The glue layer may need to know current available role to do some
setting, eg, the wakeup setting. So we add ci_hdrc_query_available_role
for that.
Signed-off-by: Peter Chen <peter.chen@nxp.com>

The freescale.com e-mail domain is no longer active for quite some
time. Switch Li Jun's e-mail address to the NXP domain.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>

Fix the ENDIAN issue when assign dTD entry.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>

Pull networking fixes from David Miller:

 - Fix the build with certain Kconfig combinations for the Chelsio
   inline TLS device, from Rohit Maheshwar and Vinay Kumar Yadavi.

 - Fix leak in genetlink, from Cong Lang.

 - Fix out of bounds packet header accesses in seg6, from Ahmed
   Abdelsalam.

 - Two XDP fixes in the ENA driver, from Sameeh Jubran

 - Use rwsem in device rename instead of a seqcount because this code
   can sleep, from Ahmed S. Darwish.

 - Fix WoL regressions in r8169, from Heiner Kallweit.

 - Fix qed crashes in kdump mode, from Alok Prasad.

 - Fix the callbacks used for certain thermal zones in mlxsw, from Vadim
   Pasternak.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
  net: dsa: lantiq_gswip: fix and improve the unsupported interface error
  mlxsw: core: Use different get_trend() callbacks for different thermal zones
  net: dp83869: Reset return variable if PHY strap is read
  rhashtable: Drop raw RCU deref in nested_table_free
  cxgb4: Use kfree() instead kvfree() where appropriate
  net: qed: fixes crash while running driver in kdump kernel
  vsock/vmci: make vmci_vsock_transport_cb() static
  net: ethtool: Fix comment mentioning typo in IS_ENABLED()
  net: phy: mscc: fix Serdes configuration in vsc8584_config_init
  net: mscc: Fix OF_MDIO config check
  net: marvell: Fix OF_MDIO config check
  net: dp83867: Fix OF_MDIO config check
  net: dp83869: Fix OF_MDIO config check
  net: ethernet: mvneta: fix MVNETA_SKB_HEADROOM alignment
  ethtool: linkinfo: remove an unnecessary NULL check
  net/xdp: use shift instead of 64 bit division
  crypto/chtls:Fix compile error when CONFIG_IPV6 is disabled
  inet_connection_sock: clear inet_num out of destroy helper
  yam: fix possible memory leak in yam_init_driver
  lan743x: Use correct MAC_CR configuration for 1 GBit speed
  ...

Pull sparc updates from David Miller:

 - Rework the sparc32 page tables so that READ_ONCE(*pmd), as done by
   generic code, operates on a word sized element. From Will Deacon.

 - Some scnprintf() conversions, from Chen Zhou.

 - A pin_user_pages() conversion from John Hubbard.

 - Several 32-bit ptrace register handling fixes and such from Al Viro.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next:
  fix a braino in "sparc32: fix register window handling in genregs32_[gs]et()"
  sparc32: mm: Only call ctor()/dtor() functions for first and last user
  sparc32: mm: Disable SPLIT_PTLOCK_CPUS
  sparc32: mm: Don't try to free page-table pages if ctor() fails
  sparc32: register memory occupied by kernel as memblock.memory
  sparc: remove unused header file nfs_fs.h
  sparc32: fix register window handling in genregs32_[gs]et()
  sparc64: fix misuses of access_process_vm() in genregs32_[sg]et()
  oradax: convert get_user_pages() --> pin_user_pages()
  sparc: use scnprintf() in show_pciobppath_attr() in vio.c
  sparc: use scnprintf() in show_pciobppath_attr() in pci.c
  tty: vcc: Fix error return code in vcc_probe()
  sparc32: mm: Reduce allocation size for PMD and PTE tables
  sparc32: mm: Change pgtable_t type to pte_t * instead of struct page *
  sparc32: mm: Restructure sparc32 MMU page-table layout
  sparc32: mm: Fix argument checking in __srmmu_get_nocache()
  sparc64: Replace zero-length array with flexible-array
  sparc: mm: return true,false in kern_addr_valid()

While trying to use the lantiq_gswip driver on one of my boards I made
a mistake when specifying the phy-mode (because the out-of-tree driver
wants phy-mode "gmii" or "mii" for the internal PHYs). In this case the
following error is printed multiple times:
  Unsupported interface: 3

While it gives at least a hint at what may be wrong it is not very user
friendly. Print the human readable phy-mode and also which port is
configured incorrectly (this hardware supports ports 0..6) to improve
the cases where someone made a mistake.

Fixes: 14fceff4 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver registers three different types of thermal zones: For the
ASIC itself, for port modules and for gearboxes.

Currently, all three types use the same get_trend() callback which does
not work correctly for the ASIC thermal zone. The callback assumes that
the device data is of type 'struct mlxsw_thermal_module', whereas for
the ASIC thermal zone 'struct mlxsw_thermal' is passed as device data.

Fix this by using one get_trend() callback for the ASIC thermal zone and
another for the other two types.

Fixes: 6f73862f ("mlxsw: core: Add the hottest thermal zone detection")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.8 kernel cycle.

  It's just really boring this time. Zero core changes. Just linear
  development, cleanups and misc noncritical fixes. Some new drivers for
  very new Qualcomm and Intel chips.

  New drivers:

   - Intel Jasper Lake support.

   - NXP Freescale i.MX8DXL support.

   - Qualcomm SM8250 support.

   - Renesas R8A7742 SH-PFC support.

  Driver improvements:

   - Severe cleanup and modernization of the MCP23s08 driver.

   - Mediatek driver modularized.

   - Setting config supported in the Meson driver.

