a new instance, it patches those tables with
      relevant interface and string IDs, plus endpoint assignments.  Then it
      copies those morphed descriptors, associates the copies with the new
      function instance, and records the endpoint descriptors to use when
      activating the endpoints.  When initialization is done, only the copies
      remain in memory.  The copies are freed on driver removal.
      
      This ensures that each instance has descriptors which hold the right
      instance-specific data.  Two instances in the same configuration will
      obviously never share the same interface IDs or use the same endpoints.
      Instances in different configurations won't do so either, which means
      this is slightly less memory-efficient in some cases.
      
      This also includes a bugfix to the epautoconf code that shows up with
      this usage model.  It must replace the previous endpoint number when
      updating the template descriptors, not just mask in a few more bits.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      a4c39c41
    • David Brownell's avatar
      usb gadget: use new serial core · a7707adf
      David Brownell authored
      Teach "gadget serial" to use the new abstracted (and bugfixed) TTY glue,
      and remove all the orignal tangled-up code.  Update the documentation
      accordingly.  This is a net object code shrink and cleanup; it should
      make it a lot easier to see how the TTY glue should accomodate updates
      to the TTY layer, be bugfixed, etc.
      
      Notable behavior changes include:  it can now support getty even when
      there's no USB connection; it fits properly into the mdev/udev world;
      and RX handling is better (throttling works, and low latency).
      
      Configurations with scripts setting up the /dev/ttygserial device node
      (with "experimental" major number) may want to change that to be a
      symlink pointing to the /dev/ttyGS0 file, as a migration aid; else,
      just switch entirely over to mdev/udev.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      a7707adf
    • David Brownell's avatar
      usb gadget: split out serial core · c1dca562
      David Brownell authored
      This abstracts the "gadget serial" driver TTY glue into a separate
      component, cleaning it up and disentangling it from connection state.
      
      It also changed some behaviors for the better:
      
        - Stops using "experimental" major #127, and switches over to
          having the TTY layer allocate the dev_t numbers.
          
        - Provides /sys/class/tty/ttyGS* nodes, thus mdev/udev support.
          (Note "mdev" hotplug bug in Busybox v1.7.2: /dev/ttyGS0 will
          be a *block* device without CONFIG_SYSFS_DEPRECATED_V2.)
      
        - The tty nodes no longer reject opens when there's no host.
          Now they can support normal getty configs in /etc/inttab...
      
        - Now implements RX throttling.  When the line discipline says
          it doesn't want any more data, only packets in flight will be
          delivered (currently, max 1K/8K at full/high speeds) until it
          unthrottles the data.
      
        - Supports low_latency.  This is a good policy for all USB serial
          adapters, since it eliminates scheduler overhead on RX paths.
      
      This also includes much cleanup including better comments, fixing
      memory leaks and other bugs (including some locking fixes), messaging
      cleanup, and an interface audit and tightening.  This added up to a
      significant object code shrinkage, on the order of 20% (!) depending
      on CPU and compiler.
      
      A separate patch actually kicks in this new code, using the functions
      declared in this new header, and removes the previous glue.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      c1dca562
    • David Brownell's avatar
      USB: at91_udc: updated fifo sizes · bb24280f
      David Brownell authored
      It turns out newer versions of the AT91 UDC hardware have increased
      sizes of some of the FIFOs.  Reporting that is a Good Thing.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      bb24280f
    • Alexey Dobriyan's avatar
      USB: rndis: switch to seq_files · e184d5fc
      Alexey Dobriyan authored
      Signed-off-by: default avatarAlexey Dobriyan <adobriyan@gmail.com>
      Cc: David Brownell <david-b@pacbell.net>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      e184d5fc
    • Adrian Bunk's avatar
      USB: remove Documentation/usb/uhci.txt · baad4119
      Adrian Bunk authored
      The driver was removed before kernel 2.6.0
      Signed-off-by: default avatarAdrian Bunk <bunk@kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
      baad4119
    • Adrian Bunk's avatar
      USB: remove CVS keywords · ea05af61
      Adrian Bunk authored
      This patch removes CVS keywords that weren't updated for a long time
      from comments.
      Signed-off-by: default avatarAdrian Bunk <bunk@kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      ea05af61
    • Alan Stern's avatar
      usb-storage: implement "soft" unbinding · 543f7810
      Alan Stern authored
      This patch (as1092) implements "soft" unbinding for usb-storage.  When
      the disconnect routine is called, all commands and reset delays are
      allowed to complete normally until after scsi_remove_host() returns.
      This means that the commands needed for an orderly shutdown will be
      sent through to the device.
      
