Pull spi updates from Mark Brown:
 "A fairly quiet release for SPI, mainly driver work.  A few highlights:

   - Supports bits per word compatibility checking in the core.
   - Allow use of the IP used in Freescale SPI controllers outside
     Freescale SoCs.
   - DMA support for the Atmel SPI driver.
   - New drivers for the BCM2835 and Tegra114"

* tag 'spi-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (68 commits)
  spi-topcliff-pch: fix to use list_for_each_entry_safe() when delete list items
  spi-topcliff-pch: missing platform_driver_unregister() on error in pch_spi_init()
  ARM: dts: add pinctrl property for spi node for atmel SoC
  ARM: dts: add spi nodes for the atmel boards
  ARM: dts: add spi nodes for atmel SoC
  ARM: at91: add clocks for spi dt entries
  spi/spi-atmel: add dmaengine support
  spi/spi-atmel: add flag to controller data for lock operations
  spi/spi-atmel: add physical base address
  spi/sirf: fix MODULE_DEVICE_TABLE
  MAINTAINERS: Add git repository and update my address
  spi/s3c64xx: Check for errors in dmaengine prepare_transfer()
  spi/s3c64xx: Fix non-dmaengine usage
  spi: omap2-mcspi: fix error return code in omap2_mcspi_probe()
  spi/s3c64xx: let device core setup the default pin configuration
  MAINTAINERS: Update Grant's email address and maintainership
  spi: omap2-mcspi: Fix transfers if DMADEVICES is not set
  spi: s3c64xx: move to generic dmaengine API
  spi-gpio: init CS before spi_bitbang_setup()
  spi: spi-mpc512x-psc: let transmiter/receiver enabled when in xfer loop
  ...

Pull regulator updates from Mark Brown:
 "The diffstat and changelog here is dominated by Lee Jones' heroic
  efforts to sync the ab8500 driver that's been maintained out of tree
  with mainline (plus Axel's cleanup work on the results) but there's a
  few other things here:

   - Axel Lin added regulator_map_voltage_ascend() optimising a common
     pattern for drivers using the core code.
   - Milo Kim tought the regulator core to handle regulators sharing an
     enable GPIO, avoiding the need to do hacks to support such systems.
   - Andrew Bresticker added code to handle missing supplies for
     regulators more sensibly for device tree systems, reducing the need
     for stubbing there.

  plus the usual batch of driver specific updates and fixes"

* tag 'regulator-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (152 commits)
  regulator: mc13892: Fix MC13892_SWITCHERS0_SWxHI bit in set_voltage_sel
  regulator: Remove NULL test before calling regulator_unregister()
  regulator: mc13783: Add device tree probe support
  regulator: mc13xxx: Add warning of incorrect names of regulators
  regulator: max77686: Don't update max77686->opmode if update register fails
  regulator: max8952: Add missing config.of_node setting for regulator register
  regulator: ab3100: Fix regulator register error handling
  regulator: tps6524x: Use regulator_map_voltage_ascend
  regulator: lp8788-buck: Use regulator_map_voltage_ascend
  regulator: lp872x: Use regulator_map_voltage_ascend
  regulator: mc13892: Use regulator_map_voltage_ascend for mc13892_sw_regulator_ops
  regulator: tps65023: Use regulator_map_voltage_ascend
  regulator: tps65023: Merge tps65020 ldo1 and ldo2 vsel table
  regulator: tps6507x: Use regulator_map_voltage_ascend
  regulator: mc13892: Fix MC13892_SWITCHERS0_SWxHI bit in set_voltage_sel
  regulator: ab3100: device tree support
  regulator: ab3100: refactor probe to use IDs
  regulator: max8973: Don't override control1 variable when set ramp delay bits
  regulator: tps80031: Convert tps80031_dcdc_ops to [get|set]_voltage_sel_regmap
  regulator: tps80031: Fix LDO2 track mode for TPS80031 or TPS80032-ES1.0
  ...

Pull regmap updates from Mark Brown:
 "In user visible terms just a couple of enhancements here, though there
  was a moderate amount of refactoring required in order to support the
  register cache sync performance improvements.

