Propogate change from drivers/ide
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Force irq migration path during cpu offline, is not using proper locks and
irq_chip mask/unmask routines.  This will result in some races(especially
the device generating the interrupt can see some inconsistent state,
resulting in issues like stuck irq,..).

Appended patch fixes the issue by taking proper lock and encapsulating
irq_chip set_affinity() with a mask() before and an unmask() after.

This fixes a MSI irq stuck issue reported by Darrick Wong.

There are several more general bugs in this area(irq migration in the
process context). For example,

 1. Possibility of missing edge triggered irq.
 2. Reliable method of migrating level triggered irq in the process context.

We plan to look and close these in the near future.

Eric says:
	In addition even with the fix from Suresh there is still at least one
	nasty hardware race in fixup_irqs().   However we exercise that code
	path rarely enough that we are unlikely to hit it in the real world,
	and that race seems to have existed since the code was merged.  And a
	fix for that is not coming soon as it is an open investigation area
	if we can fix irq migration to work outside of irq context or if
	we have to rework the requirements imposed by the generic cpu hotplug
	and layer on fixup_irqs().  So this may come up again.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Reported-and-tested-by: Darrick Wong <djwong@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

set the irq_chip name for lapic.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 4449/1: more entries in arch/arm/boot/.gitignore
  [ARM] 4452/1: Force the literal pool dump before reloc_end
  [ARM] Update show_regs/oops register format
  [ARM] Add support for pause_on_oops and display preempt/smp options

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Count timer interrupts correctly.
  [MIPS] SMTC and non-SMTC kernel and modules are incompatible
  [MIPS] EMMA2RH: Disable GEN_RTC, it can't possibly work.
  [MIPS] Remove a duplicated local variable in test_and_clear_bit()
  [MIPS] use compat_siginfo in rt_sigframe_n32
  [MIPS] 20K: Handle WAIT related bugs according to errata information
  [MIPS] AP/SP requires shadow registers, auto enable support.
  [MIPS] Fix pb1500 reg B access
  [MIPS] Alchemy: Fix wrong cast
  [MIPS] remove "support for" from system type entry
  [MIPS] add io_map_base to pci_controller on Cobalt
  [MIPS] __ucmpdi2 arguments are unsigned long long.

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fix subtle FP state corruption bug in signal return on SMP
  [POWERPC] Fix VDSO gettimeofday() when called with NULL struct timeval
  [POWERPC] Update defconfigs
  [POWERPC] Update g5_defconfig

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: ftdio_sio: New IPlus device ID
  USB: add new device id to option driver
  USB: fix race leading to use after free in io_edgeport
  USB: usblcd doesn't limit memory consumption during write
  USB: memory leak in iowarrior.c
  USB: ti serial driver sleeps with spinlock held
  USB: g_file_storage: call allow_signal()

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

So don't allow mixing.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Neither rtc_mips_get_time nor rtc_mips_set_time are being initialized by
the EMMA2RH setup code, so genrtc at best was a RTC dummy avoiding a few
error messages but not providing actual functionality.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Fix a sparse warning caused by 2c921d07f8c641e691b0dfd80a5cfe14c60ec489

include2/asm/bitops.h:313:23: warning: symbol 'res' shadows an earlier one
include2/asm/bitops.h:309:16: originally declared here
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Pavel Kiryukhin <vksavl@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

We used to avoid the WAIT entirely on the 20K but really only need to do
this on early revs of the 20K.  Without this a 20K was a bit of a
power hog.  Well, in the lower power power hog category ;-)
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Noticed by Chris Dearman (chris@mips.com).
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

au_readl() is correct here.
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Reported by Eugene Surovegin <ebs@ebshome.net>.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Reported by Grzegorz Chimosz <gchimi@gmail.com>
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Cc: Matthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

usb_unlink_urb() is asynchronous, therefore an URB's buffer may not
be freed without waiting for the completion handler. This patch switches
to usb_kill_urb(), which is synchronous.
Thanks to Alan for making me look at the remaining users of usb_unlink_urb()
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Al Borchers <alborchers@steinerpoint.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

usblcd currently has no way to limit memory consumption by fast writers.
This is a security problem, as it allows users with write access to this
device to drive the system into oom despite resource limits.
Here's the fix taken from the modern skeleton driver.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

this is a classical memory leak in the ioctl handler. The buffer is simply
never freed. This fixes it the obvious way.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

you are submitting an URB with GFP_KERNEL holding a spinlock.
In this case the spinlock can be dropped earlier.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Cc: Al Borchers <alborchers@steinerpoint.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

New changes in the signal-handling code require compensating changes
in g_file_storage.  This patch (as913) by Oleg Nesterov makes the
code use allow_signal() instead of sigprocmask().