   - Wakeup support for the Broadcom BCM7211"

* tag 'pinctrl-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
  pinctrl: sprd: Fix the incorrect pull-up definition
  pinctrl: pxa: pxa2xx: Remove 'pxa2xx_pinctrl_exit()' which is unused and broken
  pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'
  pinctrl: freescale: imx: Fix an error handling path in 'imx_pinctrl_probe()'
  pinctrl: sirf: add missing put_device() call in sirfsoc_gpio_probe()
  pinctrl: imxl: Fix an error handling path in 'imx1_pinctrl_core_probe()'
  pinctrl: bcm2835: Add support for wake-up interrupts
  pinctrl: bcm2835: Match BCM7211 compatible string
  dt-bindings: pinctrl: Document optional BCM7211 wake-up interrupts
  dt-bindings: pinctrl: Document 7211 compatible for brcm, bcm2835-gpio.txt
  dt-bindings: pinctrl: stm32: Add missing interrupts property
  pinctrl: at91-pio4: Add COMPILE_TEST support
  pinctrl: Fix return value about devm_platform_ioremap_resource()
  MAINTAINERS: Renesas Pin Controllers are supported
  dt-bindings: pinctrl: ocelot: Add Sparx5 SoC support
  pinctrl: ocelot: Fix GPIO interrupt decoding on Jaguar2
  pinctrl: ocelot: Remove instance number from pin functions
  pinctrl: ocelot: Always register GPIO driver
  dt-bindings: pinctrl: rockchip: update example
  pinctrl: amd: Add ACPI dependency
  ...

Pull RTC updates from Alexandre Belloni:
 "Not much this cycle apart from the ingenic rtc driver rework.

  The fixes are mainly minor issues reported by coccinelle rather than
  real world issues.

  Subsystem:

   - new VL flag for backup switch over

  Drivers:

   - ingenic: only support device tree

   - pcf2127: report battery switch over, handle nowayout"

* tag 'rtc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (29 commits)
  rtc: pcf2127: watchdog: handle nowayout feature
  rtc: fsl-ftm-alarm: fix freeze(s2idle) failed to wake
  rtc: abx80x: Provide debug feedback for invalid dt properties
  rtc: abx80x: Add Device Tree matching table
  rtc: rv3028: Add missed check for devm_regmap_init_i2c()
  rtc: mpc5121: Use correct return value for mpc5121_rtc_probe()
  rtc: goldfish: Use correct return value for goldfish_rtc_probe()
  rtc: snvs: Add necessary clock operations for RTC APIs
  rtc: snvs: Make SNVS clock always prepared
  rtc: ingenic: Reset regulator register in probe
  rtc: ingenic: Fix masking of error code
  rtc: ingenic: Remove unused fields from private structure
  rtc: ingenic: Set wakeup params in probe
  rtc: ingenic: Enable clock in probe
  rtc: ingenic: Use local 'dev' variable in probe
  rtc: ingenic: Only support probing from devicetree
  rtc: mc13xxx: fix a double-unlock issue
  rtc: stmp3xxx: update contact email
  rtc: max77686: Use single-byte writes on MAX77620
  rtc: pcf2127: report battery switch over
  ...

Pull NTB updates from Jon Mason:
 "Intel Icelake NTB support, Intel driver bug fixes, and lots of bug
  fixes for ntb tests"

* tag 'ntb-5.8' of git://github.com/jonmason/ntb:
  NTB: ntb_test: Fix bug when counting remote files
  NTB: perf: Fix race condition when run with ntb_test
  NTB: perf: Fix support for hardware that doesn't have port numbers
  NTB: perf: Don't require one more memory window than number of peers
  NTB: ntb_pingpong: Choose doorbells based on port number
  NTB: Fix the default port and peer numbers for legacy drivers
  NTB: Revert the change to use the NTB device dev for DMA allocations
  NTB: ntb_tool: reading the link file should not end in a NULL byte
  ntb_perf: avoid false dma unmap of destination address
  ntb_perf: increase sleep time from one milli sec to one sec
  ntb_tool: pass correct struct device to dma_alloc_coherent
  ntb_perf: pass correct struct device to dma_alloc_coherent
  ntb: hw: remove the code that sets the DMA mask
  NTB: correct ntb_peer_spad_addr and ntb_peer_spad_read comment typos
  ntb: intel: fix static declaration
  ntb: intel: add hw workaround for NTB BAR alignment
  ntb: intel: Add Icelake (gen4) support for Intel NTB
  NTB: Fix static check warning in perf_clear_test
  include/ntb: Fix typo in ntb_unregister_device description

Merge tag 'apparmor-pr-2020-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor

Pull apparmor updates from John Johansen:
 "Features:
   - Replace zero-length array with flexible-array
   - add a valid state flags check
   - add consistency check between state and dfa diff encode flags
   - add apparmor subdir to proc attr interface
   - fail unpack if profile mode is unknown
   - add outofband transition and use it in xattr match
   - ensure that dfa state tables have entries

  Cleanups:
   - Use true and false for bool variable
   - Remove semicolon
   - Clean code by removing redundant instructions
   - Replace two seq_printf() calls by seq_puts() in aa_label_seq_xprint()
   - remove duplicate check of xattrs on profile attachment
   - remove useless aafs_create_symlink

  Bug fixes:
   - Fix memory leak of profile proxy
   - fix introspection of of task mode for unconfined tasks
   - fix nnp subset test for unconfined
   - check/put label on apparmor_sk_clone_security()"

