- 03 Sep, 2024 5 commits
-
-
Roger Quadros authored
We are not using ndev->stats for rx_packets and rx_bytes anymore. Instead, we use per CPU stats which are collated in am65_cpsw_nuss_ndo_get_stats(). Fix RX statistics for XDP_TX and XDP_REDIRECT cases. Fixes: 8acacc40 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support") Signed-off-by:
Roger Quadros <rogerq@kernel.org> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Acked-by:
Julien Panis <jpanis@baylibre.com> Reviewed-by:
MD Danish Anwar <danishanwar@ti.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Roger Quadros authored
If number of TX queues are set to 1 we get a NULL pointer dereference during XDP_TX. ~# ethtool -L eth0 tx 1 ~# ./xdp-trafficgen udp -A <ipv6-src> -a <ipv6-dst> eth0 -t 2 Transmitting on eth0 (ifindex 2) [ 241.135257] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 Fix this by using actual TX queues instead of max TX queues when picking the TX channel in am65_cpsw_ndo_xdp_xmit(). Fixes: 8acacc40 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support") Signed-off-by:
-
Roger Quadros authored
The following XDP_DROP test from [1] stalls the interface after 250 packets. ~# xdb-bench drop -m native eth0 This is because new RX requests are never queued. Fix that. The below XDP_TX test from [1] fails with a warning [ 499.947381] XDP_WARN: xdp_update_frame_from_buff(line:277): Driver BUG: missing reserved tailroom ~# xdb-bench tx -m native eth0 Fix that by using PAGE_SIZE during xdp_init_buf(). In XDP_REDIRECT case only 1 packet was processed in rx_poll. Fix it to process up to budget packets. Fix all XDP error cases to call trace_xdp_exception() and drop the packet in am65_cpsw_run_xdp(). [1] xdp-tools suite https://github.com/xdp-project/xdp-tools Fixes: 8acacc40 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - qca: If memdump doesn't work, re-enable IBS - MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT - Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE" - MGMT: Ignore keys being loaded with invalid type * tag 'for-net-2024-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: MGMT: Ignore keys being loaded with invalid type Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE" Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT Bluetooth: hci_sync: Introduce hci_cmd_sync_run/hci_cmd_sync_run_once Bluetooth: qca: If memdump doesn't work, re-enable IBS ==================== Link: https://patch.msgid.link/20240830220300.1316772-1-luiz.dentz@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-6.11-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2024-08-30 The first patch is by Kuniyuki Iwashima for the CAN BCM protocol that adds a missing proc entry removal when a device unregistered. Simon Horman fixes the cleanup in the error cleanup path of the m_can driver's open function. Markus Schneider-Pargmann contributes 7 fixes for the m_can driver, all related to the recently added IRQ coalescing support. The next 2 patches are by me, target the mcp251xfd driver and fix ring and coalescing configuration problems when switching from CAN-CC to CAN-FD mode. Simon Arlott's patch fixes a possible deadlock in the mcp251x driver. The last patch is by Martin Jocic for the kvaser_pciefd driver and fixes a problem with lost IRQs, which result in starvation, under high load situations. * tag 'linux-can-fixes-for-6.11-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: kvaser_pciefd: Use a single write when releasing RX buffers can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open can: mcp251xfd: mcp251xfd_ring_init(): check TX-coalescing configuration can: mcp251xfd: fix ring configuration when switching from CAN-CC to CAN-FD mode can: m_can: Limit coalescing to peripheral instances can: m_can: Reset cached active_interrupts on start can: m_can: disable_all_interrupts, not clear active_interrupts can: m_can: Do not cancel timer from within timer can: m_can: Remove m_can_rx_peripheral indirection can: m_can: Remove coalesing disable in isr during suspend can: m_can: Reset coalescing during suspend/resume can: m_can: Release irq on error in m_can_open can: bcm: Remove proc entry when dev is unregistered. ==================== Link: https://patch.msgid.link/20240830215914.1610393-1-mkl@pengutronix.deSigned-off-by:
-
- 02 Sep, 2024 2 commits
-
-
Dan Carpenter authored
Call rtnl_unlock() on this error path, before returning. Fixes: bc23aa94 ("igc: Add pcie error handler support") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jens Emil Schulz Østergaard authored
This is a clear use-after-free error. We remove it, and rely on checking the return code of vcap_del_rule. Reported-by:
Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/kernel-janitors/7bffefc6-219a-4f71-baa0-ad4526e5c198@kili.mountain/ Fixes: c956b9b3 ("net: microchip: sparx5: Adding KUNIT tests of key/action values in VCAP API") Signed-off-by:
Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com> Signed-off-by:
-
- 01 Sep, 2024 3 commits
-
-
David S. Miller authored
Matt Johnston says: ==================== net: mctp-serial: Fix for missing tx escapes The mctp-serial code to add escape characters was incorrect due to an off-by-one error. This series adds a test for the chunking which splits by escape characters, and fixes the bug. v2: Fix kunit param const pointer ==================== Signed-off-by: -
Matt Johnston authored
0x7d and 0x7e bytes are meant to be escaped in the data portion of frames, but this didn't occur since next_chunk_len() had an off-by-one error. That also resulted in the final byte of a payload being written as a separate tty write op. The chunk prior to an escaped byte would be one byte short, and the next call would never test the txpos+1 case, which is where the escaped byte was located. That meant it never hit the escaping case in mctp_serial_tx_work(). Example Input: 01 00 08 c8 7e 80 02 Previous incorrect chunks from next_chunk_len(): 01 00 08 c8 7e 80 02 With this fix: 01 00 08 c8 7e 80 02 Cc: stable@vger.kernel.org Fixes: a0c2ccd9 ("mctp: Add MCTP-over-serial transport binding") Signed-off-by:
Matt Johnston <matt@codeconstruct.com.au> Signed-off-by:
-
Matt Johnston authored
Test various edge cases of inputs that contain characters that need escaping. This adds a new kunit suite for mctp-serial. Signed-off-by:
-
- 30 Aug, 2024 9 commits
-
-
Luiz Augusto von Dentz authored
Due to 59b047bc there could be keys stored with the wrong address type so this attempt to detect it and ignore them instead of just failing to load all keys. Cc: stable@vger.kernel.org Link: https://github.com/bluez/bluez/issues/875 Fixes: 59b047bc ("Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE") Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Luiz Augusto von Dentz authored
This reverts commit 59b047bc which breaks compatibility with commands like: bluetoothd[46328]: @ MGMT Command: Load.. (0x0013) plen 74 {0x0001} [hci0] Keys: 2 BR/EDR Address: C0:DC:DA:A5:E5:47 (Samsung Electronics Co.,Ltd) Key type: Authenticated key from P-256 (0x03) Central: 0x00 Encryption size: 16 Diversifier[2]: 0000 Randomizer[8]: 0000000000000000 Key[16]: 6ed96089bd9765be2f2c971b0b95f624 LE Address: D7:2A:DE:1E:73:A2 (Static) Key type: Unauthenticated key from P-256 (0x02) Central: 0x00 Encryption size: 16 Diversifier[2]: 0000 Randomizer[8]: 0000000000000000 Key[16]: 87dd2546ededda380ffcdc0a8faa4597 @ MGMT Event: Command Status (0x0002) plen 3 {0x0001} [hci0] Load Long Term Keys (0x0013) Status: Invalid Parameters (0x0d) Cc: stable@vger.kernel.org Link: https://github.com/bluez/bluez/issues/875 Fixes: 59b047bc ("Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE") Signed-off-by:
-
Luiz Augusto von Dentz authored
MGMT_OP_DISCONNECT can be called while mgmt_device_connected has not been called yet, which will cause the connection procedure to be aborted, so mgmt_device_disconnected shall still respond with command complete to MGMT_OP_DISCONNECT and just not emit MGMT_EV_DEVICE_DISCONNECTED since MGMT_EV_DEVICE_CONNECTED was never sent. To fix this MGMT_OP_DISCONNECT is changed to work similarly to other command which do use hci_cmd_sync_queue and then use hci_conn_abort to disconnect and returns the result, in order for hci_conn_abort to be used from hci_cmd_sync context it now uses hci_cmd_sync_run_once. Link: https://github.com/bluez/bluez/issues/932 Fixes: 12d4a3b2 ("Bluetooth: Move check for MGMT_CONNECTED flag into mgmt.c") Signed-off-by:
-
Luiz Augusto von Dentz authored
This introduces hci_cmd_sync_run/hci_cmd_sync_run_once which acts like hci_cmd_sync_queue/hci_cmd_sync_queue_once but runs immediately when already on hdev->cmd_sync_work context. Signed-off-by: -
Douglas Anderson authored
On systems in the field, we are seeing this sometimes in the kernel logs: Bluetooth: qca_controller_memdump() hci0: hci_devcd_init Return:-95 This means that _something_ decided that it wanted to get a memdump but then hci_devcd_init() returned -EOPNOTSUPP (AKA -95). The cleanup code in qca_controller_memdump() when we get back an error from hci_devcd_init() undoes most things but forgets to clear QCA_IBS_DISABLED. One side effect of this is that, during the next suspend, qca_suspend() will always get a timeout. Let's fix it so that we clear the bit. Fixes: 06d3fdfc ("Bluetooth: hci_qca: Add qcom devcoredump support") Reviewed-by:
Guenter Roeck <groeck@chromium.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Martin Jocic authored
Kvaser's PCIe cards uses the KCAN FPGA IP block which has dual 4K buffers for incoming messages shared by all (currently up to eight) channels. While the driver processes messages in one buffer, new incoming messages are stored in the other and so on. The design of KCAN is such that a buffer must be fully read and then released. Releasing a buffer will make the FPGA switch buffers. If the other buffer contains at least one incoming message the FPGA will also instantly issue a new interrupt, if not the interrupt will be issued after receiving the first new message. With IRQx interrupts, it takes a little time for the interrupt to happen, enough for any previous ISR call to do it's business and return, but MSI interrupts are way faster so this time is reduced to almost nothing. So with MSI, releasing the buffer HAS to be the very last action of the ISR before returning, otherwise the new interrupt might be "masked" by the kernel because the previous ISR call hasn't returned. And the interrupts are edge-triggered so we cannot loose one, or the ping-pong reading process will stop. This is why this patch modifies the driver to use a single write to the SRB_CMD register before returning. Signed-off-by:
Martin Jocic <martin.jocic@kvaser.com> Reviewed-by:
Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20240830153113.2081440-1-martin.jocic@kvaser.com Fixes: 26ad340e ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Cong Wang authored
When we cork messages in psock->cork, the last message triggers the flushing will result in sending a sk_msg larger than the current message size. In this case, in tcp_bpf_send_verdict(), 'copied' becomes negative at least in the following case: 468 case __SK_DROP: 469 default: 470 sk_msg_free_partial(sk, msg, tosend); 471 sk_msg_apply_bytes(psock, tosend); 472 *copied -= (tosend + delta); // <==== HERE 473 return -EACCES; Therefore, it could lead to the following BUG with a proper value of 'copied' (thanks to syzbot). We should not use negative 'copied' as a return value here. ------------[ cut here ]------------ kernel BUG at net/socket.c:733! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 UID: 0 PID: 3265 Comm: syz-executor510 Not tainted 6.11.0-rc3-syzkaller-00060-gd07b4328 #0 Hardware name: linux,dummy-virt (DT) pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : sock_sendmsg_nosec net/socket.c:733 [inline] pc : sock_sendmsg_nosec net/socket.c:728 [inline] pc : __sock_sendmsg+0x5c/0x60 net/socket.c:745 lr : sock_sendmsg_nosec net/socket.c:730 [inline] lr : __sock_sendmsg+0x54/0x60 net/socket.c:745 sp : ffff800088ea3b30 x29: ffff800088ea3b30 x28: fbf00000062bc900 x27: 0000000000000000 x26: ffff800088ea3bc0 x25: ffff800088ea3bc0 x24: 0000000000000000 x23: f9f00000048dc000 x22: 0000000000000000 x21: ffff800088ea3d90 x20: f9f00000048dc000 