From: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This fixes a bug which can cause corruption of the floating-point state
on return from a signal handler.  If we have a signal handler that has
used the floating-point registers, and it happens to context-switch to
another task while copying the interrupted floating-point state from the
user stack into the thread struct (e.g. because of a page fault, or
because it gets preempted), the context switch code will think that the
FP registers contain valid FP state that needs to be copied into the
thread_struct, and will thus overwrite the values that the signal return
code has put into the thread_struct.

This can occur because we clear the MSR bits that indicate the presence
of valid FP state after copying the state into the thread_struct.  To fix
this we just move the clearing of the MSR bits to before the copy.  A
similar potential problem also occurs with the Altivec state, and this
fixes that in the same way.
Signed-off-by: Paul Mackerras <paulus@samba.org>

Consider the prototype for gettimeofday():
	int gettimofday(struct timeval *tv, struct timezone *tz);

Although it is valid to call with /either/ tv or tz being NULL, and
the C version of sys_gettimeofday() supports this, the current version
of gettimeofday() in the VDSO will SEGV if called with a NULL tv.

This adds a check for tv being NULL so that it doesn't SEGV.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Signed-off-by: Paul Mackerras <paulus@samba.org>

Update the g5_defconfig with default settings.
This is to keep things up to date, and specifically to ensure that the
CONFIG_MACINTOSH_DRIVERS option is enabled.  This also turns on
CONFIG_MSI.
Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
cc: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

wrmsrl() is broken, dropping the upper 32bits of the value to be
written. This broke the NMI watchdog on AMD hardware. (and it
probably broke other code too.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Nicolas Pitre <npitre@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

In the arch/arm/boot/compressed/head.S file, the contents of the
literal pool accumulated during the relocatable code must be dumped
before reloc_end.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The return value of futex_find_get_task() needs to be -ESRCH in case
that the search fails.  This was part of the original futex fixes and
got accidentally dropped, when the futex-tidy-up patch was split out.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Stable Team <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NET]: Make skb_seq_read unmap the last fragment
  [NET]: Re-enable irqs before pushing pending DMA requests
  [TCP] tcp_read_sock: Allow recv_actor() return return negative error value.
  [PPP]: Fix osize too small errors when decoding mppe.
  [PPP]: Revert 606f585e
  [TIPC]: Fix infinite loop in netlink handler
  [SKBUFF]: Fix incorrect config #ifdef around skb_copy_secmark
  [IPV4]: include sysctl.h from inetdevice.h
  [IPV6] NDISC: Fix thinko to control Router Preference support.
  [NETFILTER]: nfctnetlink: Don't allow to change helper
  [NETFILTER]: nf_conntrack_sip: add missing message types containing RTP info

Register %ebx serves as the "global offset table base register" for
position-independent code.  For absolute code, %ebx serves as a local
register and has no specified role in the function calling sequence.  In
either case, a function must preserve the register value for the caller.

acpi_copy_wakeup_routine overrides %ebx without saving it, this may corrupt
the called data.

Kevin found that most time the value of Sx is saved in %esi, however
sometimes compiler also uses %ebx.  When this happens, suspends fails since
sleep value in ebx is changed by acpi_copy_wakeup_routine.

The same funtion in X86_64 doesn't have this problem.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Looks-okay-to: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

One of error path in ext4_read_inode() leaks bh since brelse is forgoten.
Signed-off-by: Kirill Korotaev <dev@openvz.org>
Acked-by: Vasily Averin <vvs@sw.ru>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

One of error path in ext3_read_inode() leaks bh since brelse is forgoten.
Signed-off-by: Kirill Korotaev <dev@openvz.org>
Acked-by: Vasily Averin <vvs@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Removing a watched file will oops if audit is disabled (auditctl -e 0).

To reproduce:
- auditctl -e 1
- touch /tmp/foo
- auditctl -w /tmp/foo
- auditctl -e 0
- rm /tmp/foo (or mv)
Signed-off-by: Tony Jones <tonyj@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>