* tag 'apparmor-pr-2020-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: Fix memory leak of profile proxy
  apparmor: fix introspection of of task mode for unconfined tasks
  apparmor: check/put label on apparmor_sk_clone_security()
  apparmor: Use true and false for bool variable
  security/apparmor/label.c: Clean code by removing redundant instructions
  apparmor: Replace zero-length array with flexible-array
  apparmor: ensure that dfa state tables have entries
  apparmor: remove duplicate check of xattrs on profile attachment.
  apparmor: add outofband transition and use it in xattr match
  apparmor: fail unpack if profile mode is unknown
  apparmor: fix nnp subset test for unconfined
  apparmor: remove useless aafs_create_symlink
  apparmor: add proc subdir to attrs
  apparmor: add consistency check between state and dfa diff encode flags
  apparmor: add a valid state flags check
  AppArmor: Remove semicolon
  apparmor: Replace two seq_printf() calls by seq_puts() in aa_label_seq_xprint()

Commit 6cc7c266 ("ima: Call ima_calc_boot_aggregate() in
ima_eventdigest_init()") added a call to ima_calc_boot_aggregate() so that
the digest can be recalculated for the boot_aggregate measurement entry if
the 'd' template field has been requested. For the 'd' field, only SHA1 and
MD5 digests are accepted.

Given that ima_eventdigest_init() does not have the __init annotation, all
functions called should not have it. This patch removes __init from
ima_pcrread().

Cc: stable@vger.kernel.org
Fixes:  6cc7c266 ("ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When the proxy isn't replaced and the profile is removed, the proxy
is being leaked resulting in a kmemleak check message of

unreferenced object 0xffff888077a3a490 (size 16):
  comm "apparmor_parser", pid 128041, jiffies 4322684109 (age 1097.028s)
  hex dump (first 16 bytes):
    03 00 00 00 00 00 00 00 b0 92 fd 4b 81 88 ff ff  ...........K....
  backtrace:
    [<0000000084d5daf2>] aa_alloc_proxy+0x58/0xe0
    [<00000000ecc0e21a>] aa_alloc_profile+0x159/0x1a0
    [<000000004cc9ce15>] unpack_profile+0x275/0x1c40
    [<000000007332b3ca>] aa_unpack+0x1e7/0x7e0
    [<00000000e25e31bd>] aa_replace_profiles+0x18a/0x1d10
    [<00000000350d9415>] policy_update+0x237/0x650
    [<000000003fbf934e>] profile_load+0x122/0x160
    [<0000000047f7b781>] vfs_write+0x139/0x290
    [<000000008ad12358>] ksys_write+0xcd/0x170
    [<000000001a9daa7b>] do_syscall_64+0x70/0x310
    [<00000000b9efb0cf>] entry_SYSCALL_64_after_hwframe+0x49/0xb3

Make sure to cleanup the profile's embedded label which will result
on the proxy being properly freed.

Fixes: 637f688d ("apparmor: switch from profiles to using labels on contexts")
Signed-off-by: John Johansen <john.johansen@canonical.com>

Fix two issues with introspecting the task mode.

1. If a task is attached to a unconfined profile that is not the
   ns->unconfined profile then. Mode the mode is always reported
   as -

      $ ps -Z
      LABEL                               PID TTY          TIME CMD
      unconfined                         1287 pts/0    00:00:01 bash
      test (-)                           1892 pts/0    00:00:00 ps

   instead of the correct value of (unconfined) as shown below

      $ ps -Z
      LABEL                               PID TTY          TIME CMD
      unconfined                         2483 pts/0    00:00:01 bash
      test (unconfined)                  3591 pts/0    00:00:00 ps

2. if a task is confined by a stack of profiles that are unconfined
   the output of label mode is again the incorrect value of (-) like
   above, instead of (unconfined). This is because the visibile
   profile count increment is skipped by the special casing of
   unconfined.

Fixes: f1bd9041 ("apparmor: add the base fns() for domain labels")
Signed-off-by: John Johansen <john.johansen@canonical.com>

Currently apparmor_sk_clone_security() does not check for existing
label/peer in the 'new' struct sock; it just overwrites it, if any
(with another reference to the label of the source sock.)

    static void apparmor_sk_clone_security(const struct sock *sk,
                                           struct sock *newsk)
    {
            struct aa_sk_ctx *ctx = SK_CTX(sk);
            struct aa_sk_ctx *new = SK_CTX(newsk);

            new->label = aa_get_label(ctx->label);
            new->peer = aa_get_label(ctx->peer);
    }

This might leak label references, which might overflow under load.
Thus, check for and put labels, to prevent such errors.

Note this is similarly done on:

    static int apparmor_socket_post_create(struct socket *sock, ...)
    ...
            if (sock->sk) {
                    struct aa_sk_ctx *ctx = SK_CTX(sock->sk);

                    aa_put_label(ctx->label);
                    ctx->label = aa_get_label(label);
            }
    ...

Context:
-------

The label reference count leak is observed if apparmor_sock_graft()
is called previously: this sets the 'ctx->label' field by getting
a reference to the current label (later overwritten, without put.)

    static void apparmor_sock_graft(struct sock *sk, ...)
    {
            struct aa_sk_ctx *ctx = SK_CTX(sk);

            if (!ctx->label)
                    ctx->label = aa_get_current_label();
    }

And that is the case on crypto/af_alg.c:af_alg_accept():

    int af_alg_accept(struct sock *sk, struct socket *newsock, ...)
    ...
            struct sock *sk2;
            ...
            sk2 = sk_alloc(...);
            ...
            security_sock_graft(sk2, newsock);
            security_sk_clone(sk, sk2);
    ...

Apparently both calls are done on their own right, especially for
other LSMs, being introduced in 2010/2014, before apparmor socket
mediation in 2017 (see commits [1,2,3,4]).