x19: ffff800088ea3d90 x18: 0000000000000001 x17: 0000000000000000 x16: 0000000000000000 x15: 000000002002ffaf x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: ffff8000815849c0 x9 : ffff8000815b49c0 x8 : 0000000000000000 x7 : 000000000000003f x6 : 0000000000000000 x5 : 00000000000007e0 x4 : fff07ffffd239000 x3 : fbf00000062bc900 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 00000000fffffdef Call trace: sock_sendmsg_nosec net/socket.c:733 [inline] __sock_sendmsg+0x5c/0x60 net/socket.c:745 ____sys_sendmsg+0x274/0x2ac net/socket.c:2597 ___sys_sendmsg+0xac/0x100 net/socket.c:2651 __sys_sendmsg+0x84/0xe0 net/socket.c:2680 __do_sys_sendmsg net/socket.c:2689 [inline] __se_sys_sendmsg net/socket.c:2687 [inline] __arm64_sys_sendmsg+0x24/0x30 net/socket.c:2687 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x48/0x110 arch/arm64/kernel/syscall.c:49 el0_svc_common.constprop.0+0x40/0xe0 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x1c/0x28 arch/arm64/kernel/syscall.c:151 el0_svc+0x34/0xec arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x100/0x12c arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x19c/0x1a0 arch/arm64/kernel/entry.S:598 Code: f9404463 d63f0060 3108441f 54fffe81 (d4210000) ---[ end trace 0000000000000000 ]--- Fixes: 4f738adb ("bpf: create tcp_bpf_ulp allowing BPF to monitor socket TX/RX data") Reported-by: syzbot+58c03971700330ce14d8@syzkaller.appspotmail.com Cc: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
Cong Wang <cong.wang@bytedance.com> Reviewed-by:
John Fastabend <john.fastabend@gmail.com> Acked-by:
Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/20240821030744.320934-1-xiyou.wangcong@gmail.comSigned-off-by:
-
Jeongjun Park authored
Since smc_inet6_prot does not initialize ipv6_pinfo_offset, inet6_create() copies an incorrect address value, sk + 0 (offset), to inet_sk(sk)->pinet6. In addition, since inet_sk(sk)->pinet6 and smc_sk(sk)->clcsock practically point to the same address, when smc_create_clcsk() stores the newly created clcsock in smc_sk(sk)->clcsock, inet_sk(sk)->pinet6 is corrupted into clcsock. This causes NULL pointer dereference and various other memory corruptions. To solve this problem, you need to initialize ipv6_pinfo_offset, add a smc6_sock structure, and then add ipv6_pinfo as the second member of the smc_sock structure. Reported-by:
syzkaller <syzkaller@googlegroups.com> Fixes: d25a92cc ("net/smc: Introduce IPPROTO_SMC") Signed-off-by:
Jeongjun Park <aha310510@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-08-28 (igb, ice) This series contains updates to igb and ice drivers. Daiwei Li restores writing the TSICR (TimeSync Interrupt Cause) register on 82850 devices to workaround a hardware issue for igb. Dawid detaches netdev device for reset to avoid ethtool accesses during reset causing NULL pointer dereferences on ice. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Add netif_device_attach/detach into PF reset flow igb: Fix not clearing TimeSync interrupts for 82580 ==================== Link: https://patch.msgid.link/20240828225444.645154-1-anthony.l.nguyen@intel.comSigned-off-by:
-
- 29 Aug, 2024 21 commits
-
-
Jakub Kicinski authored
We exclude wireless drivers from the netdev@ traffic, to delegate it to linux-wireless@, and avoid overwhelming netdev@. Bluetooth drivers are implicitly excluded because they live under drivers/bluetooth, not drivers/net. In both cases DT bindings sit under Documentation/devicetree/bindings/net/ and aren't excluded. So if a patch series touches DT bindings netdev@ ends up getting CCed, and these are usually fairly boring series. Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240828175821.2960423-1-kuba@kernel.