      Unlike before, the driver will now execute every command that it
      accepts.  Hence there's no need for special code to catch unexecuted
      commands and fail them.
      
      The new sequence of events when disconnect runs goes as follows:
      
      	If the device is truly unplugged, set the DISCONNECTING
      	flag so we won't try to access it any more.
      
      	If the SCSI-scanning thread hasn't started up yet, prevent
      	it from doing anything by setting the new DONT_SCAN flag.
      	Then wake it up and wait for it to terminate.
      
      	Remove the SCSI host.  This unbinds the upper-level drivers,
      	doing an orderly shutdown.  Commands sent to quiesce the
      	device will be transmitted normally, unless the device is
      	unplugged.
      
      	Set the DISCONNECTING flag so that we won't accept any new
      	commands that might get submitted (there aren't supposed to be
      	any) and we won't try to access the device for resets.
      
      	Tell the control thread to exit by waking it up with no
      	pending command, and wait for it to terminate.
      
      	Go on to do all the other normal stuff: releasing resources,
      	freeing memory, and so on.
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      543f7810
    • Alan Stern's avatar
      USB: implement "soft" unbinding · 9da82bd4
      Alan Stern authored
      This patch (as1091) changes the way usbcore handles interface
      unbinding.  If the interface's driver supports "soft" unbinding (a new
      flag in the driver structure) then in-flight URBs are not cancelled
      and endpoints are not disabled.  Instead the driver is allowed to
      continue communicating with the device (although of course it should
      stop before its disconnect routine returns).
      
      The purpose of this change is to allow drivers to do a clean shutdown
      when they get unbound from a device that is still plugged in.  Killing
      all the URBs and disabling the endpoints before calling the driver's
      disconnect method doesn't give the driver any control over what
      happens, and it can leave devices in indeterminate states.  For
      example, when usb-storage unbinds it doesn't want to stop while in the
      middle of transmitting a SCSI command.
      
      The soft_unbind flag is added because in the past, a number of drivers
      have experienced problems related to ongoing I/O after their disconnect
      routine returned.  Hence "soft" unbinding is made available only to
      drivers that claim to support it.
      
      The patch also replaces "interface_to_usbdev(intf)" with "udev" in a
      couple of places, a minor simplification.
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      9da82bd4
    • Adrian Bunk's avatar
      USB: isp1760-hcd.c: make 2 functions static · 473bca94
      Adrian Bunk authored
      This patch makes the following needlessly global functions static:
      - enqueue_an_ATL_packet()
      - enqueue_an_INT_packet()
      Signed-off-by: default avatarAdrian Bunk <bunk@kernel.org>
      Acked-by: default avatarSebastian Siewior <bigeasy@linutronix.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      473bca94
    • Alan Stern's avatar
      usb-storage: change remaining semaphore to completion · 7119e3c3
      Alan Stern authored
      This patch (as1090) converts the one remaining semaphore in
      usb-storage into a completion.
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      7119e3c3
    • Alan Stern's avatar
      usb-storage: separate dynamic flags from fixed flags · 7e4d6c38
      Alan Stern authored
      This patch (as1089) separates out the dynamic atomic bitflags and the
      static bitfields in usb-storage.  Until now the two sorts of flags
      have been sharing the same word; this has always been awkward.
      
      To help prevent possible confusion, the two new fields each have a
      different name from the original.  us->fflags contains the fixed
      bitfields (mostly taken from the USB ID table in unusual_devs.h), and
      us->dflags contains the dynamic atomic bitflags (used with set_bit,
      test_bit, and so on).
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      7e4d6c38
    • Alan Cox's avatar
      USB: io_ti: FIrst cut at a big clean up · 2742fd88
      Alan Cox authored
      Sort out the insane naming like "OperationalFirmwareVersion" which seems
      	designed to cause formatting problems and RSI
      Merge various common code together
      Clean up the pointlessly complex and spread about MCR handling
      
      This is really just the low hanging fruit.
      
      Needs lots of testing before it goes upstream so testers and reports
      appreciated
      Signed-off-by: default avatarAlan Cox <alan@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      2742fd88
    • Alan Stern's avatar
      USB: combine hub_quiesce and hub_stop · 4330354f
      Alan Stern authored
      This patch (as1083) combines hub_quiesce() and hub_stop() into a
      single routine.  There's no point keeping them separate since they are
      usually called together.
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      4330354f
    • Alan Stern's avatar
      USB: combine hub_activate and hub_restart · f2835219
      Alan Stern authored
      This patch (as1071) combines hub_activate() and hub_restart() into a
      single routine.  There's no point keeping them separate, since they
      are always called together.
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      f2835219
    • Alan Stern's avatar
      USB: optimize port debouncing during hub activation · 948fea37
      Alan Stern authored
      This patch (as1082) makes a small optimization to the way the hub
      driver carries out port debouncing immediately after a hub is
      activated (i.e., initialized, reset, or resumed).  If any port-change
      statuses are observed, the code will delay for a minimal debounce
      period -- thereby making a good start at debouncing all the ports at
      once.
      