   - Support for block and asynchronous I/O during register cache
     syncing; this provides a use case dependant performance
     improvement.
   - Additional debugfs information on the memory consuption and
     register set"

* tag 'regmap-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (23 commits)
  regmap: don't corrupt work buffer in _regmap_raw_write()
  regmap: cache: Fix format specifier in dev_dbg
  regmap: cache: Make regcache_sync_block_raw static
  regmap: cache: Write consecutive registers in a single block write
  regmap: cache: Split raw and non-raw syncs
  regmap: cache: Factor out block sync
  regmap: cache: Factor out reg_present support from rbtree cache
  regmap: cache: Use raw I/O to sync rbtrees if we can
  regmap: core: Provide regmap_can_raw_write() operation
  regmap: cache: Provide a get address of value operation
  regmap: Cut down on the average # of nodes in the rbtree cache
  regmap: core: Make raw write available to regcache
  regmap: core: Warn on invalid operation combinations
  regmap: irq: Clarify error message when we fail to request primary IRQ
  regmap: rbtree Expose total memory consumption in the rbtree debugfs entry
  regmap: debugfs: Add a registers `range' file
  regmap: debugfs: Simplify calculation of `c->max_reg'
  regmap: cache: Store caches in native register format where possible
  regmap: core: Split out in place value parsing
  regmap: cache: Use regcache_get_value() to check if we updated
  ...

Pull ktest update from Steven Rostedt:
 "A couple of fixes to handle a config file that tests multiple machines
  and has conflicts it the grub menus.  That is, if the machines use the
  same grub menu name, but they are at different locations in the
  menu.lst file"

* tag 'ktest-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Reset grub menu cache with different machines
  ktest: Allow tests to use different GRUB_MENUs

Pull tracing updates from Steven Rostedt:
 "Along with the usual minor fixes and clean ups there are a few major
  changes with this pull request.

   1) Multiple buffers for the ftrace facility

  This feature has been requested by many people over the last few
  years.  I even heard that Google was about to implement it themselves.
  I finally had time and cleaned up the code such that you can now
  create multiple instances of the ftrace buffer and have different
  events go to different buffers.  This way, a low frequency event will
  not be lost in the noise of a high frequency event.

  Note, currently only events can go to different buffers, the tracers
  (ie function, function_graph and the latency tracers) still can only
  be written to the main buffer.

   2) The function tracer triggers have now been extended.

  The function tracer had two triggers.  One to enable tracing when a
  function is hit, and one to disable tracing.  Now you can record a
  stack trace on a single (or many) function(s), take a snapshot of the
  buffer (copy it to the snapshot buffer), and you can enable or disable
  an event to be traced when a function is hit.

   3) A perf clock has been added.

  A "perf" clock can be chosen to be used when tracing.  This will cause
  ftrace to use the same clock as perf uses, and hopefully this will
  make it easier to interleave the perf and ftrace data for analysis."

* tag 'trace-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (82 commits)
  tracepoints: Prevent null probe from being added
  tracing: Compare to 1 instead of zero for is_signed_type()
  tracing: Remove obsolete macro guard _TRACE_PROFILE_INIT
  ftrace: Get rid of ftrace_profile_bits
  tracing: Check return value of tracing_init_dentry()
  tracing: Get rid of unneeded key calculation in ftrace_hash_move()
  tracing: Reset ftrace_graph_filter_enabled if count is zero
  tracing: Fix off-by-one on allocating stat->pages
  kernel: tracing: Use strlcpy instead of strncpy
  tracing: Update debugfs README file
  tracing: Fix ftrace_dump()
  tracing: Rename trace_event_mutex to trace_event_sem
  tracing: Fix comment about prefix in arch_syscall_match_sym_name()
  tracing: Convert trace_destroy_fields() to static
  tracing: Move find_event_field() into trace_events.c
  tracing: Use TRACE_MAX_PRINT instead of constant
  tracing: Use pr_warn_once instead of open coded implementation
  ring-buffer: Add ring buffer startup selftest
  tracing: Bring Documentation/trace/ftrace.txt up to date
  tracing: Add "perf" trace_clock
  ...

Conflicts:
	kernel/trace/ftrace.c
	kernel/trace/trace.c

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big USB pull request for 3.10-rc1.