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from bluetooth, wireless and netfilter. No known outstanding regressions. Current release - regressions: - wifi: iwlwifi: fix hibernation - eth: ionic: prevent tx_timeout due to frequent doorbell ringing Previous releases - regressions: - sched: fix sch_fq incorrect behavior for small weights - wifi: - iwlwifi: take the mutex before running link selection - wfx: repair open network AP mode - netfilter: restore IP sanity checks for netdev/egress - tcp: fix forever orphan socket caused by tcp_abort - mptcp: close subflow when receiving TCP+FIN - bluetooth: fix random crash seen while removing btnxpuart driver Previous releases - always broken: - mptcp: more fixes for the in-kernel PM - eth: bonding: change ipsec_lock from spin lock to mutex - eth: mana: fix race of mana_hwc_post_rx_wqe and new hwc response Misc: - documentation: drop special comment style for net code" * tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits) nfc: pn533: Add poll mod list filling check mailmap: update entry for Sriram Yagnaraman selftests: mptcp: join: check re-re-adding ID 0 signal mptcp: pm: ADD_ADDR 0 is not a new address selftests: mptcp: join: validate event numbers mptcp: avoid duplicated SUB_CLOSED events selftests: mptcp: join: check re-re-adding ID 0 endp mptcp: pm: fix ID 0 endp usage after multiple re-creations mptcp: pm: do not remove already closed subflows selftests: mptcp: join: no extra msg if no counter selftests: mptcp: join: check re-adding init endp with != id mptcp: pm: reset MPC endp ID when re-added mptcp: pm: skip connecting to already established sf mptcp: pm: send ACK on an active subflow selftests: mptcp: join: check removing ID 0 endpoint mptcp: pm: fix RM_ADDR ID for the initial subflow mptcp: pm: reuse ID 0 after delete and re-add net: busy-poll: use ktime_get_ns() instead of local_clock() sctp: fix association labeling in the duplicate COOKIE-ECHO case mptcp: pr_debug: add missing \n at the end ... -
Aleksandr Mishin authored
In case of im_protocols value is 1 and tm_protocols value is 0 this combination successfully passes the check 'if (!im_protocols && !tm_protocols)' in the nfc_start_poll(). But then after pn533_poll_create_mod_list() call in pn533_start_poll() poll mod list will remain empty and dev->poll_mod_count will remain 0 which lead to division by zero. Normally no im protocol has value 1 in the mask, so this combination is not expected by driver. But these protocol values actually come from userspace via Netlink interface (NFC_CMD_START_POLL operation). So a broken or malicious program may pass a message containing a "bad" combination of protocol parameter values so that dev->poll_mod_count is not incremented inside pn533_poll_create_mod_list(), thus leading to division by zero. Call trace looks like: nfc_genl_start_poll() nfc_start_poll() ->start_poll() pn533_start_poll() Add poll mod list filling check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: dfccd0f5 ("NFC: pn533: Add some polling entropy") Signed-off-by:Aleksandr Mishin <amishin@t-argos.ru> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240827084822.18785-1-amishin@t-argos.ruSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 sets on NFT_PKTINFO_L4PROTO for UDP packets less than 4 bytes payload from netdev/egress by subtracting skb_network_offset() when validating IPv4 packet length, otherwise 'meta l4proto udp' never matches. Patch #2 subtracts skb_network_offset() when validating IPv6 packet length for netdev/egress. netfilter pull request 24-08-28 * tag 'nf-24-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables_ipv6: consider network offset in netdev/egress validation netfilter: nf_tables: restore IP sanity checks for netdev/egress ==================== Link: https://patch.msgid.link/20240828214708.619261-1-pablo@netfilter.orgSigned-off-by:
-
Sriram Yagnaraman authored
Link my old est.tech address to my active mail address Signed-off-by:
Sriram Yagnaraman <sriram.yagnaraman@ericsson.com> Reviewed-by:
Kurt Kanzenbach <kurt@linutronix.de> Link: https://patch.msgid.link/20240828072417.4111996-1-sriram.yagnaraman@ericsson.comSigned-off-by:
-
Paolo Abeni authored