So, it looks OK there! Let's fix the reference leak in apparmor.

Test-case:
---------

Exercise that code path enough to overflow label reference count.

    $ cat aa-refcnt-af_alg.c
    #include <stdio.h>
    #include <string.h>
    #include <unistd.h>
    #include <sys/socket.h>
    #include <linux/if_alg.h>

    int main() {
            int sockfd;
            struct sockaddr_alg sa;

            /* Setup the crypto API socket */
            sockfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
            if (sockfd < 0) {
                    perror("socket");
                    return 1;
            }

            memset(&sa, 0, sizeof(sa));
            sa.salg_family = AF_ALG;
            strcpy((char *) sa.salg_type, "rng");
            strcpy((char *) sa.salg_name, "stdrng");

            if (bind(sockfd, (struct sockaddr *) &sa, sizeof(sa)) < 0) {
                    perror("bind");
                    return 1;
            }

            /* Accept a "connection" and close it; repeat. */
            while (!close(accept(sockfd, NULL, 0)));

            return 0;
    }

    $ gcc -o aa-refcnt-af_alg aa-refcnt-af_alg.c

    $ ./aa-refcnt-af_alg
    <a few hours later>

    [ 9928.475953] refcount_t overflow at apparmor_sk_clone_security+0x37/0x70 in aa-refcnt-af_alg[1322], uid/euid: 1000/1000
    ...
    [ 9928.507443] RIP: 0010:apparmor_sk_clone_security+0x37/0x70
    ...
    [ 9928.514286]  security_sk_clone+0x33/0x50
    [ 9928.514807]  af_alg_accept+0x81/0x1c0 [af_alg]
    [ 9928.516091]  alg_accept+0x15/0x20 [af_alg]
    [ 9928.516682]  SYSC_accept4+0xff/0x210
    [ 9928.519609]  SyS_accept+0x10/0x20
    [ 9928.520190]  do_syscall_64+0x73/0x130
    [ 9928.520808]  entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Note that other messages may be seen, not just overflow, depending on
the value being incremented by kref_get(); on another run:

    [ 7273.182666] refcount_t: saturated; leaking memory.
    ...
    [ 7273.185789] refcount_t: underflow; use-after-free.

Kprobes:
-------

Using kprobe events to monitor sk -> sk_security -> label -> count (kref):

Original v5.7 (one reference leak every iteration)

 ... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd2
 ... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd4
 ... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd3
 ... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd5
 ... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd4
 ... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd6

Patched v5.7 (zero reference leak per iteration)

 ... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593
 ... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594
 ... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593
 ... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594
 ... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593
 ... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594

Commits:
-------

[1] commit 507cad35 ("crypto: af_alg - Make sure sk_security is initialized on accept()ed sockets")
[2] commit 4c63f83c ("crypto: af_alg - properly label AF_ALG socket")
[3] commit 2acce6aa ("Networking") a.k.a ("crypto: af_alg - Avoid sock_graft call warning)
[4] commit 56974a6f ("apparmor: add base infastructure for socket mediation")

Fixes: 56974a6f ("apparmor: add base infastructure for socket mediation")
Reported-by: Brian Moyles <bmoyles@netflix.com>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>

Pull char/misc driver updates from Greg KH:
 "Here is the large set of char/misc driver patches for 5.8-rc1

  Included in here are:

   - habanalabs driver updates, loads

   - mhi bus driver updates

   - extcon driver updates

   - clk driver updates (approved by the clock maintainer)

   - firmware driver updates

   - fpga driver updates

   - gnss driver updates

   - coresight driver updates

   - interconnect driver updates

   - parport driver updates (it's still alive!)

   - nvmem driver updates

   - soundwire driver updates

   - visorbus driver updates

   - w1 driver updates

   - various misc driver updates

  In short, loads of different driver subsystem updates along with the
  drivers as well.

  All have been in linux-next for a while with no reported issues"

* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
  habanalabs: correctly cast u64 to void*
  habanalabs: initialize variable to default value
  extcon: arizona: Fix runtime PM imbalance on error
  extcon: max14577: Add proper dt-compatible strings
  extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
  extcon: remove redundant assignment to variable idx
  w1: omap-hdq: print dev_err if irq flags are not cleared
  w1: omap-hdq: fix interrupt handling which did show spurious timeouts
  w1: omap-hdq: fix return value to be -1 if there is a timeout
  w1: omap-hdq: cleanup to add missing newline for some dev_dbg
  /dev/mem: Revoke mappings when a driver claims the region
  misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
  misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
  misc: xilinx-sdfec: improve get_user_pages_fast() error handling
  nvmem: qfprom: remove incorrect write support
  habanalabs: handle MMU cache invalidation timeout
  habanalabs: don't allow hard reset with open processes
  habanalabs: GAUDI does not support soft-reset
  habanalabs: add print for soft reset due to event
  habanalabs: improve MMU cache invalidation code
  ...

Pull driver core updates from Greg KH:
 "Here is the set of driver core patches for 5.8-rc1.

