- 13 May, 2022 40 commits
-
-
Hans Verkuil authored
Fix smatch warning: drivers/media/i2c/s5k6a3.c:234 __s5k6a3_power_on() warn: 'sensor->clock' from clk_prepare_enable() not released on lines: 234. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Hans Verkuil authored
Fixes smatch warning: drivers/media/i2c/ccs/ccs-core.c:1676 ccs_power_on() warn: 'sensor->ext_clk' from clk_prepare_enable() not released on lines: 1606. Signed-off-by:
-
Hans Verkuil authored
Fixes smatch warning: drivers/media/pci/cx25821/cx25821-alsa.c:768 cx25821_audio_initdev() warn: 'dev->pci->irq' from request_irq() not released on lines: 768. Signed-off-by:
-
Hans Verkuil authored
Fixes smatch warning: drivers/media/common/videobuf2/videobuf2-dma-sg.c:129 vb2_dma_sg_alloc() warn: Please consider using kvcalloc instead Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Hans Verkuil authored
Fixes smatch warning: drivers/media/v4l2-core/v4l2-ctrls-core.c:1143 v4l2_ctrl_handler_init_class() warn: Please consider using kvcalloc instead Signed-off-by:
-
Hans Verkuil authored
Fixes smatch warning: drivers/media/v4l2-core/v4l2-subdev.c:978 __v4l2_subdev_state_alloc() warn: Please consider using kvcalloc instead Signed-off-by:
-
Benjamin Gaignard authored
Always set pps_cb_qp_offset and pps_cr_qp_offset values in Hantro/G2 register whatever is V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT flag value. The vendor code does the same to set these values. This fixes conformance test CAINIT_G_SHARP_3. Fluster HEVC score is increase by one with this patch. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
-
Benjamin Gaignard authored
PoC shall be int the range of -2^31 to 2^31 -1 (HEVC spec section 8.3.1 Decoding process for picture order count). The current way to know if an entry in reference picture array is free is to test if PoC = UNUSED_REF. Since UNUSED_REF is defined as '-1' that could lead to decode issue if one PoC also equal '-1'. PoC with value = '-1' exists in conformance test SLIST_B_Sony_9. Change the way unused entries are managed in reference pictures array to avoid using PoC to detect then. This patch doesn't change fluster HEVC score. Signed-off-by:
-
Benjamin Gaignard authored
Use pps->column_width_minus1[j] + 1 as value for the tile info buffer instead of pps->column_width_minus1[j + 1]. The patch fixes DBLK_E_VIXS_2, DBLK_F_VIXS_2, DBLK_G_VIXS_2, SAO_B_MediaTek_5, TILES_A_Cisco_2 and TILES_B_Cisco_1 tests in fluster. Fixes: cb5dd5a0 ("media: hantro: Introduce G2/HEVC decoder") Signed-off-by:
-
Benjamin Gaignard authored
Hantro decoder doesn't take care of the requested and aligned size of the capture buffer. Stop using the bitstream width/height and use capture frame size stored in the context to get the correct values. hantro_hevc_chroma_offset() and hantro_hevc_motion_vectors_offset() are only used in hantro_g2_hevc_dec.c so take the opportunity to move them here. fluster HEVC score goes up from 77 to 85 successful tests (over 147) with this patch. Signed-off-by:
-
Benjamin Gaignard authored
Hantro G2 post processor is able to down scale decoded frames by a factor of 2, 4 or 8. Add enum_framesizes() ops to postproc_ops structure to enumerate the possible output sizes for a given input resolution. For G2 post-processor use fsize->index (from 0 to 3) as power of 2 divisor. As described in v4l2 documentation return -EINVAL when scaling down isn't possible. fluster scores: 77/147 for HEVC 143/303 for VP9 Signed-off-by:
-
Ming Qian authored
G/S_PARM doesn't make sense for the capture queue of a stateful encoder, unless V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL is set to reserve hardware resources. Otherwise it will fail the v4l2-compliance Signed-off-by:
Ming Qian <ming.qian@nxp.com> Signed-off-by:
-
Ming Qian authored
when error occurs, driver set error flag, and driver need to wake up the poll wait Signed-off-by:
-
Eugen Hristev authored
With this, the csi2dc will take part in the media pipeline graph walk and validate the links with it's entities. Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
Eugen Hristev authored