Matthieu Baerts says: ==================== mptcp: more fixes for the in-kernel PM Here is a new batch of fixes for the MPTCP in-kernel path-manager: Patch 1 ensures the address ID is set to 0 when the path-manager sends an ADD_ADDR for the address of the initial subflow. The same fix is applied when a new subflow is created re-using this special address. A fix for v6.0. Patch 2 is similar, but for the case where an endpoint is removed: if this endpoint was used for the initial address, it is important to send a RM_ADDR with this ID set to 0, and look for existing subflows with the ID set to 0. A fix for v6.0 as well. Patch 3 validates the two previous patches. Patch 4 makes the PM selecting an "active" path to send an address notification in an ACK, instead of taking the first path in the list. A fix for v5.11. Patch 5 fixes skipping the establishment of a new subflow if a previous subflow using the same pair of addresses is being closed. A fix for v5.13. Patch 6 resets the ID linked to the initial subflow when the linked endpoint is re-added, possibly with a different ID. A fix for v6.0. Patch 7 validates the three previous patches. Patch 8 is a small fix for the MPTCP Join selftest, when being used with older subflows not supporting all MIB counters. A fix for a commit introduced in v6.4, but backported up to v5.10. Patch 9 avoids the PM to try to close the initial subflow multiple times, and increment counters while nothing happened. A fix for v5.10. Patch 10 stops incrementing local_addr_used and add_addr_accepted counters when dealing with the address ID 0, because these counters are not taking into account the initial subflow, and are then not decremented when the linked addresses are removed. A fix for v6.0. Patch 11 validates the previous patch. Patch 12 avoids the PM to send multiple SUB_CLOSED events for the initial subflow. A fix for v5.12. Patch 13 validates the previous patch. Patch 14 stops treating the ADD_ADDR 0 as a new address, and accepts it in order to re-create the initial subflow if it has been closed, even if the limit for *new* addresses -- not taking into account the address of the initial subflow -- has been reached. A fix for v5.10. Patch 15 validates the previous patch. Signed-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> --- Matthieu Baerts (NGI0) (15): mptcp: pm: reuse ID 0 after delete and re-add mptcp: pm: fix RM_ADDR ID for the initial subflow selftests: mptcp: join: check removing ID 0 endpoint mptcp: pm: send ACK on an active subflow mptcp: pm: skip connecting to already established sf mptcp: pm: reset MPC endp ID when re-added selftests: mptcp: join: check re-adding init endp with != id selftests: mptcp: join: no extra msg if no counter mptcp: pm: do not remove already closed subflows mptcp: pm: fix ID 0 endp usage after multiple re-creations selftests: mptcp: join: check re-re-adding ID 0 endp mptcp: avoid duplicated SUB_CLOSED events selftests: mptcp: join: validate event numbers mptcp: pm: ADD_ADDR 0 is not a new address selftests: mptcp: join: check re-re-adding ID 0 signal net/mptcp/pm.c | 4 +- net/mptcp/pm_netlink.c | 87 ++++++++++---- net/mptcp/protocol.c | 6 + net/mptcp/protocol.h | 5 +- tools/testing/selftests/net/mptcp/mptcp_join.sh | 153 ++++++++++++++++++++---- tools/testing/selftests/net/mptcp/mptcp_lib.sh | 4 + 6 files changed, 209 insertions(+), 50 deletions(-) --- base-commit: 3a0504d5 change-id: 20240826-net-mptcp-more-pm-fix-ffa61a36f817 Best regards, ==================== Link: https://patch.msgid.link/20240828-net-mptcp-more-pm-fix-v2-0-7f11b283fff7@kernel.orgSigned-off-by:
-
Matthieu Baerts (NGI0) authored
This test extends "delete re-add signal" to validate the previous commit: when the 'signal' endpoint linked to the initial subflow (ID 0) is re-added multiple times, it will re-send the ADD_ADDR with id 0. The client should still be able to re-create this subflow, even if the add_addr_accepted limit has been reached as this special address is not considered as a new address. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: d0876b22 ("mptcp: add the incoming RM_ADDR support") Cc: stable@vger.kernel.org Reviewed-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
-
Matthieu Baerts (NGI0) authored