  Not all that huge this release, just a number of small fixes and
  updates:

   - software node fixes

   - kobject now sends KOBJ_REMOVE when it is removed from sysfs, not
     when it is removed from memory (which could come much later)

   - device link additions and fixes based on testing on more devices

   - firmware core cleanups

   - other minor changes, full details in the shortlog

  All have been in linux-next for a while with no reported issues"

* tag 'driver-core-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (23 commits)
  driver core: Update device link status correctly for SYNC_STATE_ONLY links
  firmware_loader: change enum fw_opt to u32
  software node: implement software_node_unregister()
  kobject: send KOBJ_REMOVE uevent when the object is removed from sysfs
  driver core: Remove unnecessary is_fwnode_dev variable in device_add()
  drivers property: When no children in primary, try secondary
  driver core: platform: Fix spelling errors in platform.c
  driver core: Remove check in driver_deferred_probe_force_trigger()
  of: platform: Batch fwnode parsing when adding all top level devices
  driver core: fw_devlink: Add support for batching fwnode parsing
  driver core: Look for waiting consumers only for a fwnode's primary device
  driver core: Move code to the right part of the file
  Revert "Revert "driver core: Set fw_devlink to "permissive" behavior by default""
  drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish
  firmware_loader: move fw_fallback_config to a private kernel symbol namespace
  driver core: Add missing '\n' in log messages
  driver/base/soc: Use kobj_to_dev() API
  Add documentation on meaning of -EPROBE_DEFER
  driver core: platform: remove redundant assignment to variable ret
  debugfs: Use the correct style for SPDX License Identifier
  ...

Pull staging/IIO driver updates from Greg KH:
 "Here is the large set of staging and IIO driver changes for 5.8-rc1

  Nothing major, but a lot of new IIO drivers are included in here,
  along with other core iio cleanups and changes.

  On the staging driver front, again, nothing noticable. No new
  deletions or additions, just a ton of tiny cleanups all over the tree
  done by a lot of different people. Most coding style, but many actual
  real fixes and cleanups that are nice to see.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (618 commits)
  staging: rtl8723bs: Use common packet header constants
  staging: sm750fb: Add names to proc_setBLANK args
  staging: most: usb: init return value in default path of switch/case expression
  staging: vchiq: Get rid of VCHIQ_SERVICE_OPENEND callback reason
  staging: vchiq: move vchiq_release_message() into vchiq
  staging: vchi: Get rid of C++ guards
  staging: vchi: Get rid of not implemented function declarations
  staging: vchi: Get rid of vchiq_status_to_vchi()
  staging: vchi: Get rid of vchi_service_set_option()
  staging: vchi: Merge vchi_msg_queue() into vchi_queue_kernel_message()
  staging: vchiq: Move copy callback handling into vchiq
  staging: vchi: Get rid of vchi_queue_user_message()
  staging: vchi: Get rid of vchi_service_destroy()
  staging: most: usb: use function sysfs_streq
  staging: most: usb: add missing put_device calls
  staging: most: usb: use correct error codes
  staging: most: usb: replace code to calculate array index
  staging: most: usb: don't use error path to exit function on success
  staging: most: usb: move allocation of URB out of critical section
  staging: most: usb: return 0 instead of variable
  ...

Pull tty/serial driver updates from Greg KH:
 "Here is the tty and serial driver updates for 5.8-rc1

  Nothing huge at all, just a lot of little serial driver fixes, updates
  for new devices and features, and other small things. Full details are
  in the shortlog.

  All of these have been in linux-next with no issues for a while"

* tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (67 commits)
  tty: serial: qcom_geni_serial: Add 51.2MHz frequency support
  tty: serial: imx: clear Ageing Timer Interrupt in handler
  serial: 8250_fintek: Add F81966 Support
  sc16is7xx: Add flag to activate IrDA mode
  dt-bindings: sc16is7xx: Add flag to activate IrDA mode
  serial: 8250: Support rs485 bus termination GPIO
  serial: 8520_port: Fix function param documentation
  dt-bindings: serial: Add binding for rs485 bus termination GPIO
  vt: keyboard: avoid signed integer overflow in k_ascii
  serial: 8250: Enable 16550A variants by default on non-x86
  tty: hvc_console, fix crashes on parallel open/close
  serial: imx: Initialize lock for non-registered console
  sc16is7xx: Read the LSR register for basic device presence check
  sc16is7xx: Allow sharing the IRQ line
  sc16is7xx: Use threaded IRQ
  sc16is7xx: Always use falling edge IRQ
  tty: n_gsm: Fix bogus i++ in gsm_data_kick
  tty: n_gsm: Remove unnecessary test in gsm_print_packet()
  serial: stm32: add no_console_suspend support
  tty: serial: fsl_lpuart: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
  ...

Pull USB/PHY driver updates from Greg KH:
 "Here are the large set of USB and PHY driver updates for 5.8-rc1.

  Nothing huge, just lots of little things:

   - USB gadget fixes and additions all over the place

   - new PHY drivers

   - PHY driver fixes and updates

   - XHCI driver updates

   - musb driver updates

   - more USB-serial driver ids added

   - various USB quirks added

   - thunderbolt minor updates and fixes

   - typec updates and additions

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits)
  usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs
  usb: dwc3: meson-g12a: fix error path when fetching the reset line fails
  Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings"
  Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180"
  Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver"
  USB: serial: ch341: fix lockup of devices with limited prescaler
  USB: serial: ch341: add basis for quirk detection
  CDC-ACM: heed quirk also in error handling
  USB: serial: option: add Telit LE910C1-EUX compositions
  usb: musb: Fix runtime PM imbalance on error
  usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set
  usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle
  usb: musb: use true for 'use_dma'
  usb: musb: start session in resume for host port
  usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  USB: serial: qcserial: add DW5816e QDL support
  thunderbolt: Add trivial .shutdown
  usb: dwc3: keystone: Turn on USB3 PHY before controller
  dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
  dt-bindings: usb: convert keystone-usb.txt to YAML
  ...

lost npc in PTRACE_SETREGSET, breaking PTRACE_SETREGS as well

Fixes: cf51e129 "sparc32: fix register window handling in genregs32_[gs]et()"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

When the PHY's strap register is read to determine if lane swapping is
needed the phy_read_mmd returns the value back into the ret variable.