The Microchip XISC supports a bus width of 14 bits. Add it to the supported bus widths. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Eugen Hristev authored
Remove stray line from formats struct. Signed-off-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
-
Eugen Hristev authored
Compact the list array to be more readable. No other changes, only cosmetic. Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
Eugen Hristev authored
The AWB workqueue runs in a kernel thread and needs to be synchronized w.r.t. the streaming status. It is possible that streaming is stopped while the AWB workq is running. In this case it is likely that the check for vb2_start_streaming_called is done at one point in time, but the AWB computations are done later, including a call to isc_update_profile, which requires streaming to be started. Thus , isc_update_profile will fail if during this operation sequence the streaming was stopped. To solve this issue, a mutex is added, that will serialize the awb work and streaming stopping, with the mention that either streaming is stopped completely including termination of the last frame is done, and after that the AWB work can check stream status and stop; either first AWB work is completed and after that the streaming can stop correctly. The awb spin lock cannot be used since this spinlock is taken in the same context and using it in the stop streaming will result in a recursion BUG. Signed-off-by:
-
Eugen Hristev authored
While this does not happen in production, this check should be done versus the mask, as checking with the YCYC value may not include some bits that may be set. It is correct and safe to check the whole mask. Fixes: 123aaf81 ("media: atmel: atmel-sama5d2-isc: fix YUYV format") Signed-off-by:
-
Eugen Hristev authored
Remove duplicate comments which are already in place before the struct definition. Signed-off-by:
-
Eugen Hristev authored
In s_fmt_vid_cap, we should check if vb2_is_busy and return EBUSY, not check if it's streaming to return the busy state. Suggested-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Eugen Hristev authored
During experiments with libcamera, it looks like vb2_is_streaming returns true before our start streaming is called. Order of operations is streamon -> queue -> start_streaming ISC would have started the DMA immediately when a buffer is being added to the vbqueue if the queue is streaming. It is more safe to start the DMA after the start streaming of the driver is called. Thus, even if vb2queue is streaming, add the buffer to the dma queue of the driver instead of actually starting the DMA process, if the start streaming has not been called yet. Tho achieve this, we have to use vb2_start_streaming_called instead of vb2_is_streaming. Signed-off-by:
-
Michael Rodin authored
The vertical subsampling factor is currently not considered in the offset calculation for plane cropping done in rpf_configure_partition. This causes a distortion (shift of the color plane) when formats with the vsub factor larger than 1 are used (e.g. NV12, see vsp1_video_formats in vsp1_pipe.c). This commit considers vsub factor for all planes except plane 0 (luminance). Drop generalization of the offset calculation to reduce the binary size. Fixes: e5ad37b6 ("[media] v4l: vsp1: Add cropping support") Signed-off-by:
Michael Rodin <mrodin@de.adit-jv.com> Signed-off-by:
LUU HOAI <hoai.luu.ub@renesas.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
Use the new vb2_queue_is_busy() helper to replace the open-coded version. Signed-off-by:
-
Laurent Pinchart authored
Use the vb2_fop_release() helper to replace the open-coded version. The video->lock is assigned to the queue lock, used by vb2_fop_release(), so the only functional difference is that v4l2_fh_release() is now called before vsp1_device_put(). This should be harmless. Signed-off-by:
-
Laurent Pinchart authored
vb2 queue ownership is managed by the ioctl handler helpers (vb2_ioctl_*). There are however use cases where drivers can benefit from checking queue ownership, for instance when open-coding an ioctl handler that needs to perform additional checks before calling the corresponding vb2 operation. Expose the vb2_queue_is_busy() function in the videobuf2-v4l2.h header, and change its first argument to a struct vb2_queue pointer as the function name implies it operates on a queue, not a video_device. Signed-off-by:
-
Laurent Pinchart authored
Replace the driver-specific definitions of MIPI CSI-2 data types with macros from mipi-csi2.h. Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by:
-
Laurent Pinchart authored
Replace the hardcoded MIPI CSI-2 data types with macros from mipi-csi2.h. Signed-off-by:
-
Mauro Carvalho Chehab authored
As warned by gcc 12.1: drivers/staging/media/atomisp/pci/runtime/rmgr/src/rmgr_vbuf.c: In function 'ia_css_rmgr_acq_vbuf': drivers/staging/media/atomisp/pci/runtime/rmgr/src/rmgr_vbuf.c:275:33: error: storing the address of local variable 'h' in '*handle' [-Werror=dangling-pointer=] 275 | *handle = &h; | ~~~~~~~~^~~~ drivers/staging/media/atomisp/pci/runtime/rmgr/src/rmgr_vbuf.c:257:40: note: 'h' declared here 257 | struct ia_css_rmgr_vbuf_handle h; | ^ drivers/staging/media/atomisp/pci/runtime/rmgr/src/rmgr_vbuf.c:257:40: note: 'handle' declared here cc1: all warnings being treated as errors The logic uses a temporary struct to update the handler, but, instead of copying the value to the pointer sent by the caller, it replaces it with the content with a local variable. That's wrong, and may lead the caller to use a weird value. Signed-off-by: -
Ming Qian authored
the output buffer count should >= min_buffer_out the capture buffer count should >= min_buffer_cap Signed-off-by:
-
Tom Rix authored
In stk_camera_read_reg() a single byte buffer is alloc-ed and freed on every function call. Since the size is known, move the buffer to the struct stk_camera where it will be alloc-ed and freed once. Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
-
Philipp Zabel authored
Let VIDIOC_ENUM_FRAMEINTERVALS return -EINVAL if userspace queries frame intervals for frame sizes unsupported by the encoder. Fixes the following v4l2-compliance failure: fail: v4l2-test-formats.cpp(123): found frame intervals for invalid size 47x16 fail: v4l2-test-formats.cpp(282): node->codec_mask & STATEFUL_ENCODER test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: FAIL [hverkuil: drop incorrect 'For decoder devices, return -ENOTTY.' in the commit log] Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
Set default colorspace to SRGB for JPEG encoder and decoder devices, to fix the following v4l2-compliance test failure: test VIDIOC_TRY_FMT: OK fail: v4l2-test-formats.cpp(818): fmt_raw.g_colorspace() != V4L2_COLORSPACE_SRGB Also explicitly set transfer function, YCbCr encoding and quantization range, as required by v4l2-compliance for the JPEG encoded side. Signed-off-by:
-
Yang Yingliang authored
The resource is checked in probe function, so there is no need do this check in remove function. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Yang Yingliang authored
The resource is checked in probe function, so there is no need do this check in remove function. Signed-off-by:
-
Yang Yingliang authored
The resource is checked in probe function, so there is no need do this check in remove function. Signed-off-by:
-
Christopher Obbard authored
Document the RK3328 compatible for rockchip-vdec. The driver shares the same base functionality as the RK3399 hardware so make sure that the RK3399 compatible is also included in the device tree. Signed-off-by:
Christopher Obbard <chris.obbard@collabora.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Fabio Estevam authored
The video viu driver is not a vital one for booting purposes. Remove the unneeded 'default y' option. Signed-off-by:
Fabio Estevam <festevam@denx.de> Reviewed-by:
-
Dorota Czaplejewicz authored
I tried to debug streaming in libcamera, where I stumbled upon this. I asked around on IRC where I was told that this statement in the documentation is wrong, so I'm submitting a removal. Signed-off-by:
Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm> Signed-off-by:
-
Lv Ruyi authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Signed-off-by:
-