The ADD_ADDR 0 with the address from the initial subflow should not be considered as a new address: this is not something new. If the host receives it, it simply means that the address is available again. When receiving an ADD_ADDR for the ID 0, the PM already doesn't consider it as new by not incrementing the 'add_addr_accepted' counter. But the 'accept_addr' might not be set if the limit has already been reached: this can be bypassed in this case. But before, it is important to check that this ADD_ADDR for the ID 0 is for the same address as the initial subflow. If not, it is not something that should happen, and the ADD_ADDR can be ignored. Note that if an ADD_ADDR is received while there is already a subflow opened using the same address, this ADD_ADDR is ignored as well. It means that if multiple ADD_ADDR for ID 0 are received, there will not be any duplicated subflows created by the client. Fixes: d0876b22 ("mptcp: add the incoming RM_ADDR support") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
This test extends "delete and re-add" and "delete re-add signal" to validate the previous commit: the number of MPTCP events are checked to make sure there are no duplicated or unexpected ones. A new helper has been introduced to easily check these events. The missing events have been added to the lib. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: b911c97c ("mptcp: add netlink event support") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
The initial subflow might have already been closed, but still in the connection list. When the worker is instructed to close the subflows that have been marked as closed, it might then try to close the initial subflow again. A consequence of that is that the SUB_CLOSED event can be seen twice: # ip mptcp endpoint 1.1.1.1 id 1 subflow dev eth0 2.2.2.2 id 2 subflow dev eth1 # ip mptcp monitor & [ CREATED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9 [ ESTABLISHED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9 [ SF_ESTABLISHED] remid=0 locid=2 saddr4=2.2.2.2 daddr4=9.9.9.9 # ip mptcp endpoint delete id 1 [ SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9 [ SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9 The first one is coming from mptcp_pm_nl_rm_subflow_received(), and the second one from __mptcp_close_subflow(). To avoid doing the post-closed processing twice, the subflow is now marked as closed the first time. Note that it is not enough to check if we are dealing with the first subflow and check its sk_state: the subflow might have been reset or closed before calling mptcp_close_ssk(). Fixes: b911c97c ("mptcp: add netlink event support") Cc: stable@vger.kernel.org Tested-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by:
-
Matthieu Baerts (NGI0) authored
This test extends "delete and re-add" to validate the previous commit: when the endpoint linked to the initial subflow (ID 0) is re-added multiple times, it was no longer being used, because the internal linked counters are not decremented for this special endpoint: it is not an additional endpoint. Here, the "del/add id 0" steps are done 3 times to unsure this case is validated. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
'local_addr_used' and 'add_addr_accepted' are decremented for addresses not related to the initial subflow (ID0), because the source and destination addresses of the initial subflows are known from the beginning: they don't count as "additional local address being used" or "ADD_ADDR being accepted". It is then required not to increment them when the entrypoint used by the initial subflow is removed and re-added during a connection. Without this modification, this entrypoint cannot be removed and re-added more than once. Reported-by:
-
Matthieu Baerts (NGI0) authored
It is possible to have in the list already closed subflows, e.g. the initial subflow has been already closed, but still in the list. No need to try to close it again, and increments the related counters again. Fixes: 0ee4261a ("mptcp: implement mptcp_pm_remove_subflow") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