If the call to read the strap fails the failed value is returned.  If
the call to read the strap is successful then ret is possibly set to a
non-zero positive number. Without reseting the ret value to 0 this will
cause the parse DT function to return a failure.

Fixes: c4566aec ("net: phy: dp83869: Update port-mirroring to read straps")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch replaces some unnecessary uses of rcu_dereference_raw
in the rhashtable code with rcu_dereference_protected.

The top-level nested table entry is only marked as RCU because it
shares the same type as the tree entries underneath it.  So it
doesn't need any RCU protection.

We also don't need RCU protection when we're freeing a nested RCU
table because by this stage we've long passed a memory barrier
when anyone could change the nested table.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull arch/sh updates from Rich Felker:
 "Fix for arch/sh build regression with newer binutils, removal of SH5,
  fixes for module exports, and misc cleanup"

* tag 'sh-for-5.8' of git://git.libc.org/linux-sh:
  sh: remove sh5 support
  sh: add missing EXPORT_SYMBOL() for __delay
  sh: Convert ins[bwl]/outs[bwl] macros to inline functions
  sh: Convert iounmap() macros to inline functions
  sh: Add missing DECLARE_EXPORT() for __ashiftrt_r4_xx
  sh: configs: Cleanup old Kconfig IO scheduler options
  arch/sh: vmlinux.scr
  sh: Replace CONFIG_MTD_M25P80 with CONFIG_MTD_SPI_NOR in sh7757lcr_defconfig
  sh: sh4a: Bring back tmu3_device early device

Pull Kconfig updates from Masahiro Yamada:

 - allow only 'config', 'comment', 'if' statements inside 'choice' since
   the other statements are not sensible inside 'choice' and should be
   grammatical error

 - support LMC_KEEP env variable for 'make local{yes,mod}config' to
   preserve some CONFIG options

 - deprecate 'make kvmconfig' and 'make xenconfig' in favor of
   'make kvm_guest.config' and 'make xen.config'

 - code cleanups

* tag 'kconfig-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: announce removal of 'kvmconfig' and 'xenconfig' shorthands
  streamline_config.pl: add LMC_KEEP to preserve some kconfigs
  kconfig: allow only 'config', 'comment', and 'if' inside 'choice'
  kconfig: tests: remove randconfig test for choice in choice
  kconfig: do not assign a variable in the return statement
  kconfig: do not use OR-assignment for zero-cleared structure

Pull Kbuild updates from Masahiro Yamada:

 - fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32

 - ensure to rebuild all objects when the compiler is upgraded

 - exclude system headers from dependency tracking and fixdep processing

 - fix potential bit-size mismatch between the kernel and BPF user-mode
   helper

 - add the new syntax 'userprogs' to build user-space programs for the
   target architecture (the same arch as the kernel)

 - compile user-space sample code under samples/ for the target arch
   instead of the host arch

 - make headers_install fail if a CONFIG option is leaked to user-space

 - sanitize the output format of scripts/checkstack.pl

 - handle ARM 'push' instruction in scripts/checkstack.pl

 - error out before modpost if a module name conflict is found

 - error out when multiple directories are passed to M= because this
   feature is broken for a long time

 - add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info

 - a lot of cleanups of modpost

 - dump vmlinux symbols out into vmlinux.symvers, and reuse it in the
   second pass of modpost

 - do not run the second pass of modpost if nothing in modules is
   updated

 - install modules.builtin(.modinfo) by 'make install' as well as by
   'make modules_install' because it is useful even when
   CONFIG_MODULES=n

 - add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ
   to allow users to use alternatives such as pigz, pbzip2, etc.

* tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (96 commits)
  kbuild: add variables for compression tools
  Makefile: install modules.builtin even if CONFIG_MODULES=n
  mksysmap: Fix the mismatch of '.L' symbols in System.map
  kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS
  modpost: change elf_info->size to size_t
  modpost: remove is_vmlinux() helper
  modpost: strip .o from modname before calling new_module()
  modpost: set have_vmlinux in new_module()
  modpost: remove mod->skip struct member
  modpost: add mod->is_vmlinux struct member
  modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}()
  modpost: remove mod->is_dot_o struct member
  modpost: move -d option in scripts/Makefile.modpost
  modpost: remove -s option
  modpost: remove get_next_text() and make {grab,release_}file static
  modpost: use read_text_file() and get_line() for reading text files
  modpost: avoid false-positive file open error
  modpost: fix potential mmap'ed file overrun in get_src_version()
  modpost: add read_text_file() and get_line() helpers
  modpost: do not call get_modinfo() for vmlinux(.o)
  ...

Pull dma-mapping helpers from Christoph Hellwig:
 "These were in a separate stable branch so that various media and drm
  trees could pull the in for bug fixes, but looking at linux-next that
  hasn't actually happened yet. Still sending the APIs to you in the
  hope that these bug fixes get picked up for 5.8 in one way or another.