  Lots of USB patches here, the majority being USB gadget changes and
  USB-serial driver cleanups, the rest being ARM build fixes / cleanups,
  and individual driver updates.  We also finally got some chipidea
  fixes, which have been delayed for a number of kernel releases, as the
  maintainer has now reappeared.

  All of these have been in linux-next for a while"

* tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (568 commits)
  USB: ehci-msm: USB_MSM_OTG needs USB_PHY
  USB: OHCI: avoid conflicting platform drivers
  USB: OMAP: ISP1301 needs USB_PHY
  USB: lpc32xx: ISP1301 needs USB_PHY
  USB: ftdi_sio: enable two UART ports on ST Microconnect Lite
  usb: phy: tegra: don't call into tegra-ehci directly
  usb: phy: phy core cannot yet be a module
  USB: Fix initconst in ehci driver
  usb-storage: CY7C68300A chips do not support Cypress ATACB
  USB: serial: option: Added support Olivetti Olicard 145
  USB: ftdi_sio: correct ST Micro Connect Lite PIDs
  ARM: mxs_defconfig: add CONFIG_USB_PHY
  ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY
  usb: phy: remove exported function from __init section
  usb: gadget: zero: put function instances on unbind
  usb: gadget: f_sourcesink.c: correct a copy-paste misnomer
  usb: gadget: cdc2: fix error return code in cdc_do_config()
  usb: gadget: multi: fix error return code in rndis_do_config()
  usb: gadget: f_obex: fix error return code in obex_bind()
  USB: storage: convert to use module_usb_driver()
  ...

Pull tty/serial driver update from Greg Kroah-Hartman:
 "Here's the big tty/serial driver merge request for 3.10-rc1

  Once again, Jiri has a number of TTY driver fixes and cleanups, and
  Peter Hurley came through with a bunch of ldisc fixes that resolve a
  number of reported issues.  There are some other serial driver
  cleanups as well.

  All of these have been in the linux-next tree for a while"

* tag 'tty-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (117 commits)
  tty/serial/sirf: fix MODULE_DEVICE_TABLE
  serial: mxs: drop superfluous {get|put}_device
  serial: mxs: fix buffer overflow
  ARM: PL011: add support for extended FIFO-size of PL011-r1p5
  serial_core.c: add put_device() after device_find_child()
  tty: Fix unsafe bit ops in tty_throttle_safe/unthrottle_safe
  serial: sccnxp: Replace pdata.init/exit with regulator API
  serial: sccnxp: Do not override device name
  TTY: pty, fix compilation warning
  TTY: rocket, fix compilation warning
  TTY: ircomm: fix DTR being raised on hang up
  TTY: synclinkmp: fix DTR being raised on hang up
  TTY: synclink_gt: fix DTR being raised on hang up
  TTY: synclink: fix DTR being raised on hang up
  serial: 8250_dw: Fix the stub for dw8250_probe_acpi()
  serial: 8250_dw: Convert to devm_ioremap()
  serial: 8250_dw: Set port capabilities based on CPR register
  serial: 8250_dw: Let ACPI code extract the DMA client info
  serial: 8250_dw: Support clk framework also with ACPI
  serial: 8250_dw: Enable runtime PM
  ...

Pull staging driver tree update from Greg Kroah-Hartman:
 "Here's the big staging driver tree update for 3.10-rc1

  This update contains loads of comedi driver cleanups and fixes in
  here, iio updates, android driver changes, and other various staging
  driver cleanups.

  Thanks to some drivers being removed, and the comedi driver cleanups,
  we have removed more code than we added:

   627 files changed, 65145 insertions(+), 76321 deletions(-)

  which is always nice to see.

  All of these have been in linux-next for a while."