      If this wasn't sufficient then khubd will debounce any port that still
      requires attention.  But in most cases it should suffice; it's rare
      for a device to need more than a minimal debounce delay.  (In the
      cases of hub initialization or reset even that is most likely not
      needed, since any devices plugged in at such times have probably been
      attached for a while.)
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      948fea37
    • Alan Stern's avatar
      USB: try to salvage lost power sessions · 8808f00c
      Alan Stern authored
      This patch (as1073) adds to khubd a way to recover from power-session
      interruption caused by transient connect-change or enable-change
      events.  After the debouncing period, khubd attempts to do a
      USB-Persist-style reset or reset-resume.  If it works, the connection
      will remain unscathed.
      
      The upshot is that we will be more immune to noise caused by EMI.  The
      grace period is on the order of 100 ms, so this won't permit recovery
      from the "accidentally knocked the USB cable out of its socket" type
      of event, but it's a start.
      
      As an added bonus, if a device was suspended when the system goes to
      sleep then we no longer need to check for power-session interruptions
      when the system wakes up.  Khubd will naturally see the status change
      while processing the device's parent hub and will do the right thing.
      
      The remote_wakeup() routine is changed; now it expects the caller to
      acquire the device lock rather than acquiring the lock itself.
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      8808f00c
    • Alan Stern's avatar
      USB: simplify hub_restart() logic · 6ee0b270
      Alan Stern authored
      This patch (as1081) straightens out the logic of the hub_restart()
      routine.  Each port of the hub is scanned and the driver makes sure
      that ports which are supposed to be disabled really _are_ disabled.
      Any ports with a significant change in status are flagged in
      hub->change_bits, so that khubd can focus on them without the need to
      scan all the ports a second time -- which means the hub->activating
      flag is no longer needed.
      
      Also, it is now recognized explicitly that the only reason for
      resuming a port which was not suspended is to carry out a reset-resume
      operation, which happens only in a non-CONFIG_USB_SUSPEND setting.
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      6ee0b270
    • Greg Kroah-Hartman's avatar
      USB: revert "don't use reset-resume if drivers don't support it" · 9e5eace7
      Greg Kroah-Hartman authored
      This reverts Linus's previous patch that is in mainline to make it
      easier for the USB hub.c patches that follow this to apply cleanly.  The
      functionality will be added back in a followon patch in this series.
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      9e5eace7
    • Alan Stern's avatar
      USB: debounce before unregistering · 24618b0c
      Alan Stern authored
      This patch (as1080) makes a significant change to the way khubd
      handles port connect-change and enable-change events.  Both types of
      event are now debounced, and the debouncing is carried out _before_ an
      existing usb_device is unregistered, instead of afterward.
      
      This means that drivers will have to deal with longer runs of errors
      when a device is unplugged, but they are supposed to be prepared for
      that in any case.
      
      The advantage is that when an enable-change occurs (caused for example
      by electromagnetic interference), the debouncing period will provide
      time for the cause of the problem to die away.  A simple port reset
      (added in a forthcoming patch) will then allow us to recover from the
      fault.
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      24618b0c
    • Alan Stern's avatar
      USB: add new routine for checking port-resume type · b01b03f3
      Alan Stern authored
      This patch (as1070) creates a new subroutine to check whether a device
      can be resumed.  This code is needed even when CONFIG_USB_SUSPEND
      isn't set, because devices do suspend themselves when the root hub
      (and hence the entire bus) is suspended, and power sessions can get
      lost during a system sleep even without individual port suspends.
      