  Summary:

   - add DMA mapping helpers for struct sg_table (Marek Szyprowski)"

* tag 'dma-mapping-5.8-2' of git://git.infradead.org/users/hch/dma-mapping:
  iommu: add generic helper for mapping sgtable objects
  scatterlist: add generic wrappers for iterating over sgtable objects
  dma-mapping: add generic helpers for mapping sgtable objects

Pull dma-mapping updates from Christoph Hellwig:

 - enhance the dma pool to allow atomic allocation on x86 with AMD SEV
   (David Rientjes)

 - two small cleanups (Jason Yan and Peter Collingbourne)

* tag 'dma-mapping-5.8' of git://git.infradead.org/users/hch/dma-mapping:
  dma-contiguous: fix comment for dma_release_from_contiguous
  dma-pool: scale the default DMA coherent pool size with memory capacity
  x86/mm: unencrypted non-blocking DMA allocations use coherent pools
  dma-pool: add pool sizes to debugfs
  dma-direct: atomic allocations must come from atomic coherent pools
  dma-pool: dynamically expanding atomic pools
  dma-pool: add additional coherent pools to map to gfp mask
  dma-remap: separate DMA atomic pools from direct remap code
  dma-debug: make __dma_entry_alloc_check_leak() static

Pull dmi update from Jean Delvare.

* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  firmware/dmi: Report DMI Bios & EC firmware release

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Program MPS for RCiEP devices (Ashok Raj)

   - Fix pci_register_host_bridge() device_register() error handling
     (Rob Herring)

   - Fix pci_host_bridge struct device release/free handling (Rob
     Herring)

  Resource management:

   - Allow resizing BARs for devices on root bus (Ard Biesheuvel)

  Power management:

   - Reduce Thunderbolt resume time by working around devices that don't
     support DLL Link Active reporting (Mika Westerberg)

   - Work around a Pericom USB controller OHCI/EHCI PME# defect
     (Kai-Heng Feng)

  Virtualization:

   - Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok
     Raj)

   - Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner)

   - Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven)

  Error handling:

   - Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership
     (Alexandru Gagniuc, Kuppuswamy Sathyanarayanan)

   - Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER
     events (Kuppuswamy Sathyanarayanan)

   - Don't enable AER by default in Kconfig (Bjorn Helgaas)

  Peer-to-peer DMA:

   - Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher)

  ASPM:

   - Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng)

  Endpoint framework:

   - Fix DMA channel release in test (Kunihiko Hayashi)

   - Add page size as argument to pci_epc_mem_init() (Lad Prabhakar)

   - Add support to handle multiple base for mapping outbound memory
     (Lad Prabhakar)

  Generic host bridge driver:

   - Support building as module (Rob Herring)

   - Eliminate pci_host_common_probe wrappers (Rob Herring)

  Amlogic Meson PCIe controller driver:

   - Don't use FAST_LINK_MODE to set up link (Marc Zyngier)

  Broadcom STB PCIe controller driver:

   - Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan)

   - Fix clk_put() error (Jim Quinlan)

   - Fix window register offset (Jim Quinlan)

   - Assert fundamental reset on initialization (Nicolas Saenz Julienne)

   - Add notify xHCI reset property (Nicolas Saenz Julienne)

   - Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas
     Saenz Julienne)

   - Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas
     Saenz Julienne)

  Cadence PCIe controller driver:

   - Remove "cdns,max-outbound-regions" DT property (replaced by
     "ranges") (Kishon Vijay Abraham I)

   - Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT
     (Kishon Vijay Abraham I)

  Marvell Aardvark PCIe controller driver:

   - Improve link training (Marek Behún)

   - Add PHY support (Marek Behún)

   - Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek
     Behún)

   - Train link immediately after enabling training to work around
     detection issues with some cards (Pali Rohár)

   - Issue PERST via GPIO to work around detection issues (Pali Rohár)

   - Don't blindly enable ASPM L0s (Pali Rohár)

   - Replace custom macros by standard linux/pci_regs.h macros (Pali
     Rohár)

  Microsoft Hyper-V host bridge driver:

   - Fix probe failure path to release resource (Wei Hu)

   - Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu)

  Renesas R-Car PCIe controller driver:

   - Fix incorrect programming of OB windows (Andrew Murray)

   - Add suspend/resume (Kazufumi Ikeda)

   - Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar)

   - Add endpoint controller driver (Lad Prabhakar)

   - Fix PCIEPAMR mask calculation (Lad Prabhakar)

   - Add r8a77961 to DT binding (Yoshihiro Shimoda)

  Socionext UniPhier Pro5 controller driver:

   - Add endpoint controller driver (Kunihiko Hayashi)

  Synopsys DesignWare PCIe controller driver:

   - Program outbound ATU upper limit register (Alan Mikhak)

   - Fix inner MSI IRQ domain registration (Marc Zyngier)

  Miscellaneous:

   - Check for platform_get_irq() failure consistently (negative return
     means failure) (Aman Sharma)

   - Fix several runtime PM get/put imbalances (Dinghao Liu)

   - Use flexible-array and struct_size() helpers for code cleanup
     (Gustavo A. R. Silva)

   - Update & fix issues in bridge emulation of PCIe registers (Jon
     Derrick)

   - Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc)
     (Krzysztof Wilczyński)

   - Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)"

* tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits)
  PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver
  PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints
  PCI/DPC: Print IRQ number used by port
  PCI/AER: Use "aer" variable for capability offset
  PCI/AER: Remove redundant dev->aer_cap checks
  PCI/AER: Remove redundant pci_is_pcie() checks
  PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership
  PCI: tegra: Fix runtime PM imbalance on error
  PCI: vmd: Filter resource type bits from shadow register
  PCI: tegra194: Fix runtime PM imbalance on error
  dt-bindings: PCI: Add UniPhier PCIe endpoint controller description
  PCI: hv: Use struct_size() helper
  PCI: Rename _DSM constants to align with spec
  PCI: Avoid FLR for AMD Starship USB 3.0
  PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0
  x86/PCI: Drop unused xen_register_pirq() gsi_override parameter
  PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port
  PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link
  PCI: dwc: Fix inner MSI IRQ domain registration
  PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname()
  ...