* tag 'staging-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (940 commits)
  staging: comedi: ni_labpc: fix legacy driver build
  staging: comedi: das800: cleanup the cio-das802/16 fifo comments
  staging: comedi: das800: rename CamelCase vars in das800_ai_do_cmd()
  staging: comedi: das800: tidy up the private data
  staging: comedi: das800: tidy up das800_interrupt()
  staging: comedi: das800: tidy up das800_ai_insn_read()
  staging: comedi: das800: tidy up das800_di_insn_bits()
  staging: comedi: das800: tidy up das800_do_insn_bits()
  staging: comedi: das800: remove extra divisor calculation call
  staging: comedi: das800: rename {enable,disable}_das800
  staging: comedi: das800: tidy up subdevice init
  staging: comedi: das800: allow attaching without interrupt support
  staging: comedi: das800: interrupts are required for async command support
  staging: comedi: das800: tidy up das800_ai_do_cmdtest()
  staging: comedi: das800: remove 'volatile' on private data variables
  staging: comedi: das800: cleanup the boardinfo
  staging: comedi: das800: cleanup range table declarations
  staging: comedi: das800: introduce das800_ind_{write, read}()
  staging: comedi: das800: remove forward declarations
  staging: comedi: das800: move das800_set_frequency()
  ...

Merge tag 'driver-core-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg Kroah-Hartman:
 "Here's the merge request for the driver core tree for 3.10-rc1

  It's pretty small, just a number of driver core and sysfs updates and
  fixes, all of which have been in linux-next for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed conflict in kernel/rtmutex-tester.c, the locking tree had a better
fix for the same sysfs file mode problem.

* tag 'driver-core-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  PM / Runtime: Idle devices asynchronously after probe|release
  driver core: handle user namespaces properly with the uid/gid devtmpfs change
  driver core: devtmpfs: fix compile failure with CONFIG_UIDGID_STRICT_TYPE_CHECKS
  devtmpfs: add base.h include
  driver core: add uid and gid to devtmpfs
  sysfs: check if one entry has been removed before freeing
  sysfs: fix crash_notes_size build warning
  sysfs: fix use after free in case of concurrent read/write and readdir
  rtmutex-tester: fix mode of sysfs files
  Documentation: Add ABI entry for crash_notes and crash_notes_size
  sysfs: Add crash_notes_size to export percpu note size
  driver core: platform_device.h: fix checkpatch errors and warnings
  driver core: platform.c: fix checkpatch errors and warnings
  driver core: warn that platform_driver_probe can not use deferred probing
  sysfs: use atomic_inc_unless_negative in sysfs_get_active
  base: core: WARN() about bogus permissions on device attributes
  device: separate all subsys mutexes

Pull char/misc driver update from Greg Kroah-Hartman:
 "Here's the big char / misc driver update for 3.10-rc1

  A number of various driver updates, the majority being new
  functionality in the MEI driver subsystem (it's now a subsystem, it
  started out just a single driver), extcon updates, memory updates,
  hyper-v updates, and a bunch of other small stuff that doesn't fit in
  any other tree.

  All of these have been in linux-next for a while"

* tag 'char-misc-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (148 commits)
  Tools: hv: Fix a checkpatch warning
  tools: hv: skip iso9660 mounts in hv_vss_daemon
  tools: hv: use FIFREEZE/FITHAW in hv_vss_daemon
  tools: hv: use getmntent in hv_vss_daemon
  Tools: hv: Fix a checkpatch warning
  tools: hv: fix checks for origin of netlink message in hv_vss_daemon
  Tools: hv: fix warnings in hv_vss_daemon
  misc: mark spear13xx-pcie-gadget as broken
  mei: fix krealloc() misuse in in mei_cl_irq_read_msg()
  mei: reduce flow control only for completed messages
  mei: reseting -> resetting
  mei: fix reading large reposnes
  mei: revamp mei_irq_read_client_message function
  mei: revamp mei_amthif_irq_read_message
  mei: revamp hbm state machine
  Revert "drivers/scsi: use module_pcmcia_driver() in pcmcia drivers"
  Revert "scsi: pcmcia: nsp_cs: remove module init/exit function prototypes"
  scsi: pcmcia: nsp_cs: remove module init/exit function prototypes
  mei: wd: fix line over 80 characters
  misc: tsl2550: Use dev_pm_ops
  ...

Pull hwmon update from Guenter Roeck:

 - New drivers for NCT6775, NCT6776, NCT6779, and LM95234.

 - Added support for LTC2974, LTC3883, LM25056, TMP431, TMP432, ADT7310,
   and ADT7320 to existing drivers.

 - Various code cleanups and minor improvements.