The checksum and fail counters might not be available. Then no need to display an extra message with missing info. While at it, fix the indentation around, which is wrong since the same commit. Fixes: 47867f0a ("selftests: mptcp: join: skip check if MIB counter not supported") Cc: stable@vger.kernel.org Reviewed-by:
Geliang Tang <geliang@kernel.org> Signed-off-by:
-
Matthieu Baerts (NGI0) authored
The initial subflow has a special local ID: 0. It is specific per connection. When a global endpoint is deleted and re-added later, it can have a different ID, but the kernel should still use the ID 0 if it corresponds to the initial address. This test validates this behaviour: the endpoint linked to the initial subflow is removed, and re-added with a different ID. Note that removing the initial subflow will not decrement the 'subflows' counters, which corresponds to the *additional* subflows. On the other hand, when the same endpoint is re-added, it will increment this counter, as it will be seen as an additional subflow this time. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
The initial subflow has a special local ID: 0. It is specific per connection. When a global endpoint is deleted and re-added later, it can have a different ID -- most services managing the endpoints automatically don't force the ID to be the same as before. It is then important to track these modifications to be consistent with the ID being used for the address used by the initial subflow, not to confuse the other peer or to send the ID 0 for the wrong address. Now when removing an endpoint, msk->mpc_endpoint_id is reset if it corresponds to this endpoint. When adding a new endpoint, the same variable is updated if the address match the one of the initial subflow. Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
The lookup_subflow_by_daddr() helper checks if there is already a subflow connected to this address. But there could be a subflow that is closing, but taking time due to some reasons: latency, losses, data to process, etc. If an ADD_ADDR is received while the endpoint is being closed, it is better to try connecting to it, instead of rejecting it: the peer which has sent the ADD_ADDR will not be notified that the ADD_ADDR has been rejected for this reason, and the expected subflow will not be created at the end. This helper should then only look for subflows that are established, or going to be, but not the ones being closed. Fixes: d84ad049 ("mptcp: skip connecting the connected address") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
Taking the first one on the list doesn't work in some cases, e.g. if the initial subflow is being removed. Pick another one instead of not sending anything. Fixes: 84dfe367 ("mptcp: send out dedicated ADD_ADDR packet") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
Removing the endpoint linked to the initial subflow should trigger a RM_ADDR for the right ID, and the removal of the subflow. That's what is now being verified in the "delete and re-add" test. Note that removing the initial subflow will not decrement the 'subflows' counters, which corresponds to the *additional* subflows. On the other hand, when the same endpoint is re-added, it will increment this counter, as it will be seen as an additional subflow this time. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
The initial subflow has a special local ID: 0. When an endpoint is being deleted, it is then important to check if its address is not linked to the initial subflow to send the right ID. If there was an endpoint linked to the initial subflow, msk's mpc_endpoint_id field will be set. We can then use this info when an endpoint is being removed to see if it is linked to the initial subflow. So now, the correct IDs are passed to mptcp_pm_nl_rm_addr_or_subflow(), it is no longer needed to use mptcp_local_id_match(). Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
When the endpoint used by the initial subflow is removed and re-added later, the PM has to force the ID 0, it is a special case imposed by the MPTCP specs. Note that the endpoint should then need to be re-added reusing the same ID. Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by:
-