Fixes coccicheck warning:

  fs/hpfs/buffer.c:56:2-3: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Mikulas Patocka <mikulas@twibright.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull workqueue updates from Tejun Heo:
 "Mostly cleanups and other trivial changes.

  The only interesting change is Sebastian's rcuwait conversion for RT"

* 'for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: use BUILD_BUG_ON() for compile time test instead of WARN_ON()
  workqueue: fix a piece of comment about reserved bits for work flags
  workqueue: remove useless unlock() and lock() in series
  workqueue: void unneeded requeuing the pwq in rescuer thread
  workqueue: Convert the pool::lock and wq_mayday_lock to raw_spinlock_t
  workqueue: Use rcuwait for wq_manager_wait
  workqueue: Remove unnecessary kfree() call in rcu_free_wq()
  workqueue: Fix an use after free in init_rescuer()
  workqueue: Use IS_ERR and PTR_ERR instead of PTR_ERR_OR_ZERO.

Pull cgroup updates from Tejun Heo:
 "Just two patches: one to add system-level cpu.stat to the root cgroup
  for convenience and a trivial comment update"

* 'for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: add cpu.stat file to root cgroup
  cgroup: Remove stale comments

Pull integrity updates from Mimi Zohar:
 "The main changes are extending the TPM 2.0 PCR banks with bank
  specific file hashes, calculating the "boot_aggregate" based on other
  TPM PCR banks, using the default IMA hash algorithm, instead of SHA1,
  as the basis for the cache hash table key, and preventing the mprotect
  syscall to circumvent an IMA mmap appraise policy rule.

   - In preparation for extending TPM 2.0 PCR banks with bank specific
     digests, commit 0b6cf6b9 ("tpm: pass an array of
     tpm_extend_digest structures to tpm_pcr_extend()") modified
     tpm_pcr_extend(). The original SHA1 file digests were
     padded/truncated, before being extended into the other TPM PCR
     banks. This pull request calculates and extends the TPM PCR banks
     with bank specific file hashes completing the above change.

   - The "boot_aggregate", the first IMA measurement list record, is the
     "trusted boot" link between the pre-boot environment and the
     running OS. With TPM 2.0, the "boot_aggregate" record is not
     limited to being based on the SHA1 TPM PCR bank, but can be
     calculated based on any enabled bank, assuming the hash algorithm
     is also enabled in the kernel.

  Other changes include the following and five other bug fixes/code
  clean up:

   - supporting both a SHA1 and a larger "boot_aggregate" digest in a
     custom template format containing both the the SHA1 ('d') and
     larger digests ('d-ng') fields.

   - Initial hash table key fix, but additional changes would be good"

* tag 'integrity-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: Directly free *entry in ima_alloc_init_template() if digests is NULL
  ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()
  ima: Directly assign the ima_default_policy pointer to ima_rules
  ima: verify mprotect change is consistent with mmap policy
  evm: Fix possible memory leak in evm_calc_hmac_or_hash()
  ima: Set again build_ima_appraise variable
  ima: Remove redundant policy rule set in add_rules()
  ima: Fix ima digest hash table key calculation
  ima: Use ima_hash_algo for collision detection in the measurement list
  ima: Calculate and extend PCR with digests in ima_template_entry
  ima: Allocate and initialize tfm for each PCR bank
  ima: Switch to dynamically allocated buffer for template digests
  ima: Store template digest directly in ima_template_entry
  ima: Evaluate error in init_ima()
  ima: Switch to ima_hash_algo for boot aggregate

Allow user to use alternative implementations of compression tools,
such as pigz, pbzip2, pxz. For example, multi-threaded tools to
speed up the build:
$ make GZIP=pigz BZIP2=pbzip2

Variables _GZIP, _BZIP2, _LZOP are used internally because original env
vars are reserved by the tools. The use of GZIP in gzip tool is obsolete
since 2015. However, alternative implementations (e.g., pigz) still rely
on it. BZIP2, BZIP, LZOP vars are not obsolescent.

The credit goes to @grsecurity.

As a sidenote, for multi-threaded lzma, xz compression one can use:
$ export XZ_OPT="--threads=0"
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Many applications check for available kernel features via:

  - /proc/modules (loaded modules, present if CONFIG_MODULES=y)
  - $(MODLIB)/modules.builtin (builtin modules)

They fail to detect features if the kernel was built with CONFIG_MODULES=n
and modules.builtin isn't installed.

Therefore, add the target "_builtin_inst_" and make "install" and
"modules_install" depend on it.

Tests results:

  - make install: kernel image is copied as before, modules.builtin copied
  - make modules_install: (CONFIG_MODULES=n) nothing is copied, exit 1
Signed-off-by: Jonas Zeiger <jonas.zeiger@talpidae.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When System.map was generated, the kernel used mksysmap to
filter the kernel symbols, but all the symbols with the
second letter 'L' in the kernel were filtered out, not just
the symbols starting with 'dot + L'.

For example:
ashimida@ubuntu:~/linux$ cat System.map |grep ' .L'
ashimida@ubuntu:~/linux$ nm -n vmlinux |grep ' .L'
ffff0000088028e0 t bLength_show
......
ffff0000092e0408 b PLLP_OUTC_lock
ffff0000092e0410 b PLLP_OUTA_lock

The original intent should be to filter out all local symbols
starting with '.L', so the dot should be escaped.

Fixes: 00902e98 ("mksysmap: Add h8300 local symbol pattern")
Signed-off-by: ashimida <ashimida@linux.alibaba.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Commit d503ac53 ("kbuild: rename LDFLAGS to KBUILD_LDFLAGS") missed
to update the documentation.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>