      The patch also fixes a loose end in USB-Persist reset-resume handling.
      When a low- or full-speed device is attached to an EHCI's companion
      controller, the port handoff during resume will cause the companion
      port's connect-status-change feature to be set.  If that flag isn't
      cleared, the port-reset code will think it indicates that the device
      has been unplugged and the reset-resume will fail.
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      b01b03f3
    • Harvey Harrison's avatar
    • Kay Sievers's avatar
      USB: usb dev_set_name() instead of dev->bus_id · 0031a06e
      Kay Sievers authored
      The bus_id field is going away, use the dev_set_name() function
      to set it properly.
      Signed-off-by: default avatarKay Sievers <kay.sievers@vrfy.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      0031a06e
    • Kay Sievers's avatar
      USB: usb dev_name() instead of dev->bus_id · 7071a3ce
      Kay Sievers authored
      The bus_id field is going away, use the dev_name() function instead.
      Signed-off-by: default avatarKay Sievers <kay.sievers@vrfy.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      7071a3ce
    • Greg Kroah-Hartman's avatar
      USB: revert "don't lose disconnections during suspend" · 36aa8117
      Greg Kroah-Hartman authored
      This reverts Alan's previous patch so that the recent Hub changes will
      apply cleanly.  The above mentioned patch was needed for 2.6.26 to work
      properly.
      
      Cc: Alan Stern <stern@rowland.harvard.edu>
      Cc: Lukas Hejtmanek <xhejtman@ics.muni.cz>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      36aa8117
    • Greg Kroah-Hartman's avatar
      USB: handle pci_name() being const · 1b26da15
      Greg Kroah-Hartman authored
      This changes usb_create_hcd() to be able to handle the fact that
      pci_name() has changed to a constant string.
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      1b26da15
    • Andrew Lunn's avatar
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 · e89970aa
      Linus Torvalds authored
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
        netfilter: nf_conntrack_sctp: fix sparse warnings
        netfilter: nf_nat_sip: c= is optional for session
        netfilter: xt_TCPMSS: collapse tcpmss_reverse_mtu{4,6} into one function
        netfilter: nfnetlink_log: send complete hardware header
        netfilter: xt_time: fix time's time_mt()'s use of do_div()
        netfilter: accounting rework: ct_extend + 64bit counters (v4)
        netlink: add NLA_PUT_BE64 macro
        netfilter: nf_nat_core: eliminate useless find_appropriate_src for IP_NAT_RANGE_PROTO_RANDOM
        hdlcdrv: Fix CRC calculation.
        Revert "pkt_sched: Make default qdisc nonshared-multiqueue safe."
        net: In __netif_schedule() use WARN_ON instead of BUG_ON
        net: Improve simple_tx_hash().
        pkt_sched: Remove unused variable skb in dev_deactivate_queue function.
        sunhme: Remove stop/wake TX queue calls in set-multicast-list handler.
        ucc_geth: do not touch net queue in adjust_link phylib callback
        gianfar: do not touch net queue in adjust_link phylib callback
        atl1: Do not wake queue before queue has been started.
      e89970aa
    • Randy Dunlap's avatar
      pci kernel-doc fatal error · 443bd1c4
      Randy Dunlap authored
      Fix kernel-doc comments so that they don't produce errors.
      Also cut some extraneous copy-paste text.
      