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (54 commits)
  hwmon: (nct6775) Fix coding style problems
  hwmon: (nct6775) Constify strings
  hwmon: (tmp401) Add support for TMP432
  hwmon: (tmp401) Add support for update_interval attribute
  hwmon: (tmp401) Reset valid flag when resetting temperature history
  hwmon: (tmp401) Simplification and cleanup
  hwmon: (tmp401) Use sysfs_create_group / sysfs_remove_group
  hwmon: (tmp401) Drop unused defines, use BIT for bit masks
  hwmon: (nct6775) Use ARRAY_SIZE for loops where possible
  documentation: hwmon: Fix typo in documentation/hwmon
  hwmon: (nct6775) Enable both AUXTIN and VIN3 on NCT6776
  hwmon: (ad7314) use spi_get_drvdata() and spi_set_drvdata()
  MAINTAINERS: Add myself as maintainer for the NCT6775 driver
  hwmon: (nct6775) Expand scope of supported chips
  hwmon: (gpio-fan) Use is_visible to determine if attributes should be created
  hwmon: (tmp401) Fix device detection for TMP411B and TMP411C
  hwmon: Add driver for LM95234
  hwmon: (tmp401) Add support for TMP431
  hwmon: (pmbus/lm25066) Add support for LM25056
  hwmon: (pmbus/lm25066) Refactor device specific coefficients
  ...

Pull pinctrl update from Linus Walleij:
 "These are the pinctrl changes for v3.10:

   - Patrice Chotard contributed a new configuration debugfs interface
     and reintroduced fine-grained locking into the core: instead of
     having a "big pinctrl lock" we have a per-controller lock and
     specialized locks for the global controller and pinctrl handle
     lists.

   - Haoijan Zhuang deleted all the PXA and MMP2 pinctrl drivers and
     replaced them with pinctrl-single (which is also used by other
     SoCs) so we are gaining consolidation.  The platform particulars
     now come in through the device tree.

   - Haoijan also added support for generic pin config into the
     pinctrl-single driver which is another big consolidation win.

   - Finally also GPIO ranges are now supported by the pinctrl-single
     driver.

   - Tomasz Figa contributed a new Samsung S3C pinctrl driver, bringing
     more of the older Samsung platforms under the pinctrl umbrella and
     out of arch/arm.

   - Maxime Ripard contributed new Allwinner A10/A13 drivers.

   - Sachin Kamat, Wei Yongjun and Axel Lin did a lot of cleanups."

* tag 'pinctrl-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (66 commits)
  pinctrl: move subsystem mutex to pinctrl_dev struct
  pinctrl/pinconfig: fix misplaced goto
  pinctrl: s3c64xx: Fix build error caused by undefined chained_irq_enter
  pinctrl/pinconfig: add debug interface
  pinctrl: abx500: fix issue when no pdata
  pinctrl: pinctrl-single: add missing double quote
  pinctrl: sunxi: Rename wemac functions to emac
  pinctrl: exynos5440: add gpio interrupt support
  pinctrl: exynos5440: fix probe failure due to missing pin-list in config nodes
  pinctrl: ab8505: Staticize some symbols
  pinctrl: ab8540: Staticize some symbols
  pinctrl: ab9540: Staticize some symbols
  pinctrl: ab8500: Staticize some symbols
  pinctrl: abx500: Staticize some symbols
  pinctrl: Add pinctrl-s3c64xx driver
  pinctrl: samsung: Handle banks with two configuration registers
  pinctrl: samsung: Remove hardcoded register offsets
  pinctrl: samsung: Split pin bank description into two structures
  pinctrl: samsung: Include pinctrl-exynos driver data conditionally
  pinctrl: samsung: Protect bank registers with a spinlock
  ...

Pull fbdev updates from Tomi Valkeinen:

 - use vm_iomap_memory() in various fb drivers to map the fb memory to
   userspace

 - Cleanups for the videomode and display_timing features

 - Updates to vt8500, wm8505 and auo-k190x fb drivers

* tag 'fbdev-for-3.10' of git://gitorious.org/linux-omap-dss2/linux: (36 commits)
  fbdev: fix check for fb_mmap's mmio availability
  fbdev: improve fb_mmap bounds checks
  fbdev/ps3fb: use vm_iomap_memory()
  fbdev/sgivwfb: use vm_iomap_memory()
  fbdev/vermillion: use vm_iomap_memory()
  fbdev/sa1100fb: use vm_iomap_memory()
  fbdev/fb-puv3: use vm_iomap_memory()
  fbdev/controlfb: use vm_iomap_memory()
  fbdev/omapfb: use vm_iomap_memory()
  video: vt8500: fix Kconfig for videomode
  video/s3c: move platform_data out of arch/arm
  video/exynos: remove unnecessary header inclusions
  drivers/video: fsl-diu-fb: add hardware cursor support
  drivers: video: use module_platform_driver_probe()
  ARM: OMAP: remove "config FB_OMAP_CONSISTENT_DMA_SIZE"
  video: wm8505fb: Convert to devm_ioremap_resource()
  AUO-K190x: Add resolutions for portrait displays
  AUO-K190x: add framebuffer rotation support
  AUO-K190x: add a 16bit truecolor mode
  AUO-K190x: make color handling more flexible
  ...

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v3.10 merge window:

  PCI device hotplug
   - Remove ACPI PCI subdrivers (Jiang Liu, Myron Stowe)
   - Make acpiphp builtin only, not modular (Jiang Liu)
   - Add acpiphp mutual exclusion (Jiang Liu)

  Power management
   - Skip "PME enabled/disabled" messages when not supported (Rafael
     Wysocki)
   - Fix fallback to PCI_D0 (Rafael Wysocki)

  Miscellaneous
   - Factor quirk_io_region (Yinghai Lu)
   - Cache MSI capability offsets & cleanup (Gavin Shan, Bjorn Helgaas)
   - Clean up EISA resource initialization and logging (Bjorn Helgaas)
   - Fix prototype warnings (Andy Shevchenko, Bjorn Helgaas)
   - MIPS: Initialize of_node before scanning bus (Gabor Juhos)
   - Fix pcibios_get_phb_of_node() declaration "weak" annotation (Gabor
     Juhos)
   - Add MSI INTX_DISABLE quirks for AR8161/AR8162/etc (Xiong Huang)
   - Fix aer_inject return values (Prarit Bhargava)
   - Remove PME/ACPI dependency (Andrew Murray)
   - Use shared PCI_BUS_NUM() and PCI_DEVID() (Shuah Khan)"

* tag 'pci-v3.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits)
  vfio-pci: Use cached MSI/MSI-X capabilities
  vfio-pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK
  PCI: Remove "extern" from function declarations
  PCI: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK
  PCI: Drop msi_mask_reg() and remove drivers/pci/msi.h
  PCI: Use msix_table_size() directly, drop multi_msix_capable()
  PCI: Drop msix_table_offset_reg() and msix_pba_offset_reg() macros
  PCI: Drop is_64bit_address() and is_mask_bit_support() macros
  PCI: Drop msi_data_reg() macro
  PCI: Drop msi_lower_address_reg() and msi_upper_address_reg() macros
  PCI: Drop msi_control_reg() macro and use PCI_MSI_FLAGS directly
  PCI: Use cached MSI/MSI-X offsets from dev, not from msi_desc
  PCI: Clean up MSI/MSI-X capability #defines
  PCI: Use cached MSI-X cap while enabling MSI-X
  PCI: Use cached MSI cap while enabling MSI interrupts
  PCI: Remove MSI/MSI-X cap check in pci_msi_check_device()
  PCI: Cache MSI/MSI-X capability offsets in struct pci_dev
  PCI: Use u8, not int, for PM capability offset
  [SCSI] megaraid_sas: Use correct #define for MSI-X capability
  PCI: Remove "extern" from function declarations
  ...

Pull ia64 fixes from Tony Luck:
 "Bundle of miscellaneous ia64 fixes for 3.10 merge window."

* tag 'please-pull-misc-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  Add size restriction to the kdump documentation
  Fix example error_injection_tool
  Fix build error for numa_clear_node() under IA64
  Fix initialization of CMCI/CMCP interrupts
  Change "select DMAR" to "select INTEL_IOMMU"
  Wrong asm register contraints in the kvm implementation
  Wrong asm register contraints in the futex implementation
  Remove cast for kmalloc return value
  Fix kexec oops when iosapic was removed
  iosapic: fix a minor typo in comments
  Add WB/UC check for early_ioremap
  Fix broken fsys_getppid()
  tiocx: check retval from bus_register()

Pull locking changes from Ingo Molnar:
 "The most noticeable change are mutex speedups from Waiman Long, for
  higher loads.  These scalability changes should be most noticeable on
  larger server systems.

  There are also cleanups, fixes and debuggability improvements."

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep: Consolidate bug messages into a single print_lockdep_off() function
  lockdep: Print out additional debugging advice when we hit lockdep BUGs
  mutex: Back out architecture specific check for negative mutex count
  mutex: Queue mutex spinners with MCS lock to reduce cacheline contention
  mutex: Make more scalable by doing less atomic operations
  mutex: Move mutex spinning code from sched/core.c back to mutex.c
  locking/rtmutex/tester: Set correct permissions on sysfs files
  lockdep: Remove unnecessary 'hlock_next' variable

Pull s390 update from Martin Schwidefsky:
 "This is the first batch of s390 patches for the 3.10 merge window.

  Included are some performance enhancements: storage key
  initialization, zero page cache synonyms, system call micro
  optimization and the speedup patches for dasdfmt.  Sebastian managed
  to get rid of the special casing for the console device in the cio
  layer.  And the usual bunch of bug fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (59 commits)
  s390/pci: use pci_scan_root_bus
  s390/scm_blk: fix memleak in init function
  s390/scm_blk: allow more cluster size values
  s390/cio: fix irq statistics
  s390/memory hotplug: prevent offline of active memory increments
  s390: remove small stack config option
  s390: system call path micro optimization
  s390: lowcore stack pointer offsets
  s390/uapi: change struct statfs[64] member types to unsigned values
  s390/pci: return correct dma address for offset > PAGE_SIZE
  s390/ptrace: remove empty ifdefs
  s390/compat: remove ptrace compat definitions from uapi header file
  s390/compat: fix compile error for !COMPAT
  s390/compat: fix compat_sys_statfs() memory corruption
  s390/zcore: Fix HSA copy length for last block
  s390/mm,gmap: segment mapping race
  s390/mm,gmap: implement gmap_translate()
  s390/pci: remove disable_device implementation
  s390/pci: disable per default
  s390/pci: return error after failed pci ops
  ...

Merge tag 'stable/for-linus-3.10-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen updates from Konrad Rzeszutek Wilk:
 "Features:
   - Populate the boot_params with EDD data.
   - Cleanups in the IRQ code.
  Bug-fixes:
   - CPU hotplug offline/online in PVHVM mode.
   - Re-upload processor PM data after ACPI S3 suspend/resume cycle."

And Konrad gets a gold star for sending the pull request early when he
thought he'd be away for the first week of the merge window (but because
of 3.9 dragging out to -rc8 he then re-sent the reminder on the first
day of the merge window anyway)

* tag 'stable/for-linus-3.10-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: resolve section mismatch warnings in xen-acpi-processor
  xen: Re-upload processor PM data to hypervisor after S3 resume (v2)
  xen/smp: Unifiy some of the PVs and PVHVM offline CPU path
  xen/smp/pvhvm: Don't initialize IRQ_WORKER as we are using the native one.
  xen/spinlock: Disable IRQ spinlock (PV) allocation on PVHVM
  xen/spinlock:  Check against default value of -1 for IRQ line.
  xen/time: Add default value of -1 for IRQ and check for that.
  xen/events: Check that IRQ value passed in is valid.
  xen/time: Fix kasprintf splat when allocating timer%d IRQ line.
  xen/smp/spinlock: Fix leakage of the spinlock interrupt line for every CPU online/offline
  xen/smp: Fix leakage of timer interrupt line for every CPU online/offline.
  xen kconfig: fix select INPUT_XEN_KBDDEV_FRONTEND
  xen: drop tracking of IRQ vector
  x86/xen: populate boot_params with EDD data

Since we will remove items off the list using list_del_init() we need
to use a safe version of the list_for_each_entry() macro aptly named
list_for_each_entry_safe().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>