      Error(linhead//drivers/pci/pci.c:1133): duplicate section name 'Description'
      Error(linhead//drivers/pci/pci.c:1189): duplicate section name 'Description'
      Signed-off-by: default avatarRandy Dunlap <randy.dunlap@oracle.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      443bd1c4
    • Linus Torvalds's avatar
      Merge branch 'x86/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip · 72a73693
      Linus Torvalds authored
      * 'x86/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (160 commits)
        x86: remove extra calling to get ext cpuid level
        x86: use setup_clear_cpu_cap() when disabling the lapic
        KVM: fix exception entry / build bug, on 64-bit
        x86: add unknown_nmi_panic kernel parameter
        x86, VisWS: turn into generic arch, eliminate leftover files
        x86: add ->pre_time_init to x86_quirks
        x86: extend and use x86_quirks to clean up NUMAQ code
        x86: introduce x86_quirks
        x86: improve debug printout: add target bootmem range in early_res_to_bootmem()
        Subject: devmem, x86: fix rename of CONFIG_NONPROMISC_DEVMEM
        x86: remove arch_get_ram_range
        x86: Add a debugfs interface to dump PAT memtype
        x86: Add a arch directory for x86 under debugfs
        x86: i386: reduce boot fixmap space
        i386/xen: add proper unwind annotations to xen_sysenter_target
        x86: reduce force_mwait visibility
        x86: reduce forbid_dac's visibility
        x86: fix two modpost warnings
        x86: check function status in EDD boot code
        x86_64: ia32_signal.c: remove signal number conversion
        ...
      72a73693
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm · b7e6f62f
      Linus Torvalds authored
      * git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
        dm crypt: add merge
        dm table: remove merge_bvec sector restriction
        dm: linear add merge
        dm: introduce merge_bvec_fn
        dm snapshot: use per device mempools
        dm snapshot: fix race during exception creation
        dm snapshot: track snapshot reads
        dm mpath: fix test for reinstate_path
        dm mpath: return parameter error
        dm io: remove struct padding
        dm log: make dm_dirty_log init and exit static
        dm mpath: free path selector on invalid args
      b7e6f62f
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://neil.brown.name/md · 8a392625
      Linus Torvalds authored
      * 'for-linus' of git://neil.brown.name/md: (52 commits)
        md: Protect access to mddev->disks list using RCU
        md: only count actual openers as access which prevent a 'stop'
        md: linear: Make array_size sector-based and rename it to array_sectors.
        md: Make mddev->array_size sector-based.
        md: Make super_type->rdev_size_change() take sector-based sizes.
        md: Fix check for overlapping devices.
        md: Tidy up rdev_size_store a bit:
        md: Remove some unused macros.
        md: Turn rdev->sb_offset into a sector-based quantity.
        md: Make calc_dev_sboffset() return a sector count.
        md: Replace calc_dev_size() by calc_num_sectors().
        md: Make update_size() take the number of sectors.
        md: Better control of when do_md_stop is allowed to stop the array.
        md: get_disk_info(): Don't convert between signed and unsigned and back.
        md: Simplify restart_array().
        md: alloc_disk_sb(): Return proper error value.
        md: Simplify sb_equal().
        md: Simplify uuid_equal().
        md: sb_equal(): Fix misleading printk.
        md: Fix a typo in the comment to cmd_match().
        ...
      8a392625
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input · 519f0141
      Linus Torvalds authored
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (48 commits)
        Input: add switch for dock events
        Input: add microphone insert switch definition
        Input: i8042 - add Arima-Rioworks HDAMB board to noloop list
        Input: sgi_btns - add support for SGI Indy volume buttons
        Input: add option to disable HP SDC driver
        Input: serio - trivial documentation fix
        Input: add new serio driver for Xilinx XPS PS2 IP
        Input: add driver for Tabletkiosk Sahara TouchIT-213 touchscreen
        Input: new driver for SGI O2 volume buttons
        Input: yealink - reliably kill urbs
        Input: q40kbd - make q40kbd_lock static
        Input: gtco - eliminate early return
        Input: i8042 - add Dritek quirk for Acer Aspire 5720
        Input: usbtouchscreen - ignore eGalax screens supporting HID protocol
        Input: i8042 - add Medion NAM 2070 to noloop blacklist
        Input: i8042 - add Gericom Bellagio to nomux blacklist
        Input: i8042 - add Acer Aspire 1360 to nomux blacklist
        Input: hp_sdc_mlc.c - make a struct static
        Input: hil_mlc.c - make code static
        Input: wistron - generate normal key event if bluetooth or wifi not present
        ...
      519f0141
    • Patrick McHardy's avatar
      netfilter: nf_conntrack_sctp: fix sparse warnings · 5547cd0a
      Patrick McHardy authored
      Introduced by a258860e (netfilter: ctnetlink: add full support for SCTP to ctnetlink):
      
      net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: cast from restricted type
      net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: incorrect type in argument 1 (different base types)
      net/netfilter/nf_conntrack_proto_sctp.c:483:2:    expected unsigned int [unsigned] [usertype] x
      net/netfilter/nf_conntrack_proto_sctp.c:483:2:    got restricted unsigned int const <noident>
      net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: cast from restricted type
      net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: cast from restricted type
      net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: cast from restricted type
      net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: cast from restricted type
      net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: cast from restricted type
      net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: incorrect type in argument 1 (different base types)
      net/netfilter/nf_conntrack_proto_sctp.c:487:2:    expected unsigned int [unsigned] [usertype] x
      net/netfilter/nf_conntrack_proto_sctp.c:487:2:    got restricted unsigned int const <noident>
      net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: cast from restricted type
      net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: cast from restricted type
      net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: cast from restricted type
      net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: cast from restricted type
      net/netfilter/nf_conntrack_proto_sctp.c:532:42: warning: incorrect type in assignment (different base types)
      net/netfilter/nf_conntrack_proto_sctp.c:532:42:    expected restricted unsigned int <noident>
      net/netfilter/nf_conntrack_proto_sctp.c:532:42:    got unsigned int
      net/netfilter/nf_conntrack_proto_sctp.c:534:39: warning: incorrect type in assignment (different base types)
      net/netfilter/nf_conntrack_proto_sctp.c:534:39:    expected restricted unsigned int <noident>
      net/netfilter/nf_conntrack_proto_sctp.c:534:39:    got unsigned int
      Signed-off-by: default avatarPatrick McHardy <kaber@trash.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5